Osx Snow Leopard Freezing Upon Boot

After dropping my macbook I had a black screen with just a cursor that would move though could not perform any actions. After reseting pram and smc, i now get to the screen with the stars and what looks like the aurora borealis or whatever. The cursor is there though nothing is happening when trying to click and when i press any keys, i gent that *dunt* noise indicating i have tried an invalid action. Does anyone know what might be the problem? I m hoping i wont need a new hd or mobo. This is my first time on the apple forums. Help please.

If you can insert a DVD, find your original OS X DVDs that came with the system, and insert the one that says "AHT Verion x.x" in small print on the label. Boot holding the D key down, and if that doesn't work, boot holding the alt/option key down, choose the Apple hardware test, and when prompted, choose the extended test. This should tell you what hardware is working or not.
If you can't run the Apple hardware test, can you do a safe boot, where you hold the shift key while rebooting?
Can you insert and boot to an OS X DVD by holding the C key down while booting?
Do you have a bootable backup available to you? Boot holding the alt/option key down, and choose the external bootable backup.
If all the above are negative, then take it into the Apple store.

Similar Messages

OSX Snow Leopard freezes MagicDraw

After installing OSX 10.6 my MagicDraw application (version 14) freezes during startup while creating the main window ... does anybody know what's going on or even better how to solve this?
Many thnx
Uslu

Hello u:
Welcome to Apple discussions.
As you know, that application is developed by a third party. I visited their web site and it appears that your version is several behind their current release.
I suggest you contact the software developer to resolve your problem.
Barry

How do i get a dvd with osx snow leopard to boot from since i lost mine?

Having trouble with my early 2009 intel iMac. I have reset PRAM and SRC, used disk utility in safe mode to repair disk permissions (several were found/repaired) and tried to verify disk. System said it could not verify disk because it needed to be repaired while booted from another source. I could not find my OSX Snow Leopard disk, tried to start from Leopard disk. Now the system wont go through boot process at all. the gray screen with logo and progress bar appears, but after a minute the computer shuts down. I did run the apple hardware test (start up while holding D key) and no hardware issues were found. This must be a software issue.
Is there a way I can download a copy of OSX Snow Leopard on my laptop so I can burn a disk to boot my iMac from so I can repair the disk?

You will need the Mac OS X DVD later, because it's clear that there's a problem with the hard disk. Your Mac turns off because fsck couldn't repair the hard drive, so Mac OS X can't start up. Your only option is to format the hard drive, because it's not possible to repair it.
As you have the Leopard DVD, insert it and hold the C key while your Mac is starting. Then, choose your language and go to Utilities menu (on the menu bar) > Disk Utility, choose your hard drive at the top of the sidebar, go to Erase tab and erase the drive. If it's working properly, close Disk Utility and reinstall OS X.
If it couldn't be erased, the hard drive is damaged and you need a different one

Install Disk for Snow Leopard will not boot on an iMac 27in

My Install Disk for Snow Leopard will not boot on my iMac 27in. The Apple Logo is the only thing the user will see. The current OS on the system is 10.6.6. Upon placing the Snow Leopard DVD in the system, the DVD players spins for a few seconds and displays the Apple Logo. Nothing happens after 20 minutes.

Yes, it is ridiculous how it is impossible to install Snow Leopard. I have two Snow Leopard DVDs: one that I purchased for a Macbook soon after it's release (10.6.0), and one that came with my iMac (10.6.4). Both of these boot up my Macbook (running 10.6.7) just fine. My SL 10.6.0 DVD mounts onto my iMac (Lion 10.7.0), but you cannot run the install. I attempted to boot from this DVD and got the infinite white screen and Apple logo, as some have reported above. The other SL 10.6.4 DVD will not even mount in Lion, and will not even show up as a bootable drive when I attempt to select it after holding alt/option on reboot.
I created a bootable external drive from SL 10.6.0, attempted boot, same infinite white screen/apple logo.
I created a bootable external drive from SL 10.6.4 on my macbook. I attempted to boot from this drive, and got the white screen of death, except that this time I actually got the loading symbol underneath the Apple logo. After about a minute of attempting to boot, the Apple logo changed to a circle with a diagonal line through it (the "NO!" sign).
I took my iMac to the genius bar. They inserted SL 10.6.0, which would not boot. Then they determined that my computer had to run 10.6.4 and later. So, they restored an image of SL 10.6.4 onto my partition (not an install from an image, but an image of SL already installed). Hurray! Snow Leopard was successfully shoved onto my iMac!
I then deleted a third partition on my hard drive I did not need anymore, which somehow screwed up my SL partition (even though it said "Will not erase partition SL or Macintosh HD). Now I am back at square one, and I guess I need to take my flippin iMac back to Apple for them to do what I should be able to do.
I like Apple, but sheesh do I hate Lion right now.

MAC OSX SNOW LEOPARD 10.6.3 current version INTEL(R) CORE(TM)2 DUO 2.4 GHZ ,4GB RAM, 250 GB HDD compatible OS Version Clarification

Hi Friends,
                 I have Macbook Pro 14 Inch INTEL(R) CORE(TM)2 DUO 2.4 GHZ ,4GB RAM, 250 GB HDD, unable to login into MAC OSX Snow Leopard 10.6.3 Version but with Boot Camp i can login into Windows 7 Home Premium, so i would like to clean the HDD and install NEW Version MACINTOSH OS, Which of the Latest OS perfectly workout to install in my MACBOOK PRO, I didnot have LAPTOP Backup disc......

Check that your computer is compatible with Mountain Lion/Mavericks.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
our Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If your computer isn’t compatible, you might be able to upgrade to Lion.
Computer Compatibility - Lion                       Lion
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)

When I am re-installing the Mac OSX snow leopard onto an older Mac I run into the window that says select the disk where you want to install Mac OSX but nothing is there to select

I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive. I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?

After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.

I just purchased Mac OSX Snow Leopard Software Version 10.6.3 before I install I would like to know if it will still keep my documents, etc? and not lose them?

I just purchased MAC OSX Snow Leopard Software update to Version 10.6.3. At present my MACBOOKPRO is Mac OS X Version 10.5.8. Since this is the first time I have purchased new software upgrade for my MACBOOKPRO I would like to know before installation if it will keep my documents, etc. intact or would it lose them? Appreciate any help?
Darci13

How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

I Have mac osx 10.5.8 and have tried to update to mac osx snow leopard 10.6.3, but I constantly get the install failed message. What could be the problem?

My imac is currently running mac os x 10.5.8. I've tried to install mac osx snow leopard 10.6.3, but have been unsuccesful because the disc fails to install.
What could be the problem?

noondaywitch wrote:
You should boot from the Installer DVD by holding down the C key during start up until the Apple logo and spinning cog wheel appears. Allow plenty of time for the installer to appear - it can take several minutes when booting from a disc.
I suggest not doing this unless the Apple recommended method (starting by double-clicking on the
Install Mac OS X icon while booted up normally) fails.
There are several reasons for this:
The Apple method performs a check of the DVD's integrity before starting up from it. This can't be done if you start up directly from the DVD.
The Apple method "phones home" using the current OS's network settings to check for updates to the incompatible items database included on the DVD & writes a lot of pre-install data (the 'Mac OS X Install Data' stuff) to the HD before restarting automatically from the DVD to finish the installation. This may not work as expected if you start up directly from the DVD.
The pre-install data on the HD speeds up the installation process (because running the OS from the HD to build the data is faster than doing that while running from a DVD).
The Apple method makes it possible to "gracefully" cancel the installation before the automatic restart occurs without leaving the existing OS on the HD in a corrupted, "half-installed" state unable to restart the Mac. This sometimes happens if the installation process hangs & one has to force-restart the Mac to recover. As long as this occurs during the "pre-install phase" before the restart, the existing OS should remain untouched & intact.
Also note that the Snow Leopard installer is quite a bit more sophisticated than the previous ones like for Leopard or Tiger. It automatically performs the equivalent of Disk Utility's Verify Disk step before beginning the installation & performs more checks during the installation process (including checking the pre-install data for errors). It is usually not necessary to remove the "Mac OS X Install Data" folder after a failed installation, which may just cause the process to take longer on subsequent attempts, but if nothing else helps it is certainly something worth trying.

I have a white Macbook 2009 on OSX Lion. It came with the OSX Snow Leopard CD, I erased the HDD and am trying to install the OSX from disc but am getting "cannot install OSX from disc" message. What can I do?

I have a white Macbook 2009 on OSX Lion. It came with the OSX Snow Leopard CD, I erased the HDD and am trying to install the OSX from disc but am getting "cannot install OSX from disc" message. What can I do?
I got the macbook from a friend a few years ago and it already had OSX Lion installed. Whenever it boots from the Snow Leopard disc it says it cannot install from disc. Is there anythingI can do or should I take it to an Apple store to get them to boot OSX Lion for me?

Insert your Snow Leopard disc and restart, press and hold the C key as soon as you hearthe startup chime, hold C until you see the Apple Logo. When your computer starts up you'll be at the first install screen, choose your language and click the arrow to go to the next screen. This screen has a menu bar, from the Utilities menu select Disk Utility, select your hard drive, this is the one with the manufacturers name or numbers, click the partition tab and then delete any existing partitions by selecting them and clicking the minus. In the drop down box select one partition and click apply. Name your hard drive and click erase. When it's done quit DU and go back to the installer, install Snow Leopard. When the installer is done and the computer is back up and running run Software Update to get to 10.6.8

Top right hand of task bar icons keep disappearing and coming back. I cannot click on any of them as they just go. Also I cannot take screenshots any more. Macbook pro 2007 OSX Snow Leopard

Top right hand of task bar icons keep disappearing and coming back. I cannot click on any of them as they just go. Also I cannot take screenshots any more. Macbook pro 2007 OSX Snow Leopard. Anybody any idea what is occurring?

These Steps should resolve your issue
Step by Step to fix your Mac
If you don't have a backup of your data off the machine
Most commonly used backup methods
If you can't boot the machine and need to get data off it
Create a data recovery/undelete external boot drive
Your options for data recovery
My computer is dead, is my personal data lost?
Secure data removal
How do I securely delete data from the machine?
More:
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

OSX and OSX snow leopard ?

I own a Mac book Pro and Im hoping to buy a reconditioned IMac from Apple store there are 2 models Im looking at, one comes with OSX and the other comes with OSX Snow Leopard. Are these the same thing or is Snow Leopard the later version so better?
Sorry if this seems a silly question
Regards

If the specs are the same on the two units (or close enough for what you want), I would absolutely pick the one with Snow leopard on it - that way you would get a machine that can boot from both that system as well as the latest - Lion (10.7) - which you should be getting a free upgrade code for. Lion does not support some older applications (no Rosetta), so if you have any of those, you could still run them on your new machine. In fact, you could partition your hard drive so you have Snow Leopard on one and lion on the other - that is what I have. You can boot into either one. Except for one Mac, all my machines have been refurbs.

SSD Issue: Can't Install OSX-Can I use Target Mode to Install OSX Snow Leopard onto a laptop?

Cannot reinstall my OSX Snow Leopard from my original disks: 2010 MacBook Pro 7,1.
Cannot do a Recovery Install—just put in a solid state drive, and have to do a clean install, cannot clone old OS off the old hard drive.
Can I make my tower/desktop computer work somehow, I have a .dmg Snow Leopard Installation file on my tower. I'm out of options; I've tried to do a recovery download of Yosemite and usb startup thumb drive. Nothing is working: crashing, stopping short of full installation.
I'm just trying to get any operating system to install on the MacBook Pro. Nothing seems to work.
-the old hard drive had issues that couldn't be resolved, seemed like software.
-swapped it out with ssd drive, had made backup of all files.
-tried to startup with installation disks/ original osx snow leopard disk. Failed, wouldn't complete
-tried to do recovery download installation via internet, cmd-r, with Yosemite but that seems like a long shot. Just kept stalling, so it seems like this model cannot support that os without first having the original os?
-made a thumb drive an installation of osx 10.6.8
-nothing is working

Since you provide no information regarding what has happened other than it didn't work, how can we help you? I can only give you the whole process:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the SSD's entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. You can now log onto the App Store with your Apple ID. Go to your Purchases page and re-download the last version of OS X that you purchased and/or downloaded prior to the release of Yosemite.

Our imac runs osx snow leopard but it cant find the hard drive or it is corrupt, is it possible to reboot it with osx lion?

our imac recently displayed the white screen and flashing file icon with a question mark on it, it runs osx snow leopard but i dont have the installation disc, can i reboot it off the osx lion disc? or do i need to buy the snow leopard disc and reboot it off that first. thanks for your help in advance!

Yes you can. If the iMac meets the system requirements for Lion then you can boot it off the Lion disc (which is actually a USB drive, unless you download and burn it yourself).

When i login to my banks online access point a new browser is opened and it takes up the full 27" display. ca i restrict the size of web browser screen used by tme online banking service? imac 27" OSX snow leopard 10.6.8

Intel iMac OSX Snow Leopard 10.6.8
I logon to bank via its internet portal and next screen takes up all 27" display.
Can this be controlled in any way or do I just put up with it, it is really annoying.

Thank you for your response. Whew...i omitted to say I use Firefox... tried to logon using Safari... same
result Installed Chrome ...same thing Installed Opera... this browser actually has in its Preferences menu
the capacity to set JavaScript Options under the Conent submenu... DISALLOWED all of resizing of windows,
moving of windows and ability of script to hide menu bar ... this fixes the screen to available browser size...
so my issue has at least this resolution. Thank you Flet Cheryl

Since i upgraded to iOS5 my phone is no longer recognized by my MacBook, so I cannot sync. What do I do? MacBook was recently updated to OSX Snow Leopard.

Since i upgraded to iOS5 my phone is no longer recognized by my MacBook, so I cannot sync. What do I do? MacBook was recently updated to OSX Snow Leopard.

Start by downloading the latest version of iTunes and reinstalling it.

Osx Snow Leopard Freezing Upon Boot

Similar Messages

Maybe you are looking for