Osx lion or mountain lion

I'm ready to upgrade my operating system to OS X Lion.  But should I wait til Mountain Lion launches in July?  What are pros and cons?

Busy days ahead for you ...
SL is needed to download Lion or ML from the App Store.  You can buy the SL disk here:  http://store.apple.com/us/product/MC573Z/A
Buy it now before ML hits and the SL disks drop off the online store.
Then I think you need to follow the advice I give below to ensure you have a valid SL install before going to Lion or ML.
Assuming your hardware can take ML or Lion.  Check the hardware requirements.
Following on Glenn's advice ...
You can clone your SL to an external drive and boot from it using the "option" key.  Then upgrade the internal to Lion or ML which will preserve your current install.   That way you can build the new OS without losing what you have.  This is not bashing Lion or ML, just suggesting you may need a few days to get all of the PPC application or other hurdles handled.  You would always be able to clone the xternal SL back onto the internal in case of "really bad things".

Similar Messages

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • Looking to move data from OSX 9 to Mountain Lion using external hard drive?

    Looking to move data from OSX 9 to Mountain Lion using external hard drive?

    Thanks.  I'd like to get rid of this OSX 9 after retrieving a few files.  If I wanted to erase it's hard drive before I do so, would powering off then on again and immediately start tapping the F10 button do the trick as it does with a PC?

  • I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8.  Can I upgrade to Snow Leopard, Lion, or Mountain Lion (to improve speed

    I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8.  Can I upgrade to Snow Leopard, Lion, or Mountain Lion (to improve speed)?  I'm willing to purchase if necessary and it really helps.

    MacBook upgrade possibilities - https://discussions.apple.com/message/19577869 - "The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion."
    Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion -  https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from the online store.

  • My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion

    My 2011 iMac doesn't work with display sleep anymore after installing a clean copy of OSX 10.8 Mountain Lion.
    I have it on upper left corner but it take the whole computer to sleep, no way to turn just the display.

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • Will lightroom cc run on the Mac operating system OSX 10.8 mountain lion?

    will lightroom cc run on the Mac operating system OSX 10.8 mountain lion?

    You haven't mentioned which version of Lightroom, but anything from 4 up should be no problem. Here's a link to the Lr5 requirements http://www.adobe.com/uk/products/photoshop-lightroom/tech-specs.html

  • How can i down great a new mac pro 13" retina with osx 10.8 Mountain Lion to osx 10.7 lion?

    Hi Guy's,
    Can you help me with the following problem please?
    I have a new Macbook pro 13" with retina and a ssd HD.
    On this machine is a osx 10.8 Mountain lion installed.
    I need to down great this machine to osx 10.7.3. lion
    Bud it won't work.
    I use a usb key to bood to 10.7.3 it works always on a normal macbook pro.
    Can someone help me on this please?

    You can't. No new Mac can run any older version of OS X then what originally came on it.
    There are a few exceptions but to do so you would need a model that also came with the older OS at some point but then you would also need the older OS X installer files. Which aren't available to a Mac that came with a later OS X version.

  • Will CS5 work with Max OSX Snow Leopard, Lion, and Mountain Lion?

    Will CS5 work with Max OSX Snow Leopard, Lion, and Mountain Lion?

    Hi,
    You can check system requirement for CS5 in link : http://www.adobe.com/store/en_us/popup/software/creativesuite/mastercollection5/systemreqs .html
    Regards,
    Jatin Dembla

  • HT4854 When trying to download Mountain Lion, I get the following message:  "We could not complete your purchase.  OSX 10.8 Mountain Lion requires a Core 2 Duo, .... processor."  However, my Mac lists a 2GHz Intel Core Duo as its processor.  Help?

    When trying to download Mountain Lion, I get the following message:  "We could not complete your purchase.  OSX 10.8 Mountain Lion requires a Core 2 Duo, .... processor."  However, my iMac lists a 2GHz Intel Core Duo as its processor.  Help?

    Welcome to the Apple Support Communities
    Mountain Lion is a 64-bit operating system, and an Intel Core Duo processor is only 32-bit, so you can't use Mountain Lion on your Mac. You can keep using your actual OS X version or buy a new Mac if you want Mountain Lion

  • Lion or Mountain Lion or Mavericks?

    Hi I just purchased a macbook pro -love it- now it has osx 10.8.5...is that Lion or Mountain Lion?
    and should i upgrade to Mavericks?
    if so why?
    I appreciate any answer.
    I am used to Pc and that is why i need to ask questions...
    thank you and have a wonderful day!

    New Macs come pre-installed w/Mavericks.  Where/who did you purchase your comp from? 
    OS 10.8.5 is Mountain Lion.  OS 10.9 is Mavericks.  OS 10.7.x is Lion. 

  • Can the new Macbook Air and Macbook Pro with retina display that run OS X Lion or Mountain Lion run Windows through bootcamp?

    I was just wondering.. since the new macs have omitted the optical disk drives is it still possible to install windows on a mac running OSX Lion and Mountain Lion?

    Yes. Read the Boot Camp Install instructions for the MacBook Air which also does not have an optical drive. Put Windows onto a thumb drive or external optical drive and make these bootable. Then follow the instructions for installation from the thumb drive or external optical drive.
    http://www.apple.com/support/bootcamp/

  • Update was clean from Lion to Mountain Lion

    Update was clean from Lion to Mountain Lion;
    I never had such a experience with a windows machine

    Before purchasing the upgrade, be certain that your MacBook meets the minimum hardware requirements listed in Step 1 of the following page:
    http://www.apple.com/osx/how-to-upgrade/
    If you're not sure which model of MacBook you own, first use , About This Mac, More Info... Hardware Overview to determine the Model Identifier.
    This Wikipedia MacBook entry will help you decode that Hardware Identifier into the terms Apple uses at the above Mountain Lion upgrade link, like 'Mid 2009' and so on.
    http://en.wikipedia.org/wiki/MacBook

  • Just bought a new iMac today but came with Lion not Mountain Lion..do I really have to pay for the update?

    I just bought the new iMac at BestBuy but it came with OSX 10.7 Lion not OSX 10.8 Mountain Lion..Literally had it 3hrs now... Do I really need to pay to upgrade??

    Go to the App Store, sign in to your account, and on the "Quick Links" on the right, click "Redeem".
    Try entering your "claim number" there.

  • Hi i upgrade from lion to mountain lion to day on my mini mac,Since the upgrade i am getting no sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever

    Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
    I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.

    Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.

  • I need to have both Snow leopard and Lion...Mountain lion running on my iMac.  How do I install Lion or Mountain lion on an Ext H D and boot from it?

       My software is obsolete (and now dead) in 10.7 so I need to keep Snow leopard alive to run that- but now things like TurboTax are dropping support for 10.6 or lower and I have to have lion or Mountain Lion available.  I actually downloaded Lion onto a thumb drive but never installed it when I found out that it would immedaitely render all my FreeHand files inaccessible (years of work!),  Now that I am forced to have an OS above 10.6 I was hoping I could install whichever--Lion or Mountain Lion onto an external hard drive and figure  out how to boot from that (found  something in archives I think, but I need words of one syllable or less).  This way I could, ideally, boot from either the External hard drive in the higher OS when needed, or from the internal hard drive when I need to use Snow leopard.  There is a long story here, but I think this is the gist.  I wasn not sure if this should be asked here or in either Lion or Mountain Lion (both of which I have, essentially, ignored since I would not be moving up until I could figure out how to access those old files of forms and drawings00but now I have no choice.  I am panicking now that I HAVE to make the move anbd cannot afford to buy another  Mac just to keep two separately running.  Any help would be greatly appreciated.  i asked Apple when Lion came out and they said there was no way to partition (even if I KNEW how to do that) the haaard drive and install both on my iMac-- but I "think" this is a bit different and possible???   Thanks  (once/if I figure this out, I need to figure out how to back-up but that is another matter)

    You need to move to Windows 7, because Apple is now releasing a new OS X version annually and it's playing havoc with people's hardware and software.
    Windows 7 will get support until 2020, that's 8 years of software stability, however you do need to make System Restore disks, boot disk and another on a hard drive to self restore (like TimeMachine is for OS X)
    Apple has no plans to change their currrent behavior as all they care about is selling new hardware with a shiny new OS X verison on it.
    If you wait to move, what will happen is you'll lose that full 8 years and will have to swtich to a newer Windows sooner
    Windows 7 machines are still widely avaialble, despite Windows 8 (a failure) being pushed currently.
    Running three OS X operating systems on one machine is quite a chore reserved for only seasoned computer geeks, then it's only going to last X months as the next OS X version will be released, then the next a year after that.
    Another method would be to get a virtual machine software (virtualbox is free) and install Windows 7 into that to ease your transitition if you cant' spring for a Windows 7 machine, preferablly a tower that will last a long time.
    Here is a method to run Snow Leopard in Parallels, however it's a unapproced hack and not for the comptuer newbie.
    http://forums.macrumors.com/showthread.php?t=1365439
    We have no control over Apple's OS X release cycle, nor the third party developers who make their own decisions what to support.
    Our only choice as users to stop using both products and seek software/hardware stability.

  • I have a hdd from late 2009 that I upgraded from leopard to snow leopard to lion to mountain lion.  I want to upgrade the hdd to ssd.  Do I need to buy a new copy of mountain lion to install on the ssd?  If not, then what is the procedure to transfer?

    I have a hdd from a late 2009 mbp.  I upgraded from leopard to snow leopard to lion to mountain lion.  Now I want to upgrade to a ssd.  Do I need to purchase a new copy of mountain lion to go on my new ssd? If I don't, then what is the procedure to transfer mountain lion with my 4 user accounts onto the new ssd from the hdd?
    I'm confused on if I can use the recovery hd on a thumb drive to install mountain lion on my ssd.  Will it be pheasible with so many OS X upgrades?  And then how do I get my user accounts onto the ssd from the hdd.  Do I use migration assistant?  Do I need to make a time machine backup first?  Should I use something called Carbon Clone or something like that?
    Thanks for reading

    If you have a cable that connects and external HDD to the MBP, it will do.  If it is something like this, an  enclosure will not be needed for the swap:
    An enclosure allows you to use your old HDD for storage or backup purposes.  The cable will not. 
    Here are instructions as to how the swap can be performed using DISK UTITY.  Substitute You cable for the enclosure in same:
    INSTALLING A NEW HDD IN A MBP
    1. Make certain that you have backed up all of your important data.
    2. You will need a HDD enclosure.  One with a USB connection will do.  A 9 pin Firewire is better.
    3. Install your new drive in the enclosure and connect it to your MBP.
    4. Open DISK UTILITY>ERASE.  From the left hand column drag the new drive into the 'Name' field.  Make sure that the format is 'Mac OS Extended (Journaled)'.  Click on the 'Erase' button.
    5. Click on the 'Restore' button (on top).  Drag the old drive into the 'Source' field and the new drive into the 'Destination'  field.  Click on the 'Restore' button on the bottom right hand corner.
      Depending upon the amount of data you are transferring, this may take a couple hours or more.  A Firewire will speed up the transfer.  This will result in both drives having identical information on them.
    6. After the data transfer has completed, you may swap the drives.  Start the MBP and you have finished the installation.  The initial boot may take a bit longer than you are accustomed to, but that is normal.
    7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.
    If there is any confusion on your part, post back.
    Ciao.

Maybe you are looking for

  • Can I sell books made with iBooks Author in the UK iTunes store?

    Hi all, I'm a UK-based musician who publishes a range of tuition books on playing the bass guitar. I've spent the last few months devleoping one of these books in iBooks Author, and the end results are really impressive. I submitted the book to the i

  • Issue in adding BI Report as portal favourite

    Hi, The following thread is posted by someone already but there is no response. I have similar problem and just reposting it again. We use a Federated Portal Network where the Enterprise Portal (EP) is the Consumer Portal and the BI Portal (BP) is th

  • How to consume web service in jdev 10.1.3 and OAF 12.1.3

    I have a question regarding consuming web service in jdev 10.1.3. I have a WSDL url and want to generate java stub files from the wsdl. How do I do this using jdev?

  • No Javadocs in Creator 2

    I'm new to java, attempting to learn after many years experience with C++. I've downloaded Sun Creator 2 and it works fine, except the javadocs seem to be mising. How can I get them integrated into Creator?

  • Can Reader 11 be installed (mostly) in a partition of a user's choice?

    Can Reader 11 be installed (mostly) in a disc partion of a user's choice on a Wintel (XP-32) PC?  The installer appears to be so inflexible that a user has no choice in how the installation goes forward.