OSX Tiger 10.4.3 Will Not Update!!!!!! Please Help....:)

Can anyone help me???
I have a Power Book G4 15" Ti 867Mhz1Gb RAM which I recently upgraded the HD to a Samsung 160GB, at the same time I also upgraded OSX from 10.3.9 to 10.4.3.
Since the upgrade my operating system seems to be stuck on 10.4.3.(ie will not update)
I have tried everything, from repairing disk to repairing disk permissions (using OSX Tiger install disc), reboot upgrade, reboot archive & install, but i am still not able to update the OSX...:(
I have manually downloaded Delta (10.4.4) & Combo (10.4.6, 10.4.8 & 10.4.9 PPC updates but they all say my volume does not meet the rquirements.
I have checked about this mac and i am definitely running 10.4.3....
Why am I unable to upgrade????
If anyone can help it would be greatly appreciated!!!
Many thanks in advance!!!
Adam

Hi guys I appreciate your assistance...but i am still stuck on 10.4.3!!
I just ran archive & install again (OSX 10.4 Tiger) and still I am unable to update from 10.4.3..Is it possible my install disk is faulty??? I have tried absolutely everything including applejack, disk permissions, disk repair ect...nothing seems to make any difference.
Same old statement when manually updating from apple website (using both delta & combo) "this volume does not meet the requirements"
My automatic software update works fine, it just installed the latest iTunes 7.2 no problem, it just wont detect the OSX upgrade...:(
I am about to upgrade my combo drive to a Pioneer DVR K06 and really wanted to upgrade my OSX to 10.4.9 before I install the new optical drive...
Anyone else have any suggestions????

Similar Messages

TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Try this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Iphone 3G will not update - please help

Dear all
I am having repeated problems updating the software on my iPhone 3G and have not been able to do so for almost a year.
I am using the latest version of iTunes and the software downloads fine. The problem occurs during the back up. iTunes tells me it will back up my apps, contacts etc and then the back up box pops up and the green progress line run through a few times. It then (extremely slowly) climbs to three green bars and then nothing happens.
I have had problems backing up before but I managed to make a back up last night with no problems. I then tried to update the software, left it for four hours and exactly the same thing happened. Today's attempt has been going for 30 mins and is only at one bar at the moment.
I have tried everything people have suggested on these discussion pages including using different cables, USB ports, deleting previous back ups, configuring my firewall (Norton) and turning it off altogether. The only thing I haven't tried is restoring the phone - I'm loathe to do so as I don't trust iTunes not to screw the whole thing up now.
Could this be a problem syncing my contacts? iTunes tells me it wants to do this but I don't recall setting anything up with Outlook to do this.
Can anyone help - I know this is a common problem, all you need to do is put "cannot up" in to Google and one of the most popular searches is "cannot update iPhone"!! There surely must be a solution, can anyone help before I go crazy?

Hi What could be happening is slow internet connection, obviously with every update your itunes connects to apple and open a communication to assess if your phone can upgrade... etc...
but if you have a slow connection that authorisation period my elapse meaning that the communication with apple is disconnected...
if you look online for IPSW files and find the one you want - there are a few sites out there that do this and more often than not they link direct from apple...
once this is downloaded open itunes then CTRL + click update, then go find the file you just downloaded, and this should allow you to upgrade...
This is the sam process I have used for Beta Software and on my mates 3G to get him on to the latest 4.1 as he was for ages stuck on 4.0...

Installed iTunes on a 1TB drive designated H:. Bought a 3TB drive designated G:. Downloaded iTunes update. On "Run" command, it will not let me change the destination drive, so it registers an error, and will not update. Help

Installed iTunes on a 1TB drive designated H:. Bought a 3TB drive designated G:. Downloaded iTunes update. On "Run" command, it will not let me change the destination drive, so it registers an error, and will not update. App freezes, windows says to upgrade it.

I went to Edit>Preferences>Advanced, G: is showing as the destination drive.

IPhone 4 will not update! HELP!

Hi all,
My iPhone 4 will not update to IOS 5.0, an error message keeps coming up that that 'network connection timed out'. I'm connected to my Wi-Fi at all times.

I had the same problem. I waited about one hour with the progress bar on iTunes at about 50% and the progress bar on my iPhone 4 at about 20% with no further progress.
I unplugged iPhone, got the error message (9), shut down iTunes, restarted my Macbook Pro, did a hard reset on iPhone and then reconnected to my MBP. iTunes launched and notified me that my iPhone needed to be "restored."
I went ahead and did the restore, which took only about 8-10 minutes. I did not restore the prior iphone backup, but chose to synch it as a new iphone. All went well. It now shows iOS 4.2.1 and all I have to do is manually install the apps I want, etc....
I hope this helps.

When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

http://borgdatanode42.selfhost.me/blog/index.php?#param=id_48
try to using iTunes via remotedesktop? try without.

Whenever i open my macbook the rainbow spinning wheel continues to spin and will not load PLEASE HELP

whenever i open my macbook the rainbow spinning wheel continues to spin and will not load PLEASE HELP

Which os version are you using?
Please describe in detail all you have attempted to do in order to resolve the issue.
Troubleshoot the spinning beach ball

Tryed installing vista on my mac now os will not load please help

Tryed installing vista on my mac now os will not load please help

Some information please. What MBP model? What OS are you running? How didi you install Vista?

Windows Update Error Code 80072F8F! I Did All The Steps And Will Not Fix Please HELP?

No one seems they can not help me fix this error code I did many things and not one person has really
helped me, I have a question at another forum but all they do is just ask me questions tell me steps to fix this but nothing worked at all, This happened on 8/30/2014 and ever since no one can help me fix this at all....I have no money to pay for the fix...I
am on very very low limited disability income, No credit cards nothing. I need help now I paid a lot of money for my Windows 7 Ultimate and now since 8/30/2014 I got that error code no one has helped me....PLEASE help me please....And I am not sure where to
go for help here thank you. I have done many things but nothing is fixing this issue. please help...And yes I did the clock and clock keeps perfect time, doing that clock did not fix this error code at all...

Hi Angelsims,
First I also want to get more information from you to help us to troubleshhot:
1.Did this error occur on a single update or multiple updates? please also post the update name in issue.
2.Please also post the steps you have followed to fix this issue.
In addition, please try to use the general steps to troubleshoot the windows update issue, and refer to the steps below:
The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.
Stopping services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then press ENTER after each command.
        net stop wuauserv
        net stop bits
net stop cryptsvc
Please do not close the Command Prompt window.
Renaming folders pertaining to Windows Update
1.     At the command prompt, type the following commands, and then press Enter after each command:
2.     ren %systemroot%\System32\Catroot2 Catroot2.old
3.     ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
4.     Please do not close the Command Prompt window.
Registering DLL’s pertaining to Windows Update
1.     Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT
2.     If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its     icon.
   -or-
3.     You can manually type each command at the command prompt:
         regsvr32 c:\windows\system32\vbscript.dll /s
         regsvr32 c:\windows\system32\mshtml.dll /s
         regsvr32 c:\windows\system32\msjava.dll /s
         regsvr32 c:\windows\system32\jscript.dll /s
         regsvr32 c:\windows\system32\msxml.dll /s
         regsvr32 c:\windows\system32\actxprxy.dll /s
         regsvr32 c:\windows\system32\shdocvw.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wuaueng.dll /s
        regsvr32 wucltui.dll /s
         regsvr32 wups2.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 Softpub.dll /s
        regsvr32 Mssip32.dll /s
         regsvr32 Initpki.dll /s
         regsvr32 softpub.dll /s
         regsvr32 wintrust.dll /s
         regsvr32 initpki.dll /s
        regsvr32 dssenh.dll /s
        regsvr32 rsaenh.dll /s
         regsvr32 gpkcsp.dll /s
         regsvr32 sccbase.dll /s
         regsvr32 slbcsp.dll /s
         regsvr32 cryptdlg.dll /s
         regsvr32 Urlmon.dll /s
         regsvr32 Shdocvw.dll /s
         regsvr32 Msjava.dll /s
         regsvr32 Actxprxy.dll /s
         regsvr32 Oleaut32.dll /s
        regsvr32 Mshtml.dll /s
         regsvr32 msxml.dll /s
         regsvr32 msxml2.dll /s
         regsvr32 msxml3.dll /s
         regsvr32 Browseui.dll /s
         regsvr32 shell32.dll /s
         regsvr32 wuapi.dll /s
         regsvr32 wuaueng.dll /s
         regsvr32 wuaueng1.dll /s
         regsvr32 wucltui.dll /s
         regsvr32 wups.dll /s
         regsvr32 wuweb.dll /s
         regsvr32 jscript.dll /s
         regsvr32 atl.dll /s
         regsvr32 Mssip32.dll /s
Restarting services pertaining to Windows Update
1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
2.     If you receive a notification from User Account Control simply click Continue.
3.     At the command prompt, type the following, commands and then
press ENTER after each command.
        net start wuauserv
        net start bits
        net start cryptsvc
   exit
Please try the steps above, if the step failed, please post the error or failure information.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

Bootcamp update 3.1 and 3.2 will not install please help

I am running windows 7 32 bit on a silver mac book pro. it wants me to update my boot camp version from 3.0 to 3.1 but when i go to download it, it comes up with a progress box but then after a while it gives me an error basically stating that if this problem persists try just downloading it and installing it manually well i have done both ways even downloaded it form the apple website to which no avail. when i go to run the standalone updater it give me the error " the application was unable to start correctly (0xc0000005) click OK to close the application" i have tried running it as an administrator, and using the compatibility mode tried it with xpsp2,3 and vista sp2,3.. please help me as i am not the only one having this problem in my department

I donno if this is much help, but here goes.
This was my problem: When I upgrade boot camp from 3.1 to 3.2 using the apple update software (online, and on my windows 7 64bit) It didn't upgrade. I did the restart and everything went smoothly, but it just didn't upgrade.
Then I went on to apple boot camp software site to download the software to upgrade manually, then It says I need to locate bootcamp64.msi or something close to that.. I couldn't locate it on my hard-drive... so failure there
Turns out that file is on the MacBook Pro Mac OS X install DVD, under boot camp - apple
direct the location there and click on the bootcamp64 thing, and it should work (If you have the same problem as me)

My iPad 3rd generation is giving me a pop up saying "this iPad hasn't been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked, and connected to wi-fi" I have plugged it in and connected to wi-fi and still it will not update. Help!

The pop up will not go away for me to be able to unlock the screen, or power it down, or to get into my settings. I need help please!

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

TS1717 iTunes will not open- please help!

My iTunes will not open. I've tried uninstalling and reinstalling, but the same message keeps showing up when I try to open iTunes. The error reads "C\Windows\system32\dssenh.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support."
Please Help!!!

Taken at face value, you're having trouble with one of the Windows OS dlls associated with Cryptographic Services.
I'd first try the fixit from the following Microsoft document. (One of the things it does is reregister your copy of the dssenh.dll file.)
You cannot install some updates or programs
... but if you still get the issue, I'd try an sfc /scannow as per the instructions in the following document:
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

My Iphone Will Not Restore, Please Help.

Hello,
I fell asleep while facetiming, I woke up and found that my iphone will not turn on, which is odd, since I was charging it. I then took it off my charger and then put it back on. The Iphone 4 then showed the Apple Insignia for about 10 seconds, then became a dark screen, then back to the insignia. It did this repeated flashing for a good ten minutes. I then took it off the charger and the phone stopped flashing and it became totally dead. I tried pressing the home button, and the top button, but there was no effect. I then plugged in my Iphone to the computer and put it into recovery mode. I tried to restore it, but it continually keeps getting an error (21). I tried it on a different computer, will not restore, but got a different error (I believe it was the error (1604)). I tried restoring it multiple times, I updated my Itunes to the latest version, I made sure my connection was well. I tried taking my Iphone off of recovery mode, but it did not work.
I suspect that my problems are due to the fact that my Iphone will not stay on without being connected to a power source, and that is the reason for all the errors. I tried it on different USB ports and different computers. Please correct me if I am wrong, and please help me figure out what I should do next. I do not mind losing all my contacts, but I do mind if I have to spend money on a new phone, afterall, I barely even had this phone for a year.
So Please, I am begging. Please help me and tell me why doesn't my phone stay on without being connected? Is it because I fell asleep while facetiming and because neither of us hung up it over-heated and killed the battery? Is there an easy way to fix this since I am technologically-impaired? Is there any hope for me and my Iphone's future?
Any answer will be very much appreciated.
Thank You.

It sounds to me like you either got defective parts or otherwise did not make the repair correctly. We cannot help with self-repairs here, the iPhone officially not user servicable, but you can ask for advice in the forums on ifixit.com, a site which is dedicated to those attempting their own repairs.
Regards.

Ibook will not boot PLEASE HELP!!!!

Hi,
First the ibook booted then would come up with the kernel error: square box with "you need to restart your computer. Hold down the power button for several seconds or press the restart button......
I then booted to single user mode and ran fsck -y which eventually came up with the all clear "The volume Macintosh HD appears to be OK"
I then restarted the system which booted to the blue screen with some quirky graphics towards the top. It will now not boot into single user mode, just black screen or multi-coloured stripy screen. When booting from the CD drive the sceen is just blue or black.
Okay, I have connected the ibook via fire wire to a powerbook, and re-booted the ibook in terminal mode which brings up the fire wire connect symbol on screen.
After a while the system stalls showing part of the symbol and the connection is frozen. I have tried to re-install tiger using the powerbook to initiate as the ibook will not. However, it freezes at 50% of install.
I changed the ram to iliminate a ram failure, however... still the same.
While I was in terminal mode I erased the disk using the disk utility from the PB and then ran the install again... still froze.
This looks more serious than I thought. I'm now thinking that it could be the hard drive or worse. I have tried to use the apple support phone # and it does not seem to work, 1800 275 2273.
I'm having some real bad luck here. Any ideas?

I ran the apple hard ware test disc. The quick test found no errors. The extended test freezes up completely. Now I'm really stumed. The logic board came up with know errors.
When the system froze on the extended test. I falsed a re-boot. However the screen went black so I could not run the test again. It seems like a time thing... the ibook can only run for a short period before it freezes. Then it has to shut down for a while before it can run again

PDF will not print please help

I am using Win7 64, updated print driver, updated Adobe. When I try to print a pdf document it will not print unless I restart my computer for each document. I can print Word documents but not pdfs.

Please follow the workaround available at http://forums.adobe.com/thread/949886?tstart=30 in order to resolve this issue.
Thanks,
Atul

OSX Tiger 10.4.3 Will Not Update!!!!!! Please Help....:)

Similar Messages

Maybe you are looking for