Other devices than printer and external HD possible on Airport Extreme

This was my plan.
I connect a USB HUB to my Airport Extreme, on which I connect my VectorWorks USB-stick, my printer, my scanner, my external HD (which also operates as a HUB, with my iPod Shuffle, my iPod and my iPhone (the last one not yet, but it is ready for it)).
But is this setup possible?
I just connected my VectorWorks USB-stick (a stick I need to run VectorWorks, a CAD-program) on my HD (via HUB, via Airport Extreme), but that didn't work. Then I connected it to my USB HUB (via Airport Extreme), but that didn't work as well.
Is there a way to connect all my USB devices on a HUB, via Airport Extreme

As you have discovered, that is NOT possible.
The USB port on the AirPort Extreme base station (AEBS) only supports USB printers and USB hard drives.
It will not support devices which act as "keys" for software/hardware authentication.

Similar Messages

  • I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

    I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

    Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
    Sorry, but no.
    Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
    Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

  • For 3 years my iMac and miniMac both communicated with a Canon printer and the internet using an Airport Extreme.  Last winter, the miniMac lost printing via the Airpor and now can't communicate with the network at all.

    For three years my iMac and Mac mini were networked via Airport Extreme with a printer and the internet.  More recently, I added an iMac and iPhone.   PROBLEMS:  A few months ago the Mac mini lost its connection to  the printer, and now it cannot locate the network at all. 

    If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
    Use the same SSID and password for both machines. Computers will connect to the strongest signal.

  • I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?

    I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?

    Go to Mail Preferences
    Click on the General tab
    Set  "Check for New Messages:"  to  "Every Minute"
    Hope this helps

  • My iPhone 5 is not being recognized by my iMac.  All my other devices, including iPod and iPad are recognized with no sync problems.  I've tried every approach with online help as well as an Apple advisor by phone.  Help?

    My iPhone 5 is not being recognized by my iMac.  All my other devices, including iPod and iPad are recognized with no sync problems.  I've tried every approach with online help as well as an Apple advisor by phone.  Help?  Any other suggestions other than going to an Apple Store?

    Back to life**
    Oh I know there are many other vocabulary mistakes but never mind them I was just too excited when I wrote all of that while typing very quickly
    P.S: if you have any question then ask and please do tell me if it works or not with u but I'm definitely sure it'll work so tell me this and we'll get excited together
    Also if you have an experience to share then do share it as well please.
    Peace

  • Problems with printer and external HD connected via Time Capsule with Windo

    Hello everyone!
    In January I bought an iMac 27 "(OS version: OS X 10.6.2) and a week ago a Time Capsule 1TB.
    I connected the iMac and a laptop with Windows XP SP3 both via ethernet to the TC, and to the USB port of the TC a USB hub to which I connected a Canon iP4200 and a LACIE 500GB HARD DISK.
    I reformatted the hard disk file system to Lacie Mac OS Extended (Journaled) and installed MacDrive 8 in the laptop.
    Now (after formatting the HD), with the iMac everything works: internet connection via ethernet or wireless, printing via ethernet or wireless as well as hard disk connection via ethernet or wireless.
    Laptop, instead, is only able to connect to the internet via ethernet or wireless while it isn't able to see and use printer and external hard drive, even though I installed AirPort Utility for Windows!
    The laptop also detects the AirPort disk of the TC but if I enter the (correct) password I get an error message!..
    Please, somebody help me, I do not know what to do!
    Thanks

    Have you run Bonjour on the Win PC's? Do a search on the support page and there's a description on getting things up and running from a WinPC in a Mac environment.

  • I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How?

    I have an iTunes account set up long ago on my home pc. My pc at home is antiquated and I can't interface with my account to edit acc. Info. Now I have other devices, iPhone 4 and iPad. I need to reset email apple Id and pw from iPad. How? Should I just create new account? Don't want to lose 1500 songs.

    Hey Frankgates!
    I have an article here that can tell you how to do this:
    Apple ID: If you forget your password
    http://support.apple.com/kb/HT5787
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Will over the air mirroring be available for iPad 2 to other devices than the AppleTV? Devices such as the Boxee Box?

    Hi there.
    I was just wondering if anyone knows if mirroring over the air will be available for the iPad 2 to other devices than the AppleTV?
    Devices such as the Boxee Box?
    Air Play works fine with the Boxee Box when viewing photos, videoes or listening to music, but what about mirroring?
    - Bubbi, Denmark

    If you feel so strongly about something, why not tell Apple directly through the provided link:  http://www.apple.com/feedback?

  • Unable to print or use external hard drives via Airport Extreme

    Hi.
    I installed Airport Extreme with no problems. Airport utility program shows everything is ok, and shows my printer (Canon LBP5100) and my two external hard drives which are connected to Airport via USB-hub.
    My airport extreme is connected to ADSL-router and is providing another WLAN in my house. The internet connection works fine, but I couldn't print nor use my hard drives. I installed the printer using the bonjour guided printer installation tool.
    I haven't heard that my printer would not be compatible with airport extreme so was my airport purchase totally unnecessary or what tricks should I use to make the printer and the external hard drives be available?
    Sincerely,
    Jarkko
    Finland

    Hi.
    Thank you for your reply. No help though.
    Printer gives me this warning:
    The network cable is not connected, or the printer is not turned on. Check these items.
    And still the hard drives are not visible anywhere.

  • I want to increase my wireless network coverage upstairs and to the other side of my house. I have an airport extreme down stairs, can I get another one upstairs and hard wire it in?

    I want to increase my wireless network coverage upstairs and to the other side of my house. I have an airport extreme down stairs, can I get another one upstairs and hard wire it in?

    Yes.
    It has been covered recently. I as interested in same question matter of fact but I will have to look up details or you could search.
    Bob Timmons has contributed to this question so look his up and find it as well.
    See this link;
    https://discussions.apple.com/message/18017606#18017606
    Also this;
    https://discussions.apple.com/message/18077215#18077215
    Message was edited by: WilliamNewMart, to add links and correct spelling.

  • Can I use the Time Capsule strictly for system backup and continue to use my Airport Extreme for all my wireless needs

    I want to use the Apple Time Capsule as an external drive and continue to use my Airport Extreme for all my wireless needs. Can I do that? The reason I ask is that my Time Machine utility cannot find the TIme Capsule - it only shows me the Airport Extreme, even when I "Rescan". SO I am unable to use the Time Capsule.

    You will need to connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule.
    Perform a "hard reset" on the Time Capsule by holding in the reset button for 9-10 seconds, then give it another minute to restart to a slow, blinking amber light.
    Open AirPort Utility, select the Time Capsule, and click Manual Setup
    Click the Time Capsule tab located below the row of icons to assign a name to the Time Capsule, a device password, and adjust Time Zone settings.
    Next, click the Wireless tab located to the right of the Time Capsule tab
    Change the setting for Wireless Mode to Off
    Click the Internet icon, then click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Click Update at the lower right to save the settings and allow 30 seconds for the Time Capsule to restart to a green light.
    You are all set

  • I Have  "New" MBP (Mid 2009) and Would Like to Use Airport Extreme

    This might be a very basic question , but I do not know the answer so I came to some experts for help. I have a "new" MBP OS 10.6.4 SL. I received it about 1 month ago after the genius bar could not fix a 3 year-old MBP. At one time the Airport Extreme was hooked up when I first got the 3-year-old MBP, but I kept running into troubles with it so I purchased a Verizon MiFi2200.
    I have this new MBP, I still have the MiFi2200 from Verizon which I access via Airport. I would like to try the 3 year-old Airport Extreme again, but I am wondering if having the Verizon MiFi2200 will allow me to also have the Airport Extreme. Also, I am wondering if this Airport Extreme is too old for what is currently available (and if it is secure enough). I would need to get help from Applecare. I tried once, when I first started having trouble with it, and it was way beyond my ability. I think I made things worse and I hope I did not do any hardware damage. I tried to set it up, after having it disconnected for about 2 years, and I did not call applecare.
    So I am wondering if I can have the MiFi2200 installed by VZAccessManager (but turned off when I use the Airport Extreme) and the 3 year-old Airport Extreme 802.11n Wi-Fi Base Station set-up at the same time. Also, is this model still OK to use (I really have no idea how long something like this Airport Extreme is good to use), and if I can use it, are there online instructions to set it up or would it be best to get Applecare's help. I would also like to know how I could find out if there have been any firmware updates or other updates for this Airport Extreme since it was last used (about 2 years ago)
    thanks in advance and I apologize if my terminology is not correct or too amateurish.

    OK, I am not following you exactly and I guess it is important to know what the existing set-up is like. Maybe you will understand my amateurish language. Before I moved in to this condo, the manager of the complex asked me if I need to use the ethernet ports in the rooms or will I be setting up a wireless connection. I said, for now I will be using the ethernet ports in the rooms of the condo. She said Ok, I will be up to your condo to put in a modem. (She could have said router or modem, I am not sure if there is a difference, but I do know the Airport Extreme is considered a router.) She opened this box that is on the wall while she said this is where the "T1" line comes into your condo, and T1 (I think I have the right term she used) is the fastest way to get around the internet. In the box in the wall is an electrical outlet (which the tiny blue modem (I will call this a modem because I am not sure what it is) is plugged into. In the back of the tiny blue modem are 5 ethernet ports and that is all, except for the power cord which connects to the side of the tiny blue modem. In the box, already screwed into place is a CAT5 ethernet strip, for lack of a better term that has 12 ethernet ports but only 4 are actually marked. I think the four that are marked are the ones that can be used, if I needed this many, but I am only using 3 and the ethernet cable goes from one of the ethernet ports on this CAT5 strip which is connected to the T1 line, and one of the 3 ethernet cables goes from the back of the tiny blue modem to one of the ethernet ports on this CAT5 strip (one that is marked as previously described) So I can hook up to the internet by using one of the 3 ethernet plugs in the various rooms of the condo or I can use the MiFi2200 from Verizon for a wireless connection. I have already told you why I prefer not to use the Verizon MiFi2200 and why I would like to set-up my Airport Extreme.
    As far as wanting to use the existing ethernet ports in the 3 rooms, I do not care about that unless the Airport Extreme does not work. The manager who initially hooked up the tiny blue modem said if I want a wireless connection I do not need the tiny blue modem. If I do want to use the ethernet ports in the rooms via an ethernet cable, I need the tiny blue modem. If this is tru or if I can have one and not the other, I really did not get a sense I could or could not have both a wireless and ethernet connections at the same time.
    Why would I want to plug the 3 or 4 ethernet cables that go from the tiny blue modem to the ethernet strip? The ethernet strip has about 10 ethernet ports, 3 of which are marked and I assume only those 3 can be used since there are only 3 actual ethernet ports in the walls in various room for connection.
    I know this is a different set-up but when I used the Airport Extreme before, I had a cable come in to my house from Comcast which was hooked up to a modem. One ethernet cable went from the modem to the back of the Airport Extreme which after Applecare helped me set up the Airport Extreme the whole house was wireless.
    In this condo, which is smaller than the house I had, why do I need all 3 ethernet cables to go from the CAT5 strip to the back of the Airport Extreme? Again, on the 12 port CAT5 strip, only 3 are labeled with some code, and those 3 go out to the wall ethernet ports.
    Are you getting ready to give up on me?

  • How do I remove an external hard drive from airport extreme using airport utility 6.2

    I want to remove an external drive from my airport extreme but unsure how to do so (apart from just unplugging it). I need to take it away and hopefully plug it back in later. Any advice would be appreciated.

    Unfortunately, AirPort Utility 6.2 does not provide you with the option to "unplug" a drive.
    If the drive is mounted on your desktop, simply drag its icon to the Trash.....or.....right-click the disk icon and choose the Eject option.
    Now you can disconnect the hard drive from the AirPort Extreme.
    If the drive does not appear on the desktop, then you can simply physically unplug the drive.

  • I am having problems printing from my iPad via my AirPort Extreme network.

    I am having no success printing from my iPad via my AirPort Extreme based local network. I can use this to print wirelessly from my iMac OS X 10.7.5 and MacBook Pro OS X 10.6.8. I have 2 printer options: HP Laserjet (B&amp;W) P1005 hard-wired to the iMac and HP Photosmart 7760 hard-wired to the AirPort Extreme. I believe I have checked all the correct boxes to enable the network and the iPad to connect, including ensuring that it is using the same network but when I try to select a printer I get the message that no printer can be found. Will it not work with an AirPort Extreme based network or only if this is connecting to wirelessly enabled printers which I do not have.
    Thanks for any suggestions.

    Hi,
    Apple's AirPrint only support specific models while using wired or wireless network connection.
    Plugging a printer into a USB port of Apple base is not supported for AirPrint:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
    http://support.apple.com/kb/ht4356
    There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
    http://www.ecamm.com/mac/printopia/

  • Why i can't find the external HDD plugged to airport extreme. i already format it with mac OS extended (journaled)

    Why i can't find the external HDD plugged to airport extreme. i already format it with mac OS extended (journaled).
    Does only certain branch of HDD can be connected to aireport extreme?
    I collect some information and i knew i have to partiion the HDD into Mac OS extended (journaled),
    and i did so. Still the usb HDD cannot be found.
    The other question is, can i partition the HDD into two sections, one of it is Mac OS extended(journaled) while the other is Fat32?
    I want to share Fat32 section with another PC with windows system.
    Thanks a lot if you have any suggestions.

    I had tried to set up the connection via usinb a powered usb hub as the bridge between external HDD and the airport extreme. i still cannot found the HDD in the "airport utilities".
    This is my setting.
    1. Set airport extreme  as "sharing-single-ip" mode. The wireless network functions correctly.
    2. Connect external HDD to MBA. Partition it into single-partition with Mac OS extended (journaled).
    3. The HDD can be found if i plugged it directly to my MBA.
    4. Connect a powered usb hub to airport extreme.
    5. Connect external HDD to the powered usb hub.
    6. Open airport utilities.
         a. Select "airport extreme" in the sidebar.
         b. Change the "Disks" sheet.
    7. Cannot find an external Disk
    Is there any problem here?
    Please help me. Thanks a lot!!

Maybe you are looking for

  • How do you determine the distance between the QRS interval, as well as the time over that distance, in order to calculate a heart rate

    Hi! I have a continuous sample data acquistion VI created.  I collected an ECG signal from electrodes connected to an ELVIS unit.  Once I viewed my signal, I am curious to determine the heart rate.  I need to know how I can find the R-R interval, as

  • Creating Web Galleries

    I have tried to search for a like post, so sorry if I duplicate this. My Aperture install is fine and has been running for about 6 months now. I use the web gallery feature to show proofs of weddings I have done, it has worked twice. Now when I selec

  • Getting a org.apache.jasper.el.JspMethodNotFoundException Urgent

    Hi I am having a page for creating a workplan. On that page i am having a button new to create a work plan item. Clicking on that button opens a new page of work plan item. I have an action method defined in my bean class for this creation. when i cl

  • Problem in printing Adobe form

    I have created a form in SFP... When I execute it.. and select print preview, I get this message: "Device type unsuitable for ADS documents" This error is also comming if I run the standard SAP forms. I have gone through the ADS document for printing

  • A better HTML gallery

    Does anyone know if there is a downloadable plugin for an enhanced HTML5 gallery for Bridge? Right now it seems that all of the other options are Flash options which won't work out for iOS as a standalone webpage.  It would have to get converted to a