"other" memory has 7GB worth in it

My ipod touch for whatever reason continually increases the "other memory" and its up to almost 7gb. it is taking up all the space left on my ipod so what is it and how do i get rid of it?

An "other" that large usually indicates that the "other" includes corrupted files. Usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Backing up, updating, and restoring iOS software

Similar Messages

I purchased 2 ipad mini's at Xmas, I then sync'd them with itunes on my pc, and put basically the same apps on each of them. Both are 16gb units. One of them is full ( with over 9gb of "other" memory) the ipad still has 10gb left.What could be causing thi

I purchased 2 ipad mini's at Xmas, I then sync'd them with itunes on my pc, and put basically the same apps on each of them. Both are 16gb units. One of them is full ( with over 9gb of "other" memory) the ipad still has 10gb left.What could be causing this "other" storage

How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
 Cheers, Tom

The "Other" memory on my ipad2 keeps growing. What is in the other category? It is now up to 3GB

When synching my iPad2 I am trying to stay within the 32GB of memory but this is filling up fast. I have a lot of music and pictures...
I was wondering about the 3GB of "Other" that shows up as yellow on the usage bar. What is in the "Other" category that I could manage?
Is it files used by various apps? Or ??
Appreciate any feedback on this.
Thanks

Hi King_Pinguin,
I have the same issue, my other category has grown to 7GB. Deleted the cache, cookies, but that removed 500kB. My books are 0. I am going app by app to see if I can delete data, but it is not clear where the problem is. Removed all games - didn't impact the other category at all. Any advice? Do I just totally remove everything, and then resync everything after that? Any advice welcome, right now I can barely use my iPad.

2 questions; how to erase "other memory" on iphone 5 and how to sync to a new computer

Apple support is failing to help my issues so I thought its best to turn to the community. OK so I've talked to Apple before about my "other memory" and I performed a soft reset on my phone and it decreased other memory by maybe a gig. A month later now its higher than it was before at over 5.6 gigs, any way how to make it as little as possible?
Also I just got a new macbook pro and I use to sync my iphone 5 to my macbook (2008), how do I make my macbook pro my primary itunes and still keep all my info on my phone? My new macbook pro itunes says its backed up, but when I plug it in it won't sync any new songs or app data to my itunes, etc.
Any help with these issues will much be appreciated!!

"Other" is all of the data for all of the built in apps. If you delete its contents all of your built in app data will disappear. Some of what is contained in other:
email messages and attachments
Reminders
Calendar entries
Contacts
Text messages
MMS messages and attachments
Genius data
Music cover art
Operating system settings
Safari cache
bookmarks
Game Center status
Music catalog
Probably a few I've missed. There was a problem in an earlier version where deleted MMS messages left behind their attachments, but that has been fixed as of 6.1. Some people suggest deleting your music on the phone. DON'T DO IT! The reason that deleting music recovers some Other space is because it deletes cover art. But is also screws up your music, which will no longer play correctly.
You will find posts from people who said they recovered over 1 GB of space by just deleting old text messages.
If you want Other to be smaller you will have to keep less data on your phone; delete old MMS and texts, delete old email (especially from the "deleted" folder), clear the cache, eliminate cover art.
Your Other is so large, however, that there may be corrupt data contained in it (unless you send a lot of MMS messages with large attachments). If this is the case you should restore the phone as New.
=====================
For your other question, the easiest way is to copy your iTunes library folder from the old computer to the new computer. For the hard way, see: Syncing to a "New" Computer or replacing a "crashed" Hard Drive

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared.

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared. I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
In checking the log files, here is the message repeated over and over....
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file'
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file' with userInfo = {
NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
NSSQLiteErrorDomain = 21;
Jul 4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
Jul 4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
Jul 4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Any ideas on what to do next?
I'm running and iMac 20-inch early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.4 (12E55)

Step 1
Quit Calendar. Triple-click the line below to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
Step 2
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Number of times main memory has been unloaded in last 24 hours "0"

Hello Experts,
I am getting error "BIA server is overloaded" in RSDDBIAMON2 tcode.
Description is below:
BIA server is overloaded
Message no. RSD_TREX154
Diagnosis
The SAP NetWeaver BI Accelerator server is overloaded. Either there has recently been a forced unload of the BIA main memory, ort he total volume of loaded data exceeds the limit of 50% of the available main memory.
Both these situations negatively impact the stability of the BIA server.
Procedure
You have two options:
Decrease the volume of data in the BIA: Delete BIA indexes that you do not currently need or that you do not urgently require.
Contact your BIA hardware partner and carry out a new sizing for the BIA hardware.
Procedure for System Administration
By default, this message only appears as a warning in processes that index large volumes of data in the BIA. You can use administration parameters to specify this warning as an error message as well. This causes all index processes to terminate if the error occurs.
To do this, execute program RSDDTREX_ADMIN_MAINTAIN with parameters Object= DONT_IGNORE_BIA_OVERLOAD, Value = X, and INSERT/UPDATE = X.
Diagnois says
1) The total volume of loaded data exceeds the limit of 50% of the available main memory,I have already checked the disk used for storing the indexes and it is not more than 50% of the BW Accelerator main memory.
2)There has recently been a forced unload of the BIA main memory: As per error details Number of times main memory has been unloaded in last 24 hours: '0' ie no unloaded had happened in last 24 hours.
Please help me how i can solve this erro as there is not unload happened and also disk usage under control.
Regards,
Akshay

hi,
1) You can check the traces via the trex standalone tool trexadmin or transaction TREXADMIN. You must provide more details to get an analyze. Was there running a lot of process chains at this time? Have you checked the memory monitoring of the BWA blades?
2) transaction TREXADMIN -> tab version..
You can try going through SAP notes which help with high memory issues.
Sometimes, the rfc server sometimes takes a lot of memory and doesn't free it afterwards.
Thanks,
Sheen

What takes up 'other' memory??

on the ipod's memory usage bar on itunes, it has 'audio' and 'other'
i have a lot of 'other' memory being taken up
what kind of files would be taking up this space?
how do i delete it?
all i have on my ipod is songs, so that would be the 'audio' memory?
i really need to get rid of the 'other' memory being used up!!

Other can be the file system, contacts etc. If a lot of space is being taken up try restoring your iPod, this will erase the hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation: Restoring iPod to Factory Settings with iTunes 7

IPod Touch, iOS6, "Other" memory increasing every sync?

I have noticed that since the "update" to 6.0, my iPod touch has an increasing amount of "other" memory with every sync. The amount of "other" increases by about 400 mb every time I sync it. Even when I synced it twice in a row with no new podcasts or anything at all that would have been different from the sync just performed.
I restored it from backup, and the "other" memory stayed the same. When it got up to 14 GB, I restored and set up as "new", and the "other" memory dropped back to normal, then immediately started increasing with each sync.
I de-selected the only 2 apps that have updated recently, the only thing I couldn't undo is iOS 6. Other than that, I have done nothing different than I've been doing for the 2+ years I've had it.
Is there something I have set wrong in the settings since it's a touch and not a phone? I didn't change anything when 6 was installed, should I?
I really don't want to have to restore this thing as "new" every month!

Thanks for your reply. I saw those threads and a few others when I searched earlier, but not the one about Safari. I don't use Safari often, but I will try clearing the cache. That's the only one of those things I haven't tried.
I wondered what the "other" was a long time ago, and looked it up. It was behaving normally until recently, after the iOS update, when it started gaining .2-.5 GB per sync. And restoring as "new" didn't stop that, it only reset the "other" to a normal size.
I mainly use this iPod for podcasts & mp3, and watching videos. A few other apps, nothing new added or changed that I could maybe think might be the cause.

Other memory how to remove

I have just upgraded the software on my iphpone 4 and spent ages trying to remove over 8gig of 'other' memory that arrived after the upgrade. I couldn't sync most stuff due to insufficiant memory
I have at last reduced it to .3 gig by unticking all but apps, syncing and then ticking other items (music, photes etc) then syncing again
What has caused this, is it an Apple bug? .

Good day all,
I have a 4S that had 5+G of "other" that I was trying to free up. I searched and searched, tried all the suggestions and had no success. I tried a full restore and freed up the memory but didn't want to loose all my settings, app folders, etc. After a process of elimination the solution that worked for me was to delete txt messages! When I went from the 3G to the 4S I restored from a back up. I've never delete any of my txt message history... so all that information, photos, videos, etc were being caried from one device to the other for like 3 years!
I started with a test. Pluged in my 4S, synced it. Registered 5.2GB of "other". I ejected the phone from itunes. I deleted my wifes txt message (with whom I txt the most). I plugged back in and "other" dropped down by an entire Gig!! So, I tried again with another that I txt often... and sure enough when down another Gig.
So, I decided to take the plug and start off fresh... I deleted ALL of my txt messages and my "other" memory went down to .52gigs!
This is why a FULL restore has been successful for those trying to clear out "other" memory. When you initiate a Full restore, you are cleaning out your entire memory of txt messages which includes large files of photos and videos!
So this is what worked for me folks! I hope it helps someone!

"Other memory'' increasing

"Other memory' increases in a short time up to fill the entire hard disk (iPhone 4S 16GB).

Some have stated that turning off itunes match has helped the. Do you have that on?

How to delet 'other' memory from iphone

My iphone works fine, but I have a problem with the memory of my 8gb phone, i have 2.2 gb of music and one app thats 9mb and when i try to download another app it says i do not have enough memories, i go to seetings to see whats wrong then it says thats 4.3 gb is other? How do I delet the other memory i am not using.

Good day all,
I have a 4S that had 5+G of "other" that I was trying to free up. I searched and searched, tried all the suggestions and had no success. I tried a full restore and freed up the memory but didn't want to loose all my settings, app folders, etc. After a process of elimination the solution that worked for me was to delete txt messages! When I went from the 3G to the 4S I restored from a back up. I've never delete any of my txt message history... so all that information, photos, videos, etc were being caried from one device to the other for like 3 years!
I started with a test. Pluged in my 4S, synced it. Registered 5.2GB of "other". I ejected the phone from itunes. I deleted my wifes txt message (with whom I txt the most). I plugged back in and "other" dropped down by an entire Gig!! So, I tried again with another that I txt often... and sure enough when down another Gig.
So, I decided to take the plug and start off fresh... I deleted ALL of my txt messages and my "other" memory went down to .52gigs!
This is why a FULL restore has been successful for those trying to clear out "other" memory. When you initiate a Full restore, you are cleaning out your entire memory of txt messages which includes large files of photos and videos!
So this is what worked for me folks! I hope it helps someone!

My iphone 5 has 7GB, went to apple store the guy said my backup that I was restoring from was corrupted so I have to restore it as a new phone wondering that if I do this and it does not work, will iTunes have my old backup saved?

My iphone 5 has 7GB, went to apple store the guy said my backup that I was restoring from was corrupted so I have to restore it as a new phone wondering that if I do this and it does not work, will iTunes have my old backup saved?

Yes, if you have been backing up on a regular basis.
If this is your first time backing up, then no.
you can check edit - preference - backup - see what is listed

App Download and "Other" Memory Usage

For a month or so I've noticed that my iPhone 5s "Other" memory was on the order of 6gb... Deleted texts and emails attempting to reduce that size, to no avail...
Today I noticed that an App (Numbers) that had begun to download from the App Store (about a month ago), had not finished (WiFi was required for the large download, but had been turned off and on several times, but not long enough for the download to complete). It wasn't obvious to be that Numbers hadn't finished downloading...
I deleted Numbers from the iPhone, and installed it from iTunes on my iMac.
Upon the deletion of Numbers, my "Other" memory usage went from 6gb down to 2.25 gb, which was reasonable with some large maps and Good Reader docs I have on the phone...
The Numbers app is about 224Mb in size... So, it appears that the iPhone sets aside a very large part of memory for an app as it downloads, and then clears that memory once the app is installed...(though the amount cleared was on the order of 17x the size of the Numbers app...)
I notice a similar usage of Time Machine storage space... Small Time Machine saves require very large amounts of HDD space to be reserved for the backup... Wonder if the same logic is applied to the iPhone... Or perhaps every time WiFi was turned on and Numbers would reattempt to download, the amount of Other memory it required from the iPhone would increase...?
Anyone else noticed this behavior?
Bob

Update...
For "grins" I just un-checked "Sync Music", and synced my iPhone... Other Data went to zero. Re-checked "Sync Music" and synced, and only had 250Mb of Other on the iPhone. After a full sync with 7gb music, the Other memory number is back up to 2.23gb...
Interesting...
Bob

Scoring model error: ...This is often an indication that other memory is corrupt.

Any idea where this error might come from? Thank you,
Error Message:
Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory
is corrupt.
Record Starts at UTC 04/29/2015 15:26:51:
Run the job:"/dll "Microsoft.Analytics.Modules.ScoreGeneric.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ScoreGeneric.Dll.ScoreGenericModule;ScoreGeneric" /Output0 "..\..\Scored dataset\Scored dataset.dataset" /learner "..\..\Trained model\Trained model.ilearner" /testData "..\..\Dataset\Dataset.dataset" "
Starting Process 'C:\Resources\directory\275cc759e61f4dbf889cde5e5cba0835.SingleNodeRuntimeCompute.Packages\AFx\6.3\DllModuleHost.exe' with arguments ' /dll "Microsoft.Analytics.Modules.ScoreGeneric.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ScoreGeneric.Dll.ScoreGenericModule;ScoreGeneric" /Output0 "..\..\Scored dataset\Scored dataset.dataset" /learner "..\..\Trained model\Trained model.ilearner" /testData "..\..\Dataset\Dataset.dataset" '
[ModuleOutput] DllModuleHost Start: 1 : Program::Main
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleDescriptionParser::ParseModuleDescriptionString
[ModuleOutput] DllModuleHost Stop: 1 : DataLabModuleDescriptionParser::ParseModuleDescriptionString. Duration: 00:00:00.0051299
[ModuleOutput] DllModuleHost Start: 1 : DllModuleMethod::DllModuleMethod
[ModuleOutput] DllModuleHost Stop: 1 : DllModuleMethod::DllModuleMethod. Duration: 00:00:00.0000603
[ModuleOutput] DllModuleHost Start: 1 : DllModuleMethod::Execute
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleBinder::BindModuleMethod
[ModuleOutput] DllModuleHost Verbose: 1 : moduleMethodDescription Microsoft.Analytics.Modules.ScoreGeneric.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ScoreGeneric.Dll.ScoreGenericModule;ScoreGeneric
[ModuleOutput] DllModuleHost Verbose: 1 : assemblyFullName Microsoft.Analytics.Modules.ScoreGeneric.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleBinder::LoadModuleAssembly
[ModuleOutput] DllModuleHost Verbose: 1 : Trying to resolve assembly : Microsoft.Analytics.Modules.ScoreGeneric.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost Verbose: 1 : Loaded moduleAssembly Microsoft.Analytics.Modules.ScoreGeneric.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost Stop: 1 : DataLabModuleBinder::LoadModuleAssembly. Duration: 00:00:00.0085356
[ModuleOutput] DllModuleHost Verbose: 1 : moduleTypeName Microsoft.Analytics.Modules.ScoreGeneric.Dll.ScoreGenericModule
[ModuleOutput] DllModuleHost Verbose: 1 : moduleMethodName ScoreGeneric
[ModuleOutput] DllModuleHost Information: 1 : Module FriendlyName : Score Model
[ModuleOutput] DllModuleHost Information: 1 : Module Release Status : Release
[ModuleOutput] DllModuleHost Stop: 1 : DataLabModuleBinder::BindModuleMethod. Duration: 00:00:00.0124750
[ModuleOutput] DllModuleHost Start: 1 : ParameterArgumentBinder::InitializeParameterValues
[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos count = 2
[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos[0] name = learner , type = Microsoft.Analytics.MachineLearning.ILearner
[ModuleOutput] DllModuleHost Start: 1 : DotNetSerializationHandler::HandleArgumentString
[ModuleOutput] DllModuleHost Stop: 1 : DotNetSerializationHandler::HandleArgumentString. Duration: 00:00:01.2145753
[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos[1] name = testData , type = Microsoft.Numerics.Data.Local.DataTable
[ModuleOutput] DllModuleHost Start: 1 : DataTableDatasetHandler::HandleArgumentString
[ModuleOutput] DllModuleHost Stop: 1 : DataTableDatasetHandler::HandleArgumentString. Duration: 00:00:00.3674436
[ModuleOutput] DllModuleHost Stop: 1 : ParameterArgumentBinder::InitializeParameterValues. Duration: 00:00:01.5928818
[ModuleOutput] DllModuleHost Verbose: 1 : Begin invoking method ScoreGeneric ...
[ModuleOutput] LearnerDetails
[ModuleOutput]
[ModuleOutput] {
[ModuleOutput] "InputName":Trained model
[ModuleOutput] "LearnerKind":Microsoft.Analytics.Modules.Gemini.Dll.MulticlassGeminiDecisionJungleClassifier
[ModuleOutput] }
[ModuleOutput] InputDataStructure
[ModuleOutput]
[ModuleOutput] {
[ModuleOutput] "InputName":Dataset
[ModuleOutput] "Rows":1578
[ModuleOutput] "Cols":217
[ModuleOutput] "ColumnTypes":System.Double,193,System.Nullable`1[System.Double],23,System.Int32,1
[ModuleOutput] }
Module finished after a runtime of 00:00:13.5754381 with exit code 255
Record Ends at UTC 04/29/2015 15:27:05.
URL:
https://studio.azureml.net/Home/ViewWorkspace/ffac4490b5e448fa8778ceadc74a0b97?#Workspaces/Experiments/Experiment/ffac4490b5e448fa8778ceadc74a0b97.f-id.976a41a0051c4cda8ad21b0005a64599/ViewExperiment

Dear Sudarshan:
(1) I am already getting rid of missing values
(2) Currently using Jungles model. I just tried with random forests and got the same result though with a different error message (see below). However with Neural and Logistic regression (multiclass) it works.
Also please note that I reduced the number of features from 250 to just 5 and still getting this issue.
The error message is now different:
Process is terminated due to StackOverflowException.
Record Starts at UTC 04/29/2015 18:12:43:
Run the job:"/dll "Microsoft.Analytics.Modules.ScoreGeneric.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ScoreGeneric.Dll.ScoreGenericModule;ScoreGeneric" /Output0 "..\..\Scored dataset\Scored dataset.dataset" /learner "..\..\Trained model\Trained model.ilearner" /testData "..\..\Dataset\Dataset.dataset" "
Starting Process 'C:\Resources\directory\870595a63cd0452da2f3767b831099d7.SingleNodeRuntimeCompute.Packages\AFx\6.3\DllModuleHost.exe' with arguments ' /dll "Microsoft.Analytics.Modules.ScoreGeneric.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ScoreGeneric.Dll.ScoreGenericModule;ScoreGeneric" /Output0 "..\..\Scored dataset\Scored dataset.dataset" /learner "..\..\Trained model\Trained model.ilearner" /testData "..\..\Dataset\Dataset.dataset" '
[ModuleOutput] DllModuleHost Start: 1 : Program::Main
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleDescriptionParser::ParseModuleDescriptionString
[ModuleOutput] DllModuleHost Stop: 1 : DataLabModuleDescriptionParser::ParseModuleDescriptionString. Duration: 00:00:00.0051111
[ModuleOutput] DllModuleHost Start: 1 : DllModuleMethod::DllModuleMethod
[ModuleOutput] DllModuleHost Stop: 1 : DllModuleMethod::DllModuleMethod. Duration: 00:00:00.0000621
[ModuleOutput] DllModuleHost Start: 1 : DllModuleMethod::Execute
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleBinder::BindModuleMethod
[ModuleOutput] DllModuleHost Verbose: 1 : moduleMethodDescription Microsoft.Analytics.Modules.ScoreGeneric.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca;Microsoft.Analytics.Modules.ScoreGeneric.Dll.ScoreGenericModule;ScoreGeneric
[ModuleOutput] DllModuleHost Verbose: 1 : assemblyFullName Microsoft.Analytics.Modules.ScoreGeneric.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost Start: 1 : DataLabModuleBinder::LoadModuleAssembly
[ModuleOutput] DllModuleHost Verbose: 1 : Trying to resolve assembly : Microsoft.Analytics.Modules.ScoreGeneric.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost Verbose: 1 : Loaded moduleAssembly Microsoft.Analytics.Modules.ScoreGeneric.Dll, Version=6.0.0.0, Culture=neutral, PublicKeyToken=69c3241e6f0468ca
[ModuleOutput] DllModuleHost Stop: 1 : DataLabModuleBinder::LoadModuleAssembly. Duration: 00:00:00.0077555
[ModuleOutput] DllModuleHost Verbose: 1 : moduleTypeName Microsoft.Analytics.Modules.ScoreGeneric.Dll.ScoreGenericModule
[ModuleOutput] DllModuleHost Verbose: 1 : moduleMethodName ScoreGeneric
[ModuleOutput] DllModuleHost Information: 1 : Module FriendlyName : Score Model
[ModuleOutput] DllModuleHost Information: 1 : Module Release Status : Release
[ModuleOutput] DllModuleHost Stop: 1 : DataLabModuleBinder::BindModuleMethod. Duration: 00:00:00.0117509
[ModuleOutput] DllModuleHost Start: 1 : ParameterArgumentBinder::InitializeParameterValues
[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos count = 2
[ModuleOutput] DllModuleHost Verbose: 1 : parameterInfos[0] name = learner , type = Microsoft.Analytics.MachineLearning.ILearner
[ModuleOutput] DllModuleHost Start: 1 : DotNetSerializationHandler::HandleArgumentString
Module finished after a runtime of 00:00:58.7028002 with exit code 255
Record Ends at UTC 04/29/2015 18:13:42.
Thanks

Over 30GB of 'other' memory!!!???

Ok, so I have a 120GB ipod classic. This morning i plugged it into itunes and itunes stated that it cannot read the hardware so it has to be restored. I then restored it (which took AGES) and when it's finished restoring it, it now has 30GB of 'other' memory!???? How did this happen, and does anyone know how to fix this. Any help would be greatly appreciated.

Hi, welcome to Apple Discussions.
"Other" is the measure of used space on the iPod not taken up by Audio, Video & Photos. This includes the iPod's library and artwork plus any files you may have copied to your iPod in disk mode. The overhead for the library & artwork data is typically 1-2% of the size of the media, e.g. for 100Gb of Audio & Video expect to have around 1.5Gb of "Other". This information is needed for the iPod's operation and cannot be removed.
If you have significantly larger amounts of "Other", not related to files you've intentionally placed on the iPod, then these are probably disconnected copies of your media files or iPod libraries left over from failed sync operations. The only way to recover the space is to do a full restore.
If restore isn't reclaiming all the space then it may pay to use Windows to format the iPod's drive first.
The following may also help when it comes to putting data back onto the device.
*Break up large transfers*
In iTunes select the menu item *File... New Smart Playlist*. Change the first drop-down box to Playlist, the next to is and the next to Music or whatever playlist holds the bulk of the content you want on your device. Tick against *Limit to*, type in say 10, then change the drop-down to GB, and set the last drop-down to artist. When you click OK you can enter a name for the playlist, e.g. Transfer. Now sync this playlist to your iPod rather than your entire library. When the sync is complete modify the rule ( *File... Edit playlist* ) to increase the size by your chosen amount, then sync and repeat. You can experiment with different size increments, if it doesn't work just choose something a bit smaller until it works each time. Before long you should have all your music on your iPod. Once that's done you can move on to other media such as podcasts, videos, photos, playlists etc.
tt2

"other" memory has 7GB worth in it

Similar Messages

Maybe you are looking for