Other Objects( Workflow Objects) in SPAU

Dear All
We are going for Upgrade from 4.7 to ECC 6.0 . In that under Without Modification Assistant Node , there are OTHER OBJECTS Category. In that , all are in red traffic light and those are Workflow Objects like following.
PDTS 00007842
PDTS 01200231
PDTS 01200246
PDTS 01400009
PDTS 12300096
PDTS 12300110
PDTS 12500044
PDTS 20000085
PDTS 20000159
PDTS 20000193
PDTS 20000460
PDTS 20000889
PDTS 20000906
PDWS 00400012
PDWS 01200147
How to deal those above Objects???? Gimme a solution please
Kind Regards
Karthikeyan.

Hello Karthikeyan,
is this still a problem?
Other objects are not supported by transaction SPAU, there is no navigation to the maintenance tool specially possible.
There is only a sign: you have changed an object which is not supported by the modification assistant and this object is now
delivered from SAP again.
You should use the maintenance tool for this object and your manual notes, which you make during the change of this object. For example, the workflow objects are the following:
PDWA Workflow Pattern with All Versions
PDWS Workflow templates
SCNT Workflow Container PPF (Definition + Data)
SIFL Workflow Documents: Logical Information Object
SIFP Workflow Documents: Physical Information Object
SWFC Workflow Correlation Definition
SWFT Workflow: process type
SWFX Workflow XML Proxy
They can be processed in SE95_UTIL like Julia informed.
Other examples of OTHER OBJECTS found in SPAU:
SmartForms:  Object SSFO -> Transaction SMARTFORMS.
Queries:        Object AQQU -> Transaction SQ01
In SPAU you can double click at the traffic light and on the next popup you can choose 'Adjust' or 'Reset'.
I hope this helps in some way
Best regards,
Tomas Black

Similar Messages

  • HR Objects in SPAU during upgrade from 4.6C to ECC 6.0

    Hello,
    We are in the process of upgrading and have come to the point in SAPup where we need to address all customizations in SPAU.  There were several HR objects displayed (both logical and physical info objects), and from what I have been reading, there should be no HR objects listed.  I followed the instructions in OSS note 519678 to remove unnecessary HR objects from table SMODILOG using program H99PDSY_REPAIR_SMODILOG.  This did remove quite a few, but I am still left with some.
    Can anyone provide information on what I should do to resolve this issue.  I thought that maybe, the information that HR objects should not be in SPAU could be wrong, so I attempted to reset one object to original.  When I did this, it prompted me to create a new "customizing" transport request, when all of the other objects related to SPAU were put into a "workbench" transport.  I also understand that there should only be one transport for all SPAU adjustments, so this further makes me believe these objects should not be showing up.
    Thank you,
    Leeanna

    Hello Leeanna,
    Apply this note. and execute the mentioned report, this deletes all the HR objects
    Note 634146 - SPAU: Objects from the customer namespace in SPAU

  • How to get list of modified repository objects in SPAU

    Hi,
    While applying Support pack for HR (SAP ERP 6.0) I get SPAU prompt with message:
    "The system detected that 10 of the repository objects in the Support Packages have been modified in
    your system . Check whether you want to retain or restore these changes you have made. Fore more
    info about performing modification adjustment see modification adjustment help..."
    Now as I call SPAU i get the screen with following options:
    Correction in SAP Note
    With modification Assistant
    Without  modification Assistant
    etc..
    Can someone guide me How to get list of modified repository objects in SPAU.
    Thanks & Regards
    Vishal

    Hi,
    In SPAU you will get with modification assistence. just expand the subtree, and follw standard process .
    This is to retain the enhancement. If there are any data dictionary related correction go to SPDD.
    Regards
    Rahul

  • How do you search through configured Alternate Extensions to correct error message : The phone number or extension has already been assigned to some other object.

    When configuring a new Unity Voicemail Account I receive this message : The phone number or extension has already been assigned to some other object. I understand that this means that the 10 digit number I am trying to configure as the alternate extension for this user is already configured for another object with Unity.
    I need to search by the 10 digit number and determine where it is configured so I can change it and map to the correct end user.
    I have attempted to to search Users via DTMF Access ID using the 10 digit number with nothing being returned via that search.
    How do I Search all of the copnfigured Alternate Extensions within our Unity Server?

    A subscriber info dump is likely the fastest way.  If you're curious regarding other methods, you can also use the Data Link Explorer (CUDLE) tool which is in the Cisco Unity Tools Depot.  All extensions for all objects are referenced in the "DTMFAccessId" table.  The View menu has a Query Builder which you can use to compile a SQL query that searches for a digit string.  It's best to search for both the 10 digit string as well as an abbreviated string as Unity sees them essentially the same and they are usually should be associated with a single subscriber.  Once you find a match, you can use the "ParentObjectId" value associated with the DTMF access ID to look for a matching owner in the "GlobalSubscriber" table.  The ParentObjectId should match the SubscriberObjectId for a subscriber (assuming the DTMF access ID is assigned to a subscriber).  This is the same thing as looking at SQL; however, you are not directly accessing the DB so this is generally considered the safest way to browse and get a feel for where things are.
    Hailey

  • How to Track the table using Trigger or any other Object

    Hi Folks
    I need to audit Inserts, deletions, updates  to inserted into other tracking table. I was planning on using a trigger to do this,
    Can you please help me how can I wright code for trigger for this. or else using any other object we can do this operation.
    can you please help me thanks in advance.
    Thank in advance.

    Also you can use an OUTPUT clause ( need to modify your DML operations)
    create table itest ( i int identity not null primary key, j int not null unique )
    create table #new ( i int not null, j int not null)
    insert into itest (j)
    output inserted.i, inserted.j into #new
    select o.object_id from sys.objects as o
    select * from #new
    drop table #new, itest;
    go
    The example below shows code that uses OUTPUT clause in UPDATE and DELETE statements to insert rows into an audit table.
    create table t ( i int not null );
    create table t_audit ( old_i int not null, new_i int null );
    insert into t (i) values( 1 );
    insert into t (i) values( 2 );
    update t
       set i  = i + 1
    output deleted.i, inserted.i into t_audit
     where i = 1;
    delete from t
    output deleted.i, NULL into t_audit
     where i = 2;
    select * from t;
    select * from t_audit;
    drop table t, t_audit;
    go
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • IDCS3 Mac Applying effects changes colour of images and other objects

    Something strange happening in InDesign CS3. Hope someone can help me.
    When I apply an effect such as drop shadow to an object the colours of all the other objects on the page change. When I say change I mean almost like converting profiles (e.g. rgb to cmyk). The colours change on all the objects of the page but does not affect objects on other pages of the same document. Does applying an effect such as drop shadow or gradient alter the colour profiles of other objects?
    Very puzzling. Is it a bug or am I doing something wrong?
    I am on a Powermac G5 running Tiger. My colour settings are (throught Bridge) ProPhoto RGB and Coated Fogra 39 for CMYK.
    Profile mismatches are set to preserve embedded profiles for both RGB and CMYK.
    Regards
    Jach

    Thanks Peter for your quick response.
    Your answer was spot on. Changing the transparency blend space to Document RGB has put it right.
    Regards
    Jach

  • How to organize Data Objects and other Objects in SWCV

    Hi,
    I am looking for Best Practices on how to organize data objects in SWCV as well as other objects such as a Distribution Rules.
    We are planning to develop three occasionally connected applications with NW Mobile 7.1 this year and maybe additional one the following year. We will create multiple Standard Data Objects (e.g. Plant, Company Code, Reservations, ...) which are shared in the first set of transactions and in the future transactions.
    I have heard before to separate out Standard Data Objects from Distribution Models and have two different SWCV.
    Should I have a) one SWCV for all current and future Standard Data Objects and one for the distribution rtules or b) should I separate out common data objects into one SWCV, and all transaction-specific data object each into separate SWCV?
    Just wondering if there are any best practices available for this so that I won't run into problems in the future when we want to add more transactions/data objects?
    Any advise is appreciated.
    Thanks,
    W. Berger

    Hi Siva,
    Thanks for quick reply!!
    I have created say SWCV1 for Dataobjects.
    Now i want to create seperate SWCV2 for defining distribution model.
    How i should proceed..I cannot see the uses option while creating new SWCV2  ( Only option i see is  'backward compatibility checkbox : uses NW04/NW04s MI Application')
    where to check the following which you have mentioned?
    SWCV2 was created and inherited SWCV1 in uses tab of SWCV2.
    Thanks in advance!!
    Regards
    Devendra

  • How to refer to other objects?

    Greetings,
    I'm not sure how objects should refer to other objects.
    Example:
    Class Automobile needs to refer to objects from other classes, namely to tires, color, motor and company.
    So, the way I would do this in C++ or VB is to store all tire, color, motor and company objects into arrays and then store Integer ids in class automobile refering to the index. Like
    tiresId
    colorId
    motorId
    companyId
    So if I would like to know the name of the company of this automobile, I would have to do the following:
    company(automobile.getCompanyId).name
    I'm not sure however if this is the right OOP-Way of doing it. Should I rather put object references into class automobile instead so that I would only have to
    automobile.getCompany ?
    The problem I have with this solution is that I have to read and store the automobile data into files and while it's pretty easy to store an integer-id I'm not sure on how to store object references. They are a little "obscure" to me on this point.
    Thanks in advance for any advice.

    if you just want to save the type of company, color and so on for every automobile, i think integer ID is a good way,
    similar to the existing Color-class with constants:
    Color.BLACK, Color.RED, ..
    the way with references would also work, then all referenced objects will be saved too,

  • Text square with other objects in a layer

    Using Motion 4. I have a 3d scene with various layers. Each layer contains objects that are oriented differently. I'm trying to add text to one of those layers. But the text is oriented square to the screen instead of being oriented square with the other objects in that layer. How can I orient the text square to the other object. I could try to do it manually but I'm sure there is a way to do this automatically.
    Thanks

    I did find a way to do this, although I'm sure there is an easier technique I don't know about. I used the camera framing behavior to bring the layer square with the camera. Then I added the text to the layer. Finally, I removed the Camera Framing behavior to go back to the original view. No so simple but it works.

  • How to recover a state of  one objects threads by other object

    hi everyone
    how to recover a state of one object's threads by other object..
    i am creating a object in that i have 10 thread..... i have started it then i have closed that object ...then i am creating a new object for the same class ...i need to stop those thread which i have started earlier

    saiyath_babuhussain wrote:
    hi everyone
    how to recover a state of one object's threads by other object..Objects don't own threads so that's hard to understand
    >
    i am creating a object in that i have 10 thread..... i have started it then i have closed that object ...then i am creating a new object for the same class ...i need to stop those thread which i have started earlierWe don't so much stop threads as inform them politely that their services are no longer required. When you have a long running thread it's almost always a loop, often with a wait or sleep which causes it to wait until it's activitty is needed.
    So if you want to be able to wind up a thread from another thread then you put a boolean flag in which can break the loop. The other thread then changes that flag and calls interupt() on the thread it's trying to stop. Interupt will kick the thread out of wait or sleep if that's where it is, causing an InterruptedException. On discovering that the flag indicates it should stop, or on catching an InterruptedException the thread should then clean up and finish.
    The master thread can call join on the thread it's stopping if it needs to wait for it to terminate.

  • "Create Simple document" from other objects

    Scenario: Creating a document using option "Create Simple document" from other objects
    I have created a document type and defined the object link for Functional Location with option "create simple document"
    When clicking on create icon on the additional data tab on IL02 screen, The system asks for the document type and then the file to be uploaded.
    The document type that i have defined has the Description filed as mandatory field and hence i am not able to create the document.
    However, for the Document type when i set the description field as not mandatory the system creates DIR. But this DIR has no description.
    Please let me know if there is a BADI, using which i could set the Functional location name as the description OR if there is some enhancement by which the user is asked to enter the description when creating the document.
    Warm Regards,
    Vivek Mohankumar

    Hi Vivek,
    After my tests I would like to inform you that this is                  
    the standard system behavior as the document description field is       
    maintained as mandatory in transaction DC10. Please note that for the   
    simple creation of documents this should not be set as a mandatory      
    field.                                                                               
    The creation mode can be defined in transaction DC10 for each object    
    under 'Define object links'.                                                                               
    Please note that the value "1" for the creation of documents is used    
    to enable a user to simple attache a word file to an object             
    without going to the transaction CV01n. Therefore the system behaviour  
    is different then creating a document by CV01n and attaching a          
    file to it. With simple creation mode there should not be any           
    mandatory fields as the user cannot enter anything during the creation  
    process.                                                                               
    However, you can change the behaviour how the document is created by    
    MM02 transaction if you change the customizing in transaction DC10      
    like this:                                                                               
    If you maintain the value "2" for creation of documents, the user is    
    put to transaction CV01n and then the description can be entered. So    
    maybe this would solve the issue.  
    Regarding a useful BADI I can only recommned you to test BADI DOCUMENT_OBJ1,
    DOCUMENT_OBJ2 or DOCUMENT_MAIN01 for fill the description field.
    I hope this information could be useful for you and help to avoid the   
    mentioned error message.                                                                               
    Best regards,
    Christoph

  • As3 get position from object in other object

    please i need help, i have a object inside this object i have other objects, (MC.Part1,MC.Part2,MC.Part3...etc), the MC rotate in the escene, that with interpolation, with the tools of flash,that is ok, the object parent rotate and the childs with he, but i want obtain the coordenate from the childs (MC1.Part1.x, MC1.Part1.y,MC1.Part1.z, etc), i try with trace(MC1.Part1.x), and always give me the same coordenate, i think is the coordenate in the parent, but i want the coordinate of the child when the parend is rotating.
    Please help me

    The coordinates of the child objects do not change relative to the parent that holds them if the parent is being moved, so they will report the same values all of the time.  If you want to know the location relative to the main stage, then you need to make use of the localToGlobal() method.  Try searching Google using terms like "AS3 localToGlobal tutorial" to get an explanation of how to use it.

  • When creating a remote address in a pot or other objects you cannot use a / for a address??? my ladders addresses contain such ////// symbols for some addresses?​??

    when creating a remote address in a pot or other objects you cannot use a  /  for a address??? my ladders addresses contain such ////// symbols for some addresses???

    On the AB object, "f" is a float and cannot address individual bits.
    Otherwise, you would replace the "/" with an "_".
    Forshock - Consult.Develop.Solve.

  • Pojo used by many other objects

    Hello all,
    In my application I have got a complex entity containing lists and maps filled with data by the persistence tier and that entity is to be used by many other objects in my application, including many controllers. I am trying to find a way to access that pojo in the most practical way. For that I could use a kind of factory such as:
    public final class MyPojoFactory
        private static MyPojo instance;
        public static MyPojo getInstance(){
        if(instance == null){
           instance = new MyPojo();
           return instance;
    }and then access my pojo using the MyPojoSingleton.getInstance() method throughout the client part of my application. However, I am bit concerned about the thread safety of this implementation since instance is a static variable and that its state could be altered indeterministically.
    What I've thought of is having a parent abstract class extended by all the classes that would need this pojo. But sometimes these classes hierarchy gets really deep and I end up with things like myClass.getParentClass().getParentClass().getMyPojo() if you see what I mean, which I would like to avoid.
    Any solution or design pattern or simpler implementation I should have a look into?
    Thanks a bunch,
    Jimmy

    Well thanks for this tip! But I've got another similar case where the service needs an id as parameter as such:
    public final class MyPojoFactory
        private static MyPojo instance;
        public static MyPojo getInstance(long primaryKey){
        if(instance == null){
           instance = service.getData(primaryKey);
           return instance;
    }In that case I don't think I could use my PojoFactory because the instance object has a global scope, doesn't it? How could I handle such a case?
    Thanks again,
    Jimmy

  • Tentative bug report: property node (and other objects) resizes structure in which they are dropped even when this is not needed

    This one has bugged me for a while, so, since I am in a mood to report annoying features, here it is:
    On the diagram, when you drop an object that could have its size increased by user action (for instance a property node in which you chose "Value", which is a short property, but you could later change this to a "longer" one, which admittedly might require more space on the diagram), a case structure in which you drop it, will automatically increase its size.
    Let me illustrate this with ONE example (can be reproduced with other objects such as enums, clusters, etc...).
    Here is a simple diagram:
    Note that I am going to create a property node from the front panel. This, for a reason that makes the beauty of this "feature", is very important. Apparently, if you create the property node from the diagram, nothing weird happens. The exact location where I will drop the node is not very important but needs to be close enough from the border.
    Here is the result (LV 2011 but as I said, this has bugged me for a few versions already):
    Basically, the case structure (and the whole diagram as a matter of fact) has expanded.
    This is particularly annoying, say, when you are creating a diagram with 10 cases in a case structure and you start dropping things such as property nodes in each case: the structure keeps growing, and growing, and growing...
    That also works with Event structure, and I am ready to bet, with other as well.
    As I said, it is also not limited to Property nodes. I have noticed that this happens if you drop a cluster constant that contains an enum (presumably because some of the enumerated strings are longer than others).
    I could speculate why this is the case, but that is not my job.

    Actually, this might not be true. I found a variant of this behavior. With "Place Structure with Auto Grow enabled" unchecked, here is what I observed while dropping a property node on my diagram:
    Before:
    After:
    This is the expected behavior. The Property Node is partly hidden inside the Case Structure I dropped it in. Now that's not what I wanted to do. I wanted to drop it in in the innermost Case Structure:
    The problem is that now this Structure has grown (as has the whole diagram) to leave space for the whole Property Node:
    It is a subtle bug in the sense that I tried to reproduce it on a new VI with a series of nested Case Structures, but it did not result in this behavior.
    Anybody caring to comment?

Maybe you are looking for