Other servers

Hello!
One question: if I import a site (that I've in diffferent server from .Mac) in iWeb, I modify it, than can I publish it on that server (always different from .Mac) or can I publish only in .Mac?
Thanks!
Emiliano

First off.... there is no way to IMPORT an already published webpage INTO iWeb for editing. This is IMPOSSIBLE and is not the function of iWeb.
Having said that, to address the rest of your question... Pages/sites made in iWeb can be published directly to .Mac, or they can be published to a local folder which can then by uploaded via FTP to any 3rd party web server of your choice.
Of course, doing so to a non-.mac server, you will miss out on the .Mac specific features like comments, search, enhanced slideshow, counters, passwords, etc...which you may or may not miss.

Similar Messages

  • I can't open my gmail or send gmails on Firefox. I can read and send gmails on other servers. It started when I was using a hotels wireless connection. Firefox said that this was not a secure site and asked if I wanted to overide it. Since then I have

    I cannot open my gmail nor send any gmails on Firefox. My wife also has gmail and she has no problem on firefox opening or sending her gmails. Also, I cannot access my settings. It started when I was at a hotel last Friday using their wireless connection. When I turned firefox on, which automatically goes to gmail, firefox would not open my gmail as it stated that this was not a secure site. I probable did something incorrectly and I got blocked out. All my other bookmarks work fine. I can access my gmail using other servers. Please help. Thank you.
    == This happened ==
    Every time Firefox opened
    == June 11

    how can i open my gmail at mozilla firefox? because i cant open it..

  • I'm using a Mac. After swithcing to ICloud will I be able to use IWeb to upload and publish my sites hosted by other servers like Prohosting ?

    I'm using a Mac. After swithcing to ICloud will I be able to use IWeb to upload and publish my sites hosted by other servers like Prohosting ?

    iWeb has two other ways to publish your site...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html
    ... and the second method allows you a choice of how you upload the files...
    http://www.iwebformusicians.com/iWeb/URLs-Favicons.html
    Here's a publishing workflow checklist...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Website-Publishing-Wo rkflow.html
    The MobileMe only features can be replaced by alternatives...
    http://www.iwebformusicians.com/iWeb/Comments-Password-Protect.html
    If you have folders of assets outside of the main website folder on MobileMe, download them from the Apple server. From the Finder Go menu, follow the path iDisk/My iDisk/ to get there. Your website files are in the Web/Sites folder. Drag any files/folders onto the desktop.
    Use an FTP application to upload these assets to the root folder on your new server...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html
    ...and change the relevant URLs to...
    http://www.domain-name.com/Folder-Name/file-name.file-extension
    There are lots of options for hosting for about half the cost of MobileMe...
    http://www.iwebformusicians.com/iWeb/Website-Hosting.html
    If you have been using a web.me.com domain name, you need to register a new one. Most hosting services give you at least one free and registering with your hosting company will make forwarding and managing it a lot easier.
    Make sure you add the new name to Google and create, upload and enter a new sitemap.xml...
    http://www.iwebformusicians.com/Search-Engine-Optimization/SEO.html
    If you have inbound links on other sites...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Inbound-Link.html
    ... remember to inform the webmasters of you new URL.
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Using iWeb on other servers than dot MAC?

    Can people confirm that one can use iWeb with other servers than Apple's dot Mac site? The fine print says: *iWeb publishing requires Internet and webserver access (.Mac recommended). So from that I guess it is feasible but is it easy to set up?
    Thanks
    Rudy

    After the sales rep at the Apple store confirmed vehemently that I would lose no functionality publishing to my own server, I was disappointed to discover this was not the case.
    I wanted to use my own webserver, since there is a perfectly capable apache server already running on my iMac. I do understand that Apple wants to sell their dotmac product, but they have stranded too many users with their approach on iWeb.
    I upgraded to iLife 06 specifically for iWeb, and I feel cheated by the withdrawal of functionality unless I buy their dotmac product.

  • Other servers vs. .Mac

    Like so many so many others in here I'm in the throes of slow page loading by my friends using PC's (and customers). I'm curious if those of you who have mastered uploading your sites to other servers have faster-loading pages...and is that, perhaps, the reason you insist on using different servers? (URL issues aside)

    hey....
    nice site. I'm such a palm tree lover anyway being from California... I love the slideshow in black with reflections turned on... works great. I just wish that apple had a cross dissolve for the slideshow instead of a straight change. Maybe in the next release.
    Maybe one suggestion... my site also had the white blocks down the left and right. If you like that great, but if you want it to be uniform regardless of how wide they open the page do this.
    Open your site in iWeb, and select the page you want to work on by clicking on it once. Then, go to the view menu and select the inspector. Like Will says... the inspector is your friend! lol.
    In the inspector, select the page menu, then choose a color that closely matches the background of your page. Then, regardless of who opens your site or how wide they open the browser window... all they see is color.

  • Search is working fine on one server but not giving results from other servers. moss 2007?

    hi,
    we have multi server or wfe architecture. configured search service on one server 01, central admin is 02, and query as 03, now crawled content with hostname:port of 01. everything is fine.
    but now when we trying to search results its giving results on server 01 which is index and query role. but didnt return any results in other servers.
    help is really appreciated.
    Thanks,
    SJ

    I thought you are posting question in wrong forum. Please move the question to
    https://social.technet.microsoft.com/Forums/en-US/home?forum=sharepointsearch. There some one will help
    Ravin Singh D

  • Connecting to SAP using JCO: Difference between SAP AS 7.3 & Other Servers

    Hi All,
    I am connecting to SAP system using jar sapjco3. I am able to connect to SAP system successfully. But I observed some difference in connection to SAP system between different servers.
    1. Using TOMCAT  6 and JBOSS 5.1
    While connection, when I call API from my code -
    JCoDestination  dest = JCoDestinationManager.getDestination(ANY_RANDOM_STRING);
    It works successfully and I am able to connect. ANY_RANDOM_STRING is any random RFC destination which is not present in     netweaver administrator -->  Configuration --> Destinations
    2. Using SAP Netweaver AS 7.3
    While connection, when I call API from my code -
    JCoDestination  dest = JCoDestinationManager.getDestination(ANY_RANDOM_STRING);
    It fails giving exception as
    com.sap.conn.jco.JCoException: (106) JCO_ERROR_RESOURCE: Destination SAP_SERVER does not exist.
    But when I replace ANY_RANDOM_STRING with an RFC destination name present  in  netweaver administrator -->  Configuration --> Destinations, it works successfully.
    So, my questions is
    When I give any random string as RFC destination in other servers, it is connecting to SAP and not in SAP AS?
    Is RFC destination always necessary for connection? If it is necessary, then why ANY_RANDOM_STRING  is working in other servers and not in SAP  netweaver AS ?
    Thanks & Regards,
    Anup

    Vivek,
        We have the WebAs 640 Java system running on a AIX server. I placed the following folder under classpath
    /usr/sap/<SAPSID>/JC**/j2ee/cluster/server/bin/ext/com.sap.mw.jco/sapjrfc.jar
    The error thrown is
    JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
    JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [Can't find library sapjcorfc  (libsapjcorfc.a or .so) in sun.boot.library.path or java.library.path
    sun.boot.library.path=/usr/java14_64/jre/bin
    java.library.path=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib:/usr/lib:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/JC15/j2ee/os_libs:/usr/lib:/lib:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib]. java.library.path [/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib:/usr/lib:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/JC15/j2ee/os_libs:/usr/lib:/lib:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib]
    The problem is a search on libsapjcorfc.* only return dll files and no .so or .a files.
    Wondering how ISA loads the native libraries on AIX!
    Thx,
    Bharat.

  • Is the license terms allow you to generate pages using Wizzard Business Catalyst and publish them on other servers. As the export side and run?

    Is the license terms allow you to generate pages using Wizzard Business Catalyst and publish them on other servers. As the export side and run?

    Our iPads work just fine behind a firewall and the Lightspeed filtering solution in an education environment.  If your proxy solution cannot be configured to support IOS maybe you should be looking at another vendor.  Products such as 8e6 and Lightspeed can be deployed without the use of a traditional proxy set up.
    http://www.m86security.com/products/web_security/m86-web-filtering-reporting-sui te-deployment.asp
    http://www.lightspeedsystems.com/products/Web-Filter.aspx

  • ASM - How to detect other servers

    I have installed Oracle 10G (10.1.0.3) database and ASM instance on the same server. Now I want to add two different servers to the same disk groups that resides on the server where ASM instance is installed. How we can identify the other serves? What are the components we need to install on the other servers so that it can be added to the same diskgroups?
    Thanks.

    itssumitrai wrote:
    Well... yeah I m making use of jpcap ..
    and yeah just as windows generates a list of computers on a network , I wanna show
    the list of computers along with their Ip addresses reachable vi a network interface ....
    Certainly there would be a way to access that very information using the Windows OS API.
    And plz .. its pretty clear what i want to do .. just help me out instead of finding mistakes in terms ....Help...
    Unless you are the owner of that network then I suggest that you get permission in writing (pen and ink rather than email) before doing whatever it is that you want (unless you use the windows API).
    People have been fired, expelled and had civil/criminal legal proceedings against them for network scanning even when they thought they had permission.

  • Can't create web service for other servers

    I am trying to create EJB web service for JBoss 4.0 but getting error in "build-impl.xml " file on the following line
    "<taskdef name="wscompile" classname="com.sun.xml.rpc.tools.ant.Wscompile">"
    Is there any way to create an web service for another servers.
    OR
    Is there any way to configure "wscompile" tool to generate the web service for other servers
    It would be of greate help if any-body responds
    thanks in advance
    parag

    Hi,
    The following article
    http://developers.sun.com/prodtech/javatools/jsenterprise/reference/docs/jse7/jse7_jboss_plugin.html
    describes how to configure the JSE IDE to develop and deploy a J2EE application on a JBoss Application Server by using the JBoss plug-in.
    Hope this helps.
    Radhika

  • Re:How fetch the other servers data using fm:TH_SERVER_LIST

    Hi,
    using this function module TH_SERVER_LIST i could fetch the data from current server but i'm unable to
    do the same from other servers,so plz tell me how to fetch the data from other servers.
    Regards
    narendar

    This is RFC-enabled FM so you can give RFC destination of other servers.

  • DSWP : activate monitoring for other servers

    We have added some non-SAP servers and applications in our monitoring
    solution.
    When I setup the system monitoring (DSWP Tcode) and I try to add CCMS
    alert for "other servers", these alerts are not display in the
    monitoring. It works well for "other software components", but we need
    to make a distinction between servers.

    before ur system is attached to load balancing, your both physical web servers should have a default peoplesoft login url, see you can access the web servers separately with that urls.
    Thanks

  • How to show 2 lines in report from 2 other servers scom 2012

    hello i want to create 2 report in one report. ex availability report of 2 servers in one chart can i do this or it is impossible?

     
    Hi,
    If you want to combine and customize two reports, you would have to go into Visual studio for instance and create your own report.
    Here is a blog for your reference.
    Custom Report Authoring for Beginners
    http://blogs.technet.com/b/jonathanalmquist/archive/2011/01/03/custom-report-authoring-for-beginners.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Cannot connect to Session broker server, but can to other servers in Cluster

    Hi Everyone,
    Hopefully this is the right place to post. Have searched quite a bit through the forums (not all 19000+ pages though), and can't seem to find a similiar issue.
    I have also searched the internet and tried all solutions others with a similiar problem have.
    This is my problem:
    We have two servers running Server 2008 R2, set up as Remote Desktop Servers in a cluster setup.
    The session broker is located on the second server (This is an active server which has sessions load balanced to it). There is also a DNS round robin setup
    Problem: When sessions are allowed to be load balanced on Server2, then the users cannot connect to the cluster. The round robin seems to still send some sessions to the first server, and these seem to connect fine.
    I suspected the issue was with the WMI Respository, and so started. I found a lot of errors, but have been unable to fix them.
    I downlaoded the WMIDiag from Microsoft, and here is the report:
    48866 15:56:44 (0) ** WMIDiag v2.1 started on 15 April 2015 at 15:48.
    48867 15:56:44 (0) **
    48868 15:56:44 (0) ** Copyright (c) Microsoft Corporation. All rights reserved - July 2007.
    48869 15:56:44 (0) **
    48870 15:56:44 (0) ** This script is not supported under any Microsoft standard support program or service.
    48871 15:56:44 (0) ** The script is provided AS IS without warranty of any kind. Microsoft further disclaims all
    48872 15:56:44 (0) ** implied warranties including, without limitation, any implied warranties of merchantability
    48873 15:56:44 (0) ** or of fitness for a particular purpose. The entire risk arising out of the use or performance
    48874 15:56:44 (0) ** of the scripts and documentation remains with you. In no event shall Microsoft, its authors,
    48875 15:56:44 (0) ** or anyone else involved in the creation, production, or delivery of the script be liable for
    48876 15:56:44 (0) ** any damages whatsoever (including, without limitation, damages for loss of business profits,
    48877 15:56:44 (0) ** business interruption, loss of business information, or other pecuniary loss) arising out of
    48878 15:56:44 (0) ** the use of or inability to use the script or documentation, even if Microsoft has been advised
    48879 15:56:44 (0) ** of the possibility of such damages.
    48880 15:56:44 (0) **
    48881 15:56:44 (0) **
    48882 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    48883 15:56:44 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
    48884 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    48885 15:56:44 (0) **
    48886 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    48887 15:56:44 (0) ** Windows Server 2008 R2 - Service pack 1 - 64-bit (7601) - User 'MIBCO\CONN.LOMBARD' on computer 'SSCRDS02'.
    48888 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    48889 15:56:44 (0) ** INFO: Environment: .................................................................................................. 1 ITEM(S)!
    48890 15:56:44 (0) ** INFO: => 3 possible incorrect shutdown(s) detected on:
    48891 15:56:44 (0) **          - Shutdown on 05 December 2014 22:55:28 (GMT-0).
    48892 15:56:44 (0) **          - Shutdown on 12 December 2014 06:43:00 (GMT-0).
    48893 15:56:44 (0) **          - Shutdown on 27 February 2015 05:19:26 (GMT-0).
    48894 15:56:44 (0) **
    48895 15:56:44 (0) ** System drive: ....................................................................................................... C: (Disk #0 Partition #1).
    48896 15:56:44 (0) ** Drive type: ......................................................................................................... SCSI (DELL PERC H700 SCSI Disk Device).
    48897 15:56:44 (0) ** There are no missing WMI system files: .............................................................................. OK.
    48898 15:56:44 (0) ** There are no missing WMI repository files: .......................................................................... OK.
    48899 15:56:44 (0) ** WMI repository state: ............................................................................................... CONSISTENT.
    48900 15:56:44 (0) ** AFTER running WMIDiag:
    48901 15:56:44 (0) ** The WMI repository has a size of: ................................................................................... 26 MB.
    48902 15:56:44 (0) ** - Disk free space on 'C:': .......................................................................................... 297281 MB.
    48903 15:56:44 (0) **   - INDEX.BTR,                     5513216 bytes,      2015/04/15 03:52:21 PM
    48904 15:56:44 (0) **   - MAPPING1.MAP,                  76804 bytes,        2015/04/15 03:50:51 PM
    48905 15:56:44 (0) **   - MAPPING2.MAP,                  76804 bytes,        2015/04/15 03:52:21 PM
    48906 15:56:44 (0) **   - OBJECTS.DATA,                  22036480 bytes,     2015/04/15 03:52:21 PM
    48907 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    48908 15:56:44 (0) ** INFO: Windows Firewall status: ...................................................................................... ENABLED.
    48909 15:56:44 (0) ** Windows Firewall Profile: ........................................................................................... DOMAIN.
    48910 15:56:44 (0) ** Inbound connections that do not match a rule BLOCKED: ............................................................... ENABLED.
    48911 15:56:44 (0) ** => This will prevent any WMI remote connectivity to this computer except
    48912 15:56:44 (0) **    if the following three inbound rules are ENABLED and non-BLOCKING:
    48913 15:56:44 (0) **    - 'Windows Management Instrumentation (DCOM-In)'
    48914 15:56:44 (0) **    - 'Windows Management Instrumentation (WMI-In)'
    48915 15:56:44 (0) **    - 'Windows Management Instrumentation (ASync-In)'
    48916 15:56:44 (0) **    Verify the reported status for each of these three inbound rules below.
    48917 15:56:44 (0) **
    48918 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI)' GROUP rule: ............................................. ENABLED.
    48919 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI-Out)' rule: ............................................... ENABLED.
    48920 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (WMI-In)' rule: ................................................ ENABLED.
    48921 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (DCOM-In)' rule: ............................................... ENABLED.
    48922 15:56:44 (0) ** Windows Firewall 'Windows Management Instrumentation (ASync-In)' rule: .............................................. ENABLED.
    48923 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    48924 15:56:44 (0) ** DCOM Status: ........................................................................................................ OK.
    48925 15:56:44 (0) ** WMI registry setup: ................................................................................................. OK.
    48926 15:56:44 (0) ** INFO: WMI service has dependents: ................................................................................... 2 SERVICE(S)!
    48927 15:56:44 (0) ** - Internet Connection Sharing (ICS) (SHAREDACCESS, StartMode='Disabled')
    48928 15:56:44 (0) ** - SMS Agent Host (CCMEXEC, StartMode='Automatic')
    48929 15:56:44 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
    48930 15:56:44 (0) **    Note: If the service is marked with (*), it means that the service/application uses WMI but
    48931 15:56:44 (0) **          there is no hard dependency on WMI. However, if the WMI service is stopped,
    48932 15:56:44 (0) **          this can prevent the service/application to work as expected.
    48933 15:56:44 (0) **
    48934 15:56:44 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
    48935 15:56:44 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
    48936 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    48937 15:56:44 (0) ** WMI service DCOM setup: ............................................................................................. OK.
    48938 15:56:44 (0) ** WMI components DCOM registrations: .................................................................................. OK.
    48939 15:56:44 (0) ** WMI ProgID registrations: ........................................................................................... OK.
    48940 15:56:44 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
    48941 15:56:44 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
    48942 15:56:44 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
    48943 15:56:44 (0) ** WMI providers EXE/DLL availability: ................................................................................. OK.
    48944 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    48945 15:56:44 (0) ** INFO: User Account Control (UAC): ................................................................................... ENABLED.
    48946 15:56:44 (0) ** => WMI tasks requiring Administrative privileges on this computer MUST run in an elevated context.
    48947 15:56:44 (0) **    i.e. You can start your scripts or WMIC commands from an elevated command
    48948 15:56:44 (0) **         prompt by right clicking on the 'Command Prompt' icon in the Start Menu and
    48949 15:56:44 (0) **         selecting 'Run as Administrator'.
    48950 15:56:44 (0) **    i.e. You can also execute the WMI scripts or WMIC commands as a task
    48951 15:56:44 (0) **         in the Task Scheduler within the right security context.
    48952 15:56:44 (0) **
    48953 15:56:44 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
    48954 15:56:44 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
    48955 15:56:44 (0) **    privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
    48956 15:56:44 (0) **    to ensure that administrative privileges are granted. If a Local User account is used for remote
    48957 15:56:44 (0) **    accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
    48958 15:56:44 (0) **
    48959 15:56:44 (0) ** DCOM security for 'Microsoft WBEM UnSecured Apartment' (Launch & Activation Permissions): ........................... MODIFIED.
    48960 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\SYSTEM' DOES NOT match corresponding expected trustee rights (Actual->Default)
    48961 15:56:44 (0) **        - ACTUAL ACE:
    48962 15:56:44 (0) **          ACEType:  &h0
    48963 15:56:44 (0) **                    ACCESS_ALLOWED_ACE_TYPE
    48964 15:56:44 (0) **          ACEFlags: &h4
    48965 15:56:44 (0) **                    NO_PROPAGATE_INHERIT_ACE
    48966 15:56:44 (0) **          ACEMask:  &hB
    48967 15:56:44 (0) **                    DCOM_RIGHT_EXECUTE
    48968 15:56:44 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
    48969 15:56:44 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
    48970 15:56:44 (0) **        - EXPECTED ACE:
    48971 15:56:44 (0) **          ACEType:  &h0
    48972 15:56:44 (0) **                    ACCESS_ALLOWED_ACE_TYPE
    48973 15:56:44 (0) **          ACEFlags: &h0
    48974 15:56:44 (0) **          ACEMask:  &h1F
    48975 15:56:44 (0) **                    DCOM_RIGHT_EXECUTE
    48976 15:56:44 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
    48977 15:56:44 (0) **                    DCOM_RIGHT_LAUNCH_REMOTE
    48978 15:56:44 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
    48979 15:56:44 (0) **                    DCOM_RIGHT_ACTIVATE_REMOTE
    48980 15:56:44 (0) **
    48981 15:56:44 (0) ** => The actual ACE has the right(s) '&h14 DCOM_RIGHT_LAUNCH_REMOTE DCOM_RIGHT_ACTIVATE_REMOTE' removed!
    48982 15:56:44 (0) **    This will cause some operations to fail!
    48983 15:56:44 (0) **    It is possible to fix this issue by editing the security descriptor and adding the removed right.
    48984 15:56:44 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    48985 15:56:44 (0) **
    48986 15:56:44 (0) ** DCOM security for 'Microsoft WBEM UnSecured Apartment' (Launch & Activation Permissions): ........................... MODIFIED.
    48987 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\INTERACTIVE' DOES NOT match corresponding expected trustee rights (Actual->Default)
    48988 15:56:44 (0) **        - ACTUAL ACE:
    48989 15:56:44 (0) **          ACEType:  &h0
    48990 15:56:44 (0) **                    ACCESS_ALLOWED_ACE_TYPE
    48991 15:56:44 (0) **          ACEFlags: &h4
    48992 15:56:44 (0) **                    NO_PROPAGATE_INHERIT_ACE
    48993 15:56:44 (0) **          ACEMask:  &hB
    48994 15:56:44 (0) **                    DCOM_RIGHT_EXECUTE
    48995 15:56:44 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
    48996 15:56:44 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
    48997 15:56:44 (0) **        - EXPECTED ACE:
    48998 15:56:44 (0) **          ACEType:  &h0
    48999 15:56:44 (0) **                    ACCESS_ALLOWED_ACE_TYPE
    49000 15:56:44 (0) **          ACEFlags: &h0
    49001 15:56:44 (0) **          ACEMask:  &h1F
    49002 15:56:44 (0) **                    DCOM_RIGHT_EXECUTE
    49003 15:56:44 (0) **                    DCOM_RIGHT_LAUNCH_LOCAL
    49004 15:56:44 (0) **                    DCOM_RIGHT_LAUNCH_REMOTE
    49005 15:56:44 (0) **                    DCOM_RIGHT_ACTIVATE_LOCAL
    49006 15:56:44 (0) **                    DCOM_RIGHT_ACTIVATE_REMOTE
    49007 15:56:44 (0) **
    49008 15:56:44 (0) ** => The actual ACE has the right(s) '&h14 DCOM_RIGHT_LAUNCH_REMOTE DCOM_RIGHT_ACTIVATE_REMOTE' removed!
    49009 15:56:44 (0) **    This will cause some operations to fail!
    49010 15:56:44 (0) **    It is possible to fix this issue by editing the security descriptor and adding the removed right.
    49011 15:56:44 (0) **    For DCOM objects, this can be done with 'DCOMCNFG.EXE'.
    49012 15:56:44 (0) **
    49013 15:56:44 (0) **
    49014 15:56:44 (0) ** DCOM security warning(s) detected: .................................................................................. 0.
    49015 15:56:44 (0) ** DCOM security error(s) detected: .................................................................................... 2.
    49016 15:56:44 (0) ** WMI security warning(s) detected: ................................................................................... 0.
    49017 15:56:44 (0) ** WMI security error(s) detected: ..................................................................................... 0.
    49018 15:56:44 (0) **
    49019 15:56:44 (1) !! ERROR: Overall DCOM security status: ................................................................................ ERROR!
    49020 15:56:44 (0) ** Overall WMI security status: ........................................................................................ OK.
    49021 15:56:44 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
    49022 15:56:44 (0) ** INFO: WMI permanent SUBSCRIPTION(S): ................................................................................ 5.
    49023 15:56:44 (0) ** - ROOT/SUBSCRIPTION, NTEventLogEventConsumer.Name="SCM Event Log Consumer".
    49024 15:56:44 (0) **   'select * from MSFT_SCMEventLogEvent'
    49025 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
    49026 15:56:44 (0) **   'SELECT * FROM __NamespaceCreationEvent'
    49027 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
    49028 15:56:44 (0) **   'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy_EmbeddedObject"'
    49029 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
    49030 15:56:44 (0) **   'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy_Config"'
    49031 15:56:44 (0) ** - ROOT/CCM/POLICY, CCM_PolicyReplicationConsumer.Id="{9099D177-1AD6-46e6-BBC0-70F460786953}".
    49032 15:56:44 (0) **   'SELECT * FROM __ClassOperationEvent WHERE TargetClass ISA "CCM_Policy"'
    49033 15:56:44 (0) **
    49034 15:56:44 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
    49035 15:56:44 (0) ** INFO: WMI namespace(s) requiring PACKET PRIVACY: .................................................................... 3 NAMESPACE(S)!
    49036 15:56:44 (0) ** - ROOT/CIMV2/SECURITY/MICROSOFTTPM.
    49037 15:56:44 (0) ** - ROOT/CIMV2/TERMINALSERVICES.
    49038 15:56:44 (0) ** - ROOT/SERVICEMODEL.
    49039 15:56:44 (0) ** => When remotely connecting, the namespace(s) listed require(s) the WMI client to
    49040 15:56:44 (0) **    use an encrypted connection by specifying the PACKET PRIVACY authentication level.
    49041 15:56:44 (0) **    (RPC_C_AUTHN_LEVEL_PKT_PRIVACY or PktPrivacy flags)
    49042 15:56:44 (0) **    i.e. 'WMIC.EXE /NODE:"SSCRDS02" /AUTHLEVEL:Pktprivacy /NAMESPACE:\\ROOT\SERVICEMODEL Class __SystemSecurity'
    49043 15:56:44 (0) **
    49044 15:56:44 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
    49045 15:56:44 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
    49046 15:56:44 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 34 ERROR(S)!
    49047 15:56:44 (0) ** - Root/CIMV2, MSFT_NetInvalidDriverDependency, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49048 15:56:44 (0) **   MOF Registration: ''
    49049 15:56:44 (0) ** - Root/CIMV2, Win32_OsBaselineProvider, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49050 15:56:44 (0) **   MOF Registration: ''
    49051 15:56:44 (0) ** - Root/CIMV2, Win32_OsBaseline, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49052 15:56:44 (0) **   MOF Registration: ''
    49053 15:56:44 (0) ** - Root/CIMV2, Win32_DriverVXD, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49054 15:56:44 (0) **   MOF Registration: ''
    49055 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49056 15:56:44 (0) **   MOF Registration: ''
    49057 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_GenericIKEandAuthIP, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49058 15:56:44 (0) **   MOF Registration: ''
    49059 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49060 15:56:44 (0) **   MOF Registration: ''
    49061 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49062 15:56:44 (0) **   MOF Registration: ''
    49063 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49064 15:56:44 (0) **   MOF Registration: ''
    49065 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecAuthIPv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49066 15:56:44 (0) **   MOF Registration: ''
    49067 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49068 15:56:44 (0) **   MOF Registration: ''
    49069 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv4, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49070 15:56:44 (0) **   MOF Registration: ''
    49071 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49072 15:56:44 (0) **   MOF Registration: ''
    49073 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_Counters_IPsecIKEv6, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49074 15:56:44 (0) **   MOF Registration: ''
    49075 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_NETDataProviderforOracle_NETDataProviderforOracle, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49076 15:56:44 (0) **   MOF Registration: ''
    49077 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_NETDataProviderforOracle_NETDataProviderforOracle, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49078 15:56:44 (0) **   MOF Registration: ''
    49079 15:56:44 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49080 15:56:44 (0) **   MOF Registration: ''
    49081 15:56:44 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49082 15:56:44 (0) **   MOF Registration: ''
    49083 15:56:44 (0) ** - Root/WMI, ReserveDisjoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49084 15:56:44 (0) **   MOF Registration: ''
    49085 15:56:44 (0) ** - Root/WMI, ReserveLateCount, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49086 15:56:44 (0) **   MOF Registration: ''
    49087 15:56:44 (0) ** - Root/WMI, ReserveJoinThread, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49088 15:56:44 (0) **   MOF Registration: ''
    49089 15:56:44 (0) ** - Root/WMI, ReserveDelete, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49090 15:56:44 (0) **   MOF Registration: ''
    49091 15:56:44 (0) ** - Root/WMI, ReserveBandwidth, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49092 15:56:44 (0) **   MOF Registration: ''
    49093 15:56:44 (0) ** - Root/WMI, ReserveCreate, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49094 15:56:44 (0) **   MOF Registration: ''
    49095 15:56:44 (0) ** - Root/WMI, SystemConfig_PhyDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49096 15:56:44 (0) **   MOF Registration: ''
    49097 15:56:44 (0) ** - Root/WMI, SystemConfig_Video, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49098 15:56:44 (0) **   MOF Registration: ''
    49099 15:56:44 (0) ** - Root/WMI, SystemConfig_IDEChannel, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49100 15:56:44 (0) **   MOF Registration: ''
    49101 15:56:44 (0) ** - Root/WMI, SystemConfig_NIC, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49102 15:56:44 (0) **   MOF Registration: ''
    49103 15:56:44 (0) ** - Root/WMI, SystemConfig_Network, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49104 15:56:44 (0) **   MOF Registration: ''
    49105 15:56:44 (0) ** - Root/WMI, SystemConfig_CPU, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49106 15:56:44 (0) **   MOF Registration: ''
    49107 15:56:44 (0) ** - Root/WMI, SystemConfig_LogDisk, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49108 15:56:44 (0) **   MOF Registration: ''
    49109 15:56:44 (0) ** - Root/WMI, SystemConfig_Power, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49110 15:56:44 (0) **   MOF Registration: ''
    49111 15:56:44 (0) ** - root/ccm/LocationServices, ClientInfo, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49112 15:56:44 (0) **   MOF Registration: ''
    49113 15:56:44 (0) ** - root/ccm/LocationServices, ClientInfo, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    49114 15:56:44 (0) **   MOF Registration: ''
    49115 15:56:44 (0) ** => When a WMI performance class is missing (i.e. 'Win32_PerfRawData_TermService_TerminalServices'), it is generally due to
    49116 15:56:44 (0) **    a lack of buffer refresh of the WMI class provider exposing the WMI performance counters.
    49117 15:56:44 (0) **    You can refresh the WMI class provider buffer with the following command:
    49118 15:56:44 (0) **
    49119 15:56:44 (0) **    i.e. 'WINMGMT.EXE /SYNCPERF'
    49120 15:56:44 (0) **
    49121 15:56:44 (0) ** WMI MOF representations: ............................................................................................ OK.
    49122 15:56:44 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
    49123 15:56:44 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
    49124 15:56:44 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
    49125 15:56:44 (2) !! WARNING: WMI GET VALUE operation errors reported: ................................................................... 5 WARNING(S)!
    49126 15:56:44 (0) ** - Root, Instance: __EventConsumerProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
    49127 15:56:44 (0) ** - Root, Instance: __EventProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
    49128 15:56:44 (0) ** - Root, Instance: __EventSinkCacheControl=@, Property: ClearAfter='00000000000015.000000:000' (Expected default='00000000000230.000000:000').
    49129 15:56:44 (0) ** - Root, Instance: __ObjectProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
    49130 15:56:44 (0) ** - Root, Instance: __PropertyProviderCacheControl=@, Property: ClearAfter='00000000000030.000000:000' (Expected default='00000000000500.000000:000').
    49131 15:56:44 (0) **
    49132 15:56:44 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
    49133 15:56:44 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
    49134 15:56:44 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
    49135 15:56:44 (0) ** WMI static instances retrieved: ..................................................................................... 6304.
    49136 15:56:44 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
    49137 15:56:44 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 3.
    49138 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    49139 15:56:44 (0) ** # of Event Log events BEFORE WMIDiag execution since the last 20 day(s):
    49140 15:56:44 (0) **   DCOM: ............................................................................................................. 0.
    49141 15:56:44 (0) **   WINMGMT: .......................................................................................................... 0.
    49142 15:56:44 (0) **   WMIADAPTER: ....................................................................................................... 0.
    49143 15:56:44 (0) **
    49144 15:56:44 (0) ** # of additional Event Log events AFTER WMIDiag execution:
    49145 15:56:44 (0) **   DCOM: ............................................................................................................. 0.
    49146 15:56:44 (0) **   WINMGMT: .......................................................................................................... 0.
    49147 15:56:44 (0) **   WMIADAPTER: ....................................................................................................... 0.
    49148 15:56:44 (0) **
    49149 15:56:44 (0) ** 34 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
    49150 15:56:44 (0) ** => This error is typically a WMI error. This WMI error is due to:
    49151 15:56:44 (0) **    - a missing WMI class definition or object.
    49152 15:56:44 (0) **      (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
    49153 15:56:44 (0) **      You can correct the missing class definitions by:
    49154 15:56:44 (0) **      - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
    49155 15:56:44 (0) **      Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
    49156 15:56:44 (0) **            (This list can be built on a similar and working WMI Windows installation)
    49157 15:56:44 (0) **            The following command line must be used:
    49158 15:56:44 (0) **            i.e. 'WMIDiag CorrelateClassAndProvider'
    49159 15:56:44 (0) **      Note: When a WMI performance class is missing, you can manually resynchronize performance counters
    49160 15:56:44 (0) **            with WMI by starting the ADAP process.
    49161 15:56:44 (0) **    - a WMI repository corruption.
    49162 15:56:44 (0) **      In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
    49163 15:56:44 (0) **      to validate the WMI repository operations.
    49164 15:56:44 (0) **    Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
    49165 15:56:44 (0) **          executing the WriteInRepository command. To write temporary data from the Root namespace, use:
    49166 15:56:44 (0) **          i.e. 'WMIDiag WriteInRepository=Root'
    49167 15:56:44 (0) **    - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
    49168 15:56:44 (0) **      the WMI repository must be reconstructed.
    49169 15:56:44 (0) **    Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
    49170 15:56:44 (0) **          otherwise some applications may fail after the reconstruction.
    49171 15:56:44 (0) **          This can be achieved with the following command:
    49172 15:56:44 (0) **          i.e. 'WMIDiag ShowMOFErrors'
    49173 15:56:44 (0) **    Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
    49174 15:56:44 (0) **          ALL fixes previously mentioned.
    49175 15:56:44 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
    49176 15:56:44 (0) **
    49177 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    49178 15:56:44 (0) ** Unexpected, wrong or missing registry key values: ................................................................... 1 KEY(S)!
    49179 15:56:44 (0) ** INFO: Unexpected registry key value:
    49180 15:56:44 (0) **   - Current:  HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 0
    49181 15:56:44 (0) **   - Expected: HKLM\SOFTWARE\Microsoft\WBEM\CIMOM\Logging (REG_SZ) -> 1
    49182 15:56:44 (0) **     From the command line, the registry configuration can be corrected with the following command:
    49183 15:56:44 (0) **     i.e. 'REG.EXE Add "HKLM\SOFTWARE\Microsoft\WBEM\CIMOM" /v "Logging" /t "REG_SZ" /d "1" /f'
    49184 15:56:44 (0) **
    49185 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    49186 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    49187 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    49188 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    49189 15:56:44 (0) **
    49190 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    49191 15:56:44 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
    49192 15:56:44 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
    49193 15:56:44 (0) **
    49194 15:56:44 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!.  Check 'C:\USERS\CONN.LOMBARD\APPDATA\LOCAL\TEMP\WMIDIAG-V2.1_2K8R2.SRV.SP1.64_SSCRDS02_2015.04.15_15.48.25.LOG' for details.
    49195 15:56:44 (0) **
    49196 15:56:44 (0) ** WMIDiag v2.1 ended on 15 April 2015 at 15:56 (W:110 E:41 S:1).
    This seems to be the biggest problem:
    48960 15:56:44 (1) !! ERROR: Actual trustee 'NT AUTHORITY\SYSTEM' DOES NOT match corresponding expected trustee rights (Actual->Default)
    This seems to be the second biggest error (and there are a few of them):
    0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    I have tried:
    winmgmt /resyncperf
    winmgmt /verifyrepository
    winmgmt /salvagerepository
    winmgmt /resetrepository
    I have also tried registering the mof files with
    MOFCOMP <FileName.mof>
    Lastly, I even disabled the WMI service, renamed the Repository folder, and had it rebuild the repository.
    I got stuck on re registering the 'NT AUTHORITY\SYSTEM' (I think it is in the Components section in Administrative tools), as I could not find clear instructions on exactly how to go about it.
    Chkdsk found no errors
    Sfc /scannow found no errors
    winmgmt /verifyrepository finds no errors.
    I'm hoping someone here might be able to steer me in the right direction to get this resolved, as I do not want to rebuild a server that hosts a connection broker and has over 100 user profiles on it, as well as some very annoying and finniky LOB apps installed,
    which will have to manually be reinstalled for each profile.

    Hi,
    Here is a blog regarding how to fix WMI issue might be useful to you:
    Fixing WMI issues Using Batch Script
    http://social.technet.microsoft.com/wiki/contents/articles/6887.fixing-wmi-issues-using-batch-script.aspx
    In addition, you mentioned Remote Desktop Servers are in a cluster setup, would you tell us how did you create the cluster?
    As far as I know, with RD Connection Broker, we don’t need to create a cluster but just add multiple RD session hosts into one collection, then RD connection Broker would redirect sessions automatically.
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • ACE 4710 Probes on other servers than the real server

    Hi,
    I wanted to know if there is a means to configure a probe that is independent of the real servers.
    The aim is to configure a probe a real server but also probe another intermediate server which is not in the server farm.
    The objective is to declare the real server down if its probe fails but also the probe to an intermediate server fails as well as a or condition.
    From the document, there is no mention of it.
    But is there a means to do it.
    Thanks.

    Hi Ashley,
    i see it is not mentioned anywhere in document but i think ou should be able to bind two probes with real server of which one probe is actually probing another server.
    I would configure one probe let's say TCP based and bind it with serverfarm. Then i would configure another probe TCP based and define IP address in that probe (the other server IP which we need to probe) and bind this probe with same serverfarm. Serverfarm will not have this rserver added. And then i would configure "fail-on-all" and test if that works for you.
    i know you can set probe on redirect server/serverfarm which actually probes another real server so logically should work for normal host rserver as well. But i have never tested it myself.
    Regards,
    Kanwal

  • How to view all user_source on others servers from one admin server?

    Hello. Thank you for helping.
    I am not able to view the source for other schemas locally or on remote servers, depending on the user logged, only for that schema, or something like that.
    I use this command to view the source of a procedure:
    select line, text
    from user_source
    where type='PROCEDURE'
    and name='MY_PROC1'
    order by line;
    or this:
    ...from sys.user_source...
    or this:
    ...from sys.user_source@dblink1...
    Any suggestions are greatly appreciated.

    Okay, the DDL method is not going to work. Let me go back to my original question:
    I use this command to view the source of a procedure, but I still cannot select source from a remote server across a dblink. How do I specify the remote schema with the user_source?
    select line, text
    from user_source
    where type='PROCEDURE'
    and name='MY_PROC1'
    order by line;
    or this:
    ...from sys.user_source...
    or this:
    ...from sys.user_source@dblink1...
    To APC: Regarding your comments about reading the docs, understanding privileges, decent source control and configuration management, etc., I would like to offer a few arguments which I think invalidates these (your entrenched) assumptions about proper Oracle development and the use of forums. Contact me offline if you are interested in learning more about the superior approach to development my work embodies.
    Edited by: user652257 on Jun 23, 2009 12:50 PM

Maybe you are looking for

  • Problem accessing an adjacent remote network over VPN (2 asa5505)

    Hello all, I have 2 ASA5505 (CORP and remote) connected via VPN. The remote site contains 2 subnets (192.168.1.0/24 and 192.168.0.0/24 (for remote VPN users)). The corp site has 192.168.2.0/24 directly connected to ASA5505 and an adjacent network con

  • How can i get my laptop screen to display on a second monitor after closing the laptop

    I have a 13" MacPro, love it, but its display is a little small for how far away i sit at my desk. I have a second 21" monitor that i would like to use for this purpose, but whenever i close the laptop screen it shuts down the signal for the second s

  • Importing music from your iPod onto iTunes

    I lost my iTunes library because my laptop crashed. I have all of my songs saved, but my laptop is gone. My friend has a laptop with iTunes, but if I import my music from my iPod onto their laptop will it erase all of thier music?

  • Photoshop CS5 & Dual Monitors

    I have Design Premium incl. Photoshop CS5.  Recently I was lucky enough to get a second monitor (sweet) HOWEVER I am having serious issues with Photoshop working.  If I drag the whole program or just a new window with an image, (just) the image is bl

  • Stock take for sales returns and vendor consignment

    Dear Gurus, Can you help which T-code to use to create physical inventory document (batch input) for sales returned stocks (status: returns) and vendor consignment stock? I have been searching the posts here but looks like not able to found similar p