Other system has higher release than XI syst. in landscape

Hi,
We are running an XI 3.0/NW04 system and we're currently planning to upgrade our BW 3.5/NW04 system to BI 7.0/NW04s.
In the Master for NW04s you can read the following :
"For PI, it is a prerequisite that no other system in your system landscape has a higher release than the PI system. If you want to upgrade or install an application in your system landscape, you first have to make sure that the current release of the PI system is on the same release level ‒ if required, you have to upgrade the PI system first to the new or a higher release."
After having read this, my understanding is that we have to upgrade our XI system before upgrading the BW system.
What are the consequences/implications running a system landscape where a system has a higher release than the XI-system ?
Thanks in advance for help and hints.
Rgds,
Christian

Hi Christian,
The implications are, PI as the highest release is the only supported combination.  It is possible that other combinations may work, but they are not tested by SAP and, in the case of any issues, SAP Support will tell you to upgrade your PI system to the highest release.
Best Regards,
Matt

Similar Messages

  • Compare dates coming form Source system & update higher one in target syste

    hi all,
             Mt reqt is to compare dates coming from source system & update highere one
    Ex--) E1EDP01 has been repeated 3 times in Idoc segemnt E1EDP20 , then date with higher one need to be updated in target system
    like 14/12/08
          15/12/08
          16/12/08
    Here 16/12/08 need to be updated first & then the other ones one by one.
    Anybody guide me in comparing these dates functionality .
    Send me the code !
    Regards
    Chaithanya

    Hi Michael,
                     I was unable to trace the exact issue of how to track  E1EDP01 Dates & compare it.
    I had created UDF to compare dates coming from E1EDP01 Segment
    following is my code --->
    // This UDF return 1 value for highest date and 0 for not highest date.
    DateFormat mydateformat = new SimpleDateFormat("ddMMyyyy");
    Date mydate1 = null;
    Date heightDt = null;
    for (int i=0; i <a.length; i++)
      if (a<i>.equals(ResultList.CC)) continue;
      try{
         mydate1 = mydateformat.parse(a<i>);
         if (i==0)
          heightDt  = mydateformat.parse(a<i>);
         if  (heightDt .before(mydate1))
         heightDt  = mydate1;
    catch(Exception e){}
    //result.addValue(  mydateformat.format(heightDt));
    for (int i=0; i <a.length; i++)
    try{
    mydate1 = mydateformat.parse(a<i>);
    if  (heightDt .equals(mydate1))
    result.addValue( "1");
    else
    result.addValue( "0");
    catch(Exception e){}
    My Problem here is in my Idoc if there are  Multiple E1EDP20 segments & here date would be repeated 4 times . I have to compare highest date out of 4 & send it to the target system.
    which I have done it, but here my problem is  the segment E1EDP01 is repeated & iam unable to find highest date individually to the node level.
    Sorry I should have explained this before only.
    Can Anyone guide me in comparing the date at segment level.
    Regards
    Chaithanya

  • EXP utillity has higher version than database - export failed !

    Hi,
    I have a Oracle8 Enterprise Edition Release 8.0.5.0.0 database on our server and I have installed a 9i client on my PC. Now I have to use the export utility to export a specific table from our DB, but as I read from 'Oracle9i Database Utilities' book:
    "The version of the Export utility must be equal to the lowest version of the source or target database".
    So, I guess I need to install a 8.0.5 client on my PC (I have W2K) but nobody can give me the install CD in the company:(
    I've looked on the OTN page if I can find the needed version, but I found only the 8i (8.1.7) install kit. Do you think it shall work the EXP utility if I install that ? Or can I find somewhere else the 8.0.5 install kit ?
    Thanks:
    Szilard
    PS: the error message what I got when I tried to export with 9i client from 8.0.5 DB:
    C:\exp user/passw file=myexp.dmp tables=emp;
    EXP-00056: ORACLE error 2248 encountered
    ORA-02248: invalid option for ALTER SESSION
    EXP-00000: Export terminated unsuccessfully
    , but the same command line from a 9i DB worked...

    Since your target server is 8.0.5, you should have the EXP utility from a 8.0.x versions. Anything higher will not work.
    HTH.

  • Print the report on page has width larger than height and not landscape mode

    Hi,
    I'm trying to print report on page (Width: 18cm, Height: 13cm) which the width larger than the height.
    The problem is windows keeps changing the page oreintation to landscape and when I change it back to portrait its changing the width to 13cm and height to 18cm.
    I'm using dot matrix printer to print the report, if i put Landscape , printer is printing the text in horizontal.
    Already i have tried to setup the custom for on printer, and used custom page size but it is changing to landscape.
    I need to print the report with out preview, direct print top printer, NO PDF....
    Thank you .....

    Hi Anil,
    After testing the issue in my environment, I can reproduce it. When I set (Width: 18cm, Height: 13cm) as the Report Page size, it would automatically convert Orientation from Portrait to Landscape. Because the Orientation displayed is dependent on the page
    width and page height of the report.
    But in my scenario, the Orientation option just change the Width and Height sizes, it couldn’t affect the text rotation. I guess this issue can be caused by the printer and printer driver, please try to update them. Reference:
    http://stackoverflow.com/questions/15244336/printing-in-landscape-or-portrait-automatically-rotates-text-ssrs?lq=1
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Development in a different Release than the target system ?

    Dear all,
    a special guy in our project wants to develop in a BW development system that have a higer Patch Level / Release than the target BW system (Where the Development has to be transported in). Does anybody know a source from SAP or could give me a hint to get a information (best from SAP), beacause I think that is highly critical.
    Thanks
    DiDi

    Hi,
    Please check if '''Open new windows in a new tab instead''' is enabled in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > '''Tabs'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Tabs%20panel Options > Tabs]. If the problem persists, please also check if this happens in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. If the new profile is okay, you can later [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile?s=profile&r=1&e=sph&as=s copy the needed personal data] from the old profile. Firefox stores your personal data and settings in [http://kb.mozillazine.org/Profile_folder another location (profile folder)] separate from its [http://kb.mozillazine.org/Installation_directory files/folder]. A new profile would have the default Firefox settings ('''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Options%20window '''Options'''], and [http://kb.mozillazine.org/About:config about:config] ), and usually would also be empty of any '''Extensions''' and themes ('''Appearance''') in Tools > Add-ons) and their settings. Also, a new profile would have no previous stored website data/settings etc., ('''Tools''' > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History '''Clear Recent History''']).
    [https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
    [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder & Files]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]

  • Unable to include report viewer web part. Error is, assembly has a higher version than referenced assembly

    I am making a web part in VS 2010 for SharePoint 2010. The web part uses Report Viewer control. The files I have referenced in my project with "Copy Local = True" option are:
    Microsoft.ReportViewer.Common.dll  
    Microsoft.ReportViewer.WebForms.dll
    Both are version 10 files.
    When I build the project it works fine. But when I add this web part in a page it shows following error.
    Compiler Error Message: CS1705: Assembly 'MySolution, Version=1.0.0.0, Culture=neutral, PublicKeyToken=8acc41a360fa228d' uses 'Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' which has a higher version
    than referenced assembly 'Microsoft.ReportViewer.WebForms, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a'
    I have already installed both Report Viewer 10 redistribute able and its SP1 but no luck. Also copied these DLLs to my SharePoint site bin folder. Did iisreset many times. .Net framework is 3.5 and OS is Windows Server 2008 R2.
    How to fix this issue?

    Fixed it by updating my web.config which was referencing version 9 instead of 10.

  • Our system has detected an unauthorized login attempt to your AppIeID from an IP address location different than one you usually use. In order to protect your account, we will disable your AppleID due to our concern for the safety and integrity of the App

    Our system has detected an unauthorized login attempt to your AppIeID from an IP address location different than one you usually use.
    In order to protect your account, we will disable your AppleID due to our concern for the safety and integrity of the AppIe community.
    In order to confirm that you are the rightful owner of this account, we recommend that you click here: My Apple ID.
    I received this e-mail during the night and wondered if is genuine?

    It's a scam to steal your Apple ID and password.
    Delete it.

  • How to fix "More than one receiving system has been specified for the BAPI"

    Due to patching the HR system I am testing the functionalities in our test environment before patching the production system. When doing a hiring action (in our test environment) I get this error message at infotype 0000 when I try to save:
    "More than one receiving system has been specified for the BAPI (AcctngServices, CheckAccountAssignment)"
    It is message no. B1811
    My first suggestion weas that it could be the presence of dual connections in SALE, but disabling one of them didn't help.
    Since the Basis team is currently patching the HR system I wonder if that has any affect that might end out in the above error.
    Anyone who can help me out here? Please?

    Usually, when you have HR and FI on separate boxes, certain FI information (e.g. cost center) do not physically locate on HR box. Instead of replicating these data into HR for integrity check, you have an option (for a few countries) of remotely connecting from HR box to FI to do these checking though BAPI. I think this is the scenario you have (i.e. when doing the hiring, a new ee will be assigned to a personnel area which in turn default a cost center which SAP would need to check for integrity).
    Please go into distribution model, and check if for some reason, this is set up to go to to more than 1 destination for HR accounting integrity check.
    Rgds.
    Edited by: Ted Dinh on Jun 12, 2009 8:55 AM

  • Has SAP released Web Tools for a 64 bit system?

    Has SAP released Web Tools for a 64 bit system? It was my understanding earlier in the year that SAP would be releasing WebTools in the 3rd quarter 2008 for a 64 bit system. Does anyone know the status of this release? Thank you, Vicki Merritt

    We have a test build that enables 32-bit emulation of the synch manager and synch service, but not for the website.
    FP1 is tentatively scheduled to go into rampup in November, and we are still investigating how to get the website to run in 64-bit environment.
    This test build of the Synch Manager doesn't show the B1 db version but we have successfully synchronized our test company databases with it and so far no major issues.
    You can contact me if you would like to give it a try.

  • Please can anyone help with the continuing password rejection problem with email.Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.

    I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
    On the password and keychain issue that your post is all about.  I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
    The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
    Two tips I can share, at least with webmail access:
    1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
    2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
         I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
    Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
    BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
    From my experimentation, here's my observation:
    1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
    2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
    The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta.

  • HT1657 I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

    I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

    I found my answer in another Thread and it worked... so for anyone who needs it, here it is:
    https://discussions.apple.com/message/19134562#19134562
    Had the same problem and spoke with Apple Support. They had me reset the System Management Controller:
    Shut down the computer. With the computer off, on the left hand side of the keyboard press shift+control+option along with the power button simultaneously and release. Wait 5-10 seconds and restart the computer.
    This solved my problem and I was immediately able to purchase, download, and play an HD movie from iTunes w/o any error message.

  • Help! my windows PC with Vista will not dowload itunes 10.7.  It gives me an error message: Your system has not been modified

    Help! my windows PC with Vista will not dowload itunes 10.7.  It gives me an error message: Your system has not been modified.I
    I have tried unistalling the current version I had which was 10.6.3, defragging and running a security scan. Now, the highest version I can get is 10.4.1. for some reason I cannot dowload itunes 10.5 or higher as it gives me the same message which is what I need to connect and update my iphone.  Anyone facing the same issue or can point me in the right direction?

    You may get better information on that error message by reposting in the iPhone forums:
    iPhone
    It's also possible that newer iPhone updates want an OS higher than Tiger. Post the specs of your computer and we can see if an OS upgrade is possible. There are a large number of G4 variants with different capabilities, so giving us something more than  just "G4" will get you help faster.

  • Down payment amount cannot be higher/lower than the preset value Error

    Hello.  Can anyone help me with this error.  When creating a down payment request from a sales order with a billing plan, I get the message 'Down payment amount cannot be higher/lower than the preset value' and the document isn't released to accounting.  When creating the sales order, I included a condition type that I created.  The billing plan then calculates the down payment request value with the total sum i.e net value plus condition value.  Upon creating the down payment request in VF01, I get this message.  I did a test and noticed that, if the condition is not included in the sales order, the down payment request is created without errors.  How do I correct this?  Thanks for you anticipated response.

    Hi
    As you are getting error, 'Down payment amount cannot be higher/lower than the preset value' ,please check the total value of the document.So in the sales document ,billing plan check what is the invoice value for the first billing date , also check what is the sales order value.Secondly what is the condition type that has been created and for what purpose it is being used.
    Regards
    Srinath

  • "Your system has run out of application memory"! Help, please! Thanks!

    Hi,
    Just got the unsettling message saying "Your system has run out of application memory" and I was instructed to close down applications I wasn't using, including browsers, or I might have problems with my computer. Yeesh. This is scary. Is the solution to buy more RAM? Bear with me, I really don't know what to do, and I'd appreciate your help.
    Thanks,
    Kcat
    Tried to update my product listings, but it wouldn't work. I have OS X Mavericks, 10.9.2 on my iMac desktop.

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
    A long-running process with a memory leak (a kind of bug)
    Not enough memory for your usage pattern
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
    View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command: 
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the  leaks(1) man page and the Apple developer documentation for details.

  • "You system has run out of application memory"

    I'm constantly getting this error now.  "You system has run out of application memory"
    machine specs are -
    MACBookPro Retina. 10,1
    2.7 i7
    16 GB 1600 MHz DDR3
    GT 650M 1024 MB
    OSX 10.9.4 (13E28)
    750 GB Solid State drive with 211 GB free.
    does any know what may being going on?  What can I do to fix?
    Thanks in advance for your help.
    Brian

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
              A long-running process with a memory leak (a kind of bug)
              Not enough memory for your usage pattern
    Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
              View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the  leaks(1) man page and the Apple developer documentation for details.

Maybe you are looking for