OTA updates from AT&T

On my Treo 650, AT&T would ocassionally send over-the-air (OTA) updates to the phone, and suggested the phone be turned off and on once in a while to receive these updates. Anybody know/hear of anything similar for the iPhone? I assume its AT&T network related stuff on the SIM card, nothing to do with updates to the iPhone OS.

Interesting. Any iPhone update will come in the form of an Apple/iTunes update and not over the air.
The OTA updates were probably smartphone specific features and not service. I had Cingular and never had those type of updates on my RAZR V3.

Similar Messages

  • No Service on iphone 4 GSM after update from ios 7.0 to 7.0.2

    Yesterday on my iPhone 4 I made the OTA update from iOS 7.0 to iOS 7.0.2
    Modem FW is 04.12.09 - no jailbreak, no simlock
    Everything just worked as it should but after the update I did not have Service anymore and my iphone is permanently searching a Carrier.
    I already have resetted all Network settings but without any result.
    I have restored once again via itunes to 7.0.2 but without result.
    Any Idea what I could do?
    I have to be reachable by phone so now I am going to restore back to 7.0 and I hope that it will work again.
    I will update this post later.

    Update, still on 7.0.2:
    After having switched Carrier search from Automatic to Manual a list appears with all available Carriers.
    My Carrier is on the list but when I select it following info appears:
    There are restrictions for the selected Carrier, please select another one or go back to Settings.
    *** ... this is my home Carrier and I am in my home country!!! I never saw something like this before.
    Actually it is the same message as I got when I select another Carrier in my Country where of course access is denied.
    For me this clearly seems to be a bug in 7.0.2
    U P D A T E with ios 7.0
    After Restoring via iTunes from 7.0.2 to 7.0.   SAME BEHAVIOR now :-(
    Phone remains unusable and I do not know what to do .....

  • Lenovo s820 OTA Update error (From S820_ROW_S222_141121 to S820_ROW_S223_150119)

    Hi,
    I also having problem in OTA updation (10.89MB) recently triggered. (I am using Android Kitkat version 4.4.2) while I tried to upgrade the it down loaded properly without any issue.
    Then I pressed upgrade now, then my mobile restarted and shown some upgrading screen....but suddenly a error show n and stopped.
    then I rebooted and pop up says that the OTA upgrade failed!!!.
    Someboday pls. help me to fix this.
    I also did factory default setting.
    Note : Pls. check the error message in attached picture.
    (Installing Update....
    Verifying current system...
    "/system/priv-app/settings.apk" has unexpected contents.
    Update.Zip is not correct
    Installation aborted.)

    I have the same issue with S820_ROW_S222_141121 except my installation halted on "/system/priv-app/ideaFriend.apk"
    Please help.
    The updates kept coming but I could never installed them.
    I have tried OTA as well as from my own PC. Won't WORK!

  • I'd like to make sur the update from iOS 5 to iOS 7 is done OTA and that you don't need to plug in to iTunes to upgrade when your device is in iOS 5. thx

    Can you tell me if the upgrade from iOS 5 to iOS 7 is made OTA and that you don't need to plug in to iTunes using your PC. thx

    If running iOS 5 or later, update can be OTA or via iTunes.
    Be sure to have a good backup. OTA requires at least 3 GB
    free on your iPhone, less if done via iTunes. Make sure your
    iPhone is fully charged and you have a good wifi connection
    before attempting OTA update.

  • Getting OTA updates and App store purchases from another country

    Hello,
    I'm thinking of buying a Palm Pre in Germany (where I live at the moment), but I'm moving to Israel in a couple of months.  My cellphone carrier in Israel will probably be Cellcom.  Will it be possible for me to receive these OTA updates? And will I be able to purchase Apps while I'm there?
    Thanks,
    Post relates to: None

    Same question. I moved from the Macau store to the French store. All my apps and music don't appear in 'purchased' in the iTunes Store and the Mac App Store. I guess it's alright for the apps because I can see what I have in my library, but it's a bit more annoying for the Mac App Store. I was planning to buy an iMac and of course connect to the Stores using my apple id, then download all the apps on the new computer but it seems it's not gonna make it.

  • IPad fails to connect to WiFi after OTA update to iOS 6

    After the OTA update to iOS 6 my new iPad fails to connect to my WiFi network at home. My LANCOM router reports the following issue:
    Index: 62294
    Zeit: 19.09.2012 21:08:28
    Interface: WLAN-1
    Ereignis: Rejected Association from WLAN station xx:xx:xx:xx:xx:xx []: ()
    Adresse: xxxxxxxxxxxx
    Grund: Cannot support all requested capabilities in Capability Information field
    It has worked flawlessly in the past with iOS 5 on my new iPad and iPhone 4. At the moment I hestitate to update my iPhone too.
    Anyone with the same issue or an idea how to fix it?
    Thanks in advance, greetings from Stuttgart (Germany),
    Jens

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • N96 V20 Update: Connection Lost during OTA update ...

    Ok, I decided to update my N96 thru OTA this time. I chose "Check for New Updates" from the phone's menu but while checking if there was a new update, the phone told me "the connection was lost!" with the WLAN modem.
    I am now little concerned about using OTA. What happenes if this happens right in the middle of "updating process?"
    I wanted to try NSU but this time NSU said the latest firmware was still "V12". No luck there either. I guess V20 isn't widely available around the world yet, or is it?
    I don't think NSU would tell me that there was no V20 available yet, where there really was.
    By the way, my phone is purchased directly from Nokia (unbranded, no operator branded.)

    The update may not be available on NSU yet for your product code
    One of the cool things about updating OTA rather than via NSU i sthat if the connection is lost, not only does it not crater the phone, but you get the option to resume your download from where it left off rather than the begining

  • Froyo OTA Update broke my Exchange Account!

    I received the "official" OTA update last night for my Droid and installed it this morning.  My corporate exchange account worked wonderfully before the installation and has been since I got the phone on it's release date.  After the installation, it's broken.  I've tried deleting the account and re-entering it and just get a message that advises that it's unable to connect to the server. 
    I've found that this has happened to many who have used the FRG01B update that VZW rolled out.  Anyone hear of a solution to this problem?  VZW, is there any plan to fix this bug?  I need my email and calendar back!!!  It's part of the reason I got this phone in the first place!

    first, let me tell you about my "registering on these forums" experience.  I tried over and over and it would not let me register.  silly little errors like, "your registration cannot be completed, try again later."
    Nonetheless, I have seen a few postings about how Froyo hoses Exchange(Corporate)e mail and I wanted to talk about why it is happening.   I was finally able to register from within my myverizon account, I could not do it any other way.  Also, got a page cannot be displayed error when I tried to click the support  site for the community/blog.
    Anyway, the solution:
    It looks like Froyo is forcing the use of a certificate on your Exchange portal.  It really is that simple.  Your Exchange Admin just needs to put a cert on the portal and then enable SSL.  That is all it takes, then on your phone, select to use SSL and Accept all Certs in the Inbound Accounts settings.  For some reason, corporate mail does not work without SSL, even if you uncheck the box.
    Most people won't have this problem since they probably already have a cert on the mailserver portal.

  • OTA UPDATE when ROOTED?

    Greetings to all,
    Before my question, I am currently running at this specification:
    Model C903
    Android version : 4.2.2
    Firmware : xxxxx .257
    Rooted? : YES
    No CWM installed. Stock kernel and Rom.
    I would like to ask if it's okay to update OTA while I'm rooted? the reason I didn't update before is because I might lose my game data/progress if I was just going to flash a fresh stock ROM, update and root - restore the game data using TBP.
    I once experienced it that restoring app data from different android version isn't possible, got nothing to do but stopped playing that game.
    Now, i guess my software version is really outdated so I am asking here for some help.I am thinking that updating OTA will best ensure my game data but i do not know if there's any side effect in updating OTA while being rooted because I cannot afford to re-flash a fresh FW atm.
    Thank you in advance.

    My Z1 was rooted when i get it new (T-mobile branded).
    If you update OTA then your Android device will be unrooted.
    If you want to have a uptodate rooted Android, then disable ota updates, and check if their is a updated rom that is rooted or that can be rooted, and use rom manager to flash that. (keep in mind to be sure you use the right rom, otherwise you brick your Android device).
    ∆○×□ PSP1004 (Phat 1st gen.) 5.00 M33-6 (+1.50) + 32GB Pro-Duo.
    ∆○×□ PS4 1.7X + 500GB hdd + Dualshock4 + PS4 Camera,
    Xperia-Z1 Android 4.4.X + 32GB microSD + Philips SHB9100

  • OTA update messes up Incredible

    We have three DINCs.  One of them got an OTA update on Sunday morning (1/3/11) that has messed up the phone.  It has the following issues:
    1) Many apps act as if they are being opened for the first time, EACH time they are opened, IF they open.
    2) Majority apps won't open, FORCE CLOSE.
    3) Handscent sends messages from the previous day when you power off and back on again, i.e. they seem to be stuck in the queue.
    Recommendations for next steps?
    Thanks in advance.

    My first choice is a battery pull, but I doubt that will correct it. But all three of your devices are showing the same thing. So I suspect a corrupt OTA download. 
    I would say to next do a master reset, but if you have time for just one phone, delete the apps and reinstall and see if that clears up the issue.

  • OTA update for A10-70 failed "no command"

    I just updated using the OTA update available for my A10-70 and when it rebooted, it says "No command" .  I can get to the recovery, and I tried doing a factory reset on it, but the tablet still won't boot.  Any ideas?  Is there a factory image I can use somewhere to do the adb sideload?  I'm stuck.

    Well, I found the rar file, but how on earth do I install this thing?  I tried looking at the instructions on their website (translated into english) but there's missing screenshots and the russian doesn't really translate well into technical instructions.
    ROM: http://bit.ly/1qBphja
    The only options for me on the tablet when it boots up is going into recovery (can't connect via ADB), or going into the "apply update from ADB) which gives me access for ADB Sideload,  or going into fastboot (can't connect via ADB).  In a nutshell, where do I need to be when I run the flash tool?

  • New Droid Razr M will not update from 4.0.4 to 4.1, what to do?

    My new Razr M will not download the OTA update to 4.1. It states that the download is available, and after 5 minutes or so has an error and says it will "resume download shortly" where it remains indefinitely. Or it will say "unexpected error" and to try again later. The update says it is 98.12.4.en.US (254.1 mb).
    I have tried clearing the cache, multiple power cycles, trying it on wifi and 4G all with no success. Should I do a factory reset on the phone? Is there somewhere I can download this update to external memory? Any information would be greatly appreciated as the download icon in the notification bar is extremely annoying and I feel as if it is mocking me.

    I have found the solution, which may work for other phones as well after dealing with the helpful tech support of Motorola. First download the motorola device manager and install that. Turn the wifi, gps, and mobile data off from your device and than connect the phone via USB. Once you do, the program will check for updates and will download the update to your computer and than transfer it to the phone. Hope this will save somebody the headache it caused me!

  • Calendar List not displaying all dates after iOS 5.0.1 OTA update

    Following the recent iOS 5.0.1 OTA update, in list mode my calendar now only displays days on which I have entries.  Previously it showed a list of all days.  Can this be changed by a setting somewhere or is this a bug in the iOS? 

    All was good, My battery and SIRI were working fine, then my bad luck that i updated my phone to iOS 5.0.1 (which is promissing better battery life and Siri funcionality). After updating all went crazy, SIRI is not working any more (it says cant do any thing right now and try later, and i am now trying from 2 days), Battery is not lasting longer then 12 hrs as it was better before. I am seriously thinking to go back to my iPhone 4 and distroy iPhone 4S
    APPLE????? i need answers????

  • Periodic sluggishness and Android core force closes since latest OTA update.

    Has anybody else been experiencing this?  The phone was pretty close to perfect up until the latest OTA update last week or so.  Since then it has random periods of sluggishness where the phone essentially freezes up for a while; and worse: at times I'll get some android.process.acore stopped unexpectedly message which usually goes back to a blank HTC logo screen before recovering at the Home screen..
    Nothing else has changed aside from the update.

    Yes my droid is doing the same things as yours.  Mine also is doing crazy things.  I have different  ringtones sent for different people and it still rings with the default ring tone.  This SUCKS!   I love my phone but it is getting on my NERVES!!!!!

  • S8-50F update from factory build failed (Solution below)

    We had received to S8-50F tablets that would not update 000143_140929_ROW_TO_SS000200_150121_ROW using OTA, the tables in this case both failed OTA updates at about 97% download stating that the file could not be downloaded, Retry?  They would then cycle in this loop. After trying to clear cache and factory reset, support tould us that the tablets would need to be sent back in for a reflash (2 seperate calls), so we did some digging.  From this site we nabbed the update http://forum.xda-developers.com/general/general/lenovo-tab-s8-50f-stock-firmware-rom-t2989791 This update file: https://www.androidfilehost.com/?fid=95916177934519789  and placed that in the devices downloads folder.  Then went to Settings > About Device > Update and clicked on the tool box, and chose the manual update method and selected the download file. This allowed the devices to update, and trying OTA for the next build S000164_141103_ROW_TO_S000185_141203_ROW went off with out a hitch.  No idea why the OTA update for the first update failed, but now they both work.  I should mention that this was after I tried the OTA updates, clearing cache and factory resetting the device, as well as trying the update throu Lenovo Smart Assistant all failed. 

    Hi,
    We also had similar kind of issue fortunately it was Training system. It was corrupt block in our case as per note 633914 (As Sunny suggested). We identified the corrupt table,  truncated it and deallocated the space.. Run DBCHECK on the data file just to check if the corruption exists.

Maybe you are looking for

  • Regarding creation of report categeory

    hi friends, could u help me how to create report categeory of my own . i mean while using ldb we get the standard selection screen. instead of that i need just 3 fields in the selection screen of my own. how can i create that and add it to report cat

  • Dynamically Change Company Logo

    I want to create one form used by both of our companies. When the user selects their location, the cooresponding company logo displays at the top of the form including all new pages generated. I was able to get this working with JavaScript but ran in

  • Activating ABAP Web Dynpro's in transaction SICF

    I need access to activate ABAP Web Dynpro's in transaction SICF but don't want access to anything else. It seems that I need to use authorisation object 'S_ICF_ADM' but I can't get this working. Can anyone guide me as to the values I need in there ?

  • Photoshop CS3 to PhotoshopCS3 Extended

    I'm going to buy the Extended version of Photoshop CS3 but wonder if I can install it over Photoshop CS3 or will I need to uninstall/deactivate CS3 then reinstall with the new CS3 Extended license#? TIA Don, Toronto

  • Alert to stop or supress

    Hello All, In CRM 2007 WEB UI I have created a alert and it is triggered if the email field is empty. But when the customer says I dont have the email address so when calls back again to the interaction center the Alert is triggered again so how can