OTL Time Cards to PA Integration. - All Time cards are imported into One OU

Hi,
At our site, we have implemented OTL to support PA. (No Payroll/HRMS).
We have created multiple selfservice Time Resp for each Operating Units. The MO Operating Unit for the responsibility is set to corresponding OU for each responsibility.
The issue is that,
When the Time cards are approved and the PRC: Transaction Import is ran for each operating unit (again difft responsibility for each OU), it is not importing the time cards into the respective OU in PA. Rather When we run the PRC: Transaction Import in US operating unit, all the Timecards are imported in the US OU.
We found, For all the OTL time cards, the ATTRIBUTE1 for the "SECURITY" Attribute category is 84 (which is US OU) in hxc_time_attributes table.
which configruation controls this ? Why the MO: Operating Unit is not used to populate the value or is there any other profile which needs to be set to get the right OU?
Any help on this is greatly appreciated.
Thanks
Chidambaram

Please check and confirm whether you have the profile 'HR:Business Group' set to corresponding BGs for the respective time entry responsibilities.
--Shiv

Similar Messages

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to cr

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that. To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it. I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
When I am trying to upload a photo to the web, I get the Finder folder showing with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth. This is a folder name that I cannot find in my HD anywhere when I look for it. If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly). How do I get my folder of edited photos to show when I want to upload a picture to the web?
Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on?

See my response to your other post.

Hey. I have received an iTunes gift card, so I was all excited, punching the code into the "redeem" option on iTunes on my iPad2; however, I kept on getting the alert, "This is not recognised as a valid code". It is very legible, though. How come?

Hey. I have received an iTunes gift card, so I was all excited, punching the code into the "redeem" option on iTunes on my iPad2; however, I kept on getting the alert, "This is not recognised as a valid code". It is very legible, though. How come?

The obvious answer I think is that maybe you are not entering the letters and numbers correctly. I almost never get it right the first time when I use a gift card.
Try entering the code again - slowly and methodically. If it still doesn't work - look here for help.
http://support.apple.com/kb/TS1292
One final thought - if you are using a gift card that was purchased in another country - say like you have a Canada gift card and you live in the U.S. - that card will not work in the U.S. iTunes store.

I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them.

I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them on the computer?

Hi Craig
Unfortunately, in your case, there isn't really a way to separate them as far as I can think.
You could try restoring from a backup, and choosing an older backup perhaps
Cheers

All my photos are importing out of order. For example, if I have images 1,2,3, and 4.., the order they show up in is 2,1,4,3. What could cause this and any ideas how I fix it?

All my photos are importing out of order. For example, if I have images 1,2,3, and 4.., the order they show up in is 2,1,4,3. What could cause this and any ideas how I fix it?

One thing, don;t think of them as being imported in any one particular order.
The order of the images is completely fluid, you can change it anytime you want to suit your needs at that particular moment.
As Léonie showed you select the order you want to see the images in by selecting the item you want to sort on in the pull-down.
The only time fluid sort order can be a problem is when you export groups of images. If you put the images into a particular order in Aperture when you export them and view them in the Finder the order they are in may very well be different. In this case you could give names to the images that include a sequence number or index.
Then when they are viewd in the Finder they will be in them same order they were in in Aperture.
regards

HT1449 how do you move all music from two computers into one itunes account?

How do you move all music from two computers into one itunes account?

An "iTunes account" is an online account you use for buying music, like a bank account. An iTunes collection is the media you see when you open iTunes. Which do you mean?
If it is two computers, it would also help to know where these are located. Are they on the same local network? If they are, try Home Sharing (and you have control of both and you aren't just trying to get music fro your computer to your friend's computer in another state). If they are not, you'll have to use an external hard drive or flash drive.
Is this on a PC? Your computer information says Windows but you posted this in the iTunes for Mac forum.

Why has iTunes seperated a album which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

Why has iTunes seperated a album into indevidual songs, which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

Steve MacGuire a.k.a. turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message/9910895)
Quick answer: Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields. If they are not a multiple CD set you still need to make sure the disc number fields are set correctly or all empty.

Importing a 3CD opera so that all the tracks are sequential in one playlist

I have a 3CD opera. Each Cd starts it's track numbering with 1, 2, 3, etc. When I import the cds I either have 3 separate playlists - one for each disk - or if I put them together I have tracks 1, 1, 1, 2, 2, 2, 3, 3, 3 - etc. I gather I can renumber each track but that seems a bit tedious. Is there a way to import into one play list that automatically makes the tracks in the correct sequential order?

Select all the songs from each CD and open the "Multiple Get Info" window (command + I). In the Info tab, enter the disc number below the track numbers, like this:

I cannot print ANYTHING frmo the internet/email at all; only from Word. Comcast & Kodak say it's a FireFox problem. All the letters are little square ones with 1 to 2 spaces in between each word.

I cannot print ANYTHING from email or internet at all; only from Word. Comcast and Kodak says it's a FireFox problem. I have work to print and cannot. All the letters are little square ones with 1 to 2 spaces in between each word.

Caused by a Bug in Firefox 4.0b12. It was fixed on Monday in the 4.0b13 pre "tester" nightly's. The fix will be in the 4.0 Release Candidate.

HT1338 all of sudden comcast and facebook pages do not load when i try to access them on my mac. all other websites are fine. any one out there having the same issue?

all of sudden comcast and facebook pages do not load when i try to access them on my mac. all other websites are fine. any one out there having the same issue?

That's just not right - I mean, it really wrong to have to use a Windows machine to access your Facebook account. Can you pull up Comcast on IE as well?
Something's going on and I'm surprised that deleting your cache and cookies for those sites didn't work.
Let me fool around a bit - what's your primary browser?
Curious,
Clinton

How can I merge all of the new FF windows that are open into one window with multiple tabs? Safari has a merge windows feature that I like. This is really nice when conducting reasearch on multiple sites at the same time.

When I clik on weblinks they all open into new windows making it somewhat painful to clik on window in the menu bar to go to each new page. I would rather have a feature that would allow me to merge all of those individual windows into tabs within one page.
== This happened ==
Every time Firefox opened

Thank you. That worked. I was able to open 1 window with multiple tabs. Thanks cor-el!

Every time i close Dreamweaver CC, all my sites are gone

Dreamweaver Version 13.1 Build 6443
everytime i open Dream Weaver, i have to reimport all my sites.
I have tried syncing to the cloud, it appears to do so, there are xml files in my cloud folder in my appdata folder, but nothing seems to work
Any help would be appreciated
Thanks
Don

Hi Donnotil
I guess that you will have to sync all your sites once to the cloud and then things should start to work as normal
Here is what I suspect is the case
You have all your sites in DW
In the cloud there are no sites
You work with DW and relaunch DW
Things get synced from the cloud and all your sites are all gone
So try out the below steps
Have all your sites set up in DW
Sync them all to the cloud
Try relaunchinG DW
Also Check if you have enabled Automatic Sync in Edit >Preferences>Sunc Settings

Outlook integration: All day activities are not displayed correclty

All day activities in MSA do not replicate correctly in outlook. If I create an all day activity in outlook, the activity is syncronized so I will find the appointment in outlook, but it will not be marked as all day appointment, and the time will not be from 12 am to 12 am of that day. Instead, I found that the system keeps the duration of the activity to 12 hours, but not starting and finishing in the same day.
However, when those all day appointments are created in outlook, they are refleted as all day activities in MSA so it works fine.
Thanks for your help,
ALVARO

Hi Alvaro,
Can you please tell me which version of MSA you have?
Thanks & Regards,
Rashmi

How do I put all my seperate video files into one DVD?

Hey friends,
Toby here again, thanks so much for giving me hint to the scroll bar, I've finished putting the audio into the video as well as the effects.
Which means my movie's almost complete!
However, while I await the music from my composers to be completed to put in the film for story-telling depth, I need help again.
I have edited my movie into four seperate windows with this program, and I'm currently trying to figure out how I can put all of it together or all of it into one DVD because I need to watch and make sure the footage's video matches with the audio so it doesn't seem like a Godzilla dubbing or something.
Give me as much suggestions as you could possibly give me, and thank you kindly for your time!
-Toby

Since you said DVD, I assume you're working in standard rather than hi-def video.
As I show you in my books:
1) Share/Computer/AVI with the DV preset to output each of your segments as a DV-AVI.
2) Open a new project using the standard DV project settings.
3) Import all of the segments and combine them on the timeline.
Just as a note, a DVD can hold about 70 minutes of video at full quality. If you're video is longer than that, it's probably a good idea to spread it out over two or more discs.

Not all RAW images are imported

I have CS5 and use a Lumix FZ150. The native format of the RAW images on the camera is RW2. When I try to open these in CS5, some are opened some do not. The pics that open, open in Camera RAW. The others give me an error message, that my camera is not supported?
Any ideas as to what the problem is.

The FZ150 RW2 files should open in ACR 6.5 thru ACR 6.7 for CS5. If you are not use ACR 6.7 you might try that, first, in case there was some issue that was corrected in later versions.
If you are already using that version, then the files may be corrupt. It could be a bad memory card, bad card reader/cable or even a bad hard-drive on the computer. You might try transferring the bad files, again, from the memory card, perhaps using a different method (camera-connected-cable vs card-reader) and see if they work a second time. If not, then the memory card may be bad. If the files transfer ok a second time, then something besides the memory card is bad.
If nothing you do works, then perhaps the camera is writing the files in a different mode that Adobe doesn’t support. I am not familiar with your camera to know what that might be, but some cameras write smaller raw formats or HDR raw formats and maybe Adobe doesn’t decode everything.
If you can’t figure it out, then you can try posting a bad file, here, so others can take a look. The way to do that would be to upload the raw file (or preferably a ZIP of the raw file) to a large-file hosting service like www.dropbox.com or www.skydrive.com or www.wetransfer.com or www.yousendit.com and then post the public download link in a reply, here.

OTL Time Cards to PA Integration. - All Time cards are imported into One OU

Similar Messages

Maybe you are looking for