Other Management reports

Hi,
Are "Active Users" and "Active Responsibility" reports good to submit to management for review?
I am thinking if they need periodic check to remove some users which are not employed already, or
have transferred to another section.
What other reports(in concurrent programs) can you suggest please, that you think are important to the bosses.
Thanks a lot
Ms K

Hi Msk;
Any reports will do as long as you think its good to the boss. I am in a panic mode now huhuhuh, I still can not produce reports for EBS. He just tell me any reports that shows status of EBS.Why you dont give him screen shoot of OAM >> Applications Dashboard page? or you can give him useage of OS screen shoot, You can also give him some Db report by using AWR-ASH etc. (if you have lower version of 10g check Oracle Applications and StatsPack [ID 153507.1])
How do I list of the concurrent programs "title" again? Using tables from the database side, so I can list all the reports.Try to run this:
select a.* , b.*
from FND_CONCURRENT_PROGRAMS a,FND_CONCURRENT_PROGRAMS_TL b
where a.CONCURRENT_PROGRAM_ID=b.CONCURRENT_PROGRAM_ID
and b.LANGUAGE='US'
Regard
Helios

Similar Messages

  • GRC 5.3 - Management Report Error: Cannot assign an empty string to host..

    Good day Kiran Kandepalli and Others.
    I have successfully executed the background jobs -
    Full User, Role, Profile Synchronization & a
    Full Batch Risk Analysis
    When I run the Management Reports I receive the following error -
    Error while executing the Job:Cannot assign an empty string to host variable 10.
    Has anybody had this error message before?
    When I check table VIRSA_CC_PRMVL, variable 10 is set to No in Nullable collumn.

    Hi Sahad,
    Thanks for your response.  I have checked the usr02 table and logs and do not see any empty fields or strings.  This process worked for 5.2 but fails in 5.3.  Here is the excerpt from the log for the Management Report run.  It seems to fail consistenly at a certain point.  If I knew what the batch job was looking for in host variable 10 I might be able to resolve the problem.  It seems to fail when it starts to report on users.
    Thanks.
    Dan.
    INFO: -
    Scheduling Job =>935----
    Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.BgJob run
    INFO: --- Starting Job ID:935 (RISK_ANALYSIS_BATCH) - tst
    Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.BgJob setStatus
    INFO: Job ID: 935 Status: Running
    Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.BgJob findJobHistory
    FINEST: --- @@@@@@@@@@@ Find the Job History -
    1
    Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
    FINEST: --- @@@@@@@@@@@ Updating the Job History -
    1@@Msg is tst started :threadid: 0
    Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
    INFO: -
    Background Job History: job id=935, status=1, message=tst started :threadid: 0
    Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis performBatchSyncAndAnalysis
    INFO: --- Batch Sync/Analysis/Mgmt Report started ---
    Jan 23, 2009 8:04:16 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis runBkgMgmReport
    INFO: --- Running the Background Management Report -
    Jan 23, 2009 8:04:39 AM com.virsa.cc.xsys.mgmbground.dao.MgmStats execute
    INFO: Start insert int cc_mgriskd all violations.... 1232726679108
    Jan 23, 2009 8:04:49 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis runBkgMgmReport
    WARNING: Exception in Management Report Job: Cannot assign an empty string to host variable 10.
    com.sap.sql.log.OpenSQLException: Cannot assign an empty string to host variable 10.
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
         at com.sap.sql.types.VarcharResultColumn.setString(VarcharResultColumn.java:57)
         at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:511)
         at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setString(PreparedStatementWrapper.java:355)
         at com.virsa.cc.xsys.mgmbground.dao.MgmStats.execute(MgmStats.java:314)
         at com.virsa.cc.xsys.bg.BatchRiskAnalysis.runBkgMgmReport(BatchRiskAnalysis.java:1182)
         at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1430)
         at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
         at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
         at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
         at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
         at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
         at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
         at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Jan 23, 2009 8:04:49 AM com.virsa.cc.xsys.bg.BgJob run
    WARNING: *** Job Exception: Cannot assign an empty string to host variable 10.
    com.sap.sql.log.OpenSQLException: Cannot assign an empty string to host variable 10.
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
         at com.sap.sql.types.VarcharResultColumn.setString(VarcharResultColumn.java:57)
         at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:511)
         at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setString(PreparedStatementWrapper.java:355)
         at com.virsa.cc.xsys.mgmbground.dao.MgmStats.execute(MgmStats.java:314)
         at com.virsa.cc.xsys.bg.BatchRiskAnalysis.runBkgMgmReport(BatchRiskAnalysis.java:1182)
         at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1430)
         at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
         at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
         at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
         at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
         at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
         at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
         at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Jan 23, 2009 8:04:49 AM com.virsa.cc.xsys.bg.BgJob setStatus
    INFO: Job ID: 935 Status: Error
    Jan 23, 2009 8:04:49 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
    FINEST: --- @@@@@@@@@@@ Updating the Job History -
    2@@Msg is Error while executing the Job:Cannot assign an empty string to host variable 10.
    Jan 23, 2009 8:04:49 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
    INFO: -
    Background Job History: job id=935, status=2, message=Error while executing the Job:Cannot assign an empty string to host variable 10.
    Jan 23, 2009 8:04:49 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
    INFO: -
    Complted Job =>935----

  • Management Report - Cannot assign an empty string to host variable 10

    We ran a Management Report for the first time after completing the User/Role/Profile Full Sync and the user/Role/Profile Batch Risk Analysis.  The job failed with the following error:
    Oct 16, 2008 12:13:29 PM com.virsa.cc.xsys.bg.BatchRiskAnalysis runBkgMgmReport
    WARNING: Exception in Management Report Job: Cannot assign an empty string to host variable 10.
    com.sap.sql.log.OpenSQLException: Cannot assign an empty string to host variable 10.
    We are on GRC 5.3 support pack 4.  Has anybody encountered this error? What does host variable 10 refer to?

    I checked our USOBT_C table and we have a lot of empty values. If this is allowed to be empty in SAP and this is the table that is uploaded into CC, why would all the fields in CC tables then be defined as NOT NULL?  We suspect that since we had uploaded USOBT_C under 5.2 and if this had been an issue before, it may have been corrected when we upgraded to 5.3 but then the old data is still in our system. Is there an easy way to get around or correct this?
    Thanks.

  • PI 2.0 Manager Report for Alarm Assignments and Acknowledgements

    Is there a Prime Infrastructure 2.0 manager report that shows daily alarms, who the alarms were assigned to and when they were acknowledged? I can't find anything on the tool or in the documentation and this is required to prove compliance in the financial industry.
    Thanks

    There is no PI 2.0 release yet.
    LMS 4.2 can do this. Reference.
    I am curious - can you cite the compliance regulation that requires this feature?

  • Error opening a Manage Report template with Formulas and Summation

    Hi Expert,
    My j2ee web application is setup is such a way that when there is NO connectivity to the Crystal Report Server XI, it will use the Crystal Report for Eclipse functionality and opening report templates located in the relative path - This works fine.
    But when there is a connectivity to the CMS Server, I have this error when opening a manage report in Crystal Report Server XI that contains formulas and summations. But for other reports like chart and listings no problem.
    This code triggers the error:
    ReportClientDocument clientDoc = reportAppFactory.openDocument(infoObject,0, java.util.Locale.US);
    I found out there's a conflict between CR libraries  for Eclipse and libraries for RAS Enterprise Server XI.
    How can I solve this issue so that I can support the two scenarios - with or without CMS connectivity, I can still view reports.
    Error Stack Trace:
    com.crystaldecisions.sdk.occa.managedreports.ras.internal.a: Cannot open report document. - Unable to connect to the server: gdcextrp.RAS.rptappserver. cause:com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: gdcextrp.RAS.rptappserver.-- Error code:-2147467259 Error code name:failed detail:Cannot open report document. - Unable to connect to the server: gdcextrp.RAS.rptappserver. The exception originally thrown was com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Unable to connect to the server: gdcextrp.RAS.rptappserver.-- Error code:-2147467259 Error code name:failed at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.a(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source) at com.crystaldecisions.sdk.occa.managedreports.ras.internal.RASReportAppFactory.openDocument(Unknown Source)
    Hoping for your answers.
    Regards,
    Rulix Batistil

    You must isolate the CR4E and RAS SDK jars using separate classloaders - simplest is have separate apps, if rolling your own class loaders is out of project scope.
    They do not work together.
    Sincerely,
    Ted Ueda

  • Device Manager reported driver missing for Officejet 7310 printer

    I used the full-feature install software downloaded from HP site to setup an Officejet 7310 printer on a Lenovo T540p laptop with Windows 8.1 64-bit OS.  The install and the printer appear to work correctly as I can print and I can also scan from the HP Solution Center utility.  However, the Device Manager reports two errors/anomolies as follows.
    Under the "Multifunction adapters" entry the Officejet 7300 series Properties shows the Device Status as:
    This device is disabled. (Code 22)
    Click Enable Device to enable this device.
    Under the "Other devices" entry theOfficejet 7300 series Properties shows the Device Status as:
    The drivers for this device are not installed. (Code 28)
    There are no compatible drivers for this device.
    To find a driver for this device, click Update Driver.
    I find this a bit baffling as I believe the install software is supposed to include the driver(s), plus the printer seems to function (which could be due to default Microsoft drivers).
    Any thoughts on how things got in this state and how to recover would be deeply appreciated as I prefer to not "ignore" the error messages.
    Thanks,
    Glenn
    This question was solved.
    View Solution.

    Yes I was able to remove the USB instance and rename the network-connected printer instance as the sole printer.  I thought that should work, but I was a bit paranoid given the other weird things that happened with the package install.
    I'm good to go; thanks again.
    Glenn

  • Batch Management report Issue.

    Hi Friends,
    I have a question on batch management report, for detailed information please see the steps below
    Step 1 : I have material X and Y created with class u2018XYZu2019, and characteristic value temperature 10 u2013 100 c
    Step 2 : I have done Goods receipt for both the material
    Material document     Material     Batch Number     Characteristic Value
    123          X     TEMP1          10 C
    124          X     TEMP2          10 C
    125          Y     TEMP3          10 C
    126          X     TEMP4          20 C
    127          Y     TEMP5          20 C
    I have two questions now?
    1.     Is there any report to find out the list of materials with characteristic value 10 C?
    2.     is there any report to find out list of batches for 10 C?
    Thanks and Regards,
    Chalaa

    There is no standard report for your requiremet, go for ABAP development.

  • Urgent please help: what is the table name for cash management reports?

    I am wondering what the table name for cash management reports is. I am trying to figure out then if I have any missing.
    Please help.

    I checked MSEG table. But, I didn't find any field for date.
    Can you tell me field name.
    Regards
    Siva

  • Tables used for Devloping Customer Reports Of solution manager report

    Dear All,
    Kindkly Suggest Some Tables,which i can use in developing the solution manager report.
    key fields i m using From results of Tcode      CRM_DNO_MONITOR
    ID
    PERSON RESPONSIBLE
    TEAM SUPPORT
    POSTING DATE
    PRIORITY
    THANKS IN ADVANCE.

    Update my question my deadline is up to complete,
    Regards,
    Thiru. R

  • Oracle Reports - Distributing Multiple Reports in a Management Report

    Hi,
    I am new to Oracle Reports and would sincerely appreciate some guidance.
    Requirement.
    I plan on using Oracle Reports to write multiple reports containing Text, Graphs, Crosstabs, Tables etc. There are 3 developers and each will be developing a number of reports.
    At the end of each month, we need to run all the reports and publish it into a Management Report Pack.
    This Management Report Pack must contain a table of contents with the names of the different reports and page numbers. Each Report in the Report pack needs to have a header, footer and page number.
    The number of reports will change on a monthly basis so the page numbering will not be specific to a report.
    Summary,
    3 developers writing multiple reports
    All reports must be run and then printed out in a specific order.
    Table of Contents page with page numbering for each report.
    How can we do this with Oracle Reports?
    Is it possible, and if so, how?
    What is involved and what is required?
    Your assistance is highly appreciated.
    Thank you.

    You should be creating a universe using the table with filter utilizing a column which accepts a parameter value of language and shows the data in that specific language. This concept is already used in SAP standard audit universe which accepts language for any query and shows the data in that language.. The logic for the derived column for the table should look something like below Table.LANGUAGE = @Prompt(Select language)

  • File Manager Reported and Error

    I am trying to save a file and I keep getting a message :While attempting to access "-TemporarySaveFile-" the File Manager reported an error.
    How can I save the file...or do I have to restart the computer and lose everything?

    What program? I don't think I've ever seen the term "File Manager" used wrt Mac OS except in comparing Finder to other OS or third-party file managers.

  • Cash Management Report Requirement

    Hello All
    We have a requirement where  the users want to track thier receivables and forecast cash.
    They would like to see someting like
    Customer.... due before period, due during period, due after period,  Sales order due before period, during period and after period.
    Can anyone please suggest the best way to proceed for this kind of reporting.
    Thanks
    Sanjeev

    Hi Sanjeev,
    standard Cash Management reports that SAP offers are transactions FF7A (Cash positions) and FF7B (Liquidity forecast). Apart from it you can create own reports using transaction TRM0.
    BR, Tomislav

  • User submitted Credit Card Historical Transactions Management Report by mis

    A user has submitted the 'Credit Card Historical Transactions Management Report' by mistake. They have noticed that as a result of this, the concurrent request appears to have deactivated all iExpense unused transactions up to and including the date that they ran the program which results in a number of cardholders affected are unable to see or acquit their Visa transactions.
    We believe this process can be reversed using the same report and choosing "activate transactions" however we just need confirmation that our
    assumption is correct and that the request can be reversed. Can anyone please confirm if this can be reversed.
    Thanks
    Lee

    I created a SR with Oracle to confirm this and they said you can run this program. I just wanted to make sure program is safe to run for clearing out outstanding charges for termed employee.If Oracle support confirmed that you can run the program, then I would say go with what they said :)
    Thanks,
    Hussein

  • Management report - Role analysis

    Hi guys,
    So here's my issue, I inadvertently scheduled a role analysis without specifying the project roles which are about 200 +.  Thus, role analysis under the management report view constantly shows the  results of the analysis of about 2000 + roles which is a combination of both SAP delivered roles and project roles. Every subsequent batch and full syncs I've scheduled seemingly gets aggregated with the initial sync which has all the SAP delivered roles.
    Question.
    1. I understand I have to purge the database at the backend. The basis team strongly advices against this. Can I possibly purge the role analysis in the CC front end? What are my options here? I only want to see the role analysis of our 200 + project developed roles.

    Dear Adewale,
    I understand your requirement, please check the following.
    There are two ways to see Role based Risk Analysis, and both depends upon your requirements.
    1) Suppose, You have a requirement to see consolidated Role based Risk Analysis of a particular system. That means you want to generate a report for all the roles and want to see which roles are violating, mitigated, critical, high, medium and low in your system. For this you can go to Informer tab and generate Role based Risk Analysis Report.
    In this report the advantage is that you get a pie chart and bar graph. But you can not generate reports on the basis of some particular roles, because there is no such functionality provided in CC 5.2
    2) In other case if you wish to generate a Role based Risk Analysis report by specifying a condition like (z*), Here you also have option to select Report Type, risk Level etc  but yes, there is no functionality to see the result in graphs or charts in CC 5.2
    So in both ways your requirement to generate project roles risk analysis report in graph format can not be achieved. For this you only have two options.
    1. Raise an enhancement request to SAP Support.
    2. To go with the second option mentioned above, select report type to be management summary and export the results to excel and generate graphs manually.
    I understand this is painful.
    Best Regards,
    Amol Bharti

  • Network DR test causes Exchange DAG network to fail (Failover Cluster Manager reports comms errors)

    We have a DAG configured between 2 mailbox servers, one in each of our main data centres. Our comms team recently performed a DR test between our 2 data centres, switiching from the main production link to the backup link. During this outage the Failover
    Cluster Manager reported errors, with each mailbox server reporting the other as uncontactable. The Events that were logged include the following:
    Isatap interface isatap.{02ADE20A-D5D4-437F-AD00-E6601F7E7A9D} is no longer active. (EventID 4201)
    Cluster node 'MAILBOX_SERVER' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the
    Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is
    connected such as hubs, switches, or bridges. (EventID 1135)
    File share witness resource 'File Share Witness (\\WITNESS_SERVER\SHARE_NAME)' failed to arbitrate for the file share '\\WITNESS_SERVER\SHARE_NAME'. Please ensure that file share '\\WITNESS_SERVER\SHARE_NAME' exists and is accessible by the cluster. (EventID
    1564)
    Cluster resource 'File Share Witness (\\\WITNESS_SERVER\SHARE_NAME)' in clustered service or application 'Cluster Group' failed. (EventID 1069)
    The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk. Run the Validate a Configuration wizard to check your network
    configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges. (EventID 1177)
    The Cluster Service service terminated with service-specific error A quorum of cluster nodes was not present to form a cluster. (EventID 7024)
    The Microsoft Exchange Information Store service terminated unexpectedly.  It has done this 1 time(s).  The following corrective action will be taken in 5000 milliseconds: Restart the service. (EventID 7031)
    Looking at the Cluster Events in the Failover Cluster Manager Snap-In i see a heap of Event ID 47 (cannot activate the DAG databases as the server is not up according to Windows Failover Cluster Service) and:
    Node status could not be recorded. This could prevent some network failure logic from functioning correctly. NodeStatus:IsHealthy=True,HasADAccess=True,ClusterErrorOverrideFalse,LastUpdate=5/2/2011 8:25:42 AMUTC Failure:An Active Manager operation failed.
    Error: An error occurred while attempting a cluster operation. Error: Cluster API '"ClusterRegSetValue() failed with 0x6be. Error: The remote procedure call failed"' failed.. (EventID 184)
    Forcefully dismounting all the locally mounted databases on server 'BACKUP_MAILBOX_SERVER. (EventID 307).
    Our Comms team doesn't believe it is a comms issue as they did not log any network communication errors between the servers in the two sites (using icmp). So if it is not a comms issue, how can I configure the Failover Cluster Manager to be resilient to
    this type of network failover event.
    Thanks
    Dan

    Isn't it also true that in a stretched DAG with even numbered nodes, the PAM needs to be in the same site as the active DAG node?  If the connection between both nodes goes down, and the PAM is in the "passive" site, the primary node will
    dismount the databases since it can't check with the PAM to make sure its safe for it to be up.  
    In a even-numbered node stretched DAG, the PAM changes to the DR/passive site everytime a failover occurs, but doesn't automatically switch back when you reactivate the primary node.

Maybe you are looking for

  • External DVD Burner

    I'd like to get an external dvd burner for my iBook. I'd like to be able to use it with iDVD. Is firewire better than USB? USB would make it compatible with our pc. Does anyone have any recommendations for a burner and other software I might need to

  • Brother printer misses A4 paper vertical or horizontal, using Mac OS 10.6.8 & 10.8.8

    When printing from PS CS5.1 (ver. 12.1), I can see the print dialog for Brother printers on my Mac (OS 10.6.8 or 10.8.8). Papers were printed with misses that image in horizontal A4, although I had set image in vertical A4. I can see a fit of image t

  • HT1689 I bought an app and I got charged twice? Can I get the balance back?

    I lost almost 10$ from my account. Actually it's for my daughter.

  • Upgraded from 10.6 to 10.6.2, network stopped working on an iMac.

    Went to the Apple store yesterday, bought Snow Leopard. Installed it, everything seemed to work fine at 10.6.0. Did Software Update, it said there was a 10.6.2 update (guess it combined 10.6.1 and 10.6.2 into one?), so I downloaded it, it installed a

  • Dynamic vi on tab control

    Hello,               I have a tab.vi which has a tabcontrol. The tab control has 3 tabs. Only tab1 is visible intially and the other two tab's are hidden. Now lets say we are in tab1 and user presses 'Add' button. Then tab2 becomes visible. If user p