OSX Mavericks on a Macbook Pro 2008: is it possible?, OSX Mavericks on a Macbook Pro 2008: is it possible?
I've got a Macbook Pro 2008 with Snow Leopard installed, 4Gb Ram and 500Gb DD ... is it possible or recomendable to update to OSX Mavericks? Compatibility says: OS 10.6.8 or later. I'm just that 10.6.8
Can you help me out? Thank you!
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
Check to make sure your applications are compatible. PowerPC applications are no longer supported.
Application Compatibility
Applications Compatibility (2)
Similar Messages
-
So it happens that since Lion and now, of course, Mavericks, the DVI to Video/S-Video support is not only unsupported, but crashes your 2008 Macbook Pro (MacbookPro3,1, 15 inch) if you plug the official adaptor in. The screen went with artifacts and the computer needed a hard reset.
What happened after that is that the computer wouldn't start. Of course I immediately did SMC and PRAM resets without results. No leds, no start chime, nothing. Only method found was to bypass the SMC (which is done via holding de power button with battery/power cord unplugged, then plugging power cord still holding it, releasing, and pressing it again). Everything is then ok except, of course, everything controlled by the SMC (no battery, leds, fans at full speed). Did Apple's Hardware Check, full test, no errors found. Reflashed manually the SMC via an EFI Shell, as found on the internet: the SMC is in "U" mode and can't be correctly reflashed. After that, I unmounted the logic board looking for any kind of corruption; found nothing.
In resume, did everything I could for a week. The last thing I found out is that plugging the adaptor itself, without connecting to any external device (no TV), still crashes the screen with artifacts. I beleive this has to do with the adaptor having inside some chips, since it's function is not to rewire cables, but to convert one signal to another. What happens after that and a hard-reset again, and after that hard reset the now installed rEFIt screen doesn't appear, so I believe that, effectively, connecting the adaptor affects your computer's boot system somehow.
I know Apple doesn't support computers old as these anymore, and I don't even care they quit the Video-out support with their new free OS, but if by doing that you enable your own official 20-30€ adaptor to kill an otherwise fully functional Macbook, that's foul play.
Any advice will be greatly received. Thanks for reading.Forgot to mention that the DVI adaptor works ok if plugged to a DVI monitor, so it's not a physical problem from the DVI output plug.
-
I upgraded my macbook pro from OS Lion to OS Mavericks. When unplugged, it heats up exceedingly and the battery life is extremely short. What to do?
Installation of the new OSX is very heavy hdd load, in addition spotlight reindexes all the files on your computer - it may be a few hours. If in the future will be the same macbook hot, you should contact your nearest Apple Authorized Service Provider.
May be required to clean notebook cooling system.
You can also install any monitoring utility sensors to your mac such as Hardware Monitor and look at the value of the temperature sensors.
Alex
Apple Certified Support Professional -
Webcam not working for Macbook Air 2013 after upgrading to OSX Mavericks? Yahoo/ Google/Skype cam chats not working. Facetime works though. Any updates of Mavericks released to fix this?
I have a MacBook Pro Retina display: 15.4-inch late 2015 with OS X Mavericks install, only on second week.
Insight works on FaceTime, Skype, but yahoo program does not show insight cam in dropped down.
Now when I got my new MacBook Pro, I down loaded all new Skype (worked tested), FaceTime (Worked Tested), Yahoo (not worked)
Fix:
With the new Maverick you have to use there messager program Version 8.0 (4218). Once I add my yahoo account video works again.
It also supported AOL, AIM, Google Talk, Jabber.
Guess I miss it frist time... hope this helps... -
I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?
It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere. -
Can somebody please advise urgently...
I backed up my entire hard-drive of my macbook pro - just prior to installing osx mountain lion.
I put everything into a folder on my desktop - then backed it up onto an external drive. Once this was done - i deleted the folder off my desktop - and following this - things started to go all weird...pages hanging, the coloured 'wheel of death' appeared for ages. So i had to employ a 'hard-boot' restart - as i had not other options.
I'm pretty sure i made copies of of files/apps/folders etc - however not so sure now as i cant even start up my laptop!!!
Can somebosy please help me urgently??!!!Got the exact same problem, and I also did this operation many times before, from 500Gb to 750Gb, and then from 750Gb to 1 Gb. Not My HD got a little such complaining about bad sectors when in windows bootcamp, but still runs fine though.
So I bought a new 1Gb drive exactly same drive as the one thats getting sick. I did the clone thing, with super duper, CCC, DU, but no matter it will not boot when i move the new drive inside the macbook…….**** thing exuse me, but wasted so much time.
Now I get this strange feeling that something must have changed in the macbook itself. Just wondering if this could be a EFI "mac bios" prevention thing, they made just to sell more new computers, when you can't improve or fix your old one.
If so, then its pretty scary. If not then I simply can't figure out why this suddenly becomes a problem for so many people, as I see so many posts about this!!
BR Pete -
My MacBook Pro has an update available for Maverick I think it was
My MacBook Pro had an update available for the Maverick and I did not hit the update because kept erroring out. I was updating other things and decided to hit it too and that time finally updated. Then right after the laptop looked for updates and did another one. It asked to install whatever the upstate on the OS or X was and then took 50 minutes to install it then more time to complete it. When computer finally came back on it asked for my apple ID for iCloud. I typed it in several times correct fly but it would not take it and finally chose forgot. It went to a new blank box with the asterisk wheel winding around and choice of continue highlighted below next to un highlighted back. Now I am frozen here and can't do anything with laptop. Will not allow me to highlight and choose back. Can't get it to continue. Tried esc. Tried force close and tells me I must quit setup assistant first. Can't get top controls to show up. Finally got a second desktop background to come up and pushed F 3 and tried to use buttons below and above and will pull-up things like Safari but can't use it and can't pull up the set up assistant this way to choose quit either. So I am just stuck. Help please, anyone. How do I get use of my laptop again??
I don't really know if it is maverick or what number OS it is. Just know had picture of mountain lion.That sounds like you have installed Mavericks over the top of Mountain Lion?
Do you know what version of the OS was on the laptop before you started?
Do you have any backups from before the 'update', either a Time Machine disk or a full copy (a.k.a. bootable clone)?
Mavericks is not a simple update, despite Apple's constant nagging to 'update' to it. It's possible that the Mavericks installer has overwritten the old OS, but I suspect it may simply need you to create a user account with the setup assistant. It's a very good idea to make a full backup before applying any major OS upgrade.
I would reboot, fill out the details for setup assistant and when it is time to enter the user details enter a new account name (this will be your admin account). The assistant should then create a user account that you can login with to look at the contents of the Mac's disk.
Then you should open the /Users folder (Use 'Finder menu > Go > Go to folder…' to open /Users) & see if the old users home folders are still intact. You may also want to see if any third party Applications are still installed.
If the old data is intact, and the account isn't listed in 'System Preferences > Users & groups' it can be recreated, provided you make sure to use the same 'shortname' as the Users home folder.
If the data is gone, I'm afraid it's possible that it is lost, I can't see this being likley because the 10.9 installer will not delete user data without some stern warnings & advanced user interaction.
An alternative would be to connect this Mac to another Mac & look at the disk to see if the data is still there before you create the user acount. Do you have access to another Mac? You may be able to use Thunderbolt or Firewire to see this Mac's disk on another working Mac.
Target disk mode
http://support.apple.com/kb/HT1661 -
CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?
Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html -
My Apple TV is not mirroring my Macbook Pro after I installed OS X Mavericks
My Apple TV is not mirroring my Macbook Pro after I installed OX X Mavericks?
Installing Maverick does not change the hardware requirements.
Did it work prior to installing Maverick?
Does the device meet the hardware requirements?
Supported Macs
AirPlay Mirroring in OS X takes advantage of the hardware video encoding capabilities of 2nd and 3rd Generation Intel Core processors. Hardware video encoding allows AirPlay Mirroring to efficiently deliver high frame rates while maintaining optimal system performance. The following Mac models have processors that support AirPlay Mirroring:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer) -
I just purchased a MacBook Pro Retina. Checked my OSX and it is version 10.8.1... trying to find a way to upgrade to a higher version. In the app store it doesnt show the update nor downloading the new Mountain Lion OXS doesnt work. Please help
hienn,
Not yet. There was an upgrade page to 10.8.2 for the late 2012 models but it's down now. I have to assume that Apple pulled it because of some bugs. I would look for something next week, more likely than not. In the meantime, the OP should be good with 10.8.1 until the update shows up again.
Clinton -
I erased my 2012 MacBook Pro hard drive, what version OSX do I need to reload ?
I erased my 2012 MacBook Pro hard drive, what version OSX do I need to reload ?
Mac OS X 10.7.5 or newer, or see below. Press the Command and R keys at startup to load the recovery partition, or the Option, Command, and R keys to reinstall the computer's original OS.
(106272) -
Can Macbook Pro 15" Retina (Early 2013) with Mavericks display HIDPI on external monitor?
Can Macbook Pro 15" Retina (Early 2013) with Mavericks display HIDPI on external monitor?
you cant return it unless you have had it for 14 days or less, but you can bring it to an Apple store or AASP for warranty service.
-
I recently upgraded my Mackbook Pro ma operating system from OSX lion to Maverick, but in the process I can not access my iphoto 9.1.5. How do I access it?
Download the Mavericks version from the App Store.
The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform. -
When I buy a new MacBook in December, will it have osx mavericks or mountain lion?
If it has mountain lion do I have to buy it from App Store instead?
It depends on when the MacBook is manufactured. If the MacBook is manufactured before the OS X Mavericks release, it comes with OS X Mountain Lion, and if it's manufactured after the release, it comes with OS X Mavericks. Note that if you buy the Mac at an Apple Store or Apple Online Store, it will always come with OS X Mavericks if you buy it the Mavericks release date or after, as Apple upgrades all Macs. This doesn't apply to Macs sold in other shops.
If your Mac doesn't come with OS X Mavericks, it's possible that Apple launches an upgrade program that allows you to upgrade to OS X Mavericks free of charge, as Apple did with OS X Mountain Lion and Lion, but it hasn't been announced for Mavericks. If not, you will have to pay for OS X Mavericks in the Mac App Store -
My MacBook purchased in May 2009 has OSX version 10.5.8 What version should I purchase to upgrade?
My MacBook purchased in May 2009 has OSX version 10.5.8 What version should I purchase to upgrade?
Start with Snow Leopard:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
I have Mac OS X 10.6.8 on macbook. can and should I upgrade to mavericks 10.9.2
I have Mac OS X 10.6.8 on macbook. can and should I upgrade to mavericks 10.9.2
Can you:
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
Should you upgrade is your decision. If you don't need the advanced features of Mavericks, then there is no reason to upgrade. If you don't use applications that require Mavericks to upgrade, then you don't need to upgrade.
Note that beyond Snow Leopard you won't be able to run PPC-only applications such as Office 2004.
Maybe you are looking for
-
Item cost not found for one or more items - Inventory Posting
Good Day Mentors, My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items". The specific Message ID from SAP's System Message Log is 10001287. I found a similar post which addresses this error here
-
Invalid file - SQL Developer 1.2 for Windows download
I attempted to download the latest verion(1.2) for Windows with JDK and failed. Download process completes downloading the file, but it then complains that its not a valid ZIP file! cheers. Manod
-
Convert Adobe Illustrator CS6 Win license into Mac license
Dear All, some time ago I've purchased Adobe Illustrator CS5 as well as CS6 upgrade Win. Now I converted from Windows 7 to Mac OS X Maverics. On the page "My Products and Services" along with the serial numbers the Adobe Illustrator CS5 and CS6 Upgra
-
Hello Everyone, Client of mine is using RRAS for VPN access to the network. Everything works as it should, I can change the LAN setting to work as dynamic or static with a range of IP's. Problem When the server gets rebooted with the weekly Windows u
-
PhotomergeUI.plugin won't load
Hi, y'all! I tried installing the PhotomergeUI from photoshop extra plugin, but it won't load. When I reloaded photoshop, it's missing under the files>automate menu. I put it under //applications/adobe photoshop cs4/plug-ins/automate/ I think I've ov