OTB ( Open to Buy ) settings for SD

Hi,
Could anyone provide information on how to set up OTB in SD module.
Regards
Rasheed

Hi Rasheed
Good inventory control is critical to ensuring an adequate level of stock is on hand for the amount of sales being generated. Having too much inventory (or the wrong type) during certain periods can slow your cash flow and reduce profits with too many markdowns. On the other hand, if you under buy and miss sales opportunities then you are not making your potential profit. A retailer can be sure to stock the right amount of the right products at the right time by using an Open-To-Buy (OTB) plan.
Open-To-Buy can be calculated in either units or dollars. OTB is essentially the difference between how much inventory is needed and how much is actually available. This includes inventory on hand, in transit and any outstanding orders.
In order to take advantage of special buys or to add new products, some of the OTB dollars should be held back. This also allows the retailer to react to fast-selling items and quickly restock shelves.
Consider maintaining an OTB plan for your business as a whole, but also plan for each category of merchandise you stock. The plan can be maintained on paper, in a spreadsheet or by purchasing one of the several retail software packages available that contain Open-To-Buy programs.
The Open-To-Buy Formula
Planned Sales
+ Planned Markdowns
+ Planned End of Month Inventory
- Planned Beginning of Month Inventory
= Open-To-Buy (retail)
For example, a retailer has an inventory level of $150,000 on July 1st and planned $152,000 End of Month inventory for July 31st. The planned sales for the store are $48,000 with $750 in planned markdowns. Therefore, the retailer has $50,750 Open-To-Buy at retail.
Note: Multiply that number by the initial markup to reach the OTB at cost. If our markup is 40%, then our Open-To-Buy at cost is $20,300.
Before placing your Open-to-Buy plan into operation, ask yourself if each number is realistic. Does it make sense for the way you do business? Keep in mind that many of the figures on your inventory plan are only guidelines. A good rule of thumb is if your actual ending inventory is within five percent of your plan, you are doing very well.
Sample 6 Month Plan
6-Month OTB Plan June July August September October November
Beginning Of Month Inventory $ 155,000 150,000 152,000 157,000 157,000 165,000
Sales 47,000 48,000 50,000 50,000 52,000 48,000
Markdowns 1,000 750 750 1000 1500 1000
Open-To-Buy 43,000 50,750 55,750 51,000 61,500 37,000
End of Month Inventory $ 150,000 152,000 157,000 157,000 165,000 153,000
Award if useful to you

Similar Messages

  • How do I open the bios settings for a MSI760GMP34FX mainboard?

    I know this is a stupid question but I have never had to do this before in my life and I tried googling it and I couldn't find anything helpful.
    I think something may be wrong with the bios settings on my computer so I need to know how to open them up to check and change them but I have no idea how to do it and can't find any instructions.  I think it's different for different types of mainboards from what I can tell but I am not sure.
    My OS is Windows 7 Pro 64 bit if that makes any difference and my board is a MSI760GMP34FX mainboard.
    Sorry if this is a stupid question but I have no idea how to do this.
    Thank you for your time.

     
    Well thanks again.  Hitting delete once on start up worked like a charm and now my Bluray burner drive is working good as new.  I thought it had broken down and I would have to buy a new one but going into the Bios did the trick.
    You saved me $70, thanks a bunch.

  • TS3048 Is there a way to "calibrate" the magic mouse? I have rearranged settings for mouse, air-cleaned, tried different surfaces, however, it seems to be misinterpreting finger movements and randomly trying to open launchpad when enabled.

    Is there a way to "calibrate" the magic mouse? Batteries are good. I have rearranged settings for mouse, air-cleaned, tried different surfaces, however, it seems to be misinterpreting finger movements and randomly trying to open launchpad when enabled-flashing between the app I am in and launchpad. When right-click is enabled I have to go to the extreme upper left of mousepad to click or it is interpreted as right-click. Won't consistently "scroll". Suggestions?

    Here's some things you could try....
    Reset your computer's PRAM
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Mac OS X: Starting up in Safe Mode
    http://support.apple.com/kb/HT1455

  • How do I change the default settings for opening documents on my macbook?

    Hi I would like to know how to change the default settings for opening documents on my macbook. Everytime I try to open a doc. it automatically opens with Textedit, instead of Pages or another program.

    Select any particular document you wish to fix. Press COMMAND-I to open the Get Info window. In the Open With section select the desired Default Application from the dropdown menu. Click on the Change All button to extend the change to all similar documents.
    You can only assign one default application to one type of document.

  • When I open TB, under "Accounts", it only shows the option "Create a new account". Option: "View settings for this account" is NOT shown.

    When I open TB, I no longer see any information about the TB account I've used for years. Instead, the main menu shows only "Accounts" -- "Create a new account - Email, Chat, Newsgroups, Feeds". Option: "View settings for this account" is NOT shown.
    Also the main menu does NOT show "Email - Read messages, Write a New Message" or "Advanced features", etc..
    The actual emails pertaining to the TB account I've used for years are still present under the "Users --> xxxxyyyy --> AppData --> Roaming --> Thunderbird' folder.

    http://kb.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared

  • TS4425 when opening the iCloud settings I do not see an option for the iCloud T&Cs (OS 10.8 & iOS6)

    when opening the iCloud settings I do not see an option for the iCloud T&Cs (OS 10.8 & iOS6)

    which Apple says should appear automatically once the update is completed...
    I am perplexed where you read that. It isn't true. The iPad is synced to the data available to all devices using the iCloud account if you have authorized it in the settings; PhotoStream, Contacts, Mail, Calendars, etc. That is how the iCloud works.

  • PSE9 - import / open settings for jpegs - are there any?

    Hi all,
    I'm a LR3 user mainly so have very little idea about PSE9 but my Dad's Panasonic Lumix FS10 takes all images at 180dpi and this cannot be altered.
    Is there any way of getting Elements 9 to alter the resolution that it immediately displays the images at, as unlike LR3 there doesn't appear to be any 'export' facility where you can batch export loads of images and have individual 'save' settings for each export.
    Altering each and every image to 72dpi before saving as jpeg is a complete pain in the whatnots.
    I've tried the batch convert option for all open files but it saves a copy of each file which ends up bigger than the original!
    Many thanks in advance.
    Dave.

    juergen_d wrote:
    DPI is an arbitrary number set by the camera manufacturer.  Some cameras show 180, some 240, some none, which  is defaulted to 72.  The file size is not influenced by it.  DPI = dots per inch is only relevant for printing and should be referred to as PPI (pixels per inch).  The really important values are the pixel dimensions of an image.  Of course, the file size is also dependent on the picture quality and compression algorithms.  If you 'converted' from 180 to 72 and afterward had a smaller file size, then a additional compression must have taken place, which would have lessened the images' quality.
    Juergen   
    Thanks for this Juergen,
    are we now heading to the "eye of the beholder" scenario though?
    If the images 95% of the time are going to be used for posting on the internet / viewing on PC monitor use (this being maxed out at 72dpi), and no image quality loss can be seen between the 2 (72dpi & 180dpi) files, the user may as well stick with the 72dpi conversions and have smaller files then?
    When the user normally then reduces the image dimensions to 1200px on the longest side, surely the 72dpi verisons will be better for them?
    Granted as I mentioned before, the images may get used for printing once in a while, but again, I use my full-sized images at 72dpi and can get pin sharp A4s out of them whenever I want.
    Dave.

  • GMail.  Changed password on PC email account, and did same on IPhone 4 Settings for Gmail.  App opens but tells me username or password for Gmail is incorrect.  Have ensured both are correct...still no access

    GMail.  Changed password on PC email account, and did same on IPhone 4 Settings for Gmail.  App opens but tells me username or password for Gmail is incorrect.  Have ensured both are correct...still no access

    If you have 2-step verification set up for your gmail account, you will need to generate an application-specific password for your iphone applications (because those apps apparently don't support 2-step verification).
    Go into your google account, look in accounts/security/2-step verification, there is a link called "Manage your application specific passwords"   Use that to generate a special password for your iphone apps and use that instead of your usual gmail password on your phone.

  • Best settings for importing HD movies to ATV for video gallery

    hello -
    i work for a gallery, and we have a video artist who will be showing HD videos here for 2-3 months. we bought 2 AppleTVs to use to show the movies, and i'm trying to figure out the best way to convert the material and get the files on there.
    using the "Create Apple TV version" doesn't preserve the HD quality of the originals, which i know aren't compatible natively. i was hoping there is a place in the settings for the ATV where i could at least review the video codec in use when converting in iTunes, but there doesn't seem to be a place for it. am i blind or is there no choice in the matter?
    i've tried converting in Quicktime Pro using the settings that are on the ATV specs page, and i was successful once (in a short excerpt without much video movement) but no longer (using an excerpt that has more color, movement, etc). the bit rate is too high i'm guessing, tho i've tried to limit it to 5000 k/sec. it ends up coming out 18m / sec for some reason......
    for some reason i can't get handbrake to open the file.
    any thoughts? we can't afford to buy new computers to stream the original off of, so we're hoping the ATV can show the movies in the highest def possible. she sent them in 720p50 format, so i had to buy a decoder plugin to view them (DVCPro HD from Calibrated Software).
    thanks in advance
    bbbb

    hello -
    i work for a gallery, and we have a video artist who will be showing HD videos here for 2-3 months. we bought 2 AppleTVs to use to show the movies, and i'm trying to figure out the best way to convert the material and get the files on there.
    using the "Create Apple TV version" doesn't preserve the HD quality of the originals, which i know aren't compatible natively. i was hoping there is a place in the settings for the ATV where i could at least review the video codec in use when converting in iTunes, but there doesn't seem to be a place for it. am i blind or is there no choice in the matter?
    i've tried converting in Quicktime Pro using the settings that are on the ATV specs page, and i was successful once (in a short excerpt without much video movement) but no longer (using an excerpt that has more color, movement, etc). the bit rate is too high i'm guessing, tho i've tried to limit it to 5000 k/sec. it ends up coming out 18m / sec for some reason......
    for some reason i can't get handbrake to open the file.
    any thoughts? we can't afford to buy new computers to stream the original off of, so we're hoping the ATV can show the movies in the highest def possible. she sent them in 720p50 format, so i had to buy a decoder plugin to view them (DVCPro HD from Calibrated Software).
    thanks in advance
    bbbb

  • ITunes looses photo sync settings for Apple TV (1st gen.)

    Since the update to the new Photo app on my Mac, iTunes forgets the photo sync settings for my Apple TV (1st. generation, 160 GB HDD).
    Every time I open the photo section of the Apple TV sync settings, all the options are turned off. Then I mark a couple of albums and sync the Apple TV >> all album appear on the Apple TV.
    But after closing and re-opening iTunes in the photo settings everything is unmarked again. So on every following sync the photos on the Apple TV are easily erased :-( Resync them to the Apple TV takes hours (>30'000 photos!).
    All the other sync settings in iTunes remain intact.
    Environment:
    - MacBook Pro Retina 15" with the latest SW (Mac OS, iTunes, Photo App, etc.)
    - Apple TV 1st gen 160 GB HDD

    Restarting iTunes resolves the issue in the majority of cases, if it doesn't my second guess would be your security software.
    What really seems strange here is that there have been no updates since well before Xmas, so after initially setting it up, the first update would have brought you right up to the most recent (and indeed the very last) .
    Agh, how silly of me, I see it's iTunes you have updated.
    If that's about all you've changed, you might want to try reinstalling iTunes and bonjour.
    Message was edited by: Winston Churchill

  • I want to open Twitter, but after I type the password, it doesn't open, but the message for saving PW does appear... can you help me?

    I'm using FF on another computer, and pages that I have used in the original have opened, except for Twitter. I give the PW and the message for saving the password appears, but Twitter's HP page doesn't open, instead the registration page is the one that does... I have tried with another system and the page opens, so I know the problem isn't Twitter's, but FF's... can you help me? I want to open Twitter here...

    This issue can be caused by corrupted cookies or cookies that are blocked.
    *check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
    *https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

  • How to change default settings for a video generator?

    I'm using a video generator (Lyric Media's Pan Zoom Pro) many times in the same project, and have to change the default settings for each new instance of the generator that I create. I'm wondering if there's any way to change the default settings for a generator (i.e., length of clip, individual slider and checkbox settings in the "controls" tab) so that each new instance automatically has my customized settings when I first open it.
    Thanks.

    That works for the all the controls/filter settings. The clip length still defaults to 10 seconds, but that's OK, since the main thing I was looking for was to change the clip's internal settings. Thanks for your help

  • Questions on cache and general RSRT settings for plancube

    Hi,
    we would like to:
    1) set request status 1 in RSRT for our planqueries, in order to automatically refresh the query after executing a planfunction (problem we have now is that the results of a planfunction are not automatically updated in the query. Only when doing something else like executing other function, saving, check locks, ... the results are visible).
    2) activate delta cache for our planqueries
    we have read OSS note 1136163 on RSRT settings. It says:
    Aggregation level "A" is implemented internally by the automatically created query "P/!!1P" (plan buffer query). This query acts like an InfoProvider. It reads the data of the database or provides the data from InfoProvider "P", it adds the data of the delta buffer "Dp" (or the delta buffer Dpi if P is a MultiProvider with several PartProviders Pi that can be planned) and transfers the data manager as data of the InfoProvider "A" of type "ALVL". The query "P/!!1P" can use aggregates and the cache; this is exactly like each normal query in "P". If "P" is a MultiProvider, it is useful to set PARTITIONMODE to "1".
                  For the query "P/!!1P" that is created automatically for an aggregation level or for all aggregation levels using the InfoProvider P, we recommend the following setting:
                  Read mode "H", request status "1", cache mode "1" or higher, delta cache "true" and SP grouping "1".
                  Furthermore, the selection to use the structure element (KIDSEL) should be "true".
                  The input-ready queries in "A" should not, and cannot, use a cache. The request status is irrelevant since queries in "A" are automatically set to current data. The delta buffer does not currently support hierarchy processing. Therefore, aggregation level "A" cannot completely support read mode "H". For input-ready queries at A:
                  Read mode "X", request status "0", cache mode "0".
                 The delta cache and SP grouping are not visible
    Problems we have:
    1) for query P/!!1P (PCA_AGQF/!!1PCA_AGQF in our example) does not allow changing the request status (greyed out). It now has value 0 instead of 1. It also does not allow to activate the delta cache flag. How to change this? In RSDIPROP we have set partitionmode to 1 for the multiprovider and activated the delta cache flag...
    2) can we use the cache / delta cache principle for our planqueries? If so, how to ensure these settings remain activated in RSRT?
    regards
    Dries
    regards
    dries

    Hi,
    To change the cache settings for your cube.
    Open the cube in RSA1 and click in 'Chance'.
    - click in the 'Environment' menu;
    - expand 'InfoProvider Properties'
      - select the option 'Change'.
    You will be able to set the cache mode for this provider.
    I don't think it will be possible use cache for a multiprovider, it is
    not possible.
    Regards,
    Amit

  • Unable to open "compose mail/settings/contacts" in standard view in 2 out of 3 Gmail accounts

    Unable to open "compose mail/settings/contacts" in standard view in 2 out of 3 Gmail accounts. When "compose new mail" is selected "loading...." appears at the top then the page is frozen. ie you can't select inbox etc. Changing from standard to basic h/ml then clears the Loading... and gmail can be used (without spellcheck etc).
    This might not be Mozilla, but I can access these accounts in standard view on another computer.

    Your Gmail account may well be an IMAP account, just like the iCloud mail account. In which case it will work in just the same way as iCloud mail, except that you will have to set it up manually on each device, where as iCloud mail adds the account itself when you log into iCloud.
    Whilst it works the same as iCloud mail it isn't iCloud that syncs it for you.

  • Bought my hubby an iphone4 and I registered it and opened an apple account for him.  I have an iphone 5 (under my own Apple account).  I use icloud to sync calender and contacts with outlook 2007.  How do I add my hubby's phone (account) to icloud ?

    Bought my hubby an iphone4 and I registered it and opened an apple account for him.  I have an iphone 5 (under my own Apple account).  I use icloud to sync calendar and contacts with outlook 2007.  How do I add my hubby's phone (account) to icloud so I can sync the same contacts and calendar?

    On his phone, sign in Settings>iCloud and enable Mail so that he can have his own email address. Then add your account in Settings>Mail, Contacts & Calendars and enable Contacts and Calendars. They will then appear on his phone alongside any syncing he has set up. This will keep your emails separate, or you can add Mail as well so that you can both access that if you want. You can add his account in the same way on your phone and enable any data types you want to sync.

Maybe you are looking for