OU with groups as resource
I have an Active Directory within this AD there is an OU which holds groups.
Active Directory
|
|---Groups OU
|---GroupA
|---GroupB
|---GroupC
|---GroupD
|---GroupE This AD is linked to all the user in IdM. I can easily use the members attribute and add group membership to the user's profile. But I am trying to figure out if it is possible to define another resource which basically connects to this same AD but the basecontext would be the OU that holds these groups (let us call this GroupAD).
Then during provisioning I would add the user's dn to appropriate groups. Is it possible to add update the member attribute for a group using xpress.
So - User cn=abc,ou=company,ou=com requests access to GroupA and GroupE
IdM would cn=abc,ou=company,ou=com to GroupA and GroupE.
I have an Active Directory within this AD there is an OU which holds groups.
Active Directory
|
|---Groups OU
|---GroupA
|---GroupB
|---GroupC
|---GroupD
|---GroupE This AD is linked to all the user in IdM. I can easily use the members attribute and add group membership to the user's profile. But I am trying to figure out if it is possible to define another resource which basically connects to this same AD but the basecontext would be the OU that holds these groups (let us call this GroupAD).
Then during provisioning I would add the user's dn to appropriate groups. Is it possible to add update the member attribute for a group using xpress.
So - User cn=abc,ou=company,ou=com requests access to GroupA and GroupE
IdM would cn=abc,ou=company,ou=com to GroupA and GroupE.
Similar Messages
-
How to create Matrix with Group report layout in xml
Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
Period-1 Period-2 Period-3 Period-4
COMPONENT
LABOUR - DIRECT
Actual 1 2 3 4
Actual Rate 10 10 10 10
Standard Rate
Var%
DEPRICIATION-DIRECT
Actual
Actual Rate
Standard Rate
Var%
OVERHEAD - DIRECT
Actual
Actual Rate
Standard Rate
Var%
LABOUR - IN DIRECT
Actual
Actual Rate
Standard Rate
Var%
Thanks in advanceYour friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
> -
UCCX 7.0.1SR5 Redirect call 2 new CSQ if group of resources isn't available
I have a group of resources that will be assigned all multilingual CSQs. If a multilingual call comes in, I want the script to check if there is a multilingual (ML) resource logged in before putting the call in the multilingual CSQ. Once the call is in queue, I would like the script to continuously check to make sure that a ML rep is logged in. If a ML rep is not logged into CAD when the call comes in or logs out while the ML call is in queue, I would like to redirect the ML caller to an English CSQ as a catch all.
The problem is that I don’t know how to distinguish between a ML rep and an English rep within the script. I was thinking I could put them into separate teams but the script doesn’t appear to have the ability to see different teams.
Thoughts?You should be able to use the Get Reporting Statistics step to check the quantity of Logged In Resources in the multilingual CSQ. You can use this same step within the Queued branch of the multilingual CSQ Select Resource step to ensure there are still people logged in.
Follow that with an If step based on the quantity of resources logged in and act accordingly. Don't forget to use the Dequeue step before leaving the Queued branch of a Select Resource step though. -
I have a report which have year(2008), Category(0-1,2-3, ALL), product(0,1,2,3,4..), % sales. I group by all the category elements and called it as All, I am not getting the right percentage sales for the Category ALL other wise for 0-1,2-3 i am getting it right. Please advise where i am doing it wrong. please find the blog for a screen shot of my issue.
http://ravibiblog.blogspot.com/2012/04/report-with-grouping-issue.html
Thanks,
RCPl post details of OS, database and EBS versions. Pl see if these MOS Docs can help
FARXPBSH Failing With "Program was terminated by signal 11" or "Program was terminated by signal 10" (Doc ID 742729.1)
Publishing RXAPPYAC: The FARXPBSH Ends With 'Signal 11' Error (Doc ID 432797.1)
RXi RX Reports Failing With Program Was Terminated By Signal 10 or 11 Errors After FA Rollup Patch 6 (Doc ID 737963.1)
Program was Terminated by Signal 11 when Running Rxi Reports (Doc ID 559425.1)
HTH
Srini -
Custom IKM Knowledge Modules are not working with Group By Clause
Hi All,
I am facing an issue with custom IKM knowledge modules. Those are IKM Sql Incremental Update and IKM Sql Control Append.
My Scenario is
1. Created an interface with table on source and temporary datastore with some columns in target.
2. In the Interface on the target i defined one column as UD1 and other column as UD2 for which group by to be implemented .
3. Customized IKM Sql Incremental Update with " Group by " by making modification in my IKM Sql Incremental Update
detail step "Insert flow into I$ table" i.e., i replaced like this whereever i find this <%=odiRef.getGrpBy()%> API
Group By
<%=snpRef.getColList("","[EXPRESSION]","","","UD1")%>,
<%=snpRef.getColList("","[EXPRESSION]","","","UD2")%>
Up to UD5.
. Here in the place of [EXPRESSION] i passed column names for UD1 similarly other column name for [EXPRESSION] of UD2.
4.Made all the proper mappings and also selected the KM's needed for that interface like CKM Sql ,IKM Sql Incremental Update.
5. Executed the Interface with global context.
Error i am getting in this case is :
Caused By: java.sql.SQLSyntaxErrorException: ORA-00979: not a GROUP BY expression
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1115)
Here the columns in the select clause are there in Group By also.
I did the same scenario using IKM Sql to file append .In that case i am able to do it. But not with the above mentioned KM's. Please let me know if any one know it or tried with this, as it is
high priority for me.
Please help me out.
Thanks,
keerthiHi Keerthi,
If your are transfering data from Oracle to Oracle (I means source is oracle Db and target is also oracle DB) then use below KM's and group by will come automatically based on the key values you selected on interface target datastore
1) CKM Oracle
2) LKM Oracle to Oracle (DBLINK)
3) IKM Oracle Incremental Update (MERGE)
Hope this will helps to resolve your issue
Regards,
Phanikanth -
Error in communicating with Group Administration Server
Hello everyone, i am requesting your help for an issue with LMS 4.2.5
When i browse to Admin-> Group Management -> Fault.
I get the following:
OGS Server Error
Error
Error in communicating with Group Administration Server.
It may be down or not yet up. Please make sure that the Group Administration Server is up and running, then refresh the page.
here is the pdshow output
pdshow
Process= ESS
State = Program started - No mgt msgs received
Pid = 5536
RC = 0
Signo = 0
Start = 10/31/14 14:13:21
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EssMonitor
State = Running normally
Pid = 5567
RC = 0
Signo = 0
Start = 10/31/14 14:13:25
Stop = Not applicable
Core = Not applicable
Info = ESS is fully up now !
Process= EventFramework
State = Program started - No mgt msgs received
Pid = 5584
RC = 0
Signo = 0
Start = 10/31/14 14:13:26
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= SyslogCollector
State = Running normally
Pid = 5585
RC = 0
Signo = 0
Start = 10/31/14 14:13:26
Stop = Not applicable
Core = Not applicable
Info = SyslogCollector Started at Fri Oct 31 14:13:28 CST 2014
Process= RMEDbEngine
State = Program started - No mgt msgs received
Pid = 5586
RC = 0
Signo = 0
Start = 10/31/14 14:13:26
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= FHDbEngine
State = Program started - No mgt msgs received
Pid = 5663
RC = 0
Signo = 0
Start = 10/31/14 14:13:30
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EPMDbEngine
State = Program started - No mgt msgs received
Pid = 5696
RC = 0
Signo = 0
Start = 10/31/14 14:13:34
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EPMServer
State = Running normally
Pid = 5729
RC = 0
Signo = 0
Start = 10/31/14 14:13:38
Stop = Not applicable
Core = Not applicable
Info = EPMServer is up and running
Process= AdapterServer
State = Program started - No mgt msgs received
Pid = 5748
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= AdapterServer1
State = Program started - No mgt msgs received
Pid = 5749
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= FHServer
State = Running normally
Pid = 5750
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = FHServer started.
Process= INVDbEngine
State = Program started - No mgt msgs received
Pid = 5751
RC = 0
Signo = 0
Start = 10/31/14 14:13:42
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= PMServer
State = Running normally
Pid = 5936
RC = 0
Signo = 0
Start = 10/31/14 14:13:46
Stop = Not applicable
Core = Not applicable
Info = PMServer is up and running
Process= IpmDbEngine
State = Program started - No mgt msgs received
Pid = 5960
RC = 0
Signo = 0
Start = 10/31/14 14:13:50
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= UPMDbEngine
State = Program started - No mgt msgs received
Pid = 5993
RC = 0
Signo = 0
Start = 10/31/14 14:13:54
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= UPMDbMonitor
State = Running normally
Pid = 6026
RC = 0
Signo = 0
Start = 10/31/14 14:13:58
Stop = Not applicable
Core = Not applicable
Info = DbMonitor Running Normally.
Process= ANIDbEngine
State = Program started - No mgt msgs received
Pid = 6027
RC = 0
Signo = 0
Start = 10/31/14 14:13:59
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= MACUHIC
State = Running normally
Pid = 6055
RC = 0
Signo = 0
Start = 10/31/14 14:14:03
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= UTLITE
State = Running normally
Pid = 6056
RC = 0
Signo = 0
Start = 10/31/14 14:14:03
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= FDRewinder
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= CmfDbEngine
State = Program started - No mgt msgs received
Pid = 6057
RC = 0
Signo = 0
Start = 10/31/14 14:14:03
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= CmfDbMonitor
State = Running normally
Pid = 6183
RC = 0
Signo = 0
Start = 10/31/14 14:14:08
Stop = Not applicable
Core = Not applicable
Info = DbMonitor Running Normally.
Process= DfmBroker
State = Running normally
Pid = 6190
RC = 0
Signo = 0
Start = 10/31/14 14:14:09
Stop = Not applicable
Core = Not applicable
Info = DfmBroker is running normally
Process= DfmServer
State = Running normally
Pid = 6322
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = DfmServer initialized OK.
Process= DfmServer1
State = Running normally
Pid = 6323
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = DfmServer1 initialized OK.
Process= DFMLogServer
State = Program started - No mgt msgs received
Pid = 6324
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= DFMCTMStartup
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 11:55:05
Stop = 11/03/14 11:55:05
Core = Not applicable
Info = Application started by administrator request.
Process= FHPurgeTask
State = Transient terminated
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 00:00:00
Stop = 11/03/14 00:00:44
Core = Not applicable
Info = DPS Task FHPurgeTask completed at Mon Nov 03 00:00:44 CST 2014. For status check Job Browser UI.
Process= DFMMultiProcLogger
State = Program started - No mgt msgs received
Pid = 6327
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= CSDiscovery
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= DCRDevicePoll
State = Transient terminated
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 09:15:02
Stop = 11/03/14 09:15:50
Core = Not applicable
Info = Application started by administrator request.
Process= CSRegistryServer
State = Running normally
Pid = 6328
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = CSRegistryServer is running
Process= Tomcat
State = Program started - No mgt msgs received
Pid = 6330
RC = 0
Signo = 0
Start = 10/31/14 14:14:13
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= TomcatMonitor
State = Running normally
Pid = 6670
RC = 0
Signo = 0
Start = 10/31/14 14:14:17
Stop = Not applicable
Core = Not applicable
Info = Tomcat Server up
Process= Apache
State = Running normally
Pid = 7183
RC = 0
Signo = 0
Start = 10/31/14 14:16:02
Stop = Not applicable
Core = Not applicable
Info = Web Server initialized ok.
Process= DCRServer
State = Running normally
Pid = 7204
RC = 0
Signo = 0
Start = 10/31/14 14:16:06
Stop = Not applicable
Core = Not applicable
Info = DCRServer is up and running
Process= CMFOGSServer
State = Program started - No mgt msgs received
Pid = 7257
RC = 0
Signo = 0
Start = 10/31/14 14:16:12
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= TISServer
State = Program started - No mgt msgs received
Pid = 7258
RC = 0
Signo = 0
Start = 10/31/14 14:16:12
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= DFMOGSServer
State = Program started - No mgt msgs received
Pid = 7323
RC = 0
Signo = 0
Start = 10/31/14 14:16:16
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= NOSServer
State = Running normally
Pid = 7375
RC = 0
Signo = 0
Start = 10/31/14 14:16:20
Stop = Not applicable
Core = Not applicable
Info = NOSServer is up and running
Process= PTMServer
State = Running normally
Pid = 7376
RC = 0
Signo = 0
Start = 10/31/14 14:16:20
Stop = Not applicable
Core = Not applicable
Info = Started Successfully
Process= InventoryCollector
State = Running normally
Pid = 7377
RC = 0
Signo = 0
Start = 10/31/14 14:16:20
Stop = Not applicable
Core = Not applicable
Info = InventoryCollector is up and running
Process= Interactor
State = Program started - No mgt msgs received
Pid = 7496
RC = 0
Signo = 0
Start = 10/31/14 14:16:24
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= InventoryCollector1
State = Program started - No mgt msgs received
Pid = 7497
RC = 0
Signo = 0
Start = 10/31/14 14:16:24
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= Interactor1
State = Program started - No mgt msgs received
Pid = 7589
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= UPMProcess
State = Running normally
Pid = 7590
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = UPMProcess started successfully.
Process= UTManager
State = Running normally
Pid = 7591
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= EssentialsDM
State = Running normally
Pid = 7592
RC = 0
Signo = 0
Start = 10/31/14 14:16:28
Stop = Not applicable
Core = Not applicable
Info = RME Device Management started.
Process= ICServer
State = Running normally
Pid = 7730
RC = 0
Signo = 0
Start = 10/31/14 14:16:31
Stop = Not applicable
Core = Not applicable
Info = ICServer started.
Process= EnergyWise
State = Running normally
Pid = 7923
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = EnergyWise Process is running normally Fri Oct 31 14:16:45 CST 2014
Process= PMCOGSServer
State = Program started - No mgt msgs received
Pid = 7924
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= ConfigMgmtServer
State = Running normally
Pid = 7925
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = DCMA is running normally Fri Oct 31 14:17:02 CST 2014
Process= ConfigUtilityService
State = Running normally
Pid = 7926
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = ConfigUtilityService started.
Process= CAAMServer
State = Running normally
Pid = 7927
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = CAAMServer started.
Process= VNMServer
State = Program started - No mgt msgs received
Pid = 7928
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= WlseUHIC
State = Running normally
Pid = 7929
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Started.
Process= IPMOGSServer
State = Program started - No mgt msgs received
Pid = 7940
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= TopoServer
State = Program started - No mgt msgs received
Pid = 7941
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= LicenseServer
State = Program started - No mgt msgs received
Pid = 7942
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= NameServer
State = Program started - No mgt msgs received
Pid = 7946
RC = 0
Signo = 0
Start = 10/31/14 14:16:35
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= NameServiceMonitor
State = Program started - No mgt msgs received
Pid = 8205
RC = 0
Signo = 0
Start = 10/31/14 14:16:39
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= EDS
State = Running normally
Pid = 8290
RC = 0
Signo = 0
Start = 10/31/14 14:16:43
Stop = Not applicable
Core = Not applicable
Info = Initialization complete
Process= ANIServer
State = Running with busy flag set
Pid = 8768
RC = 0
Signo = 0
Start = 10/31/14 14:17:14
Stop = Not applicable
Core = Not applicable
Info = ANIServer started.
Process= UTMajorAcquisition
State = Transient terminated
Pid = 0
RC = 0
Signo = 0
Start = 11/03/14 10:00:00
Stop = 11/03/14 10:14:13
Core = Not applicable
Info = Application started by administrator request.
Process= EDS-GCF
State = Running normally
Pid = 8807
RC = 0
Signo = 0
Start = 10/31/14 14:17:18
Stop = Not applicable
Core = Not applicable
Info = GCF Initialization complete at Fri Oct 31 14:17:53 CST 2014
Process= jrm
State = Running normally
Pid = 8808
RC = 0
Signo = 0
Start = 10/31/14 14:17:18
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= DataPurge
State = Administrator has shut down this server
Pid = 0
RC = 0
Signo = 0
Start = 10/31/14 14:18:12
Stop = 10/31/14 14:19:11
Core = Not applicable
Info = DataPurge initialization completed at Fri Oct 31 14:19:11 CST 2014.
Process= IPMProcess
State = Program started - No mgt msgs received
Pid = 9155
RC = 0
Signo = 0
Start = 10/31/14 14:18:12
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= CTMJrmServer
State = Running normally
Pid = 9156
RC = 0
Signo = 0
Start = 10/31/14 14:18:12
Stop = Not applicable
Core = Not applicable
Info = CTMJrmServer started.
Process= SyslogAnalyzer
State = Running normally
Pid = 9246
RC = 0
Signo = 0
Start = 10/31/14 14:18:23
Stop = Not applicable
Core = Not applicable
Info = SyslogAnalyzerService Started at Fri Oct 31 14:18:35 CST 2014
Process= ChangeAudit
State = Program started - No mgt msgs received
Pid = 9247
RC = 0
Signo = 0
Start = 10/31/14 14:18:23
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= 1014
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1965
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1964
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 2360
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3056
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3104
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1001
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3177
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 3206
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1015
State = Never started
Pid = 0
RC = 0
Signo = 0
Start = N/A
Stop = Not applicable
Core = Not applicable
Info = Not applicable,
Process= 1524
State = Program started - No mgt msgs received
Pid = 21804
RC = 0
Signo = 0
Start = 11/02/14 19:00:00
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= 3306
State = Program started - No mgt msgs received
Pid = 17433
RC = 0
Signo = 0
Start = 11/03/14 11:37:17
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Process= 1005
State = Running normally
Pid = 19289
RC = 0
Signo = 0
Start = 11/03/14 12:00:00
Stop = Not applicable
Core = Not applicable
Info = 1005 started.
Process= diskWatcher
State = Program started - No mgt msgs received
Pid = 9249
RC = 0
Signo = 0
Start = 10/31/14 14:18:23
Stop = Not applicable
Core = Not applicable
Info = Application started by administrator request.
Thanks in advance for your help.
Best regards.Also when i click the alarms bar that is sitting in the bottom right i got these in DFMOGSServer.log
[ Thu Nov 06 15:25:37 CST 2014 ] ERROR com.cisco.nm.xms.ogs.kilner10.KilnerEventConsolidator makeEvent - MAKE CONSOLIDATED_DFMOGS_EVENT: 9 data:
[ Thu Nov 06 15:25:46 CST 2014 ] FATAL com.cisco.nm.xms.ogs.server.OGSServer main - Exception while OGS Server start up: CTMRegistryClient::addNewURNEntry URN : ogs_server_urn ErrMsg : URN already in use
com.cisco.nm.xms.ogs.util.OGSException: CTMRegistryClient::addNewURNEntry URN : ogs_server_urn ErrMsg : URN already in use
at com.cisco.nm.xms.ogs.server.OGSImpl.publishURN(OGSImpl.java:1396)
at com.cisco.nm.xms.ogs.server.OGSServer.main(OGSServer.java:73)
[ Thu Nov 06 15:31:54 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl isUserInTable -
java.lang.NullPointerException
at com.cisco.nm.trx.epm.providers.persistence.ResultSetWrapper.next(Unknown Source)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.isUserInTable(GroupUserImpl.java:171)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.processCommand(GroupUserImpl.java:61)
at com.cisco.nm.cuom.eventmon.webapp.AbstractCommandProcessor.execute(AbstractCommandProcessor.java:94)
at com.cisco.nm.cuom.eventmon.webapp.EventMonitoringServlet.doPost(EventMonitoringServlet.java:202)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:311)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:776)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:705)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:898)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
at java.lang.Thread.run(Thread.java:662)
[ Thu Nov 06 15:31:54 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() called with Unreachable Devices
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() Got 9 devices from TIS
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() called with Unmanaged Devices
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() called with Suspended Devices
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.GroupManager getDevicesForNonOGSGroup - getDevicesForNonOGSGroup() Got 0 devices from TIS
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl isUserInTable -
java.lang.NullPointerException
at com.cisco.nm.trx.epm.providers.persistence.ResultSetWrapper.next(Unknown Source)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.isUserInTable(GroupUserImpl.java:171)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.processCommand(GroupUserImpl.java:61)
at com.cisco.nm.cuom.eventmon.webapp.AbstractCommandProcessor.execute(AbstractCommandProcessor.java:94)
at com.cisco.nm.cuom.eventmon.webapp.EventMonitoringServlet.doPost(EventMonitoringServlet.java:202)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:311)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:776)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:705)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:898)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
at java.lang.Thread.run(Thread.java:662)
[ Thu Nov 06 15:31:55 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl isUserInTable -
java.lang.NullPointerException
at com.cisco.nm.trx.epm.providers.persistence.ResultSetWrapper.next(Unknown Source)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.isUserInTable(GroupUserImpl.java:171)
at com.cisco.nm.cuom.eventmon.webapp.GroupUserImpl.processCommand(GroupUserImpl.java:61)
at com.cisco.nm.cuom.eventmon.webapp.AbstractCommandProcessor.execute(AbstractCommandProcessor.java:94)
at com.cisco.nm.cuom.eventmon.webapp.EventMonitoringServlet.doPost(EventMonitoringServlet.java:202)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.jk.server.JkCoyoteHandler.invoke(JkCoyoteHandler.java:190)
at org.apache.jk.common.HandlerRequest.invoke(HandlerRequest.java:311)
at org.apache.jk.common.ChannelSocket.invoke(ChannelSocket.java:776)
at org.apache.jk.common.ChannelSocket.processConnection(ChannelSocket.java:705)
at org.apache.jk.common.ChannelSocket$SocketConnection.runIt(ChannelSocket.java:898)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:690)
at java.lang.Thread.run(Thread.java:662)
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
[ Thu Nov 06 15:32:05 CST 2014 ] ERROR com.cisco.nm.cuom.eventmon.api.impl.HbmDBManager executeQuery - ExecuteQuery, returnList is empty or NULL, []
Don´t know much about databases, but it seems im missing some important tables or data -
How to build a Matrix with Group Left Report
I want to build a Matrix with Group Left Report,not Matrix with Group Above Report,i am still finding the solution, any help is useful.
thanks
<[email protected]>Hi,
The problem in your output is not clear. The report output should appear like:
Order Mode.....Sales_Rep_ID > 10..11..12..
Online.........Order Status
...............A..............x....x...x
...............B..............x....x...x
...............C..............x....x...x
Order Mode.....Sales_Rep_ID > 10..11..12..
Retail.........Order Status
...............A..............x....x...x
...............B..............x....x...x
...............C..............x....x...x
Here "Order Mode" is the group field (it repeats for every group). Could you pl specify what output you are getting?
If the problem is that you don't want the Title (like "Order Mode" in the above example) to print in every group, just place it outside the group repeating frame. It will print only once.
Navneet. -
HI BPC Friends
I have created Journal Entry Template with header Information Groups and so on.
I have entered one Journal Entry with groups='EUR' and saved it.
I have seen that it saved the journal with groups= 'LC'
Is not possible to do a Journal with groups='EUR'?
thanks
regards
Michele MedagliaHi
Another approach is to create a folder in the local Administrators Home folder. Name it Applications. Place the applications you want to restrict access to into that folder. If you have ARD you could use the mkdir and mv commands to achieve this. In some situations I find this an easier way of managing applications rather than what's available in WorkGroup Manager. For me it only tends to work with Apple's built in applications effectively. Anything else is liable to cause a problem along the lines you mention. Some 3rd-Party applications can have dependencies that may be sited in different locations. The trick is tracking down them.
Tony -
Count(*) with group by max(date)
SQL> select xdesc,xcust,xdate from coba1 order by xdesc,xcust,xdate;
XDESC XCUST XDATE
RUB-A 11026 01-JAN-06
RUB-A 11026 05-JAN-06
RUB-A 11026 08-JAN-06
RUB-A 11027 10-JAN-06
RUB-B 11026 02-JAN-06
RUB-B 11026 08-JAN-06
RUB-B 11026 09-JAN-06
RUB-C 11027 08-JAN-06
I want to make sql that result :
XDESC COUNT(*)
RUB-A 2
RUB-B 1
RUB-C 1
Criteria : GROUPING: XDESC XCUST AND MAX(DATE)
bellow mark *** that was selected in count.
XDESC XCUST XDATE
RUB-A 11026 01-JAN-06
RUB-A 11026 05-JAN-06
RUB-A 11026 08-JAN-06 ***
RUB-A 11027 10-JAN-06 ***
---------------------------------------------------------COUNT RUB-A = 2
RUB-B 11026 02-JAN-06
RUB-B 11026 08-JAN-06
RUB-B 11026 09-JAN-06 ***
---------------------------------------------------------COUNT RUB-B = 1
RUB-C 11027 08-JAN-06 ***
--------------------------------------------------------COUNT RUB-C = 1
Can Anybody help ?
I tried :
select xdesc,max(xdate),count(max(xdate)) from coba1 group by xdesc
ERROR at line 1:
ORA-00937: not a single-group group function
ThankThis one is duplicate. see the following link
Count(*) with group by max(date)
Thanks -
Flash Islands, AdvancedDataGrid, problem with grouping
Hello,
I am trying to show a table from SAP into an AdvancedDataGrid:
<mx:AdvancedDataGrid dataProvider="" width="100%" rowCount="13" >
<mx:columns>
<mx:AdvancedDataGridColumn dataField=""
headerText="Monat" />
This works very well. Now I am trying to build a tree with grouping in the same grid:
<mx:AdvancedDataGrid width="100%" rowCount="13">
<mx:dataProvider>
<mx:GroupingCollection source=""/>
<mx:Grouping>
<mx:GroupingField name=""/>
<mx:GroupingField name=""/>
</mx:Grouping>
</mx:dataProvider>
<mx:columns>
<mx:AdvancedDataGridColumn dataField="" headerText="Monat"/>
Unfortunatly I get an empty table. Does anybody know my mistake?
regards
stefanThx for reply. I understand what you mean. I was a littlebit to hasty. I should have waited until finishing everything. Point 3.c in the chapter mentioned above states it clearly.
Sorry 4 that. -
PDF's I'm creating with Group 4 data report Insufficient Data for Image
I am maintaining a software application, which creates PDF files from JPEG and TIFF (with Group 4 compression) image files, which typically come from scanners. It has performed well for many years, but as of the release of Adobe Reader X, we are seeing "Insufficient Data for Image" on some images.
I've read reports of this message on these forums, and I've tried shrinking the image, adjusting zoom, and upgrading to Adobe Reader XI -- none of these have worked.
Our software creates these PDF files by wrapping the raw image data in an XObject, which looks like this:
24 0 obj
<< /Type /XObject
/Subtype /Image
/Name /Im1
/Filter /CCITTFaxDecode
/Width 1704
/Height 2200
/BitsPerComponent 1
/ColorSpace /DeviceGray
/DecodeParms <</K -1 /Columns 1704 /Rows 2200 >>
/Length 25 0 R >>
stream
<<BINARY DATA>>
endstream
endobj
25 0 obj
31512
endobj
Wherein, the <<BINARY DATA>> are 31,512 bytes of raw image data -- the same data which would appear in a Group 4 compressed TIFF file.
Indeed, when we do create a Group 4 TIFF file with the same binary data, it opens successfully in all common viewers.
Any assistance, such as the precise meaning of this error message, could be helpful.Just a note that the bug appears to relate to JPXDecode, so far as all previous reports seem to suggest (no inside information). JPXDecode supports multiple image resolutions in the same image, so messing with zoom sometimes helps. If you can post a complete file somewhere it might interest someone who could analyse it.
The message simply means that decompressing the filters does not yield enough bytes. This may either reflect that there really isn't enough data, or it could indicate any kind of data error (which causes the filter to silently return EOF). -
I created a wsdl based on a dbadapter in jdeveloper, imported into eclipse and created the biz and the proxy and uploaded to oracle service bus, it works fine,
but happens now that i need to have a xsd and wsdl with business names and not table names, invented to create a xsd and wsdl file in jdeveloper
and then went to eclipse and tried t xquery tranformation, but when i add the replace in the message flow in the filed in Variable : body and Expression i look for the xquery and in the binding trying to put
$body/input parameter, get the following error [RouteNode1, Replace action] XQuery expression validation failed: The current configuration is out of sync with the XQuery resource in the repository.
what im doing wrong or its configuration
thanks in advance soniathanks
ok have created a table with only in column varchar2(1)
then the type object and the procedure to insert it works the proxy in the osb if i test it inserts
now in jdeveloper i created an xml file with
<?xml version="1.0" encoding="windows-1252" ?>
<vessel>
<barco>a</barco>
</vessel>
then i created a xsd based on this xml, and a wsdl based on the xsd
in eclipse created a xquery transformation and selected source as the xsd created in adf and target the xsd input parameter, dont know why in the purple ball of the input parameter it puts a ?, an a f.
then in the proxy xpath not writing anything in variable body and in the expression select the xquery and in binding select the parameter -
How can I see the windows 8 contacts in outlook 2013 with groups preserved
I an see my windows 8 contacts.
they are all nice and some are broken down into groups.
(I double clicked an old .wab and they imported nicely into windows 8, preserving groups)
now how can I see this same structure as an email lists with groups in outlook 2013? I see the emails, but no groups.
can you help?
thanksThose groups are not supported in outlook - outlook uses a different format for groups. You'll need to import the individual contacts into Outlook and recreate the groups.
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter -
Aggregate fuction with group by clause
Hello,
Following is assignment is given but i dont get correct output
so please i am request to all of us write code to solve my problem.
There can be multiple records for one customer in VBAK tables with different combinations.
Considering that we do not need details of each sales order,
use Aggregate functions with GROUP BY clause in SELECT to read the fields.
<garbled code removed>
Moderator Message: Please paste the relevant portions of the code
Edited by: Suhas Saha on Nov 18, 2011 1:48 PMSo if you need not want all the repeated records, then you select all the values to an Internal table,
and declare an internal table of same type and Usee COLLECT
for ex:
itab1 type <xxxx>.
wa_itba like line of itab1.
itab2 type <xxxx>. "<-This should be same type of above.
select * from ..... into table itab1.
and now...
loop at itab1 into wa_itab.
collect wa_itab1 into itab2.
endloop.
then you will get your desired result.. -
How to select the max rowid from a subquery with group by
Hi Gurus,
Kindly help how to fix the following query because I'm getting Oracle error:ORA-01446.
select * from edy_raw_data a
where rowid in ( select max(rowid) from(
select email,max(date_updated) from edy_raw_data b
where b.email=a.email
group by email ))
The query select the max rowid from a sub query with group by.
Thanks in Advance.
BenjieWhy do you need to compare with rowid?
Wouldn't this suffice?
select * from edy_raw_data a
where (email,date_updated) = (select email, max(date_updated) from edy_raw_data b
where b.email=a.email
group by b.email ))* Note: untested
Maybe you are looking for
-
How to connect to MsSql server in J2ee
I use J2ee, and it is connected to cloudscape by default. And I have download one Jdbc driver to connect to Mssqlserver. How can I install this driver to J2ee and set J2ee connected to MsSqlserver? Thank you very much! [email protected]
-
Hi.. What do u mean BY RR Queue? i know it is replication and reallignment queue.. But whats the need of this one? is it related to data flow with mobile..? 2) what do u mean LUW's? logical unit of work....?what is the significance of thi
-
What's up with rosetta??
Hey all, About a week ago I recieved my brand new, beautiful, black, macbook. It is very fast and I like it a lot better than my titanium Powerbook G4. So I transferred all of my files from my powerbook using the firewire transfer option that you get
-
Hello, I have Premiere Elements 10 and when I press the play button I can hear correct audio, however the visuals are stuck on the frame that I paused it on and I have to movie the footage around inside the playback area for the frame to update and s
-
LiveCycle crash when selecting a pdf for importing
I am trying to create a new form using LiveCycle and when I go though the initial wizard it asks me if I want to use a PDF as the basis for the form - I select it from my hard drive. It is an x1a format created from a layout I did in InDesign (CS4).