OT: I'm in LA next month for Logic Class, first CA trip, what to do...?

Fellow Logic Users, esp those in LA,
I'm taking the advanced class offered by David Nahmani w/ Logic Pro Help on May 11th-13th, but I'll be in LA from the 10th -17th. I'm really trying to make the most out of my trip, especially since I've never been to California before, and won't likely be back for a long while.
I would love to sit in on a session sometime during my trip, or tour some nice studios in the LA area. I'm a young engineer (25) with a nice little project studio outside of Dallas trying to gain as much knowledge and experience as possible. I'll be staying with a friend who attends grad school at USC, so I should have some sort of transportation. I'm not sure of the best way to spend my limited time, but I figured someone out there (LA engineer, producer, studio owner), might be able to help me out. I really appreciate it guys, I'm looking forward to my trip and would love to meet some fellow engineers/ Logic users in LA.
-Ryan Miller

Try the la zoo (blah) then the griffith park observatory (I have not visited since the reopening, but it was awesome before.)
http://www.griffithobs.org/vshuttle.html
Now get some awesome thai for dinner at sanamluang.
http://noodlewhore.blogspot.com/2006/08/hungry-zombies-of-thai-town-sanamluang.h tml
You have to go to the beach. Point mugu is my favorite, but you can settle for leo carillo.
http://www.parks.ca.gov/?page_id=630
http://www.parks.ca.gov/?page_id=616
"Point Mugu State Park, located in the Santa Monica Mountains, features five miles of ocean shoreline, with rocky bluffs, sandy beaches, sand dunes, rugged hills and uplands, two major river canyons and wide grassy valleys dotted with sycamores, oaks and a few native walnuts. There are more than 70 miles of hiking trails. The beach also features swimming, body surfing and surf fishing. The park includes the jagged pinnacles of the Boney Mountains State Wilderness Area."
"Welcome to Griffith Observatory, a beloved icon of Los Angeles and world leader in public astronomy. Since 1935, the Observatory has given tens of millions of visitors the opportunity to become observers. Griffith Observatory offers exciting shows in the Samuel Oschin Planetarium, public telescopes, and observing and astronomy exhibits."

Similar Messages

If I buy OSX Lion now can I get Mountain Lion later next month for free?

Any idea?

Grayson.Iceman wrote:
If I buy OSX Lion now can I get Mountain Lion later next month for free?
Only on a new Mac.
In simple terms, you either need:
A qualifying 10.7 Mac purchased on June 11, 2012 to 10.8's release date, then you have 30 days afterwards to upgrade to 10.8 for free.
Bought a qualifying new 10.7 Mac on or after the 10.8 release date which you then have 30 days to request a free 10.8 upgrade.

Problem with next month for DateNavigator in DynPage

Hi
I have a problem with using the DateNavigator in DynPage.
I can not navigate to the previous/next month by using the event onNavigate();
The following is my code
    public void doProcessBeforeOutput() throws PageException {
       IPageContext pagecontext = this.getPageContext();
       Form form = this.getForm();
       DateNavigator dn = new DateNavigator(pagecontext);
       dn.setId("myDateNavigator1");
       dn.setMonthsPerColumn(1);
       dn.setMonthsPerRow(1);
       dn.setCenteredMonth(3);
       dn.setOnNavigate("myOnNavigate");
       form.addComponent(dn);
     public void onMyOnNavigate(Event event){
          DateNavigatorNavigationEvent nvEvent = (DateNavigatorNavigationEvent) event;
          DateNavigator dn = (DateNavigator)this.getComponentByName(nvEvent.getComponentName());
          if ("next".equals(nvEvent.getDirection())){
               dn.setCenteredMonth(4);
          if ("previous".equals(nvEvent.getDirection())){
               dn.setCenteredMonth(2);
Does anybody know what is the problem with it? Or konw how to control the navigation?
Thank you for help.
Best Regards
Zhou

Hi
I have a problem with using the DateNavigator in DynPage.
I can not navigate to the previous/next month by using the event onNavigate();
The following is my code
    public void doProcessBeforeOutput() throws PageException {
       IPageContext pagecontext = this.getPageContext();
       Form form = this.getForm();
       DateNavigator dn = new DateNavigator(pagecontext);
       dn.setId("myDateNavigator1");
       dn.setMonthsPerColumn(1);
       dn.setMonthsPerRow(1);
       dn.setCenteredMonth(3);
       dn.setOnNavigate("myOnNavigate");
       form.addComponent(dn);
     public void onMyOnNavigate(Event event){
          DateNavigatorNavigationEvent nvEvent = (DateNavigatorNavigationEvent) event;
          DateNavigator dn = (DateNavigator)this.getComponentByName(nvEvent.getComponentName());
          if ("next".equals(nvEvent.getDirection())){
               dn.setCenteredMonth(4);
          if ("previous".equals(nvEvent.getDirection())){
               dn.setCenteredMonth(2);
Does anybody know what is the problem with it? Or konw how to control the navigation?
Thank you for help.
Best Regards
Zhou

Calculating next month for December month

Hi,
I am able to get the value for a measures in which one measure calculates value for month selected through prompt and another measure calculates values based on next month.
So I have restriced measure 1 like this in where condition
MONTH_V.MONTH_IN_YEAR_NUM=@Prompt('2. Month :','A','Prompt\Month',Mono,Constrained)
Second measure I have restricted like this
MONTH_V.MONTH_IN_YEAR_NUM=(to_number(Substr(@Prompt('2. Month :','A','Prompt\Month',Mono,Constrained),1,2))+1)
This works perfectly alright.
I have prompt for year also. So when I select December - 08 then the calculation goes wrong, since MONTH_IN_YEAR_NUM=13 and there is no corresponding record for 13.
So my question here is can I use CASE statement for this.
MONTH_V.MONTH_IN_YEAR_NUM=
(CASE WHEN (to_number(Substr(@Prompt('2. Month :','A','Prompt\Month',Mono,Constrained),1,2))<>12 THEN
(to_number(Substr(@Prompt('2. Month :','A','Prompt\Month',Mono,Constrained),1,2))+1)
ELSE 1
AND
MONTH_V.MONTH_YEAR=
CASE WHEN (to_number(Substr(@Prompt('2. Month :','A','Prompt\Month',Mono,Constrained),1,2))<>12 THEN
(@Prompt('3. Year :','N','Prompt\Year', mono ,constrained)
ELSE
(to_number(@Prompt('3. Year :','N','Prompt\Year', mono ,constrained)+1)

Hi,
Create 2 condition objects with prompt in universe. one for current month and another for next month from current month.
In report take data from 2 data providers. One for current month and one for next month and apply the corresponding conditions and also take the corresponding measures.
Hope this will help you.
Regards,
Rakesh K

Any way to for a class instance to ask what its instance name is?

Hey. I have a class which needs to create a movie clip on the
stage. Since each instance of the class will only ever have 1 movie
clip on the stage at a time, it seems reasonable that I have the
instance create a movie clip with its own name, prefixed with "mc_"
or something of the sort.
Here's where I don't know quite what to do... How do I get at
this information? For instance, when you a dealing with an XMLNode,
you can simply use...
the_answer = xmlNodeInstance.nodeName;
...I know the analogy fails, but hopefully you know what I'm
looking for.
Thanks!

hu....
and when you create your movie clip, (assuming you don't just
build it at authoring time) you specify an instance id through the
createEmptyMovieClip function....
taking a cue from this, I'm guessing that my answer is to
change the structure of what I'm doing a little... instantiate my
object with an instance name as a parameter given to the Class
Constructor... that way the class can have it's own name on file.
I guess my only concern there is how do I keep the "name"
variable from being just completely arbitrary...?
I guess I'm getting away from application (becaust I don't
know when I'd do this...) and into theory.... but for instance,
let's say I create my class like this:
var instanceReference:mySuperCoolClass = new
mySuperCoolClass("instanceName");
So. I have my class instance... ideally, the class would
exist on the stage as "instanceName", with "instanceReference"
being another way to reference the instance. That would be ideal...
but how do I make that happen? Because in the scenario of what I've
just done, I see the class instance existing on the stage as
"instanceReference", and I've just passed it a fun, but meaningless
bit of data called "instanceName"...
I suppose I could have the class go back to "_parent" and
create it's own object.... but here again I'm getting into
territory that feels a lot like i have no idea what I'm doing...
haha!
I guess I have enough info to get back to coding for now...
But I'm deffinately open to more tips... I feel like I'm still
missing how a lot of this works.
(I'm at that awkward place where I can easily explain what
OOP is, but I'm far from experienced in how to implement it... I've
only written about half a dozen classes so far... so I still have a
lot to learn. Thanks for your patience, all of you!)

Ipad 2 locked for the the first time now what

i can not unlock my ipad 2....HELP.....!!!!!!

FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...

How to keep showing items created in current month for 5more days only in the next month by OOB functionality only

Hi,
I have a Time Reporting site where users log in their time twice a month.This site uses only Out Of Box functionality. There is no scope for coding in my site.
In the list i have created a view which shows the Time Report of the user logged in for the current month only.
There is a new requirement : Current month's Time Report should be visible to the users in the next month for 5 starting days of the month only so that users can edit this month's Time Report in the next month's 1st 5days incase they forget to edit it in
the current month.
e.g: If i am absent on the last day of the month , my time report for this month(March) should be visible for 5 days in April so that i can stiil edit March's time report. However after 5days the Time Report for March should not be visible. After 5days only
April's time report will be visible when submitted(April's time report).
Please can anybody help me out with this.
Regards ,
Guru

Hi Guru, you have a couple of options: 1) set a retention schedule through the list's settings> Information Management Policy Settings. Where the start date < start date + 35.
2) create a view and filter by the date like above.
These aren't perfect scenarios, but will get you close to what you want.
cameron rautmann

How to control the depreciation for revaluation from next month ?

Dear all,
I post current year ord. depreciation revaluation via trx. ABAW (Bal. Sheet Revaluation), and the general ledger will be updated after depreciation run.
In our client, the scenario is AFAB (dep run) --> ABAW (revaluation) --> AFAB (dep repeat run).
Now my problem is I want the revaluation value be depreciated next month and the second AFAB just for general ledger posting. I have set the period control '11'(next month) for revaluation but it doesn't work, the second AFAB still generates both G/L and depreciation posting.
How can I control the revaluation depreciation from next month?
Thanks for your help.

Hi,
we have used a different approach. We run two separate depreciation areas:
01 - ordinary depreciation
03 - revaluation
We maintain two complete streams of data. 01 is linked to the original acquisition value of the asset and depreciates normally.
03 is linked to the revaluation. Each month we recalculate the replacement value, revalue the accumulated depreciation and then run depreciation using transaction AFAB.
I don't think it will work in the way you described.
Kind regards,
Rudolf

HT6413 Please stop charging for iCloud from next month.

Please stop charging for iCloud from next month.

For details of downgrading please see:
http://support.apple.com/kb/ht4874
and scroll down to 'Downgrade your iCloud storage plan' for instructions for OSX, iOS, and Windows.

What is the difference between the plan i currently have now and the 9.99 a month for both photoshop and lightroom?

I currently am paying 29 dollars a month for just photoshop.. there is an option for 9.99 a month for both that and lightroom? what is the difference?

This document explains the differences between the Creative Cloud Photography Plan and the Photoshop single app plan - https://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
Thanks
Bev

Scheduling agreement delivery schedule not continue for a next month.

Hi.!
What are the setting I have to maintain so that delivery schedules are transmitted OR used for particular month not beyond that.(means not required to continue for next month.)
Thanks and regards,
Prashant

Hi,
You can limit the validity to date (e.g. 31.12.2008) you want in "Source list" via t-code ME01, then after 01.01.2009 system will generate the planned orders instead of the schedule lines in SA.
Regards
Tao

MDX to fetch record from 1st of current month to 5th of next month and same for previous year

In my date dimension I have a attribute CalendarDate. I do have a hierarchy [Date].[Year].[Quarter].[Month].[CalendarDate] as well. I need to fetch data starting from 1st working day of current month to 5th working day of next month by MDX. I do have a attribute
to filter working day as IsWorkingDay. How can we get a dynamic MDX that will find the current month first and than it will filter the record from 1st working day of current month to 5th working day of next month. And same for the previous year same month
to compare.
Thanks in advance!
Palash

Hi P,
You can use a calculated member to dynamically add all the days in the current month and the first 5 in the following month. You will need to change measure, cube and hierarchy names.
with member measures.ThisMonthAnd5 as
sum([Date].[Year].parent.children,Measures.[Sales])
+sum(Head([Date].[Year].parent.nextmember.children,5),Measures.[Sales])
select
{Measures.[Sales]
,Measures.ThisMonthAnd5
} on 0,
non empty [Date].[Year].[CalendarDate]
on 1
from MyCube
Richard

Hi,i just bought the Creative cloud membership and i would want to know why is t one year policy and you payed alot of money and still pay for the next month? Annual means yearly right ? why do i have to pay another next month.

Hi i just want to know i bought the creative cloud and photoshop and premiere. All those and it said annual meaning i have to pay for the next year right? But why did it said that i have to pay for the next month? What happens when i didn't pay the next month ?

You may buy an annual subscription and pay monthly, or a straight monthly subscription... and, being a subscription, if you stop paying the software stops working
If you want a one time payment, and you can use 3+ year old software, go to Creative Suite 6

In flex charts the label for next month get dropped

I found for DatatTimeAxis if you set disabledRanges to the last date of the month the label for next month gets dropped using property labelUnits='months". Any ideas? Below is the code:
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
     <mx:Script>
          <![CDATA[
               import mx.collections.ArrayCollection;
               [Bindable]
               public var stockDataAC:ArrayCollection=new ArrayCollection([{date: "2005, 6, 1",
                         close: 30}, {date: "2005, 7, 31", close: 25}, {date: "2005, 8, 3",
                         close: 40}, {date: "2005, 9, 4", close: 30}, {date: "2005, 10, 5",
                         close: 50}, {date: "2005, 11, 6", close: 43}]);
               private var d:Date=new Date("7/31/2005");
               [Bindable]
               private var offDays:Array=[d];
               public function myParseFunction(s:String):Date
                    // Get an array of Strings from the comma-separated String passed in.
                    var a:Array=s.split(",");
                    // Create the new Date object. Subtract one from
                    // the month property because months are zero-based in
                    // the Date constructor.
                    var newDate:Date=new Date(a[0], a[1] - 1, a[2]);
                    return newDate;
          ]]>
     </mx:Script>
     <mx:Panel title="DateTimeAxis Example"
                 height="100%"
                 width="100%">
          <mx:LineChart id="mychart"
                           height="100%"
                           width="100%"
                           paddingRight="5"
                           paddingLeft="5"
                           showDataTips="true"
                           dataProvider="{stockDataAC}">
               <mx:horizontalAxis>
                    <mx:DateTimeAxis dataUnits="days"
                                         parseFunction="myParseFunction"
                                         disabledRanges="{offDays}"
                                         labelUnits="months"/>
               </mx:horizontalAxis>
               <mx:verticalAxis>
                    <mx:LinearAxis baseAtZero="false"/>
               </mx:verticalAxis>
               <mx:series>
                    <mx:LineSeries yField="close"
                                      xField="date"
                                      displayName="AAPL"/>
               </mx:series>
          </mx:LineChart>
     </mx:Panel>
</mx:Application>

I found your posted code to be messed up. I fixed it and could not see your problem.
Here is the fixed code.
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
     <mx:Script>
          <![CDATA[
               import mx.collections.ArrayCollection;
               [Bindable]
               public var stockDataAC:ArrayCollection=new ArrayCollection([
                 {date: "2005, 6, 1", close: 30},
                 {date: "2005, 7, 31", close: 25},
                 {date: "2005, 8, 3", close: 40},
                 {date: "2005, 9, 4", close: 30},
                 {date: "2005, 10, 5", close: 50},
                 {date: "2005, 11, 6", close: 43}]);
               private var d:Date=new Date(2005,8,31);
               [Bindable]
               private var offDays:Array=[d];
               public function myParseFunction(s:String):Date
                    // Get an array of Strings from the comma-separated String passed in.
                    var a:Array=s.split(",");
                    // Create the new Date object. Subtract one from
                    // the month property because months are zero-based in
                    // the Date constructor.
                    var newDate:Date=new Date(a[0], a[1] - 1, a[2]);
                    return newDate;
          ]]>
     </mx:Script>
     <mx:Panel title="DateTimeAxis Example"
                 height="100%"
                 width="100%">
          <mx:LineChart id="mychart"
                           height="100%"
                           width="100%"
                           paddingRight="5"
                           paddingLeft="5"
                           showDataTips="true"
                           dataProvider="{stockDataAC}">
               <mx:horizontalAxis>
                    <mx:DateTimeAxis dataUnits="days"
                                         parseFunction="myParseFunction"
                                         disabledRanges="{offDays}"
                                         labelUnits="months"/>
               </mx:horizontalAxis>
               <mx:verticalAxis>
                    <mx:LinearAxis baseAtZero="false"/>
               </mx:verticalAxis>
               <mx:series>
                    <mx:LineSeries yField="close"
                                      xField="date"
                                      displayName="AAPL"/>
               </mx:series>
          </mx:LineChart>
     </mx:Panel>
</mx:Application>
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

Selection variable for next month in RFPERIOD_OPEN in closing cockpit

Hi,
we would like to use RFPERIOD_OPEN in the closing cockpit in order to open the next period on D-10 automatically. I would like to use the selection variables of the closing cockpit in the program variant in order to avoid unnecessary variant maintenance every month.
Unfortunately I cannot find a variable for the next month. There is only SAP_FAST_CLOSE_PERIOD_P. Do you know if it is possible to base a calculation logic to derive the next period from SAP_FAST_CLOSE_PERIOD_P.
Thanks!
Kind regards,
Mariya

Thanks! I checked it, but the appearance of months and order is okay in T247.
Any other ideas?
I thought I read somewhere that this is a bug but can´t remember where I found that bug hint.

OT: I'm in LA next month for Logic Class, first CA trip, what to do...?

Similar Messages

Maybe you are looking for