OT Epson custom paper sizes saved to Epson driver

OS 10.4.11; Dual 2.0Ghz G5 PPC; Stylus Pro 10600
I'd like to transfer from one HD into another the custom sizes I entered into the Epson driver.
Can't find them; is this possible?
TIA

Hi JedK,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
Hope this helps, have a good one!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Similar Messages

  • Managing Custom Paper Sizes with the Epson 2000P

    Hi,
    I recently started using the iMac and after installing the software for the Epson 2000P found that I could not print a 13 x 44 image. I set up a custom paper size and when the page printed it only printed 18" of the image. I tried the Epson 1280 with the same set up and was able to get 22". I thought maybe the file was to large a cut it in half with no luck. I increased the memory allotment of the program as well and still no luck. I have emailed and called Epson support and can't get any answers from them so I thought I would check here at Apple. If you have any advice I would greatly appreciuate it.
    Thanks
    2 GHz Intel Core 2 Duo   Mac OS X (10.4.10)  

    Hi,
    Crystal Reports 2008 supports custom page sizes.  You can set this in the Page Properties for the report in the Crystal Reports Designer, I'm not sure if you can set it in the SDK as well.

  • Problem Managing Custom Paper Size Using Epson RX500

    Since updating my Mac to the latest version Yosemite, when I now try to Manage Custom Paper Size in the Epson print box via my Photoshop Elements 11, Photoshop crashes. Has anyone experienced this problem? If so have you found a solution please?

    Hello Bridge. Thanks for the reply. I am not sure where the Elements Print dialogue is but, having come back to answer, I can see the "More like this" box on the right and viewing those posts confirms what you say. It would appear from one of the posts that Apple is aware of the problem and may be working on it. However, one of the posts opposite suggested using Print Preview to set the custom print size and print from there. I found this works for me. So, thanks again for your consideration. Regards. Brian.

  • Problem Managing Custom Paper Size Using Epson

    Since updating my Mac to the latest version Yosemite, when I now try to Manage Custom Paper Size in the Epson print box via my Photoshop Elements 11, Photoshop crashes. Has anyone experienced this problem? If so have you found a solution?

    Hello Bridge. Thanks for the reply. I am not sure where the Elements Print dialogue is but, having come back to answer, I can see the "More like this" box on the right and viewing those posts confirms what you say. It would appear from one of the posts that Apple is aware of the problem and may be working on it. However, one of the posts opposite suggested using Print Preview to set the custom print size and print from there. I found this works for me. So, thanks again for your consideration. Regards. Brian.

  • Custom Paper sizes not saving

    Hi everyone
    Our IT department has just installed Acrobat X Pro on our PC and I have downloaded the instructions for printing custom paper sizes, but they don't save. I go to the printers and faxes, right click on the pdf printer, click on add under the PDF settings tab, add the name, dimensions etc ... click on modify/save ... and nada. When I go to print it isn't there. What am I doing wrong. I know it's going to be something really simple and I'm being a numpty.
    It's so much simpler on the mac. lol

    Hi Daniel. Thanks for that. It will let me gang up, but not repeat the page so I have a full page of the same thing. I read somewhere on here that I need a plug in for that. Is this correct? The thing is, I'm their graphic designer and they're making me redundant in a couple of months so I won't be here to keep on top of things for them. I use a mac which works perfectly, but they're wanting everything set up on the PC before I go because no-one other me uses macs and they want to put the system to bed. I expect they're going to have keep it going if they don't get the admin rights. To be fair, I really shouldn't care ... but I do. I'm such a sad sack. lol
    Thanks for all your help with this.

  • Photoshop crashes when i try to manage custom paper sizes through printer setting

    i have recently updat my imac to Yosemite, now i cannot update my custom paper sizes without photoshop crashing, Any Idea's? The printer i have is a epson 4900

    What version of Photoshop are you using?  Have you installed all the updates?
    And have you contacted Epson to see if they have updated drivers that work with MacOS 10.10?

  • Problem with custom paper size on dot matrix printer

    Hi All,
    I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
    Thanks for any advice for me.
    Han

    Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
    Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
    Ludek

  • Unable to Set Custom Paper size setting of 15 (width) x 12 (Height) using J

    Hi,
         I am unable to print the report using the custom paper size setting of  15 (width) x 12 (Height)  with printer friendly fonts so that we can print on Line or dot matrix printer.
         This problem is not solved from last 3 months and we dont get help anywhere.
         We are using Java with Crystal Report XI R2 design for the same. 
                           ITable table=null;
    DatabaseController dbCtrl=null;
    ReportClientDocument oReportDoc=null;
    try {
    String reportName=fileName;
    oReportDoc=new ReportClientDocument();
    oReportDoc.open(reportName,0);
    dbCtrl = oReportDoc.getDatabaseController ();
    rs=ad.sqlStringBigST(query);
    table = dbCtrl.getDatabase ().getTables ().getTable (0);
    dbCtrl.setDataSource (rs, table.getName(), "Runtimeres");
    Object oreportSource=oReportDoc.getReportSource();
    IReportSource reportSource=(IReportSource)oreportSource;
    PrintReportOptions printOptions = new PrintReportOptions();
    printOptions.setPrinterName("EPSON FX-2175 ESC/P");
    printOptions.setPaperSize(PaperSize.useDefault);
    options.setPaperSource(PaperSource.manual);
    oReportDoc.getPrintOutputController().printReport(printOptions);
    } catch (Exception e) {
    System.err.println(e.toString());
    Please let me know what is the solution for the same.
    Regards,
    Raj

    Hi,
        Yes i can understand that you need to first understand the root of the problem to give me the solution.
        I am here to answer to your questions until you understand what is the problem.
        Yes if i set the standard page size which are given in API doc , it sets up the page correctly.
        Following page size as given in the API doc works fine.
        http://devlibrary.businessobjects.com/businessobjectsxi/en/en/RAS_SDK/rassdk_java_api_doc/doc/rassdk_java_apiRef/com/crystaldecisions/sdk/occa/report/document/PaperSize.html
       It is rejecting the custom paper size and custom fonts (which in my case are printer friendly fonts).
    Regards,
    Rajshekhar SIpoy

  • CS6 Problem with Custom Paper Sizes

    When printing on Epson printers (4800,4880,4900) in the Photoshop print settings dialogue box it won't allow me to print at a custom paper size using the sheet or manual feed settings. The paper feed option defaults to Roll Paper when I create the custom paper size, and then when I change it and try and save the settings it just reverts back to roll paper. If I try and send a print after this then the printer won't accept it because it's being told to print on a roll instead of sheet. Why is this?? I'm using CS6 and OS 10.7 and I've never experienced this problem with any previous Photoshop/ Mac OS X before. Please help!

    I use a pc therefor Windows and PC Photoshop.  Anyway The way this works in Philosophy windows print dialog you have to set both Photoshop print settings and the printer driver settings.  And if Photoshop is to handle colors you must set off the device drivers color management. Photoshop Dialog has a printer setting button. I use that to set the device driver setting like color management off, print quality and custom paper size and source roll paper.
    I also wrote a script to tile image into a document for printing on roll paper and eliminate paper  waste. http://www.mouseprints.net/old/dpr/PasteImageRoll.html

  • Problems with custom paper sizes in Lightroom

    Running Mac OS-X 10.9.3 (Mavericks). using an Epson Stylus Pro 3880, latest driver installed as confirmed by Epson tech support this morning. using Lightroom 5.4.
    I only see this problem in Lightroom -  not in Photoshop - which leads me to conclude that the problem is not an Epson-driver problem.
    The problem is the following:
    In the Print Module, I click on 'page Setup' bottom left. I define my custom paper size under 'Paper Size' -> 'Manage Custom Sizes'. Click OK.
    I then enter 'Print Settings...' bottom left adjacent to the 'Page Setup' button. Select my printer, click on the 'Layout' drop-down list box button and select the 3rd tab in the list: 'Paper Handling'. Here is the problem: the 'Destination Paper Size' option is grayed out and unelectable, and incorrectly shows 'US Letter', which cannot be changed. If I click on 'Scale to fit paper size', and try to make a print to my custom paper that way, it still does not work: it only prints on a fraction of the whole paper.
    I have also tried Apple menu -> System Preferences -> Printers & Scanners to change the default paper size there, but it makes no difference - it still incorrectly shows as 'US Letter' in Lightroom.
    This problem does not occur in Photoshop: In Photoshop, if you go to File -> Print in the menu, and then hit the 'Print Settings' button near the top, my custom paper size is selectable in the 'Paper Size' list box. So it is a problem which is specific to Lightroom.
    Any help appreciated. I have spent most of the day on the phone to Epson and Adobe Tech Support, and no-one has been able to dove the problem
    Thanks,

    I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix.  I just upgraded to Lightroom CC, and my problem migrated with the upgrade.  I print in Photoshop fine.
    If you found an answer, I would appreciate  knowing how to do it!
    Thanks

  • Preview buggy when printing multiple pages per sheet using a custom paper size

    I have a square book I've designed and I've printed the pages to a PDF. Now I'd like to re-print the pages so you can see facing pages together exactly like when, in preview, you select "View > Two Pages".
    Each page is 12x12 so I'd like to re-print them to be 24x12 (24-wide)
    I was previously able to do this in preview (prior to mountain lion) using the "layout > two pages per sheet" option with a custom paper size but when trying with Mountain Lion, the print-dialog preview doesn't match the output when saved as pdf; pages either get shrunk or cropped without my permission and it generally seems to be buggy. I've been playing around with it for over an hour and can't get two pages side-by-side to take up a full 24x12 custom virtual page when saved as PDF
    I would expect the print preview to accurately display what will be printed (saved as PDF) and I am guessing that maybe the printer selected (HP all-in-one) is affecting the preview and save to pdf options?
    Can someone tell me how to achieve a printed rendition of the "view > two pages" layout?

    I have a little more information. I turned on "single hairline" border and as you can see, it's converting my square pages into "US Letter" pages BEFORE applying them two-to-a-page. So it's using my selection of "Paper Size" as both the source and destination paper size, rather than just the destination size, because my source is obviously 12x12 square (confirmed by looking at page properties in preview). Apple, please fix this

  • HP Officejet Pro 8100 ePrinter & custom paper sizes

    Have found all the helpful instructions about creating new custom paper sizes in Windows 7. But am complete novice & need to buy a printer for a charity. Settled on this model because of good reviews but most work will be 1 document of custom paper size. Need to know if the instructions given are fail-proof!! (Before i spend their money.)
    This question was solved.
    View Solution.

    Hello invqn,
       after having performed some detailed research, as well as installing the Pro 8100 (and other products) on a Windows 7 system, we determined the Pro 8100 doesn't support Custom Sizes:  that was by design and intent.
       Note that one of our engineer's proposed using a different set of drivers (from an older device) as a potential work-around, but this is unproven and may serve to limit your overall functionality of the device.
       However, we did confirm that a newer device that is currently out, the HP Officejet Pro 8610 (or 8620 or 8630) e-All-in-One, DOES support custom sizes; these are multi-function printers.
        Using the instructions in the link you sent, you can create new Forms with custom sizes and it will show up in the Printer Properties for you to use/select. It supports custom sizes from 3.00 x 5.00 in. to 8.50 x 14.00 in. 
       Our intent is only to provide information on what we know; you might take a moment and perhaps see if an HP Marketing representative might be able to give you more information, but that's what we have.
       We hope this helps....
    Regards,
    HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
    How to Give Kudos | How to mark as Solved

  • Custom Paper Size : Migrating from 6i to 10g report server engine

    Hi,
    pardon my bad english !!
    I'm studying to migrate form/reports 6i to 10G. In report 6i we have reports with custom paper size ("A5" format that is half of "A4", 15x21cm).
    In report server 6i environment (Win2000 server) we have done this configuration.
    - We configure printer; one input tray has "custom" format.
    - We create an OS user (es. CustRep);this user has a "default printer" that has input tray with "custom" format as default tray.
    - We create a new report server (es. CustRepSrv); this report server start as service with CustRep user credentials.
    - Every report (PDF format) generated and printed (destype=printer,desname="My Printer") with CustRepSrv report server get custom format as paper size and so fit with Custom tray definition on the printer.
    Can I do the same in report server 10G environment ??
    Thanks
    Andrea

    Using these and not hearing much bad
    Init Engine 1
    Max Engine 6
    Min Engine 0
    Eng Life 10
    MaxIdle 30
    Trace Error
    Trace Replace
    I set my Report Server Parameters
    CACHE SIZE - 700
    CACHE DIRECTORY = (you have to decide)
    IDLE timeout 120
    Max Connections 120
    Max Queue Size 4000
    trace options = trace_err
    trace mode trace_replace

  • Photosmart C410: How do I associate a custom paper size with the photo tray?

    Our Photosmart 3310 recently broke down and I purchased a C410 to replace it.  I sell a small item online that I ship in 3 5/8 x 6 1/2 envelopes.  With the 3310, I had figured out a way to print the envelopes from the photo tray.  While Word 2007 allows me to select the photo tray, the printer would not print from there until I created a custom paper size in the printer preferences dialog box.
    One of the reasons I got the C410 was for the photo tray.  It's a real pain to have to swap out the regular paper and stick in one evelope every time I want to print another envelope.  Well, unfortunately, that's what I've been doing.  I select the photo tray in Word, but the printer goes right ahead and prints from the main tray.  I had forgotten what I did to make it work on the 3310, so I experimented with that printer's drivers until I figured it out.
    My problem is that the software interface for the C410 is different than that for the 3310.  I can't figure out how to associate a custom paper size with the photo tray.  To test my theory this evening, I told Word that my envelope size was 5 x 7.  The printer didn't hesitate to take an envelope from the photo tray.  Of course the return address went into a dark void because the envelope is not 5 x 7.
    The difference between the two interfaces is that the 3310 has both printing shortcuts as well as "Print Task Quick Sets."  The C410 only has printing shortcuts.
    If anyone can help me, I'll be very grateful!  I've probably spent hours trying to get this figured out, and I have no idea what to do.

    Hi,
    Which Microsoft product (application) are you using ? Printer supports the following custom sizes:
    From ADF: Custom-sized media (ADF) between 127 to 216 mm wide and 241 to 305 mm long (5 to 8.5 inches wide and 9.5 to 12 inches long)
    From input tray: Custom-sized media between 76.2 to 216 mm wide and 101 to 762 mm long (3 to 8.5 inches wide and 4 to 30 inches long)
    You need to select right custom size from the application.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I print on a greeting card in landscape when I can't save custom paper size?

    I have a J6450 running on XP SP3 with the latest drivers and patches installed.  I have greeting card stock measuring 6.5 by 10.0 inches and a Microsoft Word document with a custom paper size matching the that stock prints in landscape mode.  The printer error is "Paper Mistmatch.  Paper size or type is incorrect."  I have followed the suggestions on the HP support page, changing the Print, Properties, Features options to show "Other greeting card", but can't define a custom paper size to match the stock.  The Save option is not available.  What do I need to do to make this work? 

    Here is a link to a HP document for adjusting several settings that may help with your issue.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01824353&tmp_task=solveCategory&cc=us&dlc=en&la...
    Dave M.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution.
    I am an HP employee.

Maybe you are looking for