OSX server 3.0.3 wiki issues using the iPad

Hello,
I just got the new OSX server 3.0.3 Maverics installed and everything seems to work fine except for going to the Wiki using an iPad. The Mac and the iPhone work fine but when you try and go to the wiki using the iPad it try's to redirect to https://domainname/wiki/ipad/#route=/wiki/ipad/ but it won't work. I just get a blank page on the iPad.
Any idea how to fix this. It's driving me crazy.
Thank you.

There are add-on packages for Windows that can access CardDAV (addresses) and CalDAV (calendar) services.
See this list and this list for some of the available options.
Windows Server with Exchange Server and Microsoft Office clients might be a better choice, if you're working with a whole lot of Windows clients. Microsoft Office is also available for OS X, as well.

Similar Messages

Powerview Cannot connect to the server due to a security issue. The server may not have been able to match the host for silverlight

Hello,
I have a sharepoint 2010 sp1 CU Dec 2011 server with a SQL Server 2012 SP1 CU4 reporting services instance. I am able to open Power View and use it normally when bypassing the ISA Reverse Proxy server. However when going thru ISA I receive the
following Error.
Power View Cannot connect to the server due to a security issue. The server may not have been able to match the host for Silverlight. This error appears after I click yes on an Internet Explorer Display Mixed Mode prompt.
I've seen a couple references to this issue but not much. This one mentions a clientaccesspolicy.xml file but I haven't had any luck with that. http://connect.microsoft.com/SQLServer/feedback/details/716433/cannot-connect-to-the-server-due-to-a-security-issue-the-server-may-not-have-been-able-to-match-the-host-for-silverlight
Any Ideas? Thanks.
Ryan

Hi Ryan,
Based on my research, the issue should occur due to a by design behavior in Threat Management Gateway (TMG). To work around this issue, you can use SSL between the TMG and the SharePoint Web Server.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line

Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line:
http://technet.microsoft.com/en-us/library/cc731873%28v=ws.10%29.aspx
dcpromo /unattend /InstallDns:yes /ParentDomainDNSName:mysite.com /replicaOrNewDomain:domain /newDomain:child /newDomainDnsName:gridview.mysite.com /childName:gridview /DomainNetbiosName:gridview
/databasePath:"c:\Windows\ntds" /logPath:"c:\Windows\ntds" /sysvolpath:"c:\Windows\SYSVOL" /safeModeAdminPassword:pass1 /forestLevel:4 /domainLevel:4 /rebootOnCompletion:yes
Error Code:
The specific argument 'childName' is not recognized.
I am trying to insert gridview as a childname.

Hi,
Before going further, can we try another domain name to see what will happen?
Besides, if the issue persists, we can try installing a new child domain by using the GUI.
Installing a New Child Domain by Using the Graphical User Interface (GUI)
http://technet.microsoft.com/en-us/library/cc771856(v=ws.10).aspx
Best regards,
Frank Shen

An issue using the COM components supplied with SAP GUI 6.2 or 6.4

We are having an issue using the COM components supplied with SAP GUI 6.2 or 6.4. We used to have SAP 4.6c and now we have 5.0. When we were on 4.6c, we used these COM components to logon and execute RFC calls and we had much success. Now that we are on 5.0, we cant seem to instance any SAP functions that have something to do with SAP Workflow. We have experienced this problem when using VB6 or .NET, but our existing code that always worked is in VB 6.0.
SAP Components used:
o     SAP Logon Control
o     SAP Function Control
o     Librfc32.dll
o     Other supporting C DLLs and/or COM object supplied with the SAP GUI installation.
For example, if we want to call the RFC ARCHIV_CONNECTION_INSERT, this code fails in VB6 when the Set objworkflow = objFuncCtrl.Add(strFunction) line of code executes. Instead of returning an instance of the object ARCHIV_CONNECTION_INSERT function, no object is created. In 6.2, SAP raises no errors, but the object we are trying to create is still Nothing. If we use 6.4, SAP raises an error SAP data type not supported via a message box and then the object is still = Nothing. Interestingly enough, the 6.2 GUI COM controls dont display the error dialog. The message box that is shown comes from the SAP Function COM Object "SAP.Functions" (wdtfuncs.ocx).
Now, what is interesting is if we use the same code to call a standard function or custom function that doesnt have anything to do with SAP Workflow, then the code works fine. Again, all of our code used to work just fine on an SAP 4.6 system.
Here is the code that fails:
    'SAP Logon control - object for creating connections to an SAP system
    Dim objSAPLogonCtrl As Object
    'SAP connection object
    Dim objConnection As Object
    'Object that will represent the SAP function called
    Dim objSAP As Object
    'SAP function control object - object factory for creating other SAP function objects
    Dim objFuncCtrl As Object
    'Create instance of an SAP logon conrol
    Set objSAPLogonCtrl = CreateObject("SAP.Logoncontrol.1")
    'Create a connection object
    Set objConnection = objSAPLogonCtrl.NewConnection
    'Define connecion parameters
    objConnection.ApplicationServer = "sapvm"
    objConnection.SystemNumber = "00"
    objConnection.Client = "800"
    objConnection.User = "iissap"
    objConnection.Password = "tstadm"
    objConnection.Language = "E"
    objConnection.TraceLevel = 10
    'call the logon method of the connection object
    If objConnection.Logon(0, True) = False Then
        MsgBox Error
        Exit Sub
    End If
    'Create an instance of the SAP Function control object
    Set objFuncCtrl = CreateObject("SAP.Functions")
    'Set the function control connection object
    Set objFuncCtrl.Connection = objConnection
    'Function name to be generated and called
    Dim strFunction As String
    strFunction = <b>"ARCHIV_PROCESS_RFCINPUT"</b>
    'Create an instance of the function defined in strFunction
    Set objworkflow = objFuncCtrl.Add(strFunction)
    If objworkflow Is Nothing Then
        MsgBox "Could not create object " & strFunction
    Else
        MsgBox strFunction & " object created."
    End If
If anyone has seen anything like this or has any ideas, please help!
Mike and Hameed
<b></b>

Hi,
documentation on the Scripting API is available at ftp://ftp.sap.com/pub/sapgui/win/640/scripting/docs/
This API is a replacement of the existing, obsolete COM interfaces.
Best regards,
Christian

I have a powerbook running on osx 10.5.8. can i use the icloud

i have a powerbook running on osx 10.5.8. can i use the icloud?

Hello, sealaw.
Thank you for visiting Apple Support Communities.
Here are the system requirements for using iCloud.
System requirements for iCloud
http://support.apple.com/kb/ht4759
Cheers,
Jason H.

HT3775 I'm using version 10.7.5 OSX. I can't play or use the normal AVI recently. Some problem with (codecs version incompatible with OSX) Please give me some help. I'm in Vietnam and to have a real place to have stuffs from Apple is ****-

I'm using version 10.7.5 OSX. I can't play or use the normal AVI recently. Some problem with (codecs version incompatible with OSX) Please give me some help. I'm in Vietnam and to have a real place to have stuffs from Apple is ****…

I would recommend that you download and install the excellent and Free "VLCPlayer for Mac", which reads many more types of files for video than Quicktime Player:
http://vlc-media-player.en.softonic.com/mac

Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source? Now that I'm on iOS 7, I either charge or use... Not both.

Is anyone else having an issue with the iPad not charging if you use it while it's plugged into a power source? Now that I'm on iOS 7, I either charge or use... Not both.

No problems here.
Edit...
My IOS-7 is on an iPod Touch.

HT1766 After IOS 7.0.4 Updation My ipad 4 started to turn off frequently and i cannot use the ipad morethan 5 minutes, how to resolve this issue.

After IOS 7.0.4 Updation My ipad 4 started to turn off frequently and i cannot use the ipad morethan 5 minutes, how to resolve this issue.

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

After downloading OSX 10.8.5 I can´t use the camera with Skype.

After installing OSX 10.8.5 I can´t use the camera with Skype. Incoming video works just fine. Problem is my camera doesn´t turn on automaticly and all camera text in Skype menus are greyed out. Camera still works with facetime and photoboth and so on, so no problem with the actual camera.
Please help, Im in Kabul Afghanistan, I have my support in Sweden!
Best regards

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.

I want to use multiple iPads as external monitors from a PC using the iPad VGA adapter (wired)

I want to send a VGA signal to a couple of iPads using them as monitors. I currently use a pair of regular 13" VGA 1024x768 lcd monitors looping thru an LCD projector displaying the same signal sent to the projector.
I want to use the iPad VGA adapter and WIRE them in just like a convention LCD monitor. Yes there are apps like air display and others but they don't allow cloning and have latency issues and must be networked. I need an app to use the VGA adapter and actually wire them in using a VGA signal from my existing VGA distrubution amp.
The size of the iPad is perfect for my application however I cannot find an app to let me send a signal into the iPad via VGA adapter.
Any ideas?
thanks,
the Sherm

http://www.shapeservices.com/en/products/details.php?product=idisplay&platform=i phone
Cool ... takes on all of the complex-ip-aliasing to turn the Mac into the center wi-fi a screen share netork

I can't read Or write I have been using the iPad With the accessibility icon Is there a video help them teach me how to use it more efficiently

I cannot read or write I have been using the iPad With the accessibility icon Is there a video to help teach me To learn how to use this accessibility more efficiently

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Using the iPad as a signature pad

We would like to use an iPad as a signature pad for a document on as desktop computer. I've researched several apps but they all seem to want the document on the iPad but we will need to have the document on the desktop computer. We would like to be able to connect the iPad through its cable and use the iPad as a signature pad for the document(s) that require a signature.
These are work computer computers running Windows 7 and Windows 8.
Thanks in advance for any help you can provide.
V/R
George King

Could you put the document on an internal web site?
Set up a web server on the pc.
Web solutions.
http://en.signotec.com/portal/meldungen/use-your-iphone-ipad-or-android-tablet-a s-a-signature-pad-now--900000275-10002.h…
http://stackoverflow.com/questions/3096470/capture-signature-using-html5-and-ipa d
You could crank up a screen sharing app on the pc which the ipad could access. Use can then sign document.
I'm drawing a blank. What were the names of those tablets you could use to draw on as input devices to computers? Could look for such an app in the app store.
Robert

I have wifi in my home and it has always worked fine. Then I went to Ireland and used the iPad there. Since I have been home, it won't work in the house. I took it to another location where I have logged in before and it worked perfectly. Any ideas?

I have wi-fi in my home and it has always worked fine with my iPad. Then I went to Ireland and used the iPad there. Since I have been home, it won't work in my house. I can't get my wi-fi connecton. I took it to anothe location where I have logged in in the past, and it worked perfectly. Any ideas as to why I can't get a connection at home?
Thank you.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My ISP requires a http login. I can use the iPad fine if I am logged in on a PC connected to the same wifi network, but if I login on safari on my ipad, the connection drops after some time.. any workaround?

My ISP requires a http login. I can use the iPad fine if I am logged in on a PC connected to the same wifi network, but if I login on safari on my ipad, the connection drops after some time.. any workaround?

TJBUSMC1973 wrote:
The iPhone is working, as designed and advertised. In this case, the user failed to educate themselves properly, either by proper research or asking the right questions, before purchasing the device.
I understand that the OP failed to do research. But then, I wasn't replying to the OP. I was replying to Chris. I have Verizon. I can talk and use data at the same time with my Droid Maxx. Therefore, the problem is not just with the network. It would be technically possible for an iPhone to do that on Verizon/Sprint if Apple had chosen to use a different chip, such as the kind other phone manufacturers have elected to use.
Of course, this is probably all irrelevant to the OP's issue. It was merely a point of clarification, especially for those people who are used to being able to use both voice and data at the same time on Verizon. When they switch to an iPhone, they are often surprized at the limitation.
Best of luck.

Hello everyone ! As any developer I got the iOS 7 beta on my iPad mini , before few days when I used my iPad it says that it's not activated, and I can't activate it using the iPad , When I plug it on my win so I can restore it using iTunes , I got to er

Hello everyone !
As any developer I got the iOS 7 beta on my iPad mini , before few days when I used my iPad forgot my passwaor, and I can't unlock it using the iPad , When I plug it on my window so I can restore it using iTunes , I got to errors , once "Unkown error 3004" and once "It's not eligble".
I hope you can help me.
Thanks,

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

OSX server 3.0.3 wiki issues using the iPad

Similar Messages

Maybe you are looking for