Ou are working with multiple open files and wish to separate them into movable windows. Which of the following will accomplish this?

Which of the following will exactly copy a file in Photoshop CS5?

Similar Messages

Which of the following will exactly copy a file in Photoshop CS5?

Which of the following will exactly copy a file in Photoshop CS5?

Just answer A to all the questions on your exam. You'll probably get an A. Honest.
Seriously, put your smart phone down and engage your brain. I'll bet you really can get an A if you concentrate.
-Noel

Is there a way to undo after Photoshop has frozen and you are working with a recovered file?

so this is exactly what happened...
I had been working on an edit for way too long and of course i didnt save it the entire time because im terrible i guess, I wanted to see what the deal with Lens Flare was so i went Filter>Render>Lens Flare to check it out. I hated it and immediately removed the flare with no problems. Then I was going to go back to Lens Flare to see if i could adjust it into something sort of decent but i accidentally went Filter>Render>Lighting Effects and it locked my Photoshop up (yes my computer sucks). I then started to panic because of the extensive amount of time i put into this edit without saving it. I opened Photoshop and thankfully it loaded up the recovered file i was working on. Unfortunately it has the terrible lens flare from my first attempt attached to it and im not able to undo or anything. Is there anything i can do to get rid of the lens flare? any help is welcomed. thank you so much for your time

Have you applied the Lens Flare destructively on the single Layer in the file?

Working with uncompressed XFL files and source control | Learn Flash Professional CS5 & CS5.5 | Adobe TV

Use the Flash uncompressed XFL file format with a source control system to enable designers and developers to collaborate on Flash projects. Contributors can edit different assets simultaneously and see updated assets as soon as they are checked in.
http://adobe.ly/x0GHI4

This is a great overview of sequential use of source control with the xlf format. However, typically in a team setting, team members are working at the same time. Our team has found that many of the xlf files have one or more timestamp related entries that get updated even when no functional changes have occurred. This is particularly true of DOMDocument file, which timestamps changes, marks library elements as expanded or not, and tracks a published history. All of these changes conflict with anyone who is simultaneously working on the xlf. Any tips on how to deal with these issues?

I work with multiple Mac computers and need catalog help

NEW TO Lightroom
Can I create a folder on my desktop that containg the original files and a "new catalog" for each "shoot"
I'm hoping to create a workflow where the folder would contain everthing needed to access and edit/develop images at any time. After I finished a shoot the folder would contain a the original images, the catalog with previews and develop setting and any exports. I would then move that folder to an external hard drive and note on an Excel (Numbers) spread sheet where it is.
Now in the future I could find the drive, connect it any computer and begin working on an image since everything is there.
If the answer is yes is it as simple as "creating" a new catalog via file/new catalog in the folder I just created for the client?
Tks fot the answers.

Can I create a folder on my desktop that containg the original files and a "new catalog" for each "shoot"
Yes, even if you don't put the double-quotes on those words
Now in the future I could find the drive, connect it any computer and begin working on an image since everything is there.
Assuming that the computer has Lightroom installed, then this would work. You might need to reconnect the photos inside of Lightroom.
If the answer is yes is it as simple as "creating" a new catalog via file/new catalog in the folder I just created for the client?
Yes

Working with multiple .as files question

Hi.
I am trying to find out how to make one .as file code interact with another .as file's code.
like, if I had one .as file that specified options of movies and then when the user clicks on a movie (loaded through xml) it uses code from another .as file to load the correct movie.
can someone point me to a tutorial or tell me what to study up on pls?
thanks fro any help!

Okay, sorry about that. I put together an example of what I am trying to do. I hope this better explains it.
package {
     public class ImageGalleryOne extends Sprite {
          public function ImageGalleryOne() {
               contentToStage();
          public function contentToStage():void {
               btnNext = new BtnNext();
               addChild(btnNext);
               btnNext.x = 1054;
               btnNext.y = 929;
               btnBack = new BtnBack();
               addChild(btnBack);
               btnBack.x = 226;
               btnBack.y = 929
               imageLoaderHost = new Sprite();
               addChild(imageLoaderHost);
               imageLoaderHost.x = 250;
               imageLoaderHost.y = 640;
package {
     public class MainMenu extends Sprite {
          public function MainMenu() {
               contentToStage();
          public function contentToStage():void {
               mainSprite = new Sprite();
               addChild(mainSprite);
               backgroundGfc = new Background();
               mainSprite.addChild(backgroundGfc);
               backgroundGfc.x = 0;
               backgroundGfc.y = 0;
               backgroundTop = new BackgroundTop();
               mainSprite.addChild(backgroundTop);
               backgroundTop.x = 0;
               backgroundTop.y = 165;
               backgroundBottom = new BackgroundBottom();
               mainSprite.addChild(backgroundBottom);
               backgroundBottom.x = 0;
               backgroundBottom.y = 847;
               buttonOne = new ButtonOne();
               addChild(buttonOne);
               buttonOne.x = 50;
               buttonOne.y = 350;
               buttonOne.addEventListener(MouseEvent.CLICK, galleryOne);
               buttonTwo = new ButtonTwo();
               addChild(buttonTwo);
               buttonTwo.x = 300;
               buttonTwo.y = 350;
               buttonTwo.addEventListener(MouseEvent.CLICK, galleryTwo);
               buttonThree = new ButtonThree();
               addChild(buttonThree);
               buttonThree.x = 550;
               buttonThree.y = 350;
               buttonThree.addEventListener(MouseEvent.CLICK, galleryThree);
          public function galleryOne():void {
               imageGalleryAS = new ImageGalleryOne;
               mainSprite.addChild(imageGalleryAS);
               mainSprite.setChildIndex(backgroundTop, mainSprite.numChildren -1);
               mainSprite.setChildIndex(backgroundBottom, mainSprite.numChildren -2);
               //I am trying to get btnBack and btnNext (from imageGalleryAS) above backgroundBottom in the display hierchy

Working with Multi-column text in Illustrator CS6 - highly irritating! How do I do the following ...

Hi ...
I'm finding working with multi column\row text box ("table") in Illustrator CS6 really irritating and non-intuitive. Maybe just my ignorance but I can't find simple ways to do the following:
1. Click in a different cell of the "table" to the one currently active. Cursor does not move to new cell. How do I move focus to a different cell?
2. Begin entering text in an empty table - I can't get the cursor to appear, despite clicking inside cell area, on text box border etc.
Is there any simple way to perform these basic, simple tasks?
Thanks
Richard

In my quick test I was able to enter the text by beginning at the upper left of the box and clicking. When I entered the text it appeared in the first box. Then I was able to tab through to the other boxes.

Firefox will not connect or open. Mac OS 10.6.8. I was working with many open tabs when Firefox stopped working. Now it won't connect. I have uninstalled and downloaded it several times.

I was working with many open tabs and firefox crashed. Now it won't connect to the internet at all.

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Software available for working with large video files?

Hello,
I'm working in PP CS6. I was wondering if there are any workarounds or 3rd party plugins/software that
make working with really large video files easier and faster?
Thanks.
Mark

Hi Jeff,
Thanks for helping. This is the first time I shot video with my Nikon D5200. It was only a 3 minute test clip
set at the highest resolution, 1920x1080-60i. I saw the red line above the clip in PP CS6 and hit the enter
key to render the clip.
It took almost 18 minutes or so to render the clip. This is probably normal but I was wondering if there is
a way to reduce the file size so it doesn't take quite as long to render. I just remember a few years back
that when the Red camera was out, guys were working with really huge files and there was a program
from Cine something that they used to reduce the file size and make it more manageable when editing.
I could be mistaken. I've been out of the editing look for a few years and just getting back into it.
Thanks.
Mark
Here's my PC's components list you asked for:
VisionDAW 4U 8-Core Xeon Workstation
2 Intel QUAD-Core Xeon 5365-3.0GHz, 8MB, 1333MHz Processors
16GB 667MHz Fully Buffered Server Memory Modules (2x2GB)
Microsoft® Windows® Windows 7 Ultimate (x64)
WDC 250GB, Ultra ATA100, 7200 rpm, 8MG Buffer Main OS HD
2 WWDC 750GB, SATA II, 7200 RPM, 16MB Buffer HD (Raid 0)
2 WDC 750GB, SATA II, 7200 rpm, 16MG Buffer HD (Samples)
2 WDC 1TB Enterprise Class, SATA II, 7200 RPM, 32MB Buffer Hard Drive
MOTU 24 I/O (main) / MOTU 2408mk3 (slave)
Plexor PX-800A 18X Dbl. Layer DVD+/-RW Optical Drive
Buffalo BuRay Drive (External) BR-816SU2
Front Panel USB Acess
Integrated FireWire (1394a) interface
Thermaltake Toughpower 850W Power Supply
3xUAD1 Universal Audio Cards
NVIDIA QUADRO FX 1800 / Memory 768 MB GDDR3
CUDA Parallel Processor Cores / 64
Maximum Display Resolution Digital @60Hz = 2560x1600
Memory Interface 192Bit
Memory Bandwidth (GB/sec) / 38.4 GB/sec
PCI-Express, DUAL-Link DVI 1
Digital Outputs 3 (2 out of 3 active at a time)
Dual 25.5" Samsung 2693HM LCD HD Monitors

Speed up Illustrator CC when working with large vector files

Raster (mainly) files up to 350 Mb. run fast in Illustrator CC, while vector files of 10 Mb. are a pain in the *blieb* (eg. zooming & panning). When reading the file it seems to freeze around 95 % for a few minutes. Memory usage goes up to 6 Gb. Processor usage 30 - 50 %.
Are there ways to speed things up while working with large vector files in Illustrator CC?
System:
64 bit Windows 7 enterprise
Memory: 16 Gb
Processor: Intel Xeon 3,7 GHz (8 threads)
Graphics: nVidia Geforce K4000

Files with large amounts vector points will put a strain on the fastest of computers. But any type of speed increase we can get you can save you lots of time.
Delete any unwanted stray points using Select >> Object >> stray points
Optimize performance | Windows
Did you draw this yourself, is the file as clean as can be? Are there any repeated paths underneath your art which do not need to be there from live tracing or stock art sites?
Check the control panel >> programs and features and sort by installed recently and uninstall anything suspicious.
Sorry there will be no short or single answer to this, as per the previous poster using layers effectively, and working in outline mode when possible might the best you can do.

Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4. When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4. When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

Clarification: this is a user forum; you are not addressing Adobe here.
The answer to your question as phrased is: never.
CS5 is history and it is not longer supported. There will not be any updates or bug fixes for CS5.
You need to convert the raw NEF files from your D810 to raw DNGs using the free, standalone Adobe DNG Converter 8.6 RC (beta), the first version ever to support that camera..

Can I use InDesign cs6 to open and work with PM6.5 files?

Can I use InDesign cs6 to open and work with PM6.5 files?

Lrak wrote: "It sounds like I should to that before endeavoring to transfer the manuscript?" (re-link)
It should be much easier to re-link in the Pagemaker file, as, with any luck, you can get the filenames from the Graphics Manager. After conversion to InDesign, any out-of-date linked images get their names converted to something like "image 123.jpg", and are themselves converted to an embedded low res representation of the image. Even vectored art. Pretty hard to figure them out, unless you are VERY familiar with the file, which you may be.
It may be that any cropping gets lost, too? I do prepress work, we do some set up for our customers, but most comes in pretty much ready to go, so I don't often have to did too deep into fixing such issues. On the other hand, any problem that can happen has probably crossed my desk, or it seems that way some days!

I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gon

I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gone. I had a small icon on the upper right side of my toolbar. I used it all the time to keep separate windows for news, financial items, travel plans, etc. Has this been removed from Firefox?

Hi,
The [https://support.mozilla.org/en-US/kb/tab-groups-organize-tabs Tab Groups] feature is still present. You can try to right-click the + after the last tab and [https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars Customize]. If the icon is hidden behind another, or if it's available inside the Customize mini window, you can place it back. If the problem persists, you can also try to '''Reset toolbars and controls:''' and '''Make Changes and Restart''' [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode] start screen.

Working with bootstrap css file after opening the browser

working with bootstrap css file after opening the browser when i came back on working on bootstrap my computer started hanging and opning new tabs and showing message " A caused the program to stop working correctly.Windows will close thoe program and notify you if solution is available"

Hi Geetha,
1.) button problem:
i don't know how you open the form - when you do it with a XML file maybe you packed the wrong XML file into your addon installer.
2.) the flickering can be a problem of formatted searches or interacting with other addons.
when addon a. changes a field it can be that addon b. does something because of the event from addon a.
the same can happen when you have formatted searches that do something when a field changes.
ok - that are my last tipps for this day
good night
David

Working with Multiple Files in Workspace Layout

If I was working with multiple files in the workspace layout, they each used to be available for selection from a tab. Now I can either cascade the files horizontally or vertically - but not have them appear in a tab across the top of the workspace layout.
Does anyone know how to set the workspace to present multiple files in tabs? I have CS3.

Tanya,
This may not help, but the times when that happens to me is when I go too fast and some operations haven't finished. I then try to select a file that hasn't completed and the file I select is in the process of having the data updated. The worst is when it is trying to render as I am doing something.
I hope this helps some.
Mel

Ou are working with multiple open files and wish to separate them into movable windows. Which of the following will accomplish this?

Similar Messages

Maybe you are looking for