Other templates? SUPER simple??

Does anyone know if there are additional templates for iWeb available to download somewhere?
It drives me crazy they didn't make one that was COMPLETELY stripped down. Even the WHITE and BLACK one have the cheesy, immediately identifiable as iWeb, image cast shadow that I don't want.
Any help greatly appreciated.
-Rolyn

Hi,
I have seen a couple of sites w/ templates for free or for sale. Check out these:
http://www.ilifestuff.com/
http://lamiavia.com/Lamiavia/Welcome.html
http://web.mac.com/sboben/iWeb/11Mystics/iWeb_Templates.html
jabberwock
iBook G4 Mac OS X (10.4.6) http://www.the-camera-obscura.com

Similar Messages

PSE9 - album - Other templates?

Hi,
I'm new on PSE9, having used before PSE3. I am creating a web gallery on my hard drive using the "Globe 3D" template from PSE9.
In the result, I cannot see how to spin the globe: in general, as soon as the mouse is over the globe, the image pops up. At one point in time, I had the globe spining instead of the image popping up, which was good, but I don't know how I did it. I tried various combinations of shift, alt, ctrl, right or left click..
Note: I tried with different PC (XP, Win7), different browsers (Mozilla, IE) and have same unstable results (one time it works, the other it doesn't).
EDIT: Found it: keeping the mouse pressed and moving slow enough for the program to react
My question: is there somewhere a way to add web gallery templates to PSE9? I was used to the PSE3 "classic" templates, and I don't see in PSE9 a template as simple and easy to browse. My preference would be to have a rapid navigation in thumbnails and the option to expand in full screen display and navigate full screen from there, with the text options from PSE3 (possibility to add a few lines of info) : I don't see such a template in PSE9. And the Globe 3D template is sooo hungry in processing power!
(Last comment: Very counter intuitive to have to make double right click instead of left click to select a template! I am losing lots of times from the PSE ergonomy failures...)
Thank you

11mystics.com is a great place for iWeb themes. Suzanne is busy recreating all of her 'for purchase' iWeb 06 themes to be compatible with '08, but promises some free ones as well as soon as the old ones are converted.

Probably super simple...ACL/VLANs

I have a VLAN 6 that is dedicated to a Partner organization (they share our bandwidth and schedule conference rooms with our Exchange).
Question is how do I configure ACLs to direct ALL traffic to and from Partner, exception of accessing our Outlook Web Access and DNS servers in VLAN 1, and our websites in VLAN 2 ?
This is probably super simple but I keep ending up with traffic going where I don't want it to. Thanks so much...
(And if anything else seems wacky about this setup, blame the last IT guy)

What is the platform you are using??? ASA, router??
Thanks,
Varun Rao
Security Team,
Cisco TAC

Super Simple Flash Game Tutorials?

I'm looking for some super simple flash game tutorials that students can complete in about an hour. I don't want a lot of actionscript, but some is necessary and that's fine. Drop any links you may know of or any book titles. I don't mind buying a book if it is what I'm looking for. Flash CS5

This is an old technique but it works great using php:
http://www.flashkit.com/tutorials/Games/High-sco-Glen_Rho-657/index.php

Combine LR Pages with other templates, How?

Just bought LR pages from The Turning Gate. There is some info on their
website about combining LR pages with other templates. But I already
get stuck reading this information. Is there someone who would explain
this to me? I know a lot about photoshop, but this is something different.
Best regards, Marion

Hi Sean,
Thank you for the advice
best regards, Marion
Op 17 jun 2009, om 13:24 heeft Seán McCormack het volgende geschreven:
You really need to deal with Matthew on this Marion.
>
Here's the relevant support link:
>
http://www.lightroomforums.net/showthread.php?t=1527
>

HT5071 are there any other templates we can choose from?

Are there any other templates I can choose from or I can buy?

Yes - see the Mac App Store and try Google.

Are there any other templates available besides those that come with numbers?

Are there any other templates available besides those that come with Numbers?

Hi David,
If you have Numbers '09 there is a Checking Register template that might suit.
Numbers can open Excel templates and documents. Do a web search for checking register spreadsheet.
Regards,
Ian.

Guest Book or other templates

Are there any other templates available from Apple or others?
I'm really looking for a way to add a guest book. Any suggestions on that?

You can use iComment which is a really awsome App made by Chad Brantly, Alias C. Brantly It's a app which helps you put a comments feature into your blog with the help of a Halso Scan account http://haloscan.com
You can find more about iComment here http://web.mac.com/cbrantly/iWeb/Chad/Blog/8952037B-38C8-4241-BB1B-2968605FBEDD. html
Internet Wiz™ Click Me!

Questions on making a super simple dvd

I have a few (probably simple!) questions about making a dvd with iDVD. I made the movie in iMovie using the computer's camera and imported it into iDVD no problems. 1st question - how can I put track markings in? 2nd question - I don't want any fancy themes or anything, just a simple black page at the beginning with a title, or even nothing at all, just straight into the movie. How can I do this? 3rd question - I recorded it with an external mic, but the sound is quite soft. I increased it to 150% in iMovie (any more than that and it started to have an electronic kind of buzz); can I increase it anymore in iDVD?
Thanks for your help!

ad 1) in iM, click on 'help', type 'chapter markers'
ad 2) switch to Structure View in iDVD and drag movie into the Autostart Box
you have about 4.5 options to create a non-themed DVD, read advice on my website:
http://karsten.schluter.googlepages.com/nothemedvd
and, by standards, a DVD HAS to have a menu.. if someone pushes the 'Menu' button on the remote, the disk HAS to offer some.. any.. content..-
ad 3) no, iDVD is no editor... 'share to Mediabrowser' in iM, launch Garageband, open project from Media Browser and try to 'push' volume in the audio processor of iLife.. share again, to get audio changes in iM ..

Not able to access the module from user level i.e., other than Super user.

Hello Friends,
I created company with super user and normal user, for a normal user gave the rights of sales. When logged in with normal user try to create sales order i am experiencing following system message "To generate this document, first define the numbering series in Administration module [Message 131-3]".
Could you please advise me in this regard.
Thanks,
Rayudu

Hi,
Please check the following thread which is being discussed:
Re: "Define the numbering series in Admin module"
For the issue you have reported, kindly refer Note 1057873, which will resolve your issue.
Note says:-
Symptom
When trying to open a document a user gets the system message:
'To Generate this document, first define the numbering series in the Administration module'
Other terms
Authorizations, Document Numbering, Series, access
Reason and Prerequisites
SAP Business One Functionality, Consulting
Solution
A document numbering series have been defined and the user have authorisation to the document type in:
Administration -> System Initialisation -> General Authorisations -> Sales-AR/Purchasing-AP
All document numbering series are also given a Group.
Administration -> System Initialisation -> Document Numbering
Double click to the left of the row to view the existing numbering
series for the document type. The field 'Group' is here. By default this value is 1.
For the Groups there is a separate authorisation.
Administration -> System Initialisation -> Authorisations -> General Authorisations -> Administration -> System Initialisation -> Series
After expanding the 'Series', give the user authorisation to the
Serie/Group that is defined for the document numbering serie it is trying to open.
Also, check for more similar threads in the forum which could help you.
Regards,
Jitin

Is it possible to add other templates to the print module?

If so, how? And is it possible to make a "package." In other words a template with multiple pages.
For instance drop in one image and have it auto populate say 1 8x10 2 5x7 4 4x6 and 16 wallets on 81/2" x 11" sheets.
Would be really great if you didn't have to leave Lightroom to print basic school packages.
Thanks,
Drew

Thanks for the info. Just wanted to make sure I wasn't missing something.
It would work for me if it didn't mix and match on a page. But, it would need to be able to have a "package" of multiple pages. Just something basic. Not looking for a full fledged program or rip.

NWDI CTC ran successfully, any other templates needed to run?

I ran the CTC template and it completed successfully. The domain is setup for CMS. However the CMS inbox directory is not setup in the file system. Are there any other steps required to setup the inbox? Do I need to run any additional templates?
Thanks
Mikie

no goey

Use pages from other templates...not just the one you chose.

Is there a way to choose a page from another template besides the one I started with. For example if I choose the "School Report" template, but want to also use a page from the "Lesson Plan" template, how can I do this. If you click add new page, it only gives you the initial template pages. I tried opening a new template and copying and pasting the page I wanted, but it does not work.

My guess is that it's because the objects are floating ones.
If you switch them as inline one, you will be able to copy the page, sometimes after inserting section breaks.
Yvan KOENIG (from FRANCE mardi 10 février 2009 21:19:34)

Download other templates?

Hey everyone!!
I have this big project I have to present in the beginning of April for the french baccalaureate (TPE), so I want to make a magazine and there's not enough templates in Newsletters section. Plus, I have trouble in making templates of my own.
So, if there's any way I can download some new templates from a website or something like that, I would be very grateful!
Thanks a lot in advance,
Camille

There are several options for templates you can use in Pages. First, there those submitted by other users & available at iWork Community. There are also those available for Microsoft Word. Most templates for Word will open nicely in Pages. I haven't come across one that doesn't, but that doesn't mean someone else might. The only thing to watch for is the file extension. Some Word templates have an extension other than .doc. You will still be able to use them, just change the extension to .doc in the Finder or Pages won't recognized them as Word files. Of course, you can't change just any file's extension to .doc & have Pages open it. It must be a Word document.

3D Stickies? Other Templates?

The default stickies are incredibly boring. How do I make them 3D? I did it before but I forgot how. Is there a site that has different templates for it?

The answer currently is no. Just for windows they have different versions.

Other templates? SUPER simple??

Similar Messages

Maybe you are looking for