Other workstartion want to see the portal site

Kindly Please
If I have developed a main portal page with many content areas inside in one machine containing oracle 8.17 release 3, oracle 9ias and running Win 2000 platform. Once everything is ready, I can see under a browser(netscape) at http://mysite.newportal.com
where mysite is computer name and newportal.com is the DNS suffix defined in Windows. Let's call this computer be A
However, if other workstartions want to see such site, they cannot see and return "mysite.newportal.com cannot be found". If I type the IP address of computer A, I can see the setup page, which appear something like "Apache ...." and if I click any link it will return same message "mysite.newportal.com cannot be found"
Please help me how to do.
Much thanks

When I want a user to access my main portal page, they have to use this link.
http://socsbo1.scs.uiuc.edu/pls/portal30/url/page/socsbo_main
You may need to give your other user a mor detail url to use.
I am still early in using Oracle Portal so there may be an easier way.
If they want to save the url as a Favorite in IE, they must create the Favorite link manually instead of clicking Add As Favorite as the fully resolved url is in the address area after the site is reached. The fully resolved address does not display the portlets correctly, when accessed again.

Similar Messages

FaceTime: I want to see the other guy, not myself

I'm self-conscious. I've looked for answers online but found nothing that directly addresses the issue. I've even seen something as ridiculous as having plastic surgery to improve your appearance of FaceTime. To me, using FaceTime is like hearing myself on a tape recorder "Eeew! THAT'S how I sound?!" I don't mind being seen, but I don't want to see myself - I find it distracting and my attention wanders as I critique any flaws in my appearance. This doesn't happen in a normal face-to-face conversation, why should it happen in a FaceTime conversation?
I want to see the person on the other end. I want that person to see me. That's what FaceTime is all about but...I want to be able to eliminate from MY screen that little box with myself in it. That doesn't seem like too much to ask of Apple. Maybe it can already be done and that's what I'm trying to find out. Anyone out there with any tips?
Thanks,

Yeah, I get that and it makes sense. I just wish I had the option of making it somewhat less than perfect by eliminating the reflection box. When I'm on my macbook air, I can cover my image using a small window in Finder. I'll have to figure out a way on my iPhone. Maybe a small removable sticky note kept in my case for that purpose. Your reply is much appreciated and you were helpful. I looked at the link you shared but it doesn't really have any solutions - just the knowledge that others feel as I do. And you helped with terminology - I didn't know "that little box with myself in it" is called a reflection box. Thank you! :-)

I want to see the LDAP set up for EP 6.0 sp2

Hi,
I want to see the LDAP set up for EP 6.0 sp2.
And also the see the entries under portal and corporate LDAP.
Kindly let me know at the earliest.
Swetha

Are you talking about datasource of EP or LDAP connectors?

Other user can not see the data from the workbook

Hi Friends,
I created a workbook with some worksheets in a Business area. The owner of the workbook has no problem to view all the worksheets and get all the data returned.. I granted all the neccessary privileges to other users ,they could see the workbook, but no data returnd for the query results. Tried refresh the worksheet, same no data retrieved.Checked the SQL inspector and the plan, it showed the correct paths and execution plan without any errors there. The same query run in SQL plus by other users returned data correctly.
By the way, I had a summary folder in the workbook. During the troubleshooting, I dropped this summary folder, still the same no data return for other users.
Any body happen to know the cause or has some ideas on this issue?
The discoverer administrator verson is 9.0.4.00 and the PLUS /Viewer is 9.04.45.02.
Thank you very much,
J.K

Hi All
The scheduling of reports, as you have probably noticed, requires that the scheduling privilege within Discoverer Administrator tool be granted to the user NOT to a role. Scheduling will not work if you attempt this. The reason for this is that these two SYS grants must go to a user:
GRANT SELECT ON SYS.V_$PARAMETER
GRANT EXECUTE ON SYS.DBMS_JOB
The user will also need to have these grants:
CREATE PROCEDURE,
CREATE TABLE,
CREATE VIEW,
EXECUTE ANY PROCEDURE,
UNLIMITED TABLESPACE on user's tablespace
My new Discoverer 10g Handbook, which I would recommend to anyone working with Discoverer, explains scheduling in detail and even tells you how the tables and views that are used to store the results work. You won't find this information anywhere else, as you will see if you read some of the five reviews that have been left on Amazon.com. For more information about the book please look here:
http://learndiscoverer.com/books/books.htm
The PUBLIC grants are not having any impact. All these do is ensure that ALL users have the same basic privileges. You can just as easily grant these to any role of your choosing and it will work just fine.
By the way, because the PUBLIC role is the MINIMUM privileges that a user can have you might want to consider reducing the end user Discoverer privileges afforded to PUBLIC. By default, all users can Create and Edit workbooks, share workbooks, save workbooks and so on. This is far too rich a set of privileges for the basic user, who in most cases will be a VIEWER user. Whenever I create a new EUL I always recommend that my client reduces the PUBLIC user's privileges and then create new roles for more advanced VIEWER and PLUS users, adding privileges as required.
Thus, my basic VIEWER, aka PUBLIC, has only these privileges:
Collect Query Statistics
Item Drill
Drill Out
My advanced VIEWER has this additional privilege:
Save Workbooks to Database
My basic PLUS user has all of the above, plus these (pardon the pun):
Create/Edit Query
Create Link
and my advanced PLUS users get everything, which means they now get these as well:
Grant Workbook
Schedule Workbooks
I also remove the Save / Save As Actions link from Viewer which prevents the basic VIEWER users from knowing that it is there. In essence, because these users no longer can click the Save link and because they do not have the Save to Database privilege, they will not be prompted to save within Viewer no matter what they do. This now makes 10.1.2 Viewer work the same way as previous versions.
Even though the Save link is not there, my advanced Viewer users will be prompted to save if they have made any changes. This therefore allows you to have two classes of Viewer, one who can save and one that cannot.
I hope this helps
Regards
Micahael Armstrong-Smith

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

HT1382 how can I restore my back up files from my laptop? i want to see the dates and time that I backed up my files. is it posssible?

how can I restore my back up files from my laptop? i want to see the dates and time that I backed up my files. is it posssible?

What backed up files?
Available backups for an iOS device can be found in Edit > Preferences > Devices.

While running the query how much time it will taken, I want to see the time

Hi Folks
I would like to know ... While running the query how much time it will be taken, I want to see the time? in WEBI XI R2.....
Plz let me know the answer.......

Hi Ravi,
The time a report runs is estimated based on the last time it was run. So you need to run the report once before you can see how long it will take. Also it depends on several factors... the database server could cache some queries so running it a second time immediately after the first time could be quicker. And there is the chance of changing filters to bring back different sets of data.
You could also schedule a report and then check the scheduled instance's status properties and view how long a report actually ran.
Good luck

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshoo

I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message Exit Code: 7 Please see specific errors below for troubleshooting. For example, ERROR: DW041 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s)
ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist. ------------------------------------------------------------------------------------- System Requirements and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!

Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

Unable to see the portal content directory in content adminstration

Hi,
I am unable to see the portal content directory in the content administration. I am not the super administrator.I have been assigned content admin role. But, I am unable to see the PCD.I see from previous blogs that permission has to be set for my role.
Can any one help me in telling the procedure to set the permission.If permission is not the issue then do tell me the solution for it.
Suganya

Hi Suganya,
The content admin role normally is sufficient to see / read the portal content catalogue (as far as the standard settings are concerned). But maybe they have been restricted on your implementation by some administrator.
Some with sufficient permissions on the portal content catalogue has to right-click on the root (portal_content) object, "open", "permissions", and has to provide at least administrative "read" permission to you, some role (content admin for example) which is assigned to you or some group you belong to.
Hope it helps
Detlev
PS: Please consider rewarding points for helpful answers on SDN. Thanks in advance!

Unable to see the portal content directory in content administration role

Hi,
I am unable to see the portal content directory in the content administration. I am not the super administrator, i have been assigned other roles. But, I am unable to see the PCD. Please help me how this can be sorted out.
Thanks much in advance,
Sunitha.S

Hi Sunita,
Contact your systen admin people , he/she will assign the Read/Write or Full controls to content_admin_role in the system administration -> Permissions -> select portal content folder and right click the select open Permissions , There he/she has to add content_admin_role in Assigned Permissions category and under Administrator category select Full Control and select End user check box and save the changes.
Then you can see the Portal Content and you can create /change the portal contents.
Thanks and Regards,
Hari

Hello!!!I need to read some data from the serial port and processing these, at the same time I want to see the process that I am doing.

I read the data without problems, and I see them using Waveform graph, the problem is that I want to see the real time stamps, but in the graph appears 2:00:00,000 and 01/01/04, so the date and the time is wrong !!
Can I change this?
I am thinking that the problem is that I have to adquire the data and the time stamps ( using Get date/time) and after, I have to represent both!!!
Thanks!!!

Hello,
As you probably know a waveform is made of a beginning time (t0), a time difference between each value (dt) and an array of values (Y). Your problem is probably that you don't initialize t0. Use the Vi 'Waveform->Build a waveform' to initialize the time of the waveform.
Hope this helps !
Julien

Want to see the previous file name in the selection screen field

Hi,
I am working with flat file upload. Now my problem is in the selection screen field when i press space bar or backspace i want to see the previous file path which i have taken before. How to do this functionality.
Thanks in advance,
Vijay.

Hi,
Hope the following code will help u.
PARAMETER: in_file type ibipparms-path MEMORY ID FID.
at selection-screen on value-request for in_file.
call function 'KD_GET_FILENAME_ON_F4'
    exporting
      mask      = ',CSV,*.csv,'
    changing
      file_name = in_file.
But here when u give a path and execute and come back or executing it again the previous path will automatically come to the in_file field.
Just check this code.
Thanks.

Using 10.6 iweb 3.04 . I make a small change on a page , then choose publish changes , but seems to take hours and seems to want to publish the whole site , not just a small change?

Using 10.6 iweb 3.04 . I make a small change on a page , then choose publish changes , but seems to take hours and seems to want to publish the whole site , not just a small change?

Doing the following wouldn't hurt either:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.

Want to see the stock of different variants with same configurable material

I have the stock for configurable material with different variants. Now I can see the cumulative stock
for that configurable material. But my requirement is that I want to see the stock for every variant
belonging to the configurable material.
How can I get it?

hello anant,
In my opinion for sure standard sap report cannot display the stock for a individual configuration.(Variant)
Reason:characteristics display/hide function is very dynamic dependeding on the dependency and interdependency.
The only option is by a report CL30N plus abap. Since we cannot keep anything in stock for a configurable material. You need to identify all open sales order and stock position OR through material movements and then find the produciton order and then read all char. values.
I assume you are not taking about variant materials.
Reg
Samson.

Want to see the history of the deferror

Hi,
Replication has been set up between three of our servers.
I want to see the history of the deferror when it was occured and what was the transaction associated to it.
Please assist me
Regards
RB

DEFERROR entries that have been resolved would be automatically cleared up by the DBMS_DEFER_SYS.SCHEDULE_PURGE (which is a scheduled job).
If the error hasn't been resolved, it remains in DEFERROR. You can try DBMS_DEFER_SYS.EXECUTE_ERROR to re-execute the transaction in error.

Other workstartion want to see the portal site

Similar Messages

Maybe you are looking for