OSX Yosemite driver for Canon LBP3000

OSX Yosemite driver for Canon LBP3000 needed. When will one be available?

Hi smukhi!
 I will be glad to assist you.  The driver is now available for the commercial release of the OS X 10.10 (Yosemite) driver.  I recommend uninstalling the previous driver before installing the latest driver.  To uninstall the driver, please follow the instructions below:
1. Click the [Printers & Scanners] icon in [System Preferences].
2.Select the printer you use on [Printers], then click [-].
3. Delete the printers that are registered, then close the [Print & Scan] dialog box.
4. Open Finder application of your Mac OS X.
5. Select [Go] → [Go to Folder] from the menu bar.
6. Enter the following folder locations, click [Go], then delete the files and folders.
Delete Example: You can delete files and folders by dragging them to the [Trash] icon in the Dock.
Location
Files and folders to delete
/Library/Printers/Canon/
CUPSCAPT
/Library/LaunchAgents/
jp.co.canon.CUPSCAPT.BG.plist
/Library/Printers/PPDs/
Contents/Resources/
Delete all the following files in the folders.
CNMCxxxAUS.ppd.gz
(xxx is a model name starting with [LBP].)
When the [Authenticate] dialog box is displayed
Enter the administrator's name and password, and then click [OK].
7. Close all open windows.
8. Restart your computer and empty the Trash Bin.
The printer driver is uninstalled.
Next, go to the imageCLASS LBP6000 - Drivers & Software page, and then download the file CAPT Printer Driver Ver.3.67 for Mac OS X 10.5/10.6/10.7/... listed under the [Recommended for You] section.
After installing the printer, please follow the instructions below to add the printer:
1. Click the [Printers & Scanners] icon in [System Preferences].
2. Click [+].
3. Click [Default], and then select the printer to be used from the printer list.
4. Select [Select Printer Software] from [Print Using].
5. Select the printer to be used from [Printer Software], and then click [OK].
6. Click [Add].
7. Make sure that the printer to be used is displayed, and then close the [Print & Scan] dialog box.
The printer registration is now completed.
I hope this information is helpful to you.  Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Yosemite Driver for Canon LBP 2900

    Hi there,
    Now that Yosemite has been installed and working well, I am left with a non-functional Canon LBP2900.  On Mavericks, it worked well with the patch but seems it doesn't carry across to the new OS.  I have reset my printer settings and re-patched the system as per Mavericks but no joy.
    Any tips? or lots of printers going into the bin!!!
    Regards
    Jafar

    Re: I can't use canon LBP 2900 in Yosemite 10.10.
    Wanderer75
    Oct 21, 2014 4:17 AM
    Re: I can't use canon LBP 2900 in Yosemite 10.10.
    in response to Thet Aung
    I finally solved the problem.
    1. Delete your printer in Printers and scanners preferences.
    2. Restart computer.
    3. Download and install the following driver (version 3.67 has just been released for Yosemite): http://support-au.canon.com.au/contents/AU/EN/0100420705.html
    4. Restart computer.
    5. Download and install the patch appearing at step 3 on this page: http://macdaily.me/howto/how-to-install-canon-lbp2900-on-mac-os-x-mavericks/
    6. Restart computer.
    7. Connect the printer with USB, add the driver in Printers and scanners preferences, select the appropriate driver.
    8. Enjoy the rest of the day.
    It works for me!!!

  • I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

    I need a driver for canon image Class LBP6000 for Mac Mini Yosemite

    Go to: > http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/laser_pri nters/imageclass_lbp6000#DriversAndSoftware
    It does not look like the Canon driver has change from Mavericks to Yosemite.
    If you just updated from Mavercks to Yosemite, see > OS X Mavericks: Reset the printing system
    If you have a new or clean install of Yosemite, see  > OS X Mavericks: Set up a printer

  • OSX 10.8 AND CANON LBP3000

    how can I connect the printer as the official driver is not supporting this OS?

    The official driver for the LBP3000 is the CAPT v3.55 driver and it does support OS X 10.8.x.
    The driver supports mutilple models of Canon laser, so the link Gerald has provided a link to for the LBP6000 is also for the LBP3000. But this is for the US models of LBP. If you are outside of the US, then you should use the UK English driver.
    http://support-au.canon.com.au/contents/AU/EN/0100420705.html

  • Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

    need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

    Try with the latest Apple driver package for Canon (released 15th Feb):
    http://support.apple.com/kb/DL899
    This solved my problem with the printing.

  • I can't find the yosemite driver for my epson r3000 printer.

    I can't find the yosemite driver for my new epson r3000 printer. I am using 10.10.1. The Epson website says to find the driver by going to the App store and looking for updates. I did that and didn't find any.  In "Printers and Scanners" in System Preferences I notice that the computer is aware that I am connected to the printer (via USB) but a message  at the bottom of the window says that "Software for this printer isn't available from Apple. Contact the printer's manufacturer...".  What to do?

    See -> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 173163&prodoid=63090295&infoType=Downloads&platform=All.
    It looks as though Epson has a driver compatible with Yosemite.
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10.1, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • Can't install win7 scanner driver for canon pixma mp260, help please !!!

    can't install win7 scanner driver for canon pixma mp260, help please !!!

    HOW CAN I FIX MY PIXMA CANON WITH OUT THE CD

  • Missing raw file driver for Canon S90

    I miss raw file driver for Canon S90. The software delivered with the camera works, but it doesn't work in finder, Aperure and so on, just in Canons own software. When will the driver be available for SL?

    Apple hasn't said anything about it, but they're always quiet on everything (I think this works to their advantage for new products, but it works to their detriment for product updates.)
    Anyway, they recently released the latest Camera RAW update and surprised a lot of people by not including the S90. Adobe had problems with the S90 -- images would "load" but looked poor. I can only guess Apple also had problems and decided to push it to a later date rather than hold up the whole stack of RAW camera updates people had been waiting on (typically they release an update with support for a list of cameras).

  • Unable to install a software driver for Canon film scanner on mac OSX 10.6

    I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.
    I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select "/var/log/install.log" from the file list. Post the messages from the last installation attempt, starting from the time when you launched the Installer or Software Update.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Need help with driver for Canon Selphy CP810 osx 10.8.3

    I need help to get my Canon Selphy CP810 running .
    Could not find a driver that works on the WEB.

    Here's a driver from Canon for 10.8.x.
    Clinton

  • Driver for Canon c5035i on Mac OSX 10.10

    Hi,
    I am working on OS X 10.10 on  and I cannot connect to a Canon C5035i printer. I have downloaded each and every driver I could on the Canon website but the printer is not recognized. Even by pointing it with its IP address, the driver is not recognized.
    Can anyone help me?
    Thanks and regards
    Max

    Tki.design wrote:
    But when I try to print a document, it appears for 1 second in my printing list then disappears and no print is done...
    This can happen when using the Postscript driver but the C5035 does not have the Postscript kit. So even though you can see the toner levels after adding the printer using the Postscript drivers, it does not mean it supports Postscript. To check if the printer has the Postscript option installed, you can go to the copier and press the Counter Check button. Then on the touch screen, press Device Configuration. You may need to scroll down a page or two. You will see the UFR2 option and possibly PCL. If you don't see PS then it does not have it. So in this case you would need to use the UFR2 driver. Here is a link to the latest UFR2 driver for 10.10.
    If the C5035 does have the Postscript option then the other cause for the print job failing is the protocol being used for the print queue. The Canon drivers support the LPD and HP Jetdirect protocols - not IPP. And there has been some users who have found that the LPD protocol does not allow them to print, while the HP Jetdirect protocol has always worked. So if you cannot remember which protocol you used when creating the printer, then remove the printer and add again, selecting HP Jetdirect-Socket for the protocol.
    The last thing that can stop the print job is Dept ID Management. This is a security setting in the copier that requires you to enter an ID/PIN to make a copy. If this is enabled for printing also, then you have to enter an ID/PIN for all print jobs, otherwise the print job will disappear. To check if you need to enable this setting, open Printers & Scanners and select the C5035. Then click on Options & Supplies and then the Utilities tab. Then click on Open Printer Utility. This will open the Canon Printer Utility for the respective driver. Here you will see a Printer Information button. Press this to open another window which will show if Dept ID Management is enabled. If it is, then it explains why you prints have been failing and you will need to configure the driver to use an ID/PIN in order to print. Reply if you need help with configuring the driver to use Dept ID management.
    If there is no mention of Dept ID in the Printer Information window, and the C5035 does have Postscript kit and you did use the HP Jetdirect protocol, and it still fails to print, then please reply.

  • Need printer driver for Canon imageclass D320

    Anyone direct me to a printer Driver for the Canon Imageless 320?
    Canon support says none available.
    Macbook pro under Yosemite.
    thanks

    Canon never made an OS X version of its proprietary driver "CARPS" that is used by the D320. And the Canon driver link provided above is just for Canon inkjets - there is no support for your model.
    If you want to print to the D320 from the Mac, you would need to install a virtual machine application like VMware's Fusion and then load Windows 7 into the VM.

  • Printer driver for Canon MP730

    i am am totally fed up with my HP 8500 officejet printer (paper jam all the time). I want to start using my older printer (Canon MP 730) again in combination with an iMac running on OS X Yosemite
    DId anyone find a printer driver for a Canon MP 730 that works properly with an iMac running on OS X Yosemite?  I am only using the printing and scanning function of  the Canon MP 730 (do not use the fax).

    The MP730 was released in 2003 and support ended in 2010. The last OS X driver that Canon released was for Mac OS X 10.6 and this will not install on Yosemite.
    So your options are Gutenprint v5.2.10, which is free, or PrintFab, which costs €49. 
    Note that Gutenprint v5.2.10 is not digitally signed for Yosemite so its installation will be blocked by Gatekeeper. To get past Gatekeeper, right-click on the Gutenprint installer package and select Open from the pop-up menu that appears. Now you will get the option to install.

  • Driver for canon pixma mp810

    after yosemite update i cannot connect with my printer, canon pima mp 810. canon say it is no longer supported!!!!!!!!

    You may be able to install and use the MP810 driver for OS X 10.7. Note that its digital signature is not for Yosemite so Gatekeeper will stop you from installing it. To get past Gatekeeper, right-click (or Control-click if right-click is not enabled) and select Open from the pop-up menu that appears. You will now get the option to install the driver.
    If you have any trouble printing with the OS X 10.7 MP810 driver then you should install Gutenprint v5.2.10 and select the Canon MP810 Gutenprint driver.

  • How to install Windows 7 64 bit driver for Canon i9100 Printer?

    When I try to install my Canon i9100 printer on my HP laptop running Windows 7 Professional 64 bit, Windows cannot locate a driver.  Visiting the Canon website, I find an update module for the Windows driver.  Canon says the printer MUST be installed using Windows Updater before their driver update can be installed.  I have tried everything, but I cannot get Windows to find a driver.  Windows Updater says that my computer is Up To Date.
    What am I doing wrong?
    Thank you,
    David

    Hi Honeycutt,
    The Windows 7 driver for your i9100 is only available from Microsoft through Windows Update.  Please try Microsoft's web page for assistance with troubleshooting this:
    http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers
    If you continue to have difficulties, please contact our support group using the following link:
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for