OSX Mavericks not able to print to Canon Image ProGraf 825?

Since upgrading to Mavericks, I have not been able to print to our Canon Image ProGraf 825.
anybody else having similar issues?

Today I went Canon's USA website for this printer's drivers, and when it asked for what operating system, I left it on OSX (Detected), and there is now an imagePROGRAF Printer Driver Update Ver.1.00 for OS X v10.9.
I installed it and it now works.

Similar Messages

I am not able to print in cannon ir series 2520 after Maverick update

I am not able to print in cannon ir series 2520 after Maverick update, printer is in pause and even after resuming it it dosent work. Pl help
Same case with the projector not able to connect it.

The driver link you have provided will work. But we have found that if the previous driver is installed on the Mac, the user selects this older driver PPD when adding the printer instead of the new driver PPD because it has UFR in the name, which the new v10.2 driver does not.
So as mentioned this new version UFR2 v10.2.1 includes an uninstaller to remove the old driver and PPDs, thus reducing the chance of the user making a mistake when adding the printer. The next issue is then getting them to select the correct protocol.
I expect that Canon USA will update their site over the weekend to provide this latest version of the driver. Canon Oz gets its drivers direct from Canon INC so that's why we are a little bit earlier with some updates.

Not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore

Maybe someone can help me.
Yesterday I noticed, that I am not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore (InDesign Version 6.0.4).
At the end of january I printed double sided the last time and it worked.
Right now, I can choose "double print", but the system does not keep it. I tried with different documents already and it didn't work, so it can't be just that one file. Since everything works out of other programs like Adobe Acrobat or MS Word, it can not be printer bug; it's pretty much my impression that it must be a InDesign bug.
So if somebody has any idea .... please help :-(
Thank you in advance
red witch

Sorry that I forgot about the operating system, but I am new so you may forgive me about that ...
I am working with a PC. Last week I was working in a document and suddenly the side window did not show the sides anymore. Our IT department took a file from my collegues PC and copied it to my PC, after this the sides where shown again. Since my colleque has got the same basic problem, I think something went wrong on the installation. I am not the expert with this installation stuff.
Bye
red witch

Not able to print PDF report from Oracle APPS

adcmctl.sh version 115.17.
We have a network printer HP Laserjet 4250 which is configured on our concurrent manager server of RH Linux OS. We are using HP LASERJET 4250 Postscript driver. We are able to print PDF's directly however through CC manager we are not able to print reports in Proper PDF format. Has anyone faced such an issue with Oracle Apps?

user11996936 wrote:
Has anyone faced such an issue with Oracle Apps?Maybe. Maybe not. Ask to the proper forum. Here you are in Peoplesoft forum.
Nicolas.

Not able to Print the report

Hello All,I am not able to print the report. When i click on the icon a blank form opens up. Is there something i need to do to see the form with some details.Thanksram 

Hi Ram, Can you give me some more details around your issue? How exactly are you building the viewer? Are you using the JSP Page Wizard that comes with Crystal Reports for Eclipse? If so, then can you tell me what application server you are deploying to? All of these pieces may help narrow down the issue. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

About 2 weeks ago, not able to print all pages in a .pdf document using internet explorer 11?

About 2 weeks ago, not able to print all pages in a .pdf document stored in a folder (I'm using Windows 7)?
It only prints 1 page then my Brother MFC-J4510DW Printer says "Please put another piece of paper in the feed slot"....the problem is the print setting is set to "manual mode" in Windows 7 rather than "general setting". If you try to change the setting to "general", it will not accept the change.

Hi.
I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages, I end up having to bring up the print dialogue multiple times and have the user set watermarks each time.
I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window. This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once. However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone. This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc. I do not really want to include these icons on the toolbar. Is there a way to remove unwanted icons from the toolbar, or make them invisible?
Hope this makes sense. Thanks for your help.
Mary

I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. What do I do to fix this?

I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. I downloaded the camera raw and dng converter for it, but realized in the process that the one I downloaded does not work with my Mac version, 10.9.5.

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Mylenium

Not able to print purchase order..

Dear All,
I am not able to print one import purchase order.
I have checked everything and also able to print another import Purchase orders..but particular this PO print out is not coming.
I have deleted message and again created the same..also condition record is maintained...
Not able to see print preview also (Not generating)
What could be the reason?
Please help..
Naren

Hi Naren,
try the note :111062.
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=111062]
Please check the setting mentioned in the note and revert.
Thanks,
Hrishi

Not able to print on Purchase order whatever we fill in item text

not able to print on Purchase order whatever we fill in item text, from where can we link to get printed item text on purchase order

while doing in quality whatever we fill in text in item details of p.o we are getting it printed on p.order
but same thing when we are doing in production we are not able to print on purchase order. where we should look out
for e.g in spro-mm-purchasing-purchase order..

Not able to print reader file

When I convert MS Word files to Adobe Reader files, some people are not able to print them. Some of the content prints for instance, but some is missing. The graphics may print, but the text is missing.
Any ideas?
Thanks,
Brian

Thanks for the response Michael,
Here is a file I converted from Word to a PDF that will only print the graphics.
I am using Word 2007 and Adobe Reader 9 Pro. I have the CS4 suite. When I save, I am using the following parameters:
Convert Document Information
Enable Accessibility and Reflow with tagged Adobe PDF
Create Bookmarks
Convert Word Headings to Bookmarks
I should add that changing and eliminating these parameters make no difference.
Thanks,
Brian

Single user is not able to print PDF files.

I have the following situation at our organisation for one of our users.
Printer:
Kyocera FS1030D
Kyocera KM-C3225
I have one user that is not able to print any PDF files in our network. (User Chris)
Printing a Word document or Notepad works fine.
To be specific:
The user is mainly using Windows 7 Pro 64 bits.
We also have a Citrix environment.
When this user is trying to print a PDF file we follow the following steps:
Open any PDF file.
Go to: File -> Print -> Select the printer to use.
Hit Print button.
Now the pop up comes up loading the PDF file to be printed. (The percentage bar)
After this bar disappears nothing happens.
The print que does not show on the bottom right hand of the screen.
If you open the printer que there is no document that needs to be printed.
We tested printing a PDF file on a different computer with user account Chris, but no success.
We tested printing a PDF file on the same computer with another user account, success.
We tested printing a PDF file in our Citrix environment (still on Chris his pc), success.
So as a wrap up: Printing with another user account works fine. The issue seems to be located in the user profile, but is not specific to a single computer.
We tested the following.
Print as Image setting.
Remove the print drivers and reinstalled them.
Renamed the Windows folders where the drivers are installed.
Removed Adobe Acrobat version 9 and installed version 10.
Any suggestions are welcome.

Hi Bill@VT,
Thanks for your reply. I have checked and the current installed version is 10.1.4. I tried updating but I get the message that the there are no new updates available.
Also I tried to find a 64 bits download but unfortunately I cannot find a 64 Bits install file.

Not able to Print Invoice thru Crystal Integration

Hi All,
Could anybody help me on the issue given below.
One of our client Issue while printing from crystal Integration in SAP Business One. I can able to view the crystal report through Crystal Integration but i am unable to print the document.No Error is getting displayed .If i am printing from PLD it's working fine .After exporting to PDF from crytal integration i can able to Print but not able to print directly from the crystal Integration.
Thanks,
Vishwanath

Vishwanath,
Please post your question in this forum ...
Reporting and Printing
Eddy

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

it says "the document could not be printed". "There were no ages selected to print".
I selected "all". I always tried selecting pages "1-3".
The only choice that works is current page. Very strange.

Not able to print in duplex

On this windows 7 PC, Since I upgraded from Acrobate Reader 8 to Adober 9 and reader10, I am not able to print in duplex mode. I works fine from another computer Windows XP using Adobe Reader 6.0 using the same shared and WiFi printers.
Looking at the document file property in the advance tab, in the print dialog preset window, I am not able to change the duplex mode from grayed "Simplex" to Duplex.
How do I fix this problem?
See screen print picture

Hi,
The HP Deskjet 2520 does not support automatic print duplexing and therefore any checkbox will not apply for such.
You may perform manual duplexng on Mac OS using the Pages to Print option as following:
From the file used to print click the File menu and select Print.
NOTE: The Print window might be minimized. Press on Show Details to show any available print option.
From the main drop does menu select Paper Handaling.
The main menu will usually list the program name (e.g. TextEdit).
Will appear as Copies & Pages within Microsoft Office applications.
Set the Pages to Print option as Odd Only, as well set the Page Order as Automatic and click on Print.
After the odd-numbered pages have printed, reload the paper with the printed side facing up and repeat the process above by setting the Pages to Print as Even Only this time.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Not able to print anything on ATG Rest webservices

Hi..I am new to ATG Rest.. Just for the heads up, i followed following steps :-
1 ) Added rest module to MANIFEST.MF
2) Created a custom class which looks like this -
package com.sgs.utils;
import atg.nucleus.GenericService;
public class SGSdummy extends GenericService {
public void dummy() throws Exception {
 logDebug("sdbfhj");
3) Mapped it to the property file -
$class=com.sgs.utils.SGSdummy
$scope=global
loggingInfo=true
4) Configured the security for above component in restSecurityConfiguration.xml
<rest-security>
<resource component="/atg/commerce/order/dummy" secure="false">

<method name="dummy" secure="false"/>
</resource>
</rest-security>
I commented acl as i really didn't need it for a POC plus it was throwing 401 unauthorized.
5) Now I am calling it from chrome's Advanced Rest Client. However, status is 200 OK but I am not able to print a logDebug or sysout in my SGSdummy class.
 When i check console, it says "Depth 0 is greater than maximum depth 0"
 I tried to change maxDepthAllowed in configuration.properties but in vain..I need help to proceed.

Now I am trying to create a REST request using custom client. I believe it should be a POST request as I am trying to call a method. My custom client looks like this :-
package atg.rest.client;
import java.io.IOException;
import java.util.HashMap;
import java.util.Map;
import atg.rest.client.RestClientException;
import atg.rest.client.RestComponentHelper;
import atg.rest.client.RestResult;
import atg.rest.client.RestSession;
public class RestDemoClient {
/** The m username. */
private String mUsername;
/** The m password. */
private String mPassword;
/** The m host. */
private String mHost;
/** The m port. */
private int mPort;
/** The m session. */
private RestSession mSession = null;
 * Instantiates a new method call by rest.
public RestDemoClient() {
 * Execute.
 * @throws RestClientException the rest client exception
private void execute() {
 mSession = RestSession
 .createSession(mHost, mPort, mUsername, mPassword);
 mSession.setUseHttpsForLogin(false);
 Map<String,Object> params = new HashMap<String,Object>();
 params.put("atg-rest-input", "json");
 RestResult result = null;
 try {
 result = RestComponentHelper.executeMethod("/atg/rest/SGSdummy", "addOrder", new
 Object[] {}, params, mSession);
 } catch (RestClientException e1) {
 System.out.println(e1);
 try {
 if (result != null && result.getResponseCode() == 200) {
 System.out.println("Executed Successfully.");
 } else {
 System.out
 .println("Error while execution : Error Code ["
 + result.getResponseCode()
 + "] and Message ["
 + result.getResponseMessage() + "]");
 } catch (IOException e) {
 System.out.println("Error while execution Successfully.");
 * @param args
public static void main(String[] args) {
 RestDemoClient stepUtils = new RestDemoClient();
 stepUtils.mUsername = "admin";
 stepUtils.mPassword = "admin";
 stepUtils.mHost = "localhost";
 stepUtils.mPort = 8080;
 stepUtils.execute();
But everytime i execute this, I get following exception :-
atg.rest.client.RestClientException: java.io.IOException: Unauthorized Server returned HTTP response code: 401 for URL: http://localhost:8080/rest/bean/atg/rest/SGSdummy/addOrder
Exception in thread "main" java.lang.NullPointerException
at atg.rest.client.RestDemoClient.execute(RestDemoClient.java:64)
at atg.rest.client.RestDemoClient.main(RestDemoClient.java:82)
I tried different set of credentials but nothing seems to work out for me.
However it always works fine for GET requests. I am able to see status as 200 OK but it never hits my addOrder() method in SGSdummy class, hence I am not able to print sysout in that method. For status 200 OK GET requests, my logs say "[JSONOutputCustomizer] Depth 0 is greater than maximum depth 0. Outputting object of class java.lang.String as string rather than continuing to nest."
Can you give me some pointers how to run it without any errors plus it should print a random sysout in my custom class. Thanks

OSX Mavericks not able to print to Canon Image ProGraf 825?

Similar Messages

Maybe you are looking for