Others query the absence of the refresh button and that people have suggested dragging the stop, etc button from the right, but I don't have this button nor does it come up when I search under Views/ Toolsbars/Customise. How do I get a refresh button ?
Can't add much to the question
Firefox 4 later use a combined Stop/Reload/Go button that is positioned at the right end of the location bar.<br />
During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button.<br />
If you type in the location bar then that button becomes a Go button.<br />
Middle-click the Reload button to duplicate the current tab to a new tab.
To move the Stop and Reload buttons to their position to the left of the location bar you can use these steps:
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* Drag the Reload and Stop buttons to their previous position to the left of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.
Similar Messages
-
I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.
It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
I have been trying to develop digital pictures from my ipad2 photo library. I don't have iPhoto. When I develop them with snapfish or Walgreens they are fuzzy and blurry (low res/pixels). I know it's not the camera because I have printed these same photos before. They are crystal clear on my iPad. I don't know what to try next .
Contact Snapfish and Walgreens customer/technical support in regards to their digital photo developing service.
-
A search page comes up when I open a new tab. How do I get rid of it?
When I open a new tab, some 'searchqu' site comes up instead of the new tab page. Does anyone know what's wrong with it? Is it something I installed? Is it some freaky add-on that never will like me? OAO
See these threads about searchqu:
*[[/questions/816181]]
*[[/questions/790833]] -
I Have an iPad mini running iOS 7.1.2, I downloaded a new app and it's icon does not appear anywhere ( have ~ 180 apps so not at limit) and it won't open from the purchased apps list. It does not show up when I search for it so can't open t that way either. It doesn't require iOS 8. Can't delete and reinstall, cause not icon. This is not a normal "app won't open" question. it doesn't start the. Stop it just doesn't seem to exist. Any help is appreciated
Hello Chelleuri,
Thank you for using Apple Support Communities.
The following article provides information to trroublehshoot issues with installed apps, including not opening.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Regards,
Jeff D. -
How do i unfreeze my ipod when ive already tried the menu and select button and that didnt help?
how do i unfreeze my ipod when ive already tried the menu and select button and that didnt help?
How long did you press and hold both the Select (Center) and Menu buttons together? Have you tried doing this procedure more than once? Is the hold switch in the Off position?
If nothing else, let the iPod's battery fully drain. Then charge it back up again.
B-rock -
I have uninstalled iPhoto and reinstalled from the app Store, but still don't have the cards, calendar etc option under Share. Any other suggestions please?
With iPhoto 9.5.1 I have those both places - under the file menu and in the Share section
LN -
How can you get your submit buttons to be a single click instead of the default double click? (The
How can you get your submit buttons on the quiz template to be a single click instead of the default double click? (The option to choose double click or not is not showing in properties for this).
Hmmm... Submit button doesn't need a double click at all. Maybe you are talking about the two-step process? When you click on Submit, the feedback appears with the message to click anywhere or press Y. Is that what you are talking about? If you are talking about a real double-click, something must be wrong in your file. And which version are you using?
http://blog.lilybiri.com/question-question-slides-in-captivate
Lilybiri -
My back and forward buttons do not work also the refresh button does not work, I have reloaded the latest version of fire fox and that did not help. All of navigation tool bar worked until I updated Fire Fox, now if I click on a link in yahoo, for instance, I can not get back to my yahoo home page without reloading Fire Fox. HELP please.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file -
iTunes will not show my purchases before October 18, when I had a different username. How do I get the older purchases (more than 5,000) listed when my password is rejected and it won't issue a new one for that username?
Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia -
My iPad screen has gone black. I have tried resetting it with the sleep and home buttons and it only flashes the apple on the screen for a nano second and then it goes black again. I can even hear notifications arriving, but I cannot see anything...I'd rather not reset it to the factory settings as I have a lot of things I worry about using. Either way seems to me that the system itself is working since I can hear it working, but its the screen that isn't. It has not been dropped and has been in a case for years! Please help!
When the power is on and I press the home button, I can slide my finger where the slider bar "would be" and it makes the noise as if its "opening" flashes a blue screen then returns black...
-
my phone froze so i switched it off using the power button and home. now everytime it switches on, it wont go past the apple screen??
Hello 3m4nz4,
After reviewing your post, I have located an article that can help with your device. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iOS: Not responding or does not turn on - Apple Support
Your iPhone, iPad, or iPod touch may occasionally stop responding to buttons, switches, or touchscreen input and may exhibit one or more of these symptoms:
Does not return to the Home screen after you press the Home button
Does not wake from sleep after you press the Sleep/Wake button
Does not turn on (or power on) when you press any button
Does not start up past Apple logo
Appears frozen or unresponsive
Is unable to "Slide to Unlock" or "Slide to Power Off"
To troubleshoot these symptoms:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Some of my songs are listed twice on my iPod itself. However, when I plug the iPod into my computer, the songs don't show up twice in iTunes when I click on device/music. How do I get rid of the duplicate songs on my iPod?
that is odd! that should not be happening.
Are you syncing your songs right off of itunes itself? because it should be syncing over to the ipod however it is listed in itunes. -
So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379 -
I have the ICloud icon on my PC - Windows 7 - and the program. When I try to sign in using my Apple ID, the message says that the ID is valid but I don't have an account. How do I get an an Icloud account?
You can't create an iCloud account on your PC. You have to first create an iCloud account on an iOS device (iPhone, iPad, iPod Touch) or Mac (running OS X Lion or higher). After creating the account on one of these devices you can use the ID to sign into the account on your PC.
Maybe you are looking for
-
Reteiving Accounting Document number by passing the reference key
Hi All, I have the reference key (bkpf-awkey), fiscal year(gjahr) and bukrs and I need to retreive the Accounting doc number(Belnr). Right now, I am writing a select statement to retreive belnr from bkpf and passing bukrs, gjahr and awkey in the whe
-
Acrobat X Faulting Module Scan.api
Have customer where one user who has Acrobat Standard X gets error to close Adobe every time she tries to scan within Acrobat. She gets the error: Faulting application adobe.exe, version 10.1.1.33 faulting module scan.api, version 10.1.1.33. in Even
-
How to define an new New transaction type in SRM Environment?
Hi All, There is a situation where in I have to add anew transaction type and link it to the existing process. If I am going to SPRO->SRM->SRM Server -> Cross appl.Basic Setting -> Define transaction type It gives me an un editable screen. My questio
-
Error when inserting into a table
Hi, I am running this insert stmt SQL> insert into cntct select * from CUSTSRV_ADMN.cntct_bk1; ERROR at line 1: ORA-01733: virtual column not allowed here Below is the table structure. SQL> desc cntct; Name Null? Type CNTCT_KEY NOT NULL NUMBER(10) CN
-
Flash Video (.flv) in Dreamweaver
I can't find anything here or on teh net that tells me how to use a preloader with Flash Video inserted directly into DW. The standard answer is to create a .swf file in flash and use the preloader there. Duh! No kidding? Can anyone tell what the poi