OTA 6.1 for iphone 4 error

Tried to do an OTA to 6.1 and phone just keeps slowly flashing apple logo

I have no warrenty or Apple care. Would they charge me for anything they do the phone? Plus I cannot get passed the "charging" symbol. It has 100% battery but displays that it has 0% battery... This shouldn't happen the Apple products, I have had quite a good experience with their products but this is a joke now. I mgiht just wait until August for my upgrade, thank you anyway.

Similar Messages

VCS Expressway event log errors when Jabber for iPhone and Windows log in

hi folks,
I've deployed Collaboration Edge with VCS Control and Expressway:
my Jabber for iPhone succesfully can log in from Internet and it can IM but not calls and I see next messages in VCS Expressway when Jabber is logging in:
2015-03-27T18:00:28+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49543" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 16:00:28,204"
2015-03-27T17:58:55+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49535" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:55,786"
2015-03-27T17:58:32+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49527" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:32,202"
2015-03-27T17:58:08+02:00
tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49512" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 15:58:08,582"
"Digest User" in the "Protocol Specific Information" section of Phone Configuration selected right user. in this Jabber I see following error "Failed to get device configuration". however Jabber for Windows and for Android hasn't such issues - they succesfully can log in from Internet and it can do calls and IM but I see next messages in VCS Expressway when Jabber is logging in. The same log line appears when Jabber for Android log in:
tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="56751" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 14:19:11,769"
and I can't find any information which describe such types of error.
thanks!

Thanks Srini, but the instructions have two options:
1. Use the Control Panel, select "Oracle 11g..." and uninstall from there.
This is of course the first thing I tried, but as I said, there is no entry for Oracle 11g in my "Programs and Features" applet.
2. Download the install package and run OracleXE.exe with the remove iss file.
Firstly, there is no OracleXE.exe in the package I downloaded, just setup.exe;
Secondly, setup.exe ignores the iss parameter and tells me that OracleXE is already installed (setup.log contains ResultCode=-3) so it can't be installed.
Is there somewhere else to get an OracleXE.exe that will work for 11g? Or are these the instructions for 10g and haven't been updated yet?
Am I unusual in not having a Control Panel entry?
(and I understand this is a beta - that's partly why I'd like to uninstall it - I'll go back to 10g and not be so impatient :))
Regards,
Andrew

I am having an iphone 4 and it is not working. i am trying to restore it on itunes directly but it stays at waiting for iphone status with no errors and the iphone goes into a mode where it keeps restarting continuously with apple logo on the screen

the iphone goes from recovery mode to some other mode where it keeps restarting with apple logo flashing on the screen continuously. and there is no error in itunes at all which stays in "waiting for iphone" status

Hi there yaswanthfromcumbum,
You may find the troubleshooting steps in the article below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
-Griff W.

Previously posted troubleshooting doesn't work for my error message "iTunes could not back up the iPhone because an error occurred". What other options do I have?

Previously posted troubleshooting doesn't work for my error message "iTunes could not back up the iPhone because an error occured". What other options do I have to backup my iPhone data properly?

Hi there kchagape,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
-Griff W.

Random selections of mp4 videos won't sync, convert for iPhone option in iTunes comes up with unknown error 2002, help please!

I've been having massive issues copying mp4 video files onto my iPhone 4 from my windows 7 (64 bit) pc.
I converted a large number of avi files into mp4 using aiseesoft movie converter and most of them work just fine.
However about a quarter of the files with no Obvious difference in size and converted the same way will not sync.
Instead a message appears saying these cannot be played on the iPhone.
Also when then trying to use the iTunes convert for iPhone function It fails for unknown error 2002.
Any help on why this is happening and how to stop it would be greatly appreciated.
Thanks

When the videos are in the Movie library, try using the Create IPod and iPhone Version in the Afvanced tab of iTunes.

Am trying to update to 5.0 from 4.2.1 and keep getting an error message "There was a problem downloading for iphone. The network timed out. What do I do ?

Am trying to update to 5.0 from 4.2.1 and keep getting an error message "There was a problem downloading for iphone. The network timed out. What do I do ?

This is asked and answered many times each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again.

How To Fix "This accessory is not optimized for this iPhone" Error?

How To Fix "This accessory is not optimized for this iPhone” Error?

Clean the iPhone dock port with a clean dry tooth brush. If the warning occurs again, clean the dock port very carefully and thoroughly with isopropyll alcohol, especially the pins which are on top of the dock mid rib. If still warning, then take iPhone to Apple for Warranty service.

Error message saying iTunes doesn't include software for iPhone

I get an error message saying iTunes doesn't include the software for iPhone. It says to uninstall and re-install iTunes. I have done it twice and both times I get the same error.

There is an entire iPhone forum here
http://discussions.apple.com/category.jspa?categoryID=201
I don't have one - perhaps you will be better off there, where most will?
Best of luck!

I can't get me Ipod on my Iphone4 to play, it will until an error comes up saying this device is not optimised for iphone, with nothing plugged into it.

My Ipod on my Iphone wont play and I have no volume bar. I can hear when the phone rings and I can hear people talking when they call, it seems to be a software promlem that I dont know how to fix. I have been having this problem and I have realized that when the error comes that this accessory is not optimised for iphone, my Ipod wont work. I have never had the air play button and my software is the current editon.

Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

HT201442 What is error 3194 for Iphone? How to fix it

What is error 3194 for Iphone 3GS? How to fix it?

This usually occurs if your iTunes vesion is out of date, when your device has been hacked in attempt to downgrade the iOS or you used hacking software such as tinyumbrella that altered you computer hosts file.
See this:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'

'Waiting for iPhone...' and '1604' Error Message

I have an iPhone 3GS which I bought in July 2009. I never had to reboot, recover, reset it or what so ever and it works fine!
Last Friday I downloaded the latest iTunes (9) and the latest software for the iPhone (3.1.3?) and installed both succesfully.
But when I synced the iPhone with my computer, it freezed halfway. It didn't respond anymore, so I was forced to manually remove the usb-cable. Then I had to restore the iPhone, but when my computer says: 'Waiting for iPhone', my iPhone doesn't respond.
After trying everything imaginable, I went to the Apple Store today and they got a '1604'-error and said that it had something to do with my USB connection. But they didn't give me a solution.
Every other device with the same cable works fine. My iPhone with a different cable, doesn't work.
Can anybody help me?

Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
1. Connect iPhone to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
2. Restore and wait for error 1604.
3. When prompted click OK.
4. Close and re-open iTunes while iPhone remains connected.
5. iPhone should now be recognized in Recovery Mode again.
6. Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Recovery Mode:
http://support.apple.com/kb/HT1808
Also, look here:
http://support.apple.com/kb/TS1538

I am trying to restore my iphone 4 and when it gets to the, waiting for iphone, stage he phone does not respond and it comes up with error 4005. does anyone know how to resolve this issue. thanks

I am trying to resore my iphone 4 and the phone keeps causing an error 4005. i have updated itunes and am at a loss as how to restore phone. please help

Hello there, Shaz18663.
The following Knowledge Base article provides a solution for the error you have mentioned:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Particularly:
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Error 4013 for iphone 4S when upload ios 7.0.2

Hi,
Not yet receive your support for error 4013.
Please help asap.
Thank you so much.

This could be caused by several different things. While restoring your phone at what point does it pop up with this error message? Does it say waiting for iphone then hangs on then message appears? Need more details

I want to authorize my computer on itunes for iphone and itunes tells me: An unknown error occurred (-50)

I want to authorize my computer on itunes for iphone and itunes tells me: An unknown error occurred (-50)

Try Here > http://support.apple.com/kb/TS1583
And See this Discussion...
https://discussions.apple.com/thread/4204776?start=0&tstart=0

When trying to download 4.3.3 for iphone 4 with firewall off and antivirus off but i keep on getting the error code 3259 - sometimes it times out after a few seconds other times it will be half anhour - can anyone help?

Hi,
When trying to download 4.3.3 for iphone 4 with firewall off and antivirus off i keep on getting the error code 3259 - sometimes it times out after a few seconds other times it will be half an hour - can anyone help?
Thanks

Before beginning the download, try temporarily disabling the antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required and is running with that secure OS.

OTA 6.1 for iphone 4 error

Similar Messages

Maybe you are looking for