OSX Mountain Lion and IPSec Rules
Hi there,
I am currently have a Cisco 881 router running EasyVPN server.
I recently created come IPSec rules that allow trafiic to specific IP's for a specific security group:
access-list 105 permit ip host 10.1.0.5 any
access-list 105 permit ip host 10.1.0.15 any
access-list 105 permit ip host 10.1.0.16 any
access-list 105 permit ip host 10.1.0.32 any
This works as expected with our Windows users, however our Mac users (using native VPN Client) can only reach the FIRST ip in the string of access statements. When I was torubleshooting this, I moved .32 as the first statement and I could only reach it and none of the others.
All of the routes look right locally:
netstat -r:
default 192.168.1.1 UGSc 148 0 en0
default utun0 UCSI 1 0 utun0
10.1.0.5/32 10.3.0.133 UGSc 1 11 utun0
10.1.0.15/32 10.3.0.133 UGSc 1 2 utun0
10.1.0.16/32 10.3.0.133 UGSc 0 0 utun0
10.1.0.32/32 10.3.0.133 UGSc 1 0 utun0
10.1.0.50/32 10.3.0.133 UGSc 0 0 utun0
10.1.0.51/32 10.3.0.133 UGSc 0 0 utun0
10.1.0.60/32 10.3.0.133 UGSc 0 0 utun0
10.3.0.133 10.3.0.133 UH 10 0 utun0
10.3.0.255 utun0 UHW3Ii 0 6 utun0 2279
route get 10.1.0.5:
route to: 10.1.0.5
destination: 10.1.0.5
gateway: 10.3.0.133
interface: utun0
flags: <UP,GATEWAY,HOST,DONE,WASCLONED,IFSCOPE,IFREF>
recvpipe sendpipe ssthresh rtt,msec rttvar hopcount mtu expire
0 0 0 0 0 0 1280 0
route get 10.1.0.15:
route to: 10.1.0.15
destination: 10.1.0.15
gateway: 10.3.0.133
interface: utun0
flags: <UP,GATEWAY,HOST,DONE,WASCLONED,IFSCOPE,IFREF>
recvpipe sendpipe ssthresh rtt,msec rttvar hopcount mtu expire
0 0 0 0 0 0 1280 0
ping 10.1.0.5:
PING 10.1.0.5 (10.1.0.5): 56 data bytes
64 bytes from 10.1.0.5: icmp_seq=0 ttl=61 time=66.426 ms
ping 10.1.0.15:
PING 10.1.0.15 (10.1.0.15): 56 data bytes
Request timeout for icmp_seq 0
And yes, host 10.1.0.15 is up.
Any help on this would be greatly appreciated!
Thanks!
by using native vpn client on mac users to access the host ip's which is configured access-list on your vpn server, means you're using split tunneling. My suggestion is try to hardcode a static route on the hosts you want to access via mac users using vpn client.maybe it will work. o_0
Posted by WebUser Antonio Isip Jr from Cisco Support Community App
Similar Messages
-
Unable to download OSX Mountain Lion, and iTunes 11 update not working.
Hi there,
I paid for OSX Mountain Lion and was ubale to download, keeps given error or something similar. Now I can't seem to update iTunes. Please advice.What is the error code/message?
Try resetting the App Store.
Reset Learned from Old Toad
There is a contact link.
Support -
OSX Mountain Lion and Excel Scrolling
I just installed OSX Mountain Lion and now when I open a either a new or existing Excel spreadsheet the screen continuously scrolls to the right. Anyone know how to resolve this. I've restarted the machine several times and it still does it.
I see the spiraling nebula, Lion, elephant, grass, etc. pictures here in ML 10.8.2. If you have a folder of pictures, that contains one or more additional picture folders, ML will only image the top folder with screen saver. The types of slideshows have changed too.
Suggest you find someone running ML and take a look. -
I trying to downlaod the OSX mountain Lion http//apple.com/osx/update and I fill out the form and input Serial No# of my iMac and then they ask for copy of purchase reciepe How do you do that if no scanner ??????
If you have a problem and need to reinstall, you don't have to pay.
OS X Recovery restores your Mac with a few clicks.
OS X: About OS X Recovery -
I cannot open any pdf files on my mac book air. I used to be able to open them. It was suggested that I get OS Mountain Lion and I did. still can't. Any ideas?
You can download Adobe Reader from adobe.com. The Mac OSX uses its "reader" to open PDF files without the Adobe Reader. If you downloader adobe reader, it should open all PDF files. Hope this helps.
-
I download OSX mountain Lion and my mac is very slow.Any idea why?
After downloading mountain lion my mac gets slow...any idea why?
Try this:
Boot into Safe Mode then reboot normally. Do the following:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Does this help? If not, then you should reinstall Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I tried to download the latest OSX for my iMac - Mountain Lion.
This is the message that I received:
"We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed."
What does this mean?The only thing that worked for me was to boot in safe mode.
Power down. Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore.
No trouble at all once I did this.
Reminder: create full backup before you upgrade OS
Hope it helps. -
OSX mountain lion and screen savers
I currently have OSX lion, and was wondering if I will lose all my pre-downloaded desktop screen pictures (the galaxy, elephant, grass...etc) from Lion if I upgrade to mountain Lion.
I see the spiraling nebula, Lion, elephant, grass, etc. pictures here in ML 10.8.2. If you have a folder of pictures, that contains one or more additional picture folders, ML will only image the top folder with screen saver. The types of slideshows have changed too.
Suggest you find someone running ML and take a look. -
Reinstalling OSX Mountain Lion, and it says 500 hours to dowload?!? hellp
I have a MacBook Air and was suggested to delete everything on my HD before potentiallly selling my MacBook. So I followed all the instructions, disk utility, erase hard drive, go back and reinstall Mountain Lion. Anyways everything is going smoothly, but my installation time says up to 500 hours for it yo download !!! Is that crazy? Some malfunction? Or just my internet connection???
Please helpIt could be a server-side slowdown of sorts, but likely is because of your connection. Are you in a relatively remote area? Most broadband connections should take a few hours or less to download the installers, which are around 4GB in size.
-
i have a macbook air with os X, i buy an upgrade of OS X MOUNTAIN LION, but this still appear in my
updates list, the question is if this is working or not.....Since you're having issues in multiple accounts I suggest you repair the HD and re-install the OS. ML makes the process pretty painless.
Boot up holding command-r keys into your Recovery Volume.
The screen should give you these choices...
Restore from TM backup
Reinstall Mac OS X
Get help online
Disk Utility
First choose DIsk Utility and run Repair Disk. If you find errors run it until all errors are fixed or it reports "Disk cannot be repaired".
Then, choose Reinstall OS X. This will be an install in place and won't affect any of your own data. -
Anyone knows how to stop this update? Or how to continue the update so that my Macbook can be shut down or restarted...
Since you updated the operating system, it is probably Minecraft is missing certain files that ware remove or are not longer comparable with the new version of the OSX. what I recommend, is to check is there is an update for Minecraft and install that. If there is not update available, probably the best thing will be reinstalling Minecraft. Hope this will help you.
-
I am installing Windows 7 and I get an error message: "Your disk could not be partitioned. An error ocurred while partitioning the disk". I was using a Windows & Home Premium OEM Software that I purchased from Microsoft. I was given to Windows 100GB to use for Quickbooks pro, Payroll and Publisher. I have the Macbook Pro model No: MD102LL/A. Does anyone knows what happenned or can advice me in what to do? Please help!!!
amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive -
OSX Mountain Lion and Vienna Ensemble Pro 5
I'm about to assume that I've made a mistake, but I don't like assuming ...maybe someone can help me figure this out.
THANKS in advance:
I just completed the download of Vienna Ensemble Pro 5 w/ a 9Gb Demo Library
The stand-alone app, and probable the VST, won't find / load / activate any of the samples that came with software purchase.
I can load Kontakt 5 in this app, load a single instrument and hear playback (via MIDI controller) when I try.
The problem I am having with the VE Pro 5 Included Library instruments is that I can not locate, so I can not load any, thru the interface.
I download the samples and they uncompressed into multiple ".dat" files. (?)
That is where I am afraid to assume ...I'm just learning about using these (awesome) Vienna Apps, but I've yet to see a
instruments library load as a Dat file.
Could they be in the wrong folder?
Should I uncompress it some other way?
It there ONE BUTTON I should have hit, to fix all of this?
I have ".gig", ".wav", ".au" and ".nki" files, is the ".dat" file something new (to me) that I need to learn about?
I love Vienna everything, but I am clueless (new guy) and would definitely appreciate any help you can offer!
All I'd like to do, is hear a few sounds triggered by my MIDI Contrlr. But I suck at figuring stuff these days
Thanks again
RiahFinally actually figured it out. It was all there somewhere but for anyone else who might want the details here they are:
1) Start Vienna Ensemble Pro 5 SERVER
2) Start Logic X
3) Create a software instrument
4) Choose “AU Instruments – VSL – Vienna Ensemble Pro - Stereo”
5) Press “Connect”
6) Choose the “Available Instance” and press “Connect” (This step is necessary to connect Logic with VEP5)
7) On an audio track insert an “Audio FX” and choose “Audio Units – VSL – Vienna Ensemble Pro Audio Input – Mono (or Mono-Stereo)
8) Press “Assign” choose the “Connected Server Intervace” and again press “Assign”
9) Be sure that the “Audio Input” on this screen is set to “In 1/In 2” or whatever the corresponding output in Logic is set to
10) Press “Raise”
11) Press the “Microphone” icon to insert an audio input
12) Go to that input and set the “Input” to “IN 1 / IN 2” or the proper input that corresponds to Logic
13) On the same channel strip go up to “EFFECTS” and press the “+” button to add the effect you want -
can anyone tell me why I can no longer see the scroll bar to the right of the screen unless I stretch the screen but it fades in and out instead of always being there to scroll down
Open General preferences. Select the desired scrollbar behavior/appearance:
-
I got the notification that i needed to update the software and when i did and it finished, the app store stopped opening. it keeps sending me an error message. does anyone know what to do? thanks
MacBook Pro (Mid/Late 2007 or newer) is required. You've not indicated which one you have. If yours is one of these, then http://www.apple.com/support/mac/app-store/contact/
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2
Maybe you are looking for
-
Inspection lot of type 04 in "assignment" tab in Process order
Hai, How do I make the Inspection Lot that was generated based on 04 Inspection Type in the Process Order - "Assignment" tab? Thanks in advance, Sonali
-
Data Recovery from Late 2008 Macbook Hard drive?
I have a late 2008 Macbook. It was recently dropped by a child, resulting in it no longer turning on. (It worked one time when tried within about 12 hours after the fact and then wouldn't get past the Apple logo and spinning wheel on startup). I brou
-
IPhoto 11: No book or postcard order possible?!
Hi, as the title suggests, I have a problem with iPhoto 11. I can't order neither books or postcards or prints. Since I can't find anything about this in the web, I assume that there is a single problem and it's somehow related to me / my computer. I
-
Detecting unassigned variables in TestStand?
Is there a method to detect unassigned/unused variables in TestStand as exists in the Visual Studio C# environment? If not, I would request that a method be made available eventually. They can accumulate and are difficult to clean up manually.
-
How to assigne Java thread to a specific cpu core
Hello everyone, I want to ask a complicated question. How can I assign Java threads to specific core in a multi-threaded application. The underlyinsg OS can be Linux or Windows. Is there any option provided in JVM can do it? If I want to fork a proce