Other Final Cut Pro Discussion Sites

I'm trying to find other Final Cut Pro discussion sites similar to this one. I know that 2-pop.com is a good one. Does anyone know any others?

http://proapptips.com
http://forums.creativecow.net

Similar Messages

  • Log and transfer in Final Cut Pro (final cut pro discussion wouldnt open)

    Hello, I am having trouble importing files from my HVX200a into FCP. In the log and transfer window everything plays fine and in realtime. However, after I add them to my Queue and try to play them back in the preview window of FCP they play back in slow motion and half of the clip has disappeared. Some of the clips play back fine, others do what I just described...any ideas? Thanks!
    -George

    #36 - One or More P2 files failed to import.
    Shane's Stock Answer #36 - "One or more clips failed to import..."
    In the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
    ALSO...make sure your file names aren't too long. Try shortening them and see if that works.
    ALSO make sure that the folders that contain the CONTENTS folder doesn't have any odd characters like /!@#$%^&*()?.
    Shane

  • Tiger with Final Cut Pro

    This is my first time posting to the Final Cut Pro discussions.
    I am thinking of upgrading to Tiger. Are there any software conflicts with FCP 4.5, since I am trying to be careful on whether or not to update the OS.

    Yes, many, many problems.
    No, none at all.
    Read through the forums and you will find many posts from each camp.
    Ask yourself - What is Tiger going to do that you NEED to do that Panther can't do?
    If you really, really need Tiger, you might as well as ahead and do FCP5 at the same time.
    Cheers,
    x

  • Apple Audio Filters in Final Cut Pro

    I'm posting this question here because I didn't receive any responses in the Final Cut Pro message area, and I thought given the nature of the questions, audiofiles that read this area might have an answer.
    In Final Cut Pro there are two folders of audio filters, one called APPLE and the other FINAL CUT PRO.
    I fully realize none of these filters have the power of programs like SOUNDTRACK PRO.
    However, I'm in a situation where I need to document what the filters do. I've already found all the material I need for the FINAL CUT PRO filters. However, I can't find any information anywhere on the APPLE category of filters.
    My questions:
    #1 - Does anybody know why the APPLE audio filters are seperated out from the Final Cut Pro filters? How are they different generally?
    #2 - Does anybody know where I can find documentation on what each of the APPLE category of audio filters do? I can't find it in the Final Cut Pro Manuals or Diane Weyland books. I found some Ken Stone tutorials on line, but they don't address the APPLE filters.
    #3 - And many of the APPLE audio filters seem to be near duplicates in the Final Cut Pro audio filters, so what's the point in having two versions?
    Any info at all or a direction to look would be appreciated.
    Thanks so much.
    Message was edited by: brvideo

    As of Leopard I was surprised to find that the Apple system plug-ins, and those that are supplied with the FCP suite are not AU plug-ins in the old sense of what a plug-in used to be. They no longer exist as a file anywhere in the system as they used to. Audio Unit plug ins formerly used to exist in Library/Audio/Plug ins/Components - now they are build into the Leopard operating system.
    Any third party plug-in you purchase will still be installed in the "old" way.
    Sorry, I can't remember where that documentation exists. Probably in the developer docs somewhere.

  • Final cut pro make Mac pro kernel panic with RAM from other manufacturers

    hi all
    if i installed RAM For mac Pro from 667MHz DDR2 fully buffered ECC RAM from other manufacturers
    final cut pro (just final cut)
    make the machine kernel panic messege
    all programs working good (like adobe and other compositing program) but final cut freez the machine and kernel panic
    the standard RAMs good

    Ahmed:
    You can try visiting/searching the Expanding your Power Mac G5 forum. You'll find A LOT of help about RAM issues.
    Any RAM brand must work but you maust be sure it follows the MAc specs. Some brand sites have good product locator by computer manufacturer/model (i.e. Kingston and Crucial). In fact there is no Apple branded RAM, they use a lot of different ones.
    Inside FCP settings you'll find how to manage the memory that the program use, but that settings depends on the total quantity of memory you have installed, and you didn't post that information.
      Alberto

  • Final Cut Pro X and Mac Caption Site Licenses

    How much does it cost for a site license for Final Cut Pro X and Mac Caption?  I need to have one computer going for production and one for training someone.  Is there 501C-3 pricing available?

    FCP X can be used on as many Macs as you own.  Be sure each is logged in to your iTunes/App Store account.  So for two Macs that you own, you can download to both, only pay for one.
    There is a bulk license deal for it, but you'd need to be running 10+ Macs before you'd get any discount or anything.
    Mac Caption is an issue you'll have to take up with them.

  • Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash,

    Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash.

    If your working on an external hard drive, just drag/drop back in the Final Cut Projects folder, and re-open FCPX

  • Provide Final Cut Pro Feedback... points to an outdated site. It doesn't even list Final Cut Pro X!!!

    Provide Final Cut Pro Feedback...
    Points to an outdated site. It doesn't even list Final Cut Pro X!!!
    How do I suppose to report bugs?

    I did that, but it's a kind of frustrating to go to that option in the brand new fcpx and find that support page doesn't know there is a new version of FCP.
    BTW, do you know how to stay logged in here? I have to enter my user and password every time I open this page
    Thanks!

  • Well if apple put's this on there site! Mac OS X Lion Available in July from Mac App Store...why not also comming in june final cut pro x..

    ...well if apple put's this on there site! Mac OS X Lion Available in July from Mac App Store...why not also comming in june final cut pro x..and tell us a little more about it...

    Because FCPX effects a small percentage of the Mac user base.

  • HT5149 Hi, I still have problems reinstalling Final Cut Pro even though I followed these steps. Didn´t find "com.apple.motionapp.plist" to remove though, but the others I found. Reason why I have to reinstall is because I have repaired my Macbook Pro hard

    Hi, I still have problems reinstalling Final Cut Pro even though I followed these steps.
    Reason why I have to reinstall is because I have repaired my Macbook Pro hard drive at a Mac Authorized Repair.
    Short history of repair and my Final Cut Pro installation:
    1. Macbook Pro stopped working, sendt it for repair. Had the Final Cut Pro installed,
    2. Desided to try a MiniMac and recovered my backup with Time Machine, got the Final Cut Pro working.
    3. Got my Macbook Pro back from repair, did backup on this one as well. But this time only the files not the Applications.
    4. Removed the files as mentioned in HT5149. Didn´t find "com.apple.motionapp.plist" to remove though, but the others I found.
    5. When I try to install Final Cut Pro from App Store, it downloads the application as planned. But after download it won´t show in the Application folder nor in the downloads folder, nor will it start an installation prosess. If I pause the installation in App Store, I can see the Final Cut Pro icon in my Dock. (But, as mentioned, after installation it won´t show neither here or in the Applications folder).
    Any suggestions on what I should try now?
    Thanks for any reply, I´m in deep water here...

    Sounds like there is a file you're not getting.  Never do a removal manually.  It's so time consuming and a pain.  There's a very easy and fast way to do this, safely, properly.
    Get the free "Final Cut Remover" app from Digital Rebellion (dot com), use this to remove FCP X.
    Reboot the Mac.
    Download from scratch.
    If you're not seeing FCP X in your app folder, run Disk Utility to Repair all drives.
    If that doesn't help, try running Disk Warrior from Altsoft to repair the directories on all drives.

  • Final Cut Pro HD 4.5 freezes on output to VHS and other weridness!!!

    Gents and Ladies,
    First time poster...I feel all warm and fuzzy on the inside...really I do...
    My Brand New G5 dual 2.7GHz blah blah blah is freezing up on out put to VHS. I am using a JVC SR-VS30 Mini-DV/SVHS dual deck.
    Why VHS? I work for a school district and that's the cheapest stock possible.
    Anyway... the board meeting tape I output last night all the sudden freezes after like 45 minutes of recording. It litterally screwed up right after I left the office last night. I actually stayed with it for 45 minutes and "held its hand" to make sure everything went along alright. Right after it left..."feeeze frame, freeze frame...now freeze..du du du na na na"...did you ever hear that song?
    Anyway...to make a long story short...while watching the tape this morning...it was just stuck for like an hour like that. I turned it off after 30 seconds but after fast fwd'n the tape...it just kept recording like that.
    Totally unbelieveable. I love how Macs need to rest before it starts to work. It grabs a cup of Joe and a bagel...reads the morning paper...returns a few emails...then it MIGHT be ready to work...if your lucky. And then...if your not looking...it'll randomly fail. I love that...so..what I do...is I try to trick it into working for me...yeah...I trick it...:)
    Anyway...so I want to run Disk Warrior. My screen saver is turned off, my hard drives don't go to sleep, all the things you might think would cause it to go off line over the course of 3 hours... I have turned off. It would seem...at least to me...that when it tries to Auto Save the glitch kicks in.
    The other thing is that I record the meetings on an NNovia Quick Capture HD DVR via Firewire. It has worked many times before...flawlessly. The copy is fine...the file in Final Cut is fine. It even previews to a TV monitor nicely...but on output...its choking on the toothpaste when rinsing.
    JB
    G5 Dual 2.7ghz H2o cooled   Mac OS X (10.4.4)   Double dipping on RAM

    O.K. cool.
    I did change Auto Save before any of this even happens. I made all these very changes on my previous dual 2.0 G5. That machine...although much slower...always worked...never faultered...very dependable. Quite honestly the best Mac I ever worked on...until new versions of stuff came out and ruined all my fun.
    I have changed all the pertinant settings...at least I thought.
    Do any of you think I should ask for the upgrade to 5.0? Does it have any fixes in it that make it worth it? The new machine is what has made the bugs pop up. For a while it wasn't even recognizing my deck then one day it started working. Any thoughts on that... let me know. I am not a huge fan of the Dual JVC deck but it has worked pretty well. Now I use this DVR and it works really well for long running board meetings. At least VHS does what its told...:) With DV you always got to wonder if you've dropped some frames. Even if I am recording to a Hard Drive.
    Before this gig I worked on the "last run" dual something G4 Quicksilver's and they all ran horrible. FCP3 and bugs everywhere. After that disaster I then jumped ship all together to a Canopus Premiere Pro system on a DVStorm2 Pro + card. That is a nice system. Great Chroma Key stuff. Now at this gig I have been working in Mac again. I was hugely surprised by how well the G5 performed. It did get a little slow for me eventually. Honestly my single P4 in combonation with the Canopus Realtime Preview Board really beat it up quite badly. Even that still had to render in the end but at least I could see everything while I was working. Render time was pretty fast in the end too. I think that has been my favorite DV Editing solution on PC.
    I really like Final Cut Pro. I think it quick and dirty...just the way I like it. I started out learning on Avid and if the company I worked for used it...I would prefer that truthfully but I have been riding FCP for 3 years and counting and every place I work at is Mac so...I am totally on this boat.
    Any opinions on the Intel stuff yet? I would be interested in perf as I would like to get a Mac system at home and sell my Canopus rig...all thought I do love it so.
    BTW...no...no error messages at all...
    ...and I would've styaed with it last night if I didn't have to finally leave after another 10 hour day...tonight I have a 2 hour video after work and then Sat/Sun we have a huge music festival and that will 2 12hr days...so...if I didn't need sleep...I would'e been able to stay some more...
    ;)~
    ...Oh and I have a 250 GB Serial ATA system drive and a 250 GB A/V Storage drive.
    FCP stuff on A/V Drive
    iMovie/iDVD stuff on system
    ...has always seemed to run better like this.
    Many thanks for the ideas and for any future input.
    JB

  • Is it possible to share documents from Final cut pro x on my other mac?

    is it possible to share documents from Final cut pro x on my other mac?

    Yes, use SugarSync, multiple users can open the file at the same time if required.

  • Can final cut pro x and soundtrack pro 3 share projects with each other?

    can they? or are we, for now, restricted with final cut pro x in our sound editing?

    i am buying a mbox and getting into protools and ...after effects

  • How can I install Final Cut Pro 10.0.5 in other Mac?

    Hi,
    I have the Final Cut Pro 10.0.5 in a Mac, and I would like to install it in another one. But I can´t find the way to do it.
    Thank for your answers

    JJust copy it from one machine to the other on a drive. Don't forget to download the additional content.

  • I use Final Cut Pro X to make YouTube videos.  The sound is great when I watch the videos on certain computers, but muffled on others.  How do I fix this?

    I use Final Cut Pro X to make YouTube videos.  The sound is great when I watch the videos on certain computers, but muffled on others.  How do I fix this?

    You don't. You can't control how other computers or browsers play back the footage.  The best you can do is export a master file that plays great on your computer.  What youTube does with it, or how other computers play it back is out of your hands.
    Just like me with broadcast TV shows.  I deliver the most pristine version I can to the network. But then they convert it to a digital file that they then beam out to cable and satellite providers, who then compress it again to play on their systems. And then it arrives at grandma's house and plays on her TV. I have no control how my grandma receives the signal, nor how her TV is set up.  Unless I am nice and tweak things when I go visit. But I can't do this at every house that might want to watch my show.

Maybe you are looking for