Other question: There is a way to apply different video channels to different program monitors?

I'm editing a marriage ceremony. There is two cameras on the couple in different angles, and there is a camera roaming the church for detais on the audience. I synch them in the a sequence, cut off the shaky parts on the roaming camera and I alternate between the two cameras. I can't see what is behind the layer hierarchy, so I turn its visualization off to se what's happening on the other cameras, and this is quite unpratical.
So, how to do it? To make different preview outputs for different video channels on the same sequence?

There is no special trick to qualifying answers. There are just different opinions as to what the proper answer should be. Very seldom will anyone here steer you wrong. You just might have better results from one type of answer than another.
I just happen to be of the opinion that the Creative Cow provides the best bang for the buck. Lynda.com is not free, but has the advantage of taking you through a real project to come up with a solid result.
To Google it yourself, as you have seen, is a perilous journey through heavily accented and sometimes poorly put together tutorials. Once you find Andrew's tutorials, you are in good hands. There are other good ones, and Occasionally I will put something together myself. But for a start, use Andrew's tutorials to get you most of the way there.

Similar Messages

Mark Clip - X shortcut doesn't work for some reason. Is there an easy way to mark a clip without going into Source Monitor?

Hi guys,
I'm using Premiere Pro CC on Windows 8.1 Pro. The Mark Clip function - X shortcut key by default doesn't seem to work.
I know that if I go into Source Monitor I can mark the clip in there but WHY ? In the old day of CS5.5 I can mark a clip (not timeline) as quick indicator for frame / sound issue of a particular clip. One key press and I'm done.
So, is there an easy way to mark a clip in Premiere Pro CC without going into Source Monitor?
Cheers!

Hi Mark and everyone looking to find the answer,
After experimenting, I figured out the answer. This applies for the latest version of Adobe Premiere Pro CC (as of 01-Sep-2014) ver 8.0.1 (build 21)
Context: You want to add a marker to a specific clip instead of a sequence but you can't seem to do it.
Why?
    - X key (or Mark Clip as Premiere Pro CC calls it) doesn't add a Marker to a clip. What it does is using the clip you are selecting as reference for Mark In / Out of your current sequence.
    - M key (or Add Marker as Premiere Pro CC calls it) will add a marker to your clip.
   HOWEVER:
    If you are not expanding your clip to see the wave form or clip thumbnail, the marker on the clip will not show up. It used to show up in CS5.5!!!!!! Why not in CC!!!?!
    It will only add the marker to the clip you are selecting. Track targeting does not matter.
    If you don't select any clip, it will add a marker to your sequence.
Example: (This is the same clip and sequence)
How it looks with marker added.
Track targeting does not matter - reference number 1
Current selected clip is is the key - reference number 2
    2. How it looks with marker added but you can't see
    3. How it looks if you don't select the clip and hit M
Hope this help!
Cheers!

Is there an easier way to strip the video to leave just the audio in a clip?

A friend asked me how to remove the video so as just to leave the audio in a clip.
She said she had tried detaching and expanding the video, but even though she selected just the video, whenever she hit the delete/backspace key everything disappeared.
I couldn't find a way of doing it but suggested the old trick of simply exporting the clip as audio only.
It seems a bit convoluted so is there a quicker way?

I have just realised that this is not quite the solution I thought it was.
The gap is almost like an invisible clip which prevents anything being added to the timeline above the audio.
Yes, you can attach another clip above the timeline but it's not exactly elegant.
It appears that the only way to get rid of the video to leave an uncompromised audio clip is to Share>Audio Only and re-import.

Is there any possible way to recover photos/videos on an iPad even if it wasn't backed up?

I recorded a video on my iPad Air and then my cousin deleted it like 5 minutes later, it wasn't backed up or anything but is there any possible way to recover it or no?

Sorry, no.

Is there a way to apply different dimension filters to two measures

Dear all,
Let's say I have a report that goes something like below:
TIME DOLLARS FORECAST DOLLARS
JAN 99999 99999
FEB 99999 99999
MAR 99999 99999
APR 99999 99999
MAY 99999 99999
DEC 99999 99999
What I would like to achieve is this:
TIME DOLLARS FORECAST DOLLARS
JAN 99999
FEB 99999
MAR 99999
APR 99999
MAY 99999
DEC 99999
i.e. DOLLARS displayed only for first two months (or whatever. May be because the report is being run in March). And for rest of the year I display forecast.
Please note that I do not want to achieve the above with the help of "formatting".
What I am looking for is "an ability to apply two separate filters (for the same dimension) on two different measures in the report". i.e. in the above case DOLLARS has a filter of JAN to FEB; and FORECAST has a filter of MAR to DEC.
How can I do this in Discoverer? Any hint/ pointers are greatly appreciated.
Cheers.
pxsheth.

Hey there.
I'm not sure exactly what you mean when you say you don't want to achieve with help of formatting.
See if this suggestion makes sense - and doesn't fall into that formatting camp.
The only way to add a column in Discoverer is via calculations.
So if you have a column called dollars and one called forecast_dollars then I would think you'd want to determine the month of the run date - or ask user what month they want to run it for.
You don't say how you determine forecast_dollars but let's just say all the columns come from data.
So could you not have a condition that brings back the data for a date range (ie: current year or ask user for from / to dates). Then:
calc_dollars calculation: equals the dollar amount brought back from the query if record month <= current month else 0.
calc_forecast_dollars calculation: equals the dollar amount brought back from the query if record month > current month else 0.
So in practice:
table A has 3 columns: time, dollars, forecast_dollars
condition: where time between from_date_parameter and to_date_parameter
calc_dollars: SUM(case when time <= SYSDATE then dollars else 0 end)
calc_forecast_dollars: SUM(case when time > SYSDATE then forecast_dollars else 0 end)
That gets you a time column, a dollars columns and a forecast_dollars column.
In your example, it appears you want forecast_dollars in the same column. I'm assuming this is incorrect but if you wanted it, you'd just have one calculation such as:
calc_bucks: (case when time <= SYSDATE then dollars else forecast_dollars end)
So, is this the kind of thing you want or would this be more formatting?
Russ

PLEASE tell me there is a way to apply automatic strokes using the Pen Tool.

To apply pencil and brush strokes using the Pen Tool (in Photoshop CC - the version I'm using), I would constantly have to right-click on my path, and on the dialog menu that pops up, select "Stroke Path...," then select which "Tool" (I namely use the Pencil and Brush tools), then hit "OK." And that gets ANNOYING. This is Photoshop CC - which means there should be a way for the Pen Tool to automatically apply the (Pencil/Brush) strokes while I'm creating paths. Illustrator does that - so there should be a way for Photoshop to do that as well. It's a software a majority of artists use; there SHOULD be a way to automatically apply pen strokes. PLEASE tell me there is.

You can do a shape rather than a plain path, and apply a stroke there. But, just plain vanilla; no fancy brush tips or scatter or anything like that.

Is there a best way to apply for BoA's CLI

Just with the online button, or should I call? I've been at a $1,000 with them now for several years. Currently just waiting on 2 Chase cards with $12,000 CL a piece to report. I'm also a Platinum Preferred member with BoA, not sure if that will help or not.

ojefferyo wrote:
shnsajax wrote:
Just with the online button, or should I call? I've been at a $1,000 with them now for several years. Currently just waiting on 2 Chase cards with $12,000 CL a piece to report. I'm also a Platinum Preferred member with BoA, not sure if that will help or not.How long have you had the card? A credit analyst told me for best results 6 months timeframe is where you want to be at. Also I would wait for those cards to report since BofA likes to match or go above your highest limit (as long as your profile supports it). You could do it online or call in. They will pull TU for a CLI.This. Call-in and request a CLI. Shoot for the moon, they'll counter if it's too high. BOA gave me my higest CL last year a few weeks after I opened the card. Good luck!

TS4006 i was about to have my iphone activated and got lost. i have app "find my iphone turned on so far it says offline message and its been a week past. I was wondering if there is a way apple could detect it on some special program...

last week i went to thte bank and made a withdrawl for having my iphone activated back only to have found out later that she's no where to find. I hen proceed to check on her on my appfs find my iphone but to no avail for it was noted to have "offline". my closest guess would be on the bank's camera but the people whom i speak with has a lack of initiative to help me out and end up to get involve but a limited and not sufficient enough to satisfy me since i only see me and the tellers pose and i specifically stated to them while i was on line waiting coz i end up making hide and seek to a toddler of one and a half years and boy everytime i shows up my surprise me on a pamplet maybe my only clue to have ended dropping my phone in replave of the pamplet randomly left by one of the customer, she would simply roll her eyes and face on a different direction, we where even like a quick show for everyone who where there waiting as well.
my question is since everytime i checked it always on the offline mode, is there anyway possible to still locate it through her serial/IMEI number or like a special program to detect it. Do i still have a chance to recover after a one week missed siri ? pls. enlighten me for she was my best buddy. thanks

There's no other way to track it other than Find My iPhone. All you can do is wait to see if it ever goes back online. The serial number will only help to identify it as yours if it is ever found, and the IMEI number would only allow your carrier to blacklist the phone so it couldn't be reactivated on their network, if the carrier offers this service.

Is there any easier way to multiclip different aspect ratios without exporting footage?

I am using FCP Studio 3 and I have a 3 cam shoot with 3 different HD aspects - 1920x1080, 1440x1080 and 1280x1080 - is there a way to multiclip them without exporting and creating new clips?

No. You cannot make them into a multiclip if the files all have different frame sizes. For Multiclip to work, the files need to match in every way possible...frame size, rate, codec.
But you can see what PluralEyes can do for you. It will stack the video in layers, and match up the audio for you.

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
Is there any way to get more VRAM to play games on steam?
I've learned by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
So the two questions are...
Is there any way to upgrade my VRAM, so that I can play games on steam?
Why do I only have 256MB VRAM when I have 8GB total RAM?
Other Info:
I have a quad core i7 Processor.
My graphcics card is the AMD Radeon HD 6490M.
I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
THANK YOU SO MUCH IF YOU CAN REPLY,
Dylan

The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included). You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
If you are very much into gaming, the I suggest A PC. They are far superior for that type of application to a MBP.
Ciao.

Is there a way to apply sound effect to each application?

Hello, I use x-fi surround 5.1 usb and windows 7-64bit.
I like to play Elder Scrolls: Skyrim with stone hall EAX effect and winamp playing other mp3s.
Is there a possible way to apply EAX only to Skyrim game and not winamp?
It seems that no thread is talking about this issue. I really appreciate if someone gives me directions or hints.

Hi,
Sorry I don't think that is possible. EAX effects applies to all sounds when it is enabled.

What is the best way to apply a template to the rebranded partner site?

My partner site got severely jacked up when I was brand new to BC.
Since then I've overwritten it in Muse while attempting to "try' it as well.
Apparently does some "cleaning" meaning the template files I once had access to in the templates folder got deleted. bleh.
Is there a quick way to apply another template I own to that site such as publishing a trial site and re-pointing dns or anything that direct and smart; or is the only way to do it a manual, one by one by one of files, modules, content holders and so on?

Hey there,
If you want to access those partner site templates, layouts and everything else, here are some FTP details you can use:
host: maxdesigncompany.businesscatalyst.com
username: maxdesigncompany.businesscatalyst.com/[email protected]
password: password
Feel free to log in through FTP and download the whole site. All the modules should work since the module IDs on your site will match those on this site.
Cheers,
-mario

Best way to apply mono effect to stereo track?

I have a bit of guitar gear that generates a stereo signal that I want to use. I can record it into a stereo track no problem. But I would also like to use effects like Channel EQ on it.
Is there any straightforward way to apply a Channel EQ or other mono effect to both sides of the one stereo track? I seems like that would be a common enough thing to do for Logic to have a mechanism for it...
I know that I could just record the stereo signal onto two mono channels, but then that becomes a hassle grouping them and keeping other settings synchronized, etc.

Never mind. I just figured out that since I had selected one of the built-in electric guitar channel strips (as a starting point) that the effects in the menu were all mono. I reset the channel strip settings and then Channel EQ (and others) are now showing as stereo in the menu. Great!

"Automation" is too manual - is there a better way?

I'm using automation to apply different effects (echo, reverb, etc) at various points in my track - but I can't believe I have to keep doing the same thing manually every time I want to change effects at each point. Is there a better way to apply the same automation of effects to various points (or regions) in the track?
Thanks in advance!

OMG...HangTime - you saved me a TON of work...THANKS!!!
Nice site btw, well done
J.

Is there a way to make the video I have added to my TOC larger?

I have added a video to my TOC in Captivate and would like to know if there is a way to make it larger? My goal is to have a talking head video play next to and sync with a powerpoint deck. I am able to get the layout how I want it, however, my video (originally 640x480) is showing up very small. I would like to know if there is a way to make the video appear larger.

Afraid not. The TOC video is very limited in size.

Other question: There is a way to apply different video channels to different program monitors?

Similar Messages

Maybe you are looking for