OT: Saber que tipografias dispone cada programa de Microsoft

Acaba de encontrar este link y es muy interesante:
http://www.microsoft.com/typography/fonts/default.aspx

Interesante
Lucas Sevilla escribió:
> Acaba de encontrar este link y es muy interesante:
>
>
http://www.microsoft.com/typography/fonts/default.aspx
>
>

Similar Messages

How do I find the BIOS settings? I'm trying to install a VM so I can run CAD programs for my work.

I am an engineering student and thus having the capability to utilize CAD programs is highly advantageous to me, so I talked to several of my friends who have Macbooks and they recommended using Parallel. After I installed the program and my Windows OS, it keeps giving me an error message saying that the hardware virtualization has been disabled in the BIOS settings. I cannot find the BIOS settings anywhere! How do I change this? Does anyone know?

There are no BIOS settings, because Macs don't have a BIOS. I don't use Parallels, but I assume it has simulated BIOS settings. You'd have to consult its documentation to find out how to change them.

I down loaded new OS X (Lion)operating system and discovered my CAD programs no longer run. Is it possible to reload the original OS X and remove Lion?

I down loaded new OS X (Lion)operating system and discovered my CAD programs no longer run. Is it possible to reload the original OS X and remove Lion?

If you backed up before the upgrade, restore the backup.
If not you are going to have to erease the disk and install the older OS.
You should back up any data you want before so that it can be restored afterwards.
Is there a version of you CAD program that is Lion compatable? That would be an easier solution.
Allan

Exporting DXF with Coordinates Illustrator to CAD program

Hi,
I often have to export graphics from Illustrator CS5 for use in Catia or Pro Engineer.
Usually, if it's a graphic I have made myself, all I do is drag the 0,0 on my rulers to the position on the artwork where I require the coordinate system to be placed in the DXF file and that's fine.
However, recently I have received files from other sources which need to be converted from a PDF to a DXF for use in my CAD programs and I am having difficulty relocating the coordinate system to the desired location.
For instance, if I convert the PDF to DXF without moving my 0,0 location on my rulers, sometimes the coordinate system is top left or bottom left of the artboard the PDF has been imported into Illy on. (It varies file to file). So I figured that if I move the 0,0 location of my rulers to where I want the coordinate system to appear, that should work because it usually does so in artwork I create. But it always gets overwritten. The only way I can counter this is to assume that the coordinate system is bang-on the corner of the artboard and move all my artwork to the corner and then convert the file to DXF.
I guess my question is, for those of you who have a similar task to do, is this the only way I can relocate the coordinate system (by moving the artwork to the corner, which seems a bit dodgy cos it's all on assumption) or is there a more accurate way to do so.
Thanks in advance.
Sonya

I o not know if that is the only way but I will point out the reason you might be seeing 0,0 either at the to left or lower left is that in Cs 5 it has been change to the top left i CS 4 and earlier it was the bottom left, so depending on what version it was created from it might change this for you as well a way of changing this for you is to ask from them to save the file as an ai fie first in a version that is CS or earlier than make that a pdf.
Or what might be easier is to live with it until everyone changes to CS 5 or later?
Or make it a symbol and use the orientation proxy in the symbols options to select the orientation you desire.

Fixing CAD Program Paths

I'm often asked to edit drawings that were created in engineering CAD programs. I keep running into the same problem where Illustrator can't fill a closed path completely, and I can't find a workaround yet for this.
Let's say I have a closed path of a basic shape, with rounded corners. (Well, I assume it's a closed path. It sure looks like it to me.) If I select this shape and fill with black, only the corners are filled black. The rest of the shape remains white.
I'm looking for a command in Illustrator CS3 that will correct this path, so the shape will fill entirely with black.
Can anyone comment on this, or offer a fix?
I've asked the engineering guys to look into their Export or Save As settings on their end, but there doesn't seem to be anything. I have been receiving .AI files and also AutoCAD .DXF format files, if this is of any help. I also understand some of these files are drawn in SoftWorks.
Thanks in advance for any potential help in fixing these simple paths.

i've had to bring lots of cad files into illustrator and that's always a drag and non of the solutions are quick.
you can use the plug in Concatenate to join segmented paths - this will require you to do one object at a time for clean results. you can do a whole document but you might end up with multiple merged objects etc. it's also not always clean, depending on your object you might end up with multiple lines on top of each other. but in general it helps a lot.
one helpful thing to do before using it is to get rid of anchor points before joining.
another way i've been working around this is by using the Live Paint. select the lines enclosing the shape you need and paint fill it.

Eps vs ai when rendering in CAD program

Hello, I'm using a CAD program, Solidworks 2010 if it helps, to create and render 3D artwork for my forum. In Ai, I'd like to import an eps or ai file with both wireframe and artwork. So far I have only been able to import the wireframe which Ai apparently renders as paths. Through trial and error, 3D pdf and dwf files won't render my artwork along with ai and eps files. I'd like to retain 3D assets when impoting to Ai.
I have been searching how exactly Ai renders vectors from CAD programs, I'm still looking. If anyon has had the same issue or has done this before, I could really use some assistance, thanks.
Regards,
TheSno0py

AI does not have a 3D stage that you can do composite and does notsupport any of the 3D model formats so it will not be possible you can only import a specific view of a 3D model as 2D paths.
You can import 3D Model into Photoshop whcih you can then paint and map art to and do some limited editing and animation.
You can bring it into After Effects which has a 3D space and so does Flash but yiu will be limited in what you can do.
The 3D support you ask for is an old feature request that I have mad many times, we have the 3D effect but that cannot be export as a 3D model and the perspective tool.

Hobby CAD program recommendation? Where is spread sheet on iMac

Hello
Originally I was replying to J.C. in another thread about software. The question was answered with a star so not sure if J.C. or other question answering types will look at it so I am requizing here.
Sorry this is a bit stream of couciosness but my basic question is: what app has drawing capability freehand and CAD, desk top publishing enough to take notes and add pictures and can calc with a spreadsheet.
The following is how I arrived at the above question.
Is there a basic spread sheet that came with my 2007 17' iMac? I just use the one on my old computer. Looking through the apps I just see a demo of Office. Back in the day I purchased Wings for my Mac SE to have a spread sheet (didn't come with an s sheet).
Any recommendations on a desktop publishing app with drawing capability that integrates with above spreadsheet? I use it for taking notes and designing things for hobby. Metal working, furniture, etc.
I have Publishit Easy on Mac SE. I was writing employee manuals back then. Then my life took other turns and now I am back as if dropped from the past into the future. Help!
Back then 1989 when I was shopping for a computer, at the Mac store I said I wanted one I could upgrade to be able to use a basic cad program. Rather than educate me they just laughed. I bought else where. They called the store microage I fondly remember them as stoneage. They are out of business. No wonder.
Within a few years my friend was using a cad program on his laptop. Stoneage had no vision.
Perhaps I want a Cad program now. Still need to integrate/do the above with it. Should I enter this as a question in another forum here?
I assume any cad I would get now would be a bit over the top for what little I want to do (no cam use).
sincerely
Barkingmad

There is Office for Mac but you will have to purchase it and dump the trial that came on your Mac as it will expire after 30 days. Office comes with Word, PowerPoint, Excel, and Entourage(email client). Excel does spread sheets, PowerPoint does presentations and Word creates documents. You could also get iWork for your Mac which are Apple's version of Word, PP, and Excel.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?nnmm=br owse&mco=8006AFCD&node=home/mac/campaigns/msoffice_2008landing
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=A8E E25ED&fnode=home/shop_mac/software/apple&nplm=MA790Z/A
I'm not too familiar with CAD applications for Mac so you'll have to do a little research unless someone else can chime in. I just typed in Google "CAD for Mac". When you find one that looks good then go back to Google, type in it's name and look for some reviews.
http://www.apple.com/downloads/macosx/imaging_3d/domuscad.html
http://www.turbocad.com/TurboCAD/TurboCADforMac/TurboCADMacProv3/tabid/586/Defau lt.aspx?gclid=CPLH5aGxiJECFSBeagod6laaFQ
George

Is there a forum for discussing basic cad programs

I used to use a basic cad program called floorplan(on windows). As it was an 8 bit version it stopped working on windows 7 so I ended up with the old PC set up just to use that.
Having become an Apple convert I want to get rid of all the old Microsoft stuff but want a basic uncomplicated program which lets me do basic floor plans as well as the occasional 2D drawing for building projects. this means I want to be able to see the angle the line is being drawn at, the length of the line etc.
there are plenty of programs out there but how do I test them without wasting money on ones that are either to complicated for my needs or to simple to do what I need?

No, and there won't be until the final version of it comes out.
(125309)

Dejo de funcionar la pantalla de mi Itouch, alguien sabe que puedo hacer?

Dejo de funcionar la pantalla de mi Itouch, alguien sabe que puedo hacer? o a donde lo puedo llevar?

Bienvenido a la comunidad de Apple.
Asegúrese de que no son sólo los compran de nuevo. Si ves una película de nuevo, usted debe mirar en la ficha comprado en la sección de cine.
Si usted todavía piensa que ha sido acusado incorrectamente, seleccione el contenido que está causando un problema y utilizar el 'Informar de un problema "botón en su historial de compras en el equipo.
En la actualidad, si su compra pasa a ser la compra más reciente que usted no va a ser redirigido al formulario de memoria, en este caso utilizar el informe de un problema opción de la factura que se enviará por correo electrónico.

Buenas mi iphone 5s dejo de cargar sale como que carga pero no carga en vez de que suba la carga se disminuye la carga no se que hacer quisiera saber que podria tener es como que carga pero falsamente he probado con varios cargadores originales y nada

Buenas mi iphone 5s dejo de cargar sale como que carga pero no carga en vez de que suba la carga se disminuye la carga no se que hacer quisiera saber que podria tener es como que carga pero falsamente he probado con varios cargadores originales y nada

Me sucede igual, se me descargo totalmete y se apago y ahora ya no carga, no aparece ni el simbolo de q se conecte el cable, cambie la bateria y no tengo ningu resultado, me dicen q puede ser el pin de carga, pero una vez cargado al 25%(porque era bateria nueva) si carga, ahora no puedo dejar q se descargue totalmente sino ya no se carga, mi iphone es el 5s, alguien puede ayudarme...?
Me han dicho q son varios los telefonos q han salido asi y q es problema de fabrica, alguien q me ayude

Parece que por error cambie una letra en mi contraseña y ahorita que se puso el protector no puedo ingresar, alguien sabe que hacer

parece que por error cambie una letra en mi contraseña y ahorita que se puso el protector no puedo ingresar, alguien sabe que hacer

Tengo exactamente el mismo error. Alguien sabe que esta pasando?

Mi iphone 4s prende y se apaga solo y cuando introduzco el codigo, no se activa Alguien sabe que sucede?

mi iphone 4s prende y se apaga solo y cuando introduzco el codigo, no se activa Alguien sabe que sucede?

Only english here

Mi iphone 4 solo funciona cuando lo conecto al ordenador, al desconectarlo se me apaga, alguna forma de saber que le pasa?? con el cargador tampoco funciona, lo he restaurado y hecho de todo y sigue igual.

mi iphone 4 solo funciona cuando lo conecto al ordenador, al desconectarlo se me apaga, alguna forma de saber que le pasa?? con el cargador tampoco funciona, lo he restaurado y hecho de todo y sigue igual.
Alguna solucion??

Reemplazar la pila.
Apple - Batteries - Battery Replacement

Como saber que usuario es el que esta conectado en la sesión actual de Sap

Hola:
Existe una manera de saber que usuario es el que está conectado en la sesión actual de Sap. Lo necesito para un reporte en Query Manager o Crystal Report que muestre las facturas de un período para el vendedor que esté conectado en la sesión actual.
Hay alguien que tenga una idea de esto ?
Mariela Gómez
Consultor Sap Business One

Hola...
Efectivamente, al hacer la revisión del mismo, posee los campos, más no trae información alguna. Esto supongo que se debe a algún conflicto que se genera con la sentencia
$[USER].
Prueba con este query:
DECLARE @USUARIO INT
SET @USUARIO = (SELECT $[USER])
SELECT T0.[DocNum], T0.[DocDate], T0.[DocDueDate], T0.[CardCode], T0.[CardName] FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry WHERE T0.[UserSign] = @USUARIO and T0.[UserSign] = [%0]
, luego al grabar como informe, podrás ver que al darle vista preliminar, aparecerá la variable de entrada...si ingresas un usuario distinto del conectado, no traerá datos. Por el contrario, si ingresas el número del usuario conectado, te traerá los datos requeridos en el informe.
Espero te sea de ayuda,
Saludos Cordiales,

Como puedo saber que modelo de iphone tengo

buenas dondfe o como consigo saber que modelo de iphon tengo (nose si es 3g o 4g, etc

Hola a todos!!!
A mi parecer creo que la longitud de la curva viene dada por el tamaño absoluto, como un ejercicio tome una circunferencia de 10 cms de diametro, la formula basica de calcular la longitud de una circunferencia es el diametro por π (3.1416) y eso me dio 31.416, lo mismo que me da en la longitud total del panel de Info del AI. Ahora bien para curvas más complejas estoy seguro que AI. maneja integrales avanzados para el calculo de esta curva, recordemos que las lineas berzier son formulas matematicas, y es casi seguro que esos integrales se apliquen en el calculo de la longitud de la curva!
Suerte!

OT: Saber que tipografias dispone cada programa de Microsoft

Similar Messages

Maybe you are looking for