Other Dynamics brush option in CS 5

Hey, I have CS3 on one computer and CS 5 on another. On CS3 my dynamic brush options have a section called 'Other Dynamics' that allows me to change jitter opacity, but my CS5 does not have that option in the same area.
Does CS5 not have 'Other Dynamics' for brushes or is it just somewhere else?
Thanks

Adobe is following in Microsoft's foot steps they seem to want to drive their users crazy or up the wall by changing names and locations of things. They don't worry too much about braking actions that might use a menu Item they rename or remove. Try Transfer brush option.

Similar Messages

PsElements10 - Brush Options, Hue Jitter

I lately installed PSElements 10 (on Windows 7), and i'm observing something i don't understand with the brushes Hue Jitter Option.
The official definition for Brush Option - Hue Jitter is :
"Sets the rate at which the stroke color switches between the foreground and background colors. Higher values cause more frequent switches between the two colors than lower values."
And that's usually how it works.
Example => basic brush, foreground color : red; background color: green; when hue jitter is at 0, the drawed line is red; when Hue Jitter is >0, the drawed line switches from red to green. No problem.
But then, i choose a special Brush (the Butterflies, for an example) => The appear in many different colors (not only red and green)
That's a special Brush (and the Hue Jitter isn't doing anything with this Brush), well ok.
And finally, i switch back to the basic Brush, and now the "Many different Colors" from the butterflies seem to be inherited by this basic brush, no way to make the Hue Jitter Option work again between foreground and background color.
Is this a bug ?
Regis (from France)

Elements can be buggy from time to time as far as the brush settings go because those brushes were probably made in the full photoshop version, which has more options for varying the colors of a brush (color dynamics).
In later versions of elements that is the wrong name for that option (hue jitter). It's actually color jitter as it's properly named in photoshop elements 2.
In photoshop elements if you have the Keep these settings for all Brushes checked, then the options from one brush will carry on to the next.
(If your using a tablet things may act strange from brush to brush if you have some of the dynamic settings enabled in Brush Tablet Options)
Also sometimes the settings get "stuck" so you may have to reset the Brush Tool, which is probably what's happening in your case.
Message was edited by: R_Kelly

The Pressure is greyed out in Calligraphy Brush Options. Can anyone explain this to me?? NEED HELP

cant pick it, it was greyed out only Fixed and Random can be choosen from the Calligraphy Brush Options. NEED HELP

really? so what could i do to make lines likes these in these picture i mean lines that starts thin, then thick, then thin lines like in the picture

Can't see my Brush Options in PSE4 (WIN)

Just bought and installed PSE4. I am trying to play around with the brushes, but I can't see where to change the brush options. I was told it was beside the tablet options (in the upper right hand corner), but that is so far to the right there is nothing after it.
Can anyone help me? Pretty please!
Thank you!
Noella

Thank you, thank you, thank you! That was the problem...now just getting used to having everything way smaller!
Thanks again!
Noella

CS4 drag-resize brush option problem

In CS4 the drag-to-resize brush option should display as red (the brush preview default color) but no color shows up. Nor with the drag-to-set-hardness shortcut either. Both shortcuts work. I cannot see the hardness change on screen but a quick check of the brushes indicates that it did indeed work. Just no color indicator for either shortcut.
Vista 32 Ultimate SP1, Dell M1210 laptop with 4 GB RAM, NVIDIA GeForce Go 7400, 320 GB drive.
Thanks,
John

John, some info please. Are you using the right mouse button plus Alt key? When changing the hardness, I have to hold the Shft key first and then the Alt key before I click and drag with the right mouse button. I am using Vista Ultimate 64 but that shouldn't make any difference. When some of these little irritants pop up, I usually restart PS and delete the preferences to see if anything changes. Just a suggestion.
Wes

Brush Option Error Message

I have a problem with brush option in PSE7 (which come with Wacom bamboo that bought many years ago and never use it).
It show me "invalid numeric" (see pic) and I can't do anything, the error message re-open after click "ok", I must go to my task manager and force close it evertime.
I don't know what happen, so if who know how to fix it, please tell me.
Thank you.

Try this
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.

Imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one?

help! imovie media browser only has one option, "Mobile". other videos had option for medium and small. mobile option wont import into iDVD. other videos gave me the Medium option, why not this one? need answers ASAP!

That is your answer then.
Large is 960x540
Medium is 640x480 (or 720x480)
Mobile is probably 480x272.
It is offering you the sizes that make sense given the size of your source material.
As a trick, you might try this. In your project, put a short 640x480 clip in the project as the first clip of the project. Then keep the rest of the project as is. See if it will let you share now in Medium. It will not look as good, because there are not enough pixels to cover the Medium size, but it might work.

Wet Edges brush option in Elements 11?

I'm trying to find the wet edges option which is in a lot of tutorials for watercolor brushes but I can't find any tool options for it.

You are looking at tutorials for Photoshop, where almost everything has more settings than are available in PSE. There is no wet edges, which is why you can't find it.

Brush Options in Flash CS3 not showing up

Hello. I'm using Flash CS3 and I'm not able to see all of the
options for the Brush tool. I don't have the pressure-sensitive
option or the tilt option. Is there something I need to download or
click on to get these options? I'm not sure why I don't have them
available to me..my tool palette ends at the brush size and shape
options at the bottom. Any ideas please?

jgleica,
> I tried that but it must be the biggest it can get.
there's no
> arrows or indicator it can be resized further in the
corners
> of the tools palette.
Woops, it's the Flash CS4 Tools panel that has more resizing
options.
In Flash CS3, you should at least be able to adjust the width
of the Tools
panel (click the very top, in the area of the panel that has
double arrows).
The wider version of that panel gives it two columns, and
shortens it --
which might just show your missing buttons.
> There's just empty space there. Is there an extension
pack
> or something I should've downloaded maybe?
There may be updates since Flash CS3 was originally
released, but there
aren't any extension packs that add graphics tablet choices
to the Tools
panel: they're definitely supposed to be there, and Flash CS3
shipped with
those buttons in the original release.
What happens if you select Default from the Workspace
dropdown?
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Calligraphic brush options

Only "fixed" and "random" options work. All the others are grayed out. Any idea why?

It works now! Thank you so much, Shrastogi!
Could you please help me with one more thing? Does the variable width profile work with calligraphic brushes? I have been trying to change the width and I do not see any variation in terms of how the brush looks like. Any idea how to use the variable width with calligraphic brushes?
Thanks again!

Since the last upgrade, FF no longer runs on my laptop! I get the crash report box but it never restarts upon pressing that option. I can't try the safe mode or the other self-help options because no FF browser window opens.

FF worked fine before I accepted the latest update just a few days ago. My friend who lives far away said that she also has problems since the upgrade. When I click on the thumbnail to open FF no window opens, all I see is the crash report. Without the window I can't try the self-helps or give a crash ID (from what I understand from reading the options). None of the options in the crash report restore the browser. When I click on one, the box just pops right back up.
Other than general slowness of my system and some possible hacking which got someone into my paypal account this week, I've had no other computer issues. (I've changed my email address with PP & changed my email passwords in case someone is accessing my machine through my email...I'm not very computer literate...I don't believe this can happen, yet no other options were presented).
Because my friend also experienced this crash issue I think this is totally related to the upgrade & what ever it did to my computer such that FF no longer loads.
Please give me steps to fix this issue without FF running--all the self-help techniques seem to assume that I can run FF, get a browser window, utilize the links therein. I can't get a window open at all!

YAY!! I have Safe mode!!
um, now what?

Other display resolution options

I've just bought a 19" widescreen display to go with a (planned) new mini. In the meantime I've hooked it up to my G4 iBook.
Question is: is there any way of working around the standard resolution options in the Display Preferences. 1024x768 gives me a stretched image on the external screen. If there's no way of setting other options (the screen has a max of 1400x900), is it at least possible to make it 'lose' a bit of screen space at the sides and use a little less territory, but in the right proportions?
I know this is not the forum, but does anyone happen to know whether I'm likely to have the same problem with a new Mini (I'm assuming it has a much more flexible driver).

I'm sorry to anyone who has fumed about the stupidity of my previous question.
I've found an option within the monitor set up - 'expand to fill full screen' - which was switched on. When switched off, everything appears with normal proportions.
Hopefully the information will still be of use to other visitors.

How to avoid page break in row other that the option "Avoid page break"

Hi Experts
Is there any way to avoid a row to be broken or extended to other page. "Avoid page break" option can not be used as it creates a lots of white spaces.
Regards
Sourashree

If it is related to visibility you can choose Draft Mode or change the Page size.

No pressure sensitivity button in brush options in flash cc

i have been using flash for the past 2 weeks and have been unable to access the option to enable pressure sensitivity for my wacom tablet. I have tried resizing the windows and restarting flash and i have had no luck

That's probably a driver issue and not Flash. try reinstalling your driver, or maybe go to the previous one instead. Also there is a thing called the Feel it driver on Wacom's site that might work for you.

Other LEAP upgrade options besides PEAP and EAP-FAST?

Currently I'm using LEAP for authentication on my AP's at roughly 200 remote locations, with about 6 AP's per site. These are performing local Radius authentication on the AP's themselves. We are using non-dictionary passwords, so I'm not too worried about a ASLEAP attack. However, I've been asked to look into other alternatives besides LEAP for security.
Here's the problem.... there is no way my company will pay for a Radius server at each individual location. As both PEAP and EAP-FAST seem to require an actual Radius server as opposed to an AP acting as one, to use either means authentication would have to happen back to the central office servers over our WAN. That is going to generate an unacceptable amount of WAN traffic, as well as leave us stranded should the WAN connection go down, as happens to at least one site once a week or so. Do I have any other options, are are they superior to my current LEAP setup?

A comparable system might be to use WPA - PSK (Pre-Shared Key) w/ TKIP.
TKIP will keep the key rotation, and if you start with a strong PSK, you should be OK. WPA - PSK doesn't need a RADIUS server or certificates to work.
Pre-shared keys could conceivably be defeated by a brute force attack, but you can control that aspect somewhat with a lockout after X number of failed attempts.
You could also toss on some MAC filtering but, depending on your user base, it can be an administrative nightmare.
If all of your remote sites are tied back to your home network, you could try a central RADIUS, and local Certificate Authority (both can be on an existing WIN2K or better server) at the home office, then use the remote RADIUS on the AP to proxy the requests back to the home office.
There are a couple approaches depending on your specific environment. Without a CA and RADIUS server (that supports certificates - I don't think the AP RADIUS does), your options are fairly limited. LEAP and WPA-PSK are probably as good as you're like to get.
Good Luck
Scott

Other Dynamics brush option in CS 5

Similar Messages

Maybe you are looking for