OSX Server problem after upgrade to 3.01

Everything goes well when I upgraded to OSX 10.9 and installed Server 3.0 on Mac mini 2011 last month. When I upgraded to server 3.01 from app store, it is stuck at "Setting the Server on this Mac." The progress bar on the screen stop at "Preparing for the Services" forever. Any hints about how to solve this problem?

After I followed this Apple procedure to perform the Server.app reset, it works well. However, it stucks again after it was upgraded to 3.02 via the Mac App Store. Finally, the latest version 3.1 comes out recently. Should I always follow the below procedures when I upgrade to the latest verson? How to backup the configuration files if any.
To install the final release of OS X Server (Mavericks) on a Mac that has a pre-release version of OS X Server installed:
Move these to the trash:
The pre-release version of Server app.
/Library/Preferences/com.apple.serverd.plist
/Library/Preferences/com.apple.servermgrd.plist
The folder /Library/Server
Install OS X Server (Mavericks) via the Mac App Store.

Similar Messages

Application server problem after upgrade from 4.6C to ECC 6.0

Hi all,
We have recently upgraded our test server form 4.6C to ECC 6.0.
In one of the programs we are using open dataset to write files to
application server. This particular folder had been mapped through "Map Network
Drive function" in windows. The path we have given in the program
as "<Drive>:\<Folder>\File Name".
Code :
DATA : zdsnb(45).
ZDSNB = 'R:\SAPPayroll\zpaysheet.prn'
OPEN DATASET zdsnb IN TEXT MODE.
In 4.6C this particular format was reading without any problem. But
after the upgrade, system is throwing an error "File cannot be read".
We have checked the NTFS share rights and rights for the mapped drive.
It's "Everyone" full access.
Our OS: Windows 2003 server 64 bit
Database : MS SQL 2005 64 bit.
Most of HR related testing is based on this access. Pl suggest a
solution, so that we can go ahead with our testing and upgrade of other
servers.
Regards,
Adeeb

Am a little confused by which way your slashes are going, but if they're Ok try adding phrases below.
open dataset p_uxfile for input in text mode encoding default.
Best!
Jim

Layouts problem after upgrade

Hello, I have a problem after upgrade from 2007 to 8.81 PL 05.
Since we upgrade SAP, the layout changed.
For example, in a credit note if it has 3 lines, in the layout will appear 2 lines in a page and 1 in other page.
if the credit note has 4 lines, in the layout will appear 3 lines in a page and 1 in other page.
What could it be?
Thanks in advance.

Hi!
lines are not duplicated, they just printed on different pages:
- if doc has just 2 lines - printed form is good
- if doc has 3 items, two of them are printed on the first page, 3d - on the second page
- if doc has 4 items, 3 of them are printed on the first page, 4th - on the second page
When we are printing directly from the server everything is working fine. But printing from all Clients gives us this issue that is described above.
SAP re-installation for all users will take too much time. May be exist any other option that we can try?
we really appreciate your help
Natalia

I have problems after upgrade my firefox

I have problems after upgrade my firefox
(Suspected spam link removed by Moderator. Please read the [[Forum rules and guidelines]] -m)

Hey there Noel,
It sounds like you are unable to activate your iPhone after you reset it. I recommend the steps from the following article to help you get that resolved:
Get help activating your iPhone
If your carrier provided a SIM card, make sure it's in your iPhone.
Restart the iPhone.
Try to reach the activation server another way, then try to activate.
Try connecting to a known-good Wi-Fi network if you can't activate using a cellular data connection.
Try connecting to iTunes if you can't activate using Wi-Fi.
Restore the iPhone.
Check the system status for iOS Device Activation. If the iOS Device Activation status isn't green, try activating your iPhone later.
If you receive an alert message when you try to activate your iPhone, place the iPhone in recovery mode and perform a restore. If you still can't complete the setup assistant due to an activation error, contact Apple for assistance.
Thank you for using Apple Support Communities.
All the best,
Sterling

Problems after upgrade bios to v4.3 - P67A-GD65

Hi to everybody,
I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
Also there was information about what is new in this version of bios fw as:
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
so may be there have benn occured a problem that mb can not save edited settings correctly?
3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
Thanks for your replies from now on.
Greetings.

Quote from: momosala on 02-April-13, 17:54:22
I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
Flash using method 1.
And tell us if that works.
thank you for reply that fast i will try asap and tell here.
Btw, have you ever face a problem as i wrote above?

Problems after upgrade: Leopard to Leopard no longer works

My sister upgraded to Leopard on her iMac(c2d) to Leopard yesterday. Earlier in the day we were able to do video chats with a number of people(her machine Tiger to Fathers machine Leopard). However, since upgrading, we've experienced weird behavior for video chats. Basically in her window she won't see her image(the small one), and I don't see her at all. We've tested this out with a number of other iChat accounts and get the same results. Btw, all machines that are chatting with her are using Leopard. Also, all other forms/capabilities work: screen sharing, sharing of pictures, audio chats.
Anyone out there have similar problems after upgrading from Tiger to Leopard? I have done the usual adjustments of bandwidth and QT settings, as well as restarts. What else should I try?
tia,
n

I finally resolved this problem: I think the issues/steps would be helpful for anyone who experiences iSight off or not working problems after upgrading to Leopard(then to 10.5.1) on a intel 20" iMac :
Problem:
-If you have an internal iSight on an iMac and your camera works fine in Tiger
-If you upgrade to Leopard
-If Chat camera doesn't show your image (iSight off) even though the green light is on
-You can see the other persons video on iChat
-Your friends can here you and you can share screens, files, etc.....everything but have them see you
These are the initial steps I took:
- Deleted the pLists(or stored preferences for the Application) described at the top of this thread
- Was told it might be slow internet connection so did various things: disconnected other computers, changed wireless to "G" only
- Specifically Opened of ports spec'd for Leopard on router (even though I hadn't needed to do this under Tiger)
- Tried chats with various people on various fast/slow networks
- Restarted all aspects of the network: router, wireless access point, computer
- Checked to see if the iSight was shown in 'System Profiler'. It was found in 'About This Mac->More Info->System Profiler->USB'
- Clicked Video icon in iChat Buddies window(to the right of your name) and coudn't see my image
- Opened 'PhotoBooth' and coudn't see my image(black screen)
- Opened iMovie and couldn't capture video via the iSight(black screen)
- Opened iChat->Preferences->Video and couldn't see my image
- Validated that 'Camera is Enabled' in iChat->Video->Camera is Enabled
If you are experiencing a similar problem with you built-in iSight, I would probably focus on the last 5 things that I did. What they showed me was that the iSight was just not capturing video even though it was capturing sound in 3 different applications.
The solution to iSight Off or iSight Not Responding or No Video is......reset your computer! I had thought my sister performed this but it turns out she hadn't. Here's the link to this procedure:
http://docs.info.apple.com/article.html?artnum=303446
Very easy to do though: Power off computer and unplug all cables, including power cable for at least 15 seconds. Plug everything back in and power up the computer and retry clicking on the 'Video' icon next to your login name. If you see yourself then...problem is solved.
While I eventually found posts in several other forums, it took me the better part of a week. To try this simple step. I wish I had done so straight away. Oy. I guess I learned a lot about ports, speed etc.
I hope this helps.

Problems after upgrading to iTunes version 6

Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!

Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP

Permission problems after upgrade to 10.5 on early Power PC G5 Tower

Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
The Xserve runs 10.3.9, any help would be greatly appreciated.
We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan

Re: (forte-users) Unstable server ENV after upgrade to Forte30M2.

I see/suggest a few things:
1) In your #1, you mention ".... development and test environments which use the
same Forte 3M installs through links ...". This concerns me. On our UNIX box
each environment has it's own directory containing it's own install. If your
environments are some how sharing a node manager, log directory or processes (to
name a few things) that is a recipe for disaster. They may be competing for
resources and usually the first one started will win.
2) I haven't done a lot with compatibility levels, but if an application built
in dev is to run in test it may be important that node managers and services
(autocompile, codegen etc.) be at the same level (????).
3) Check the definition files, to make sure the two environments operate
independently. If they are both trying to write to the same log file the one
started up first will work while the second will not as the file will be "busy".
4) We usually use rpcreate (newer version) to create brand new repositories.
Than we export/import the source code that we need. Also it is important to
force compile ALL plans in a workspace at least once after doing the import.
This will ensure that all of the code is "speaking the same language". The other
compile, only compiles those pieces of code that changed from the last compile.
Hope this helps.
Kelsey PetrychynSaskTel Technical Analyst
ITM - Technology Solutions - Distributed Computing
Tel (306) 777 - 4906, Fax (306) 359 - 0857
Internet:kelsey.petrychynSasktel.sk.ca
Quality is not job 1. It is the only job!
"Braja Chattaraj" <forte_brajachotmail.com> on 09/13/2000 03:43:57 PM
Please respond to chattaraj_braja_NONLILLYlilly.com
To: forte-userslists.xpedior.com
cc: (bcc: Kelsey Petrychyn/SaskTel/CA)
Subject: (forte-users) Unstable server ENV after upgrade to Forte 30M2.
We are running Forte 3M2 clients and server in our test environment with
clients on NT and server on Solaris 2.6. Eversince the upgrade from 3L to 3M
we have been having an unstable environment that does not remain alive for >
10 mins. These are the details of the Forte installs and server setups :
1. The server hosts the development and test environments which use the same
Forte 3M installs through links (same ftcmd, ftexec, nodemgr, etc.). The
environments are at compatibility levels 0 and 1 respectively.
2. The two environments have the same definition files (defining the ENV
variables), though seperate copies and the two environments are hosted on
different ports on the same server.
3. While building the new 3M environmnets in DEV and TST, we exported the
old 3L repositories and imported them into the new 3M repositories and
deployed the applications.
While the DEV environment is stable the TST environment is not. This has
been observed while moving plans between the environments (export and
import) using fscript commands, deploying the apps after the move using
fscript, and testing the apps. Sometimes it has come down right after a
startup. There is no programatic reference to the environment agent in the
code. So, a programatic shutdown is ruled out.
Does anybody have a clue or a similar experience ?
Thanks.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
BRAJA KISHORE CHATTARAJ
Consultant, Analysts International.
Work : Sphinx Pharmaceuticals (A division of Eli Lilly & Co.)
(919) 314-4134
Home : 1801, Williamsburg Rd., #41H, Durham, NC 27707.
(919) 463-7802
E-mail : forte_brajachotmail.com
Visit us www.analysts.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://profiles.msn.com.
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

We found a solution to our issue.Their desktops were in a lockdown environment and the essbase.id file located in the windows directory was locked as well. This file is responsible for assigning ports etc and it couldn't be updated for the 6.5.4p2 upgrade. Once the file was deleted and the user reconnected to Essbase, the essbase.id was reset and they could connect.

Problem after upgrading to ICS 4.0.4

i have different problem after upgrading my SE Live with Walkman to ICS 4.0. After upgrading, my sd card always full. I have try to remove some files but after that it full again. Finaly i found that there are tumbnail file with size precisely same with my empty space. I delete that file, but the empty space not recover, its only recover after unmounting sd card. But its not hold for long time, after one minutes its happen again, my sd card is back fully again, and the same file is back to exist. Please help me, is that a virus or bugs from ICS?? i very frustation with this case
thanx for your help

Do you have many pictures?
Have your tried to reinstall the phone software using SUS to check if the problem remains?
http://www.sonymobile.com/gb/tools/update-service/
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Several problems after upgrading to iO6

My iphone is with multiple problems after upgrading to iOS 6. Applications are closing alone, the screen goes black and then back to the home screen. does not connect to internet (3G and Wi-Fi) connections as cutting. Throw another quick update to fix this, or do I have to change to the Galaxy SIII; Iphone is Terrible!!

Try the Padma extension.
*Padma: https://addons.mozilla.org/firefox/addon/padma/

Login problem after upgrade to mavericks

Hi, i have login problem after upgrade from mountain lion to movericks in imac, I did enter the correct password But back to the login page again.

Hi cpuman8,
Thanks for visiting Apple Support Communities.
If you're not able to log in to your user account after upgrading, try resetting your password using the method in this article:
Resetting the original administrator account password
In OS X Lion or later, you can reset your user password with your Apple ID.
OS X: Changing or resetting an account password
http://support.apple.com/kb/ht1274
Best Regards,
Jeremy

Apple TV problem after upgrading to iTunes 7.5

PROBLEM: After upgrading to 7.5, Apple TV no longer recognized iTunes and vice versa.
ATTEMPTED SOLUTIONS: Removed and reinstalled iTunes 7.5 from scratch. Reset @TV to Factory Defaults and reconfigured. Removed Apple TV from iTunes Preferences/Apple TV/Remove Apple TV.
iTunes no longer finds @TV, either in the Preferences/Apple TV pane, or in the Device List. Everything worked perfectly before the 7.5 upgrade. All other features and devices working fine. Have reviewed all postings and eliminated the possibility of firewall or port problems.
Suggestions welcome! Thanks.

I have partially resolved the problem. Something with the 7.5 upgrade changed the network protocols being used by the Apple TV... switching to a wired network from end to end with a full shut down and reboot has the @TV back online... I am still working on trying to solve the wireless side of the equation.

Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgra

I'm using iPhone 5
Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgrading to ios7. I now hate apple and I'm thing of getting samsung.

Basic troubleshooting
Reset
Restore with backup
Restore as new ( better )

Problem after upgrading to iPhone iOS 7

Gentlemen Apple
I have a problem after upgrading to iPhone iOS 7
Required to calculate the icloud lost me
<Email Edited by Host>

I have the same issue after upgrad my iphone 5 to IOS7?? what is the reason and what is the solution?

OSX Server problem after upgrade to 3.01

Similar Messages

Maybe you are looking for