Oubli email de sécurité...
Bonjour.
Je voudrais effectuer un achat sur iTunes sauf que j'ai oublié mon e-mail de secours ainsi que les réponses aux questions posées.
Quelqu'un a-t-il une solution?
You will have to contact Support in your country to get them reset, you won't be able to view and/or change your rescue email address until you can answer your questions.
Contacting Apple about account security : Apple ID: Contacting Apple for help with Apple ID account security.
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html
When they've been reset you can then view and/or change your rescue email address for potential future use : Manage your Apple ID primary, rescue, alternate, and notification email addresses.
Or if it's available in your country you could change to 2-step verification : Frequently asked questions about two-step verification for Apple ID.
http://translate.google.com
Vous devrez contacter l'assistance dans votre pays pour obtenir les réinitialiser, vous ne serez pas en mesure d'afficher et / ou modifier votre adresse e-mail de sauvetage jusqu'à ce que vous pouvez répondre à vos questions.
Contacter Apple à propos de la sécurité des comptes: Identifiant Apple : contacter Apple pour obtenir des informations sur la sécurité d’un compte lié à un identifiant.
Si votre pays ne est pas sur cette page puis essayez ce formulaire et expliquer et voir ce qu'ils répondent avec: https://ssl.apple.com/emea/support/itunes/contact.html
Quand ils ont été remis à zéro, vous pouvez ensuite visualiser et / ou modifier votre secours adresse e-mail pour une utilisation future potentielle: Manage your Apple ID primary, rescue, alternate, and notification email addresses.
Ou si elle est disponible dans votre pays vous pouvez changer à la vérification en 2 étapes: http://support.apple.com/en-gb/HT5570
Similar Messages
-
This is a tricky one, we've had a total of three different folks try to figure this out to no avail...
There is an issue that crops up intermittently when trying to send and PDF file through email. Adobe-File-send through email. Adobe and the email gets locked up with the following error message: "Microsoft Office Outlook, The operation failed due to network or other communication problems. Check your connections and try again."
Both web generated (internal web app uses fpdf to create pdfs - http://www.fpdf.org/) and non-web generated pdfs cause this error to happen (so saving the PDF and then emailing does not cure this).
While doing research on this issue, we had found that Microsoft is blaming this error on Adobe in their knowledge base articles and Adobe is blaming this error on Microsoft in their knowledge base articles.
Based on suggestions from a previous web searches all of the following did not fix the problem...
- running Outlook in safe mode
- tried to replace normal.dot
- Open the "run" command: Start->Run:Regsvr32.exe %Windir%\System32\Ole32.dll
- changed some settings in Internet Explorer. Under Tools, Internet Options, Program tab, change HTML editor to 'MS Word' and everything else to 'MS Outlook'
TIA!Since you are trying a bunch of stuff, you might try to disable WORD as your outlook editor. A lot of folks like WORD for editing Outlook, but it has been a know problem in the past. A lot of folks like me also detest the fancy e-mails that are becoming common. But that is my preference, does not need to be yours.
-
Upgraded to 10.9.2 and now i get the warning "The value in the "Copies" field is out of range" when I try to print an email. Mail then crashes and reopens - any suggestions on a cure? I've reinstalled my printer a Brother MFC-J6510DW but nothings changed.
Process: Preview [2135]
Path: /Applications/Preview.app/Contents/MacOS/Preview
Identifier: com.apple.Preview
Version: 7.0 (826.4)
Build Info: Preview-826004000000000~2
Code Type: X86-64 (Native)
Parent Process: launchd [254]
Responsible: Preview [2135]
User ID: 501
Date/Time: 2014-03-03 19:02:01.529 +0000
OS Version: Mac OS X 10.9.2 (13C64)
Report Version: 11
Anonymous UUID:
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000018
VM Regions Near 0x18:
-->
__TEXT 00000001031d7000-00000001033bb000 [ 1936K] r-x/rwx SM=COW /Applications/Preview.app/Contents/MacOS/Preview
Application Specific Information:
objc_msgSend() selector name: retain
Performing @selector(buttonPressed:) from sender NSButton 0x600000159230
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libobjc.A.dylib 0x00007fff8b7f2097 objc_msgSend + 23
1 com.apple.AppKit 0x00007fff90352045 -[NSAlert didEndAlert:returnCode:contextInfo:] + 50
2 com.apple.AppKit 0x00007fff903518d9 -[NSApplication endSheet:returnCode:] + 320
3 com.apple.AppKit 0x00007fff9035166d -[NSAlert buttonPressed:] + 107
4 com.apple.AppKit 0x00007fff90216340 -[NSApplication sendAction:to:from:] + 327
5 com.apple.AppKit 0x00007fff902161be -[NSControl sendAction:to:] + 86
6 com.apple.AppKit 0x00007fff90262ced -[NSCell _sendActionFrom:] + 128
7 com.apple.AppKit 0x00007fff9027c6c5 -[NSCell trackMouse:inRect:ofView:untilMouseUp:] + 2316
8 com.apple.AppKit 0x00007fff9027ba97 -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] + 487
9 com.apple.AppKit 0x00007fff9027b1ad -[NSControl mouseDown:] + 706
10 com.apple.AppKit 0x00007fff901fcb48 -[NSWindow sendEvent:] + 11296
11 com.apple.AppKit 0x00007fff9019b6e4 -[NSApplication sendEvent:] + 2021
12 com.apple.Preview 0x00000001031dac80 0x1031d7000 + 15488
13 com.apple.AppKit 0x00007fff8ffebb89 -[NSApplication run] + 646
14 com.apple.AppKit 0x00007fff8ffd6913 NSApplicationMain + 940
15 libdyld.dylib 0x00007fff935085fd start + 1
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff8b4d5662 kevent64 + 10
1 libdispatch.dylib 0x00007fff8b5c343d _dispatch_mgr_invoke + 239
2 libdispatch.dylib 0x00007fff8b5c3152 _dispatch_mgr_thread + 52
Thread 2:
0 libsystem_kernel.dylib 0x00007fff8b4d4e6a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x00007fff8df73f08 _pthread_wqthread + 330
2 libsystem_pthread.dylib 0x00007fff8df76fb9 start_wqthread + 13
Thread 3:
0 libsystem_kernel.dylib 0x00007fff8b4d4e6a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x00007fff8df73f08 _pthread_wqthread + 330
2 libsystem_pthread.dylib 0x00007fff8df76fb9 start_wqthread + 13
Thread 4:
0 libsystem_kernel.dylib 0x00007fff8b4d4e6a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x00007fff8df73f08 _pthread_wqthread + 330
2 libsystem_pthread.dylib 0x00007fff8df76fb9 start_wqthread + 13
Thread 5:
0 libsystem_kernel.dylib 0x00007fff8b4d4e6a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x00007fff8df73f08 _pthread_wqthread + 330
2 libsystem_pthread.dylib 0x00007fff8df76fb9 start_wqthread + 13
Thread 6:
0 libsystem_kernel.dylib 0x00007fff8b4d0a1a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff8b4cfd18 mach_msg + 64
2 com.apple.CoreFoundation 0x00007fff8ddf7155 __CFRunLoopServiceMachPort + 181
3 com.apple.CoreFoundation 0x00007fff8ddf6779 __CFRunLoopRun + 1161
4 com.apple.CoreFoundation 0x00007fff8ddf60b5 CFRunLoopRunSpecific + 309
5 com.apple.AppKit 0x00007fff9019816e _NSEventThread + 144
6 libsystem_pthread.dylib 0x00007fff8df72899 _pthread_body + 138
7 libsystem_pthread.dylib 0x00007fff8df7272a _pthread_start + 137
8 libsystem_pthread.dylib 0x00007fff8df76fc9 thread_start + 13
Thread 7:: com.apple.CoreAnimation.render-server
0 libsystem_kernel.dylib 0x00007fff8b4d0a1a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff8b4cfd18 mach_msg + 64
2 com.apple.QuartzCore 0x00007fff918a0377 CA::Render::Server::server_thread(void*) + 195
3 com.apple.QuartzCore 0x00007fff918a02ad thread_fun + 25
4 libsystem_pthread.dylib 0x00007fff8df72899 _pthread_body + 138
5 libsystem_pthread.dylib 0x00007fff8df7272a _pthread_start + 137
6 libsystem_pthread.dylib 0x00007fff8df76fc9 thread_start + 13
Thread 8:: com.apple.NSURLConnectionLoader
0 libsystem_kernel.dylib 0x00007fff8b4d0a1a mach_msg_trap + 10
1 libsystem_kernel.dylib 0x00007fff8b4cfd18 mach_msg + 64
2 com.apple.CoreFoundation 0x00007fff8ddf7155 __CFRunLoopServiceMachPort + 181
3 com.apple.CoreFoundation 0x00007fff8ddf6779 __CFRunLoopRun + 1161
4 com.apple.CoreFoundation 0x00007fff8ddf60b5 CFRunLoopRunSpecific + 309
5 com.apple.Foundation 0x00007fff97f3a967 +[NSURLConnection(Loader) _resourceLoadLoop:] + 348
6 com.apple.Foundation 0x00007fff97f3a76b __NSThread__main__ + 1318
7 libsystem_pthread.dylib 0x00007fff8df72899 _pthread_body + 138
8 libsystem_pthread.dylib 0x00007fff8df7272a _pthread_start + 137
9 libsystem_pthread.dylib 0x00007fff8df76fc9 thread_start + 13
Thread 9:: JavaScriptCore::BlockFree
0 libsystem_kernel.dylib 0x00007fff8b4d4716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff8df74c3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8d5cb9c5 JSC::BlockAllocator::blockFreeingThreadMain() + 261
3 com.apple.JavaScriptCore 0x00007fff8d5c0c5f ***::wtfThreadEntryPoint(void*) + 15
4 libsystem_pthread.dylib 0x00007fff8df72899 _pthread_body + 138
5 libsystem_pthread.dylib 0x00007fff8df7272a _pthread_start + 137
6 libsystem_pthread.dylib 0x00007fff8df76fc9 thread_start + 13
Thread 10:: JavaScriptCore::Marking
0 libsystem_kernel.dylib 0x00007fff8b4d4716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff8df74c3b _pthread_cond_wait + 727
2 com.apple.JavaScriptCore 0x00007fff8d5cc437 JSC::GCThread::waitForNextPhase() + 119
3 com.apple.JavaScriptCore 0x00007fff8d5cc2c8 JSC::GCThread::gcThreadMain() + 88
4 com.apple.JavaScriptCore 0x00007fff8d5c0c5f ***::wtfThreadEntryPoint(void*) + 15
5 libsystem_pthread.dylib 0x00007fff8df72899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff8df7272a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff8df76fc9 thread_start + 13
Thread 11:: CVDisplayLink
0 libsystem_kernel.dylib 0x00007fff8b4d4716 __psynch_cvwait + 10
1 libsystem_pthread.dylib 0x00007fff8df74c77 _pthread_cond_wait + 787
2 com.apple.CoreVideo 0x00007fff8f604464 CVDisplayLink::waitUntil(unsigned long long) + 244
3 com.apple.CoreVideo 0x00007fff8f603998 CVDisplayLink::runIOThread() + 496
4 com.apple.CoreVideo 0x00007fff8f60378f startIOThread(void*) + 147
5 libsystem_pthread.dylib 0x00007fff8df72899 _pthread_body + 138
6 libsystem_pthread.dylib 0x00007fff8df7272a _pthread_start + 137
7 libsystem_pthread.dylib 0x00007fff8df76fc9 thread_start + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x2400869279463432 rbx: 0x0000000000000000 rcx: 0x0000000000000001 rdx: 0x00006080001fb900
rdi: 0x0000608000362dc0 rsi: 0x00007fff90a24ccc rbp: 0x00007fff5ca28320 rsp: 0x00007fff5ca282e8
r8: 0x0000000000000000 r9: 0x00007fff5ca28200 r10: 0x00007fff90a24ccc r11: 0x0000000000000000
r12: 0x00006000001d9140 r13: 0x0000000000000001 r14: 0x0000000000000080 r15: 0x00006080001fb900
rip: 0x00007fff8b7f2097 rfl: 0x0000000000010246 cr2: 0x0000000000000018
Logical CPU: 1
Error Code: 0x00000004
Trap Number: 14
Binary Images:
0x1031d7000 - 0x1033bafef com.apple.Preview (7.0 - 826.4) <40BAB370-D0EA-399C-94E0-F67F8131AAC7> /Applications/Preview.app/Contents/MacOS/Preview
0x10346c000 - 0x103497fff com.apple.MediaUI (1.1 - 27) <2482C4A0-6D72-3870-AEF1-31F6015F2719> /System/Library/PrivateFrameworks/MediaUI.framework/Versions/A/MediaUI
0x10794c000 - 0x107952ff7 com.apple.BookKit (1.0.1 - 158) <34C7F87F-63B6-3E53-A7B1-8A6656405F41> /System/Library/PrivateFrameworks/BookKit.framework/BookKit
0x10795c000 - 0x107966ff7 com.apple.qldisplay.Web2 (5.0 - 622.7) <1D685C40-BD8B-3852-8A3E-4E280EB789D1> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuickLookUI.f ramework/Versions/A/PlugIns/Web2.qldisplay/Contents/MacOS/Web2
0x107bb0000 - 0x107bcbff7 com.apple.qldisplay.Web (5.0 - 622.7) <3486110B-813F-3DC9-A58F-F7264BFC9D51> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuickLookUI.f ramework/Versions/A/PlugIns/Web.qldisplay/Contents/MacOS/Web
0x1082db000 - 0x1082dbff9 +cl_kernels (???) <1AD36BBE-D3E3-4229-B4A2-DD44D5007F34> cl_kernels
0x1082e0000 - 0x1082e1ff4 +cl_kernels (???) <4A968579-72EC-48F2-8262-2D27EE49C5EC> cl_kernels
0x10833d000 - 0x108423fef unorm8_bgra.dylib (2.3.58) <6E7397EF-CC78-3C15-8B21-05E7FB47F645> /System/Library/Frameworks/OpenCL.framework/Versions/A/Libraries/ImageFormats/u norm8_bgra.dylib
0x108894000 - 0x108895ffa +cl_kernels (???) <F3431A1D-FEE4-4EEF-8544-7E2120E1A058> cl_kernels
0x1089cf000 - 0x1089cfffb +cl_kernels (???) <2EF018F8-7100-45C9-9E0C-30E8DBDAD2EE> cl_kernels
0x108a01000 - 0x10914bff7 libclh.dylib (4.0.3 - 4.0.3) <5FAE3A43-C0DC-340F-B94A-2E3E2A767619> /System/Library/Extensions/GeForceTeslaGLDriver.bundle/Contents/MacOS/libclh.dy lib
0x1091ef000 - 0x1091fafff libGPUSupport.dylib (9.6) <039FC0EF-1B2C-3465-907B-A1856DCF5ADF> /System/Library/PrivateFrameworks/GPUSupport.framework/Versions/A/Libraries/lib GPUSupport.dylib
0x10ad93000 - 0x10adc5ff3 com.apple.print.framework.Print.Private (9.0 - 462) <5213B13B-9DEA-3D1C-A5C4-E7A6B9417A4C> /System/Library/PrivateFrameworks/PrintingPrivate.framework/Versions/Current/Pl ugins/PrintCocoaUI.bundle/Contents/MacOS/PrintCocoaUI
0x10adeb000 - 0x10adfcff7 +com.brother.print.pde.CocoaBRInkQuality10 (4.0.4 - 18) <DE4E311D-5CB5-130E-788D-B5E35E3C42EF> /Library/Printers/Brother/PDEs/BRInkQuality10.bundle/Contents/MacOS/BRInkQualit y10
0x10ae06000 - 0x10ae0cfff +com.brother.print.pde.CocoaSendFax (3.2.1 - 20) <01F8D969-7131-2ECC-899F-6A5ED9C7370F> /Library/Printers/Brother/PDEs/BRSendFax.bundle/Contents/MacOS/BRSendFax
0x10ae13000 - 0x10ae51ff7 com.apple.print.PrintingCocoaPDEs (9.0 - 462) <E303781E-7376-3D04-89AF-E063972C02A1> /System/Library/PrivateFrameworks/PrintingPrivate.framework/Versions/A/Plugins/ PrintingCocoaPDEs.bundle/Contents/MacOS/PrintingCocoaPDEs
0x10c15a000 - 0x10c17aff3 libPDFRIP.A.dylib (599.20.11) <6A8DA6F0-5D42-383A-84B5-4DF60B43047A> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/Resources/libPDFRI P.A.dylib
0x123440000000 - 0x12344086dfff com.apple.GeForceTeslaGLDriver (8.24.11 - 8.2.4) <AA787258-3655-3558-AC34-C5834A007A39> /System/Library/Extensions/GeForceTeslaGLDriver.bundle/Contents/MacOS/GeForceTe slaGLDriver
0x7fff6d82b000 - 0x7fff6d85e817 dyld (239.4) <2B17750C-ED1B-3060-B64E-21897D08B28B> /usr/lib/dyld
0x7fff8b295000 - 0x7fff8b29afff libmacho.dylib (845) <1D2910DF-C036-3A82-A3FD-44FF73B5FF9B> /usr/lib/system/libmacho.dylib
0x7fff8b29b000 - 0x7fff8b2a3ff3 libCGCMS.A.dylib (599.20.11) <BB1E8D63-9FA1-3588-AC5D-1980576ED62C> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCGCMS .A.dylib
0x7fff8b2a4000 - 0x7fff8b2adff7 libcldcpuengine.dylib (2.3.58) <C8785704-6195-3129-86CA-20F0F3C20F15> /System/Library/Frameworks/OpenCL.framework/Versions/A/Libraries/libcldcpuengin e.dylib
0x7fff8b2ae000 - 0x7fff8b49effd com.apple.WebKit2 (9537 - 9537.74.9) <3F7B257F-D0DA-3AA8-BE8B-0C5474FE9806> /System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/WebKit2
0x7fff8b4bf000 - 0x7fff8b4dbff7 libsystem_kernel.dylib (2422.90.20) <20E00C54-9222-359F-BD98-CB79ABED769A> /usr/lib/system/libsystem_kernel.dylib
0x7fff8b4dc000 - 0x7fff8b52dff3 com.apple.audio.CoreAudio (4.2.0 - 4.2.0) <BF4C2FE3-8BC8-30D1-8347-2A7221268794> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x7fff8b545000 - 0x7fff8b55dff7 com.apple.openscripting (1.4 - 157) <B3B037D7-1019-31E6-9D17-08E699AF3701> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x7fff8b55e000 - 0x7fff8b597ff7 com.apple.QD (3.50 - 298) <C1F20764-DEF0-34CF-B3AB-AB5480D64E66> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x7fff8b5c0000 - 0x7fff8b5dafff libdispatch.dylib (339.90.1) <F3CBFE1B-FCE8-3F33-A53D-9092AB382DBB> /usr/lib/system/libdispatch.dylib
0x7fff8b5e6000 - 0x7fff8b5e6fff com.apple.Accelerate (1.9 - Accelerate 1.9) <509BB27A-AE62-366D-86D8-0B06D217CF56> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x7fff8b5e7000 - 0x7fff8b5f3ff3 com.apple.AppleFSCompression (56 - 1.0) <5652B0D0-EB08-381F-B23A-6DCF96991FB5> /System/Library/PrivateFrameworks/AppleFSCompression.framework/Versions/A/Apple FSCompression
0x7fff8b5f4000 - 0x7fff8b663ff1 com.apple.ApplicationServices.ATS (360 - 363.3) <546E89D9-2AE7-3111-B2B8-2366650D22F0> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x7fff8b664000 - 0x7fff8b7b7ff7 com.apple.audio.toolbox.AudioToolbox (1.10 - 1.10) <3511ABFE-22E1-3B91-B86A-5E3A78CE33FD> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x7fff8b7c2000 - 0x7fff8b7ecff7 libsandbox.1.dylib (278.11) <9E5654BF-DCD3-3B15-9C63-209B2B2D2803> /usr/lib/libsandbox.1.dylib
0x7fff8b7ed000 - 0x7fff8b99af27 libobjc.A.dylib (551.1) <AD7FD984-271E-30F4-A361-6B20319EC73B> /usr/lib/libobjc.A.dylib
0x7fff8b99b000 - 0x7fff8b9a5ff7 com.apple.ProtocolBuffer (1 - 182.1.3) <82E68598-A8AA-3AF1-843E-2A64F19472D4> /System/Library/PrivateFrameworks/ProtocolBuffer.framework/Versions/A/ProtocolB uffer
0x7fff8b9a6000 - 0x7fff8badcff6 com.apple.WebKit (9537 - 9537.74.9) <CA0C0387-8A66-34D4-8B1C-F5CDDBDA76BB> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x7fff8badd000 - 0x7fff8bb1efff com.apple.PerformanceAnalysis (1.47 - 47) <784ED7B8-FAE4-36CE-8C76-B7D300316C9F> /System/Library/PrivateFrameworks/PerformanceAnalysis.framework/Versions/A/Perf ormanceAnalysis
0x7fff8bb1f000 - 0x7fff8bb47ffb libxslt.1.dylib (13) <C9794936-633C-3F0C-9E71-30190B9B41C1> /usr/lib/libxslt.1.dylib
0x7fff8bb55000 - 0x7fff8bc17ff5 com.apple.CoreText (352.0 - 367.19) <24848DF1-67EC-3D41-9548-1F14C6DFBBF9> /System/Library/Frameworks/CoreText.framework/Versions/A/CoreText
0x7fff8be0d000 - 0x7fff8be15ffc libGFXShared.dylib (9.6) <E276D384-3616-3511-B5F2-92621D6372D6> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.d ylib
0x7fff8be16000 - 0x7fff8be18ffb libutil.dylib (34) <DAC4A6CF-A1BB-3874-9569-A919316D30E8> /usr/lib/libutil.dylib
0x7fff8be19000 - 0x7fff8be21ff7 com.apple.speech.recognition.framework (4.2.4 - 4.2.4) <98BBB3E4-6239-3EF1-90B2-84EA0D3B8D61> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x7fff8be22000 - 0x7fff8beaaff7 com.apple.CorePDF (4.0 - 4) <92D15ED1-D2E1-3ECB-93FF-42888219A99F> /System/Library/PrivateFrameworks/CorePDF.framework/Versions/A/CorePDF
0x7fff8beab000 - 0x7fff8bf76fff libvDSP.dylib (423.32) <3BF732BE-DDE0-38EB-8C54-E4E3C64F77A7> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x7fff8bf79000 - 0x7fff8bf7cffc com.apple.IOSurface (91 - 91) <07CA8A59-1E32-3FB6-B506-18DAF58A8CE0> /System/Library/Frameworks/IOSurface.framework/Versions/A/IOSurface
0x7fff8bfd9000 - 0x7fff8bfdbfff com.apple.EFILogin (2.0 - 2) <C360E8AF-E9BB-3BBA-9DF0-57A92CEF00D4> /System/Library/PrivateFrameworks/EFILogin.framework/Versions/A/EFILogin
0x7fff8bfdc000 - 0x7fff8c005fff com.apple.DictionaryServices (1.2 - 208) <A539A058-BA57-35EE-AA08-D0B0E835127D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x7fff8c085000 - 0x7fff8c087ff7 com.apple.diagnosticlogcollection (10.0 - 1000) <5CA6D8A2-DEA6-33C3-91BC-F3B076C0500B> /System/Library/PrivateFrameworks/DiagnosticLogCollection.framework/Versions/A/ DiagnosticLogCollection
0x7fff8c088000 - 0x7fff8c0a4fff libresolv.9.dylib (54) <11C2C826-F1C6-39C6-B4E8-6E0C41D4FA95> /usr/lib/libresolv.9.dylib
0x7fff8c0a5000 - 0x7fff8c0a6fff liblangid.dylib (117) <9546E641-F730-3AB0-B3CD-E0E2FDD173D9> /usr/lib/liblangid.dylib
0x7fff8c331000 - 0x7fff8c33cfff libGL.dylib (9.6) <A2EF4E15-EA08-396D-A1D4-29E1CED6876A> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x7fff8c33d000 - 0x7fff8c3a1fff com.apple.datadetectorscore (5.0 - 354.3) <B92E87D1-2045-3AB2-AE3F-8F948B30518A> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
0x7fff8c77e000 - 0x7fff8c7b3ffb com.apple.datadetectors (5.0 - 246.0) <1C4C33FE-F364-3DBA-A1BC-4A53E594CFD3> /System/Library/PrivateFrameworks/DataDetectors.framework/Versions/A/DataDetect ors
0x7fff8c7b4000 - 0x7fff8c7cdff7 com.apple.Ubiquity (1.3 - 289) <C7F1B734-CE81-334D-BE41-8B20D95A1F9B> /System/Library/PrivateFrameworks/Ubiquity.framework/Versions/A/Ubiquity
0x7fff8c7ce000 - 0x7fff8c803ffc com.apple.LDAPFramework (2.4.28 - 194.5) <4ADD0595-25B9-3F09-897E-3FB790AD2C5A> /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
0x7fff8c804000 - 0x7fff8c82dfff GLRendererFloat (9.6) <16871296-2EB9-3FF6-AB00-3E2E55A45A63> /System/Library/Frameworks/OpenGL.framework/Versions/A/Resources/GLRendererFloa t.bundle/GLRendererFloat
0x7fff8c8ef000 - 0x7fff8c8f0fff libffi.dylib (18.1) <FEB76C94-97BA-39BC-B713-D086B9757BA5> /usr/lib/libffi.dylib
0x7fff8c8f1000 - 0x7fff8c916ff7 com.apple.printingprivate.framework.PrintingPrivate (9.0 - 126) <84D0F49D-BF93-3163-991B-A2D49B97C881> /System/Library/PrivateFrameworks/PrintingPrivate.framework/Versions/A/Printing Private
0x7fff8c917000 - 0x7fff8c91bfff com.apple.CommonPanels (1.2.6 - 96) <6B434AFD-50F8-37C7-9A56-162C17E375B3> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x7fff8c91c000 - 0x7fff8ca8cff8 com.apple.CFNetwork (673.2.1 - 673.2.1) <AE407146-CCF2-33DD-AAEA-6887FD6F45BA> /System/Library/Frameworks/CFNetwork.framework/Versions/A/CFNetwork
0x7fff8ca8d000 - 0x7fff8cb77fff libsqlite3.dylib (158) <00269BF9-43BE-39E0-9C85-24585B9923C8> /usr/lib/libsqlite3.dylib
0x7fff8cb78000 - 0x7fff8cb79ff7 libSystem.B.dylib (1197.1.1) <BFC0DC97-46C6-3BE0-9983-54A98734897A> /usr/lib/libSystem.B.dylib
0x7fff8cb7a000 - 0x7fff8cb80ff7 com.apple.XPCService (2.0 - 1) <2CE632D7-FE57-36CF-91D4-C57D0F2E0BFE> /System/Library/PrivateFrameworks/XPCService.framework/Versions/A/XPCService
0x7fff8cb81000 - 0x7fff8cb9eff7 com.apple.framework.Apple80211 (9.3.1 - 931.58) <D5B2DD15-3DCC-31F6-9320-3A20A887C5D5> /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
0x7fff8cb9f000 - 0x7fff8cbaffff libbsm.0.dylib (33) <2CAC00A2-1352-302A-88FA-C567D4D69179> /usr/lib/libbsm.0.dylib
0x7fff8cbb0000 - 0x7fff8cbbbff7 com.apple.NetAuth (5.0 - 5.0) <C811E662-9EC3-3B74-808A-A75D624F326B> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
0x7fff8cbbc000 - 0x7fff8cbccffb libsasl2.2.dylib (170) <C8E25710-68B6-368A-BF3E-48EC7273177B> /usr/lib/libsasl2.2.dylib
0x7fff8cbcd000 - 0x7fff8d01bfff com.apple.VideoToolbox (1.0 - 1273.49) <27177077-9107-3E06-ADAD-92B80E80CDCD> /System/Library/Frameworks/VideoToolbox.framework/Versions/A/VideoToolbox
0x7fff8d01c000 - 0x7fff8d023ff7 com.apple.phonenumbers (1.1.1 - 105) <767A63EB-244C-34F1-9FFA-D1A6BED60C31> /System/Library/PrivateFrameworks/PhoneNumbers.framework/Versions/A/PhoneNumber s
0x7fff8d024000 - 0x7fff8d024fff com.apple.AOSMigrate (1.0 - 1) <ABA8F3F2-BC96-3F89-AAF4-1AA459A0BCBD> /System/Library/PrivateFrameworks/AOSMigrate.framework/Versions/A/AOSMigrate
0x7fff8d025000 - 0x7fff8d2f9fc7 com.apple.vImage (7.0 - 7.0) <D241DBFA-AC49-31E2-893D-EAAC31890C90> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x7fff8d2fa000 - 0x7fff8d2ffff7 com.apple.MediaAccessibility (1.0 - 43) <D309D83D-5FAE-37A4-85ED-FFBDA8B66B82> /System/Library/Frameworks/MediaAccessibility.framework/Versions/A/MediaAccessi bility
0x7fff8d300000 - 0x7fff8d31cfff com.apple.frameworks.preferencepanes (16.0 - 16.0) <059E99D8-67C2-3B59-B5E7-850DD7A92D75> /System/Library/Frameworks/PreferencePanes.framework/Versions/A/PreferencePanes
0x7fff8d31d000 - 0x7fff8d40cfff libFontParser.dylib (111.1) <835A8253-6AB9-3AAB-9CBF-171440DEC486> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontParser.dylib
0x7fff8d40d000 - 0x7fff8d411ff7 libGIF.dylib (1042) <C57840F6-1C11-3273-B4FC-956950B94034> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x7fff8d412000 - 0x7fff8d4affff com.apple.imcore (10.0 - 1000) <DF924E35-74AB-389C-9279-1828518218F8> /System/Library/PrivateFrameworks/IMCore.framework/Versions/A/IMCore
0x7fff8d4b0000 - 0x7fff8d4cbff7 libCRFSuite.dylib (34) <FFAE75FA-C54E-398B-AA97-18164CD9789D> /usr/lib/libCRFSuite.dylib
0x7fff8d5b7000 - 0x7fff8d92effa com.apple.JavaScriptCore (9537 - 9537.74.4) <0942FE6B-3152-30FC-B92A-92A1C29C5295> /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
0x7fff8d92f000 - 0x7fff8dbc0ff7 com.apple.AOSKit (1.06 - 176) <35525B2F-B02F-31FD-A3B2-FD6AE6D32C11> /System/Library/PrivateFrameworks/AOSKit.framework/Versions/A/AOSKit
0x7fff8dbc1000 - 0x7fff8dbc2fff com.apple.TrustEvaluationAgent (2.0 - 25) <334A82F4-4AE4-3719-A511-86D0B0723E2B> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
0x7fff8dbc3000 - 0x7fff8dd31ff7 libBLAS.dylib (1094.5) <DE93A590-5FA5-32A2-A16C-5D7D7361769F> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x7fff8dd86000 - 0x7fff8df6bfff com.apple.CoreFoundation (6.9 - 855.14) <617B8A7B-FAB2-3271-A09B-C542E351C532> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff8df71000 - 0x7fff8df78ff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
0x7fff8dfa0000 - 0x7fff8dfacff7 com.apple.OpenDirectory (10.9 - 173.90.1) <E5EF8E1A-7214-36D0-AF0D-8D030DF6C2FC> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
0x7fff8e4a5000 - 0x7fff8e4a9ff7 libheimdal-asn1.dylib (323.15) <B8BF2B7D-E913-3544-AA6D-CAC119F81C7C> /usr/lib/libheimdal-asn1.dylib
0x7fff8e4aa000 - 0x7fff8e4effff libcurl.4.dylib (78.90.1) <818543D6-0CCE-3F18-9BF1-4D18B81018F3> /usr/lib/libcurl.4.dylib
0x7fff8e4f0000 - 0x7fff8e4f3fff com.apple.TCC (1.0 - 1) <32A075D9-47FD-3E71-95BC-BFB0D583F41C> /System/Library/PrivateFrameworks/TCC.framework/Versions/A/TCC
0x7fff8e4fe000 - 0x7fff8e57efff com.apple.CoreSymbolication (3.0 - 141) <B018335C-698B-3F87-AF1C-6115C4FA8954> /System/Library/PrivateFrameworks/CoreSymbolication.framework/Versions/A/CoreSy mbolication
0x7fff8e57f000 - 0x7fff8e580fff com.apple.AddressBook.ContactsData (8.0 - 1369) <BAF434EC-32B6-3F1C-8ABE-4419A15829FF> /System/Library/PrivateFrameworks/ContactsData.framework/Versions/A/ContactsDat a
0x7fff8e581000 - 0x7fff8e5f4fff com.apple.securityfoundation (6.0 - 55122.1) <1939DE0B-BC38-3E50-8A8C-3471C8AC4CD6> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x7fff8e5f5000 - 0x7fff8e602ff7 libxar.1.dylib (202) <5572AA71-E98D-3FE1-9402-BB4A84E0E71E> /usr/lib/libxar.1.dylib
0x7fff8e603000 - 0x7fff8e605fff libRadiance.dylib (1042) <B91D4B97-7BF3-3285-BCB7-4948BAAC23EE> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libRadiance.d ylib
0x7fff8e613000 - 0x7fff8e61eff7 com.apple.DirectoryService.Framework (10.9 - 173.90.1) <A9866D67-C5A8-36D1-A1DB-E2FA60328698> /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x7fff8e61f000 - 0x7fff8e64efd2 libsystem_m.dylib (3047.16) <B7F0E2E4-2777-33FC-A787-D6430B630D54> /usr/lib/system/libsystem_m.dylib
0x7fff8e64f000 - 0x7fff8e650ff7 libsystem_blocks.dylib (63) <FB856CD1-2AEA-3907-8E9B-1E54B6827F82> /usr/lib/system/libsystem_blocks.dylib
0x7fff8e651000 - 0x7fff8e715ff7 com.apple.backup.framework (1.5.2 - 1.5.2) <A3C552F0-670B-388F-93FA-D917F96ACE1B> /System/Library/PrivateFrameworks/Backup.framework/Versions/A/Backup
0x7fff8e716000 - 0x7fff8e740ff7 libpcap.A.dylib (42) <91D3FF51-D6FE-3C05-98C9-1182E0EC3D58> /usr/lib/libpcap.A.dylib
0x7fff8e74b000 - 0x7fff8e752fff com.apple.NetFS (6.0 - 4.0) <8E26C099-CE9D-3819-91A2-64EA929C6137> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
0x7fff8e753000 - 0x7fff8e759ff7 libsystem_platform.dylib (24.90.1) <3C3D3DA8-32B9-3243-98EC-D89B9A1670B3> /usr/lib/system/libsystem_platform.dylib
0x7fff8e75a000 - 0x7fff8e7c1ff7 com.apple.CoreUtils (2.0 - 200.34.4) <E53B97FE-E067-33F6-A9C1-D4EC2A20FB9F> /System/Library/PrivateFrameworks/CoreUtils.framework/Versions/A/CoreUtils
0x7fff8e7c2000 - 0x7fff8eaf8fff com.apple.MediaToolbox (1.0 - 1273.49) <AB8ED666-6D15-3367-A033-F4A8AD33C4E0> /System/Library/Frameworks/MediaToolbox.framework/Versions/A/MediaToolbox
0x7fff8eaf9000 - 0x7fff8eb3effe com.apple.HIServices (1.22 - 467.2) <B7FCF008-C241-3862-BC63-E6EF4006A6E4> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x7fff8eb3f000 - 0x7fff8eb7dff7 libGLImage.dylib (9.6) <DCF2E131-A65E-33B2-B32D-28FF01605AB1> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x7fff8eb7e000 - 0x7fff8eb87fff com.apple.DisplayServicesFW (2.8 - 360.8.14) <816A9CED-1BC0-3C76-8103-1B9BE0F723BB> /System/Library/PrivateFrameworks/DisplayServices.framework/Versions/A/DisplayS ervices
0x7fff8eb88000 - 0x7fff8ebd5ff2 com.apple.print.framework.PrintCore (9.0 - 428) <8D8253E3-302F-3DB2-9C5C-572CB974E8B3> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x7fff8ebd6000 - 0x7fff8ec05ff5 com.apple.GSS (4.0 - 2.0) <62046C17-5D09-346C-B08E-A664DBC18411> /System/Library/Frameworks/GSS.framework/Versions/A/GSS
0x7fff8ec06000 - 0x7fff8ec0efff libsystem_dnssd.dylib (522.90.2) <A0B7CF19-D9F2-33D4-8107-A62184C9066E> /usr/lib/system/libsystem_dnssd.dylib
0x7fff8ec1f000 - 0x7fff8ec36ffa libAVFAudio.dylib (32.2) <52DA516B-DE79-322C-9E1B-2658019289D7> /System/Library/Frameworks/AVFoundation.framework/Versions/A/Resources/libAVFAu dio.dylib
0x7fff8ec37000 - 0x7fff8ecc7fff com.apple.Metadata (10.7.0 - 800.23) <BFEE576F-D779-300B-B685-26A3A008710A> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x7fff8ecc8000 - 0x7fff8edceff7 com.apple.ImageIO.framework (3.3.0 - 1042) <6101F33E-CACC-3070-960A-9A2EA4BC5F44> /System/Library/Frameworks/ImageIO.framework/Versions/A/ImageIO
0x7fff8edcf000 - 0x7fff8edd4ff7 libunwind.dylib (35.3) <78DCC358-2FC1-302E-B395-0155B47CB547> /usr/lib/system/libunwind.dylib
0x7fff8edd5000 - 0x7fff8eddfff7 com.apple.CrashReporterSupport (10.9 - 538) <B487466B-3AA1-3854-A808-A61F049FA794> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
0x7fff8ede0000 - 0x7fff8ee69ff7 libsystem_c.dylib (997.90.3) <6FD3A400-4BB2-3B95-B90C-BE6E9D0D78FA> /usr/lib/system/libsystem_c.dylib
0x7fff8ee6a000 - 0x7fff8eed0fff com.apple.framework.CoreWiFi (2.0 - 200.21.1) <5491896D-78C5-30B6-96E9-D8DDECF3BE73> /System/Library/Frameworks/CoreWiFi.framework/Versions/A/CoreWiFi
0x7fff8eee9000 - 0x7fff8eef0ff8 liblaunch.dylib (842.90.1) <38D1AB2C-A476-385F-8EA8-7AB604CA1F89> /usr/lib/system/liblaunch.dylib
0x7fff8eef1000 - 0x7fff8ef33ff7 libauto.dylib (185.5) <F45C36E8-B606-3886-B5B1-B6745E757CA8> /usr/lib/libauto.dylib
0x7fff8ef34000 - 0x7fff8f018fff com.apple.coreui (2.1 - 231) <432DB40C-6B7E-39C8-9FB5-B95917930056> /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
0x7fff8f019000 - 0x7fff8f04afff com.apple.MediaKit (15 - 709) <23E33409-5C39-3F93-9E73-2B0E9EE8883E> /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
0x7fff8f0ae000 - 0x7fff8f0aeff7 libkeymgr.dylib (28) <3AA8D85D-CF00-3BD3-A5A0-E28E1A32A6D8> /usr/lib/system/libkeymgr.dylib
0x7fff8f0af000 - 0x7fff8f0ebff7 com.apple.ids (10.0 - 1000) <632F7192-0399-34C8-B6BB-463D2F4370E0> /System/Library/PrivateFrameworks/IDS.framework/Versions/A/IDS
0x7fff8f0ec000 - 0x7fff8f145fff libTIFF.dylib (1042) <51D02EEC-0D0C-34C1-91C8-D316473A3FEA> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x7fff8f146000 - 0x7fff8f151fff libkxld.dylib (2422.90.20) <EF476345-7A69-3AC0-95ED-0196FB8910CB> /usr/lib/system/libkxld.dylib
0x7fff8f1a8000 - 0x7fff8f1affff libcompiler_rt.dylib (35) <4CD916B2-1B17-362A-B403-EF24A1DAC141> /usr/lib/system/libcompiler_rt.dylib
0x7fff8f1b0000 - 0x7fff8f1b4ff7 libcache.dylib (62) <BDC1E65B-72A1-3DA3-A57C-B23159CAAD0B> /usr/lib/system/libcache.dylib
0x7fff8f1b8000 - 0x7fff8f1c2ff7 com.apple.AppSandbox (3.0 - 1) <9F27DC25-C566-3AEF-92D3-DCFE7836916D> /System/Library/PrivateFrameworks/AppSandbox.framework/Versions/A/AppSandbox
0x7fff8f241000 - 0x7fff8f3a7fff libGLProgrammability.dylib (9.6) <8807FAD2-11E2-3293-89D8-397B87334138> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
0x7fff8f3a8000 - 0x7fff8f3b9ff7 libsystem_asl.dylib (217.1.4) <655FB343-52CF-3E2F-B14D-BEBF5AAEF94D> /usr/lib/system/libsystem_asl.dylib
0x7fff8f3ba000 - 0x7fff8f3e1ff7 com.apple.shortcut (2.6 - 2.6) <A62BC973-6782-3893-B014-EC6503AB7EAD> /System/Library/PrivateFrameworks/Shortcut.framework/Versions/A/Shortcut
0x7fff8f3e2000 - 0x7fff8f3fbff7 com.apple.Kerberos (3.0 - 1) <F108AFEB-198A-3BAF-BCA5-9DFCE55EFF92> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x7fff8f418000 - 0x7fff8f53aff1 com.apple.avfoundation (2.0 - 651.12) <5261E6EA-7476-32B2-A12A-D42598A9B2EA> /System/Library/Frameworks/AVFoundation.framework/Versions/A/AVFoundation
0x7fff8f53b000 - 0x7fff8f53bfff com.apple.quartzframework (1.5 - 1.5) <3B2A72DB-39FC-3C5B-98BE-605F37777F37> /System/Library/Frameworks/Quartz.framework/Versions/A/Quartz
0x7fff8f55f000 - 0x7fff8f5bffff com.apple.ISSupport (1.9.9 - 57) <E1E343D7-222C-3458-9D1F-FC600B7F1C50> /System/Library/PrivateFrameworks/ISSupport.framework/Versions/A/ISSupport
0x7fff8f5ff000 - 0x7fff8f601ff7 com.apple.securityhi (9.0 - 55005) <405E2BC6-2B6F-3B6B-B48E-2FD39214F052> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x7fff8f602000 - 0x7fff8f627ff7 com.apple.CoreVideo (1.8 - 117.2) <4674339E-26D0-35FA-9958-422832B39B12> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x7fff8f628000 - 0x7fff8f676ff9 libstdc++.6.dylib (60) <0241E6A4-1368-33BE-950B-D0A175C41F54> /usr/lib/libstdc++.6.dylib
0x7fff8f679000 - 0x7fff8f690ff7 com.apple.CFOpenDirectory (10.9 - 173.90.1) <38A25261-C622-3F11-BFD3-7AFFC44D57B8> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
0x7fff8f691000 - 0x7fff8f6bfff7 com.apple.securityinterface (9.0 - 55047) <0346D8A9-2CAA-38F3-A741-5FBA5E9F1E7C> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x7fff8f72c000 - 0x7fff8f787ffb com.apple.AE (665.5 - 665.5) <BBA230F9-144C-3CAB-A77A-0621719244CD> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x7fff8f788000 - 0x7fff8f811fff com.apple.ColorSync (4.9.0 - 4.9.0) <B756B908-9AD1-3F5D-83F9-7A0B068387D2> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x7fff8f81b000 - 0x7fff8f8d3ff7 com.apple.DiscRecording (8.0 - 8000.4.6) <CDAAAD04-A1D0-3C67-ABCC-EFC9E8D44E7E> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
0x7fff8f9e5000 - 0x7fff8f9e7fff com.apple.SecCodeWrapper (3.0 - 1) <DE7CA981-2B8B-34AC-845D-06D5C8F10441> /System/Library/PrivateFrameworks/SecCodeWrapper.framework/Versions/A/SecCodeWr apper
0x7fff8f9e8000 - 0x7fff8f9eaff7 libquarantine.dylib (71) <7A1A2BCB-C03D-3A25-BFA4-3E569B2D2C38> /usr/lib/system/libquarantine.dylib
0x7fff8f9eb000 - 0x7fff8f9f0fff com.apple.DiskArbitration (2.6 - 2.6) <A4165553-770E-3D27-B217-01FC1F852B87> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x7fff8f9f1000 - 0x7fff8fb21ff7 com.apple.desktopservices (1.8.2 - 1.8.2) <76D6ED93-9D5A-3941-8B88-A1773290AE74> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x7fff8fb22000 - 0x7fff8fb80ff7 com.apple.corelocation (1486.17 - 1486.24) <9FBB29F0-E000-3190-A96C-9EAA5CCCA2A0> /System/Library/Frameworks/CoreLocation.framework/Versions/A/CoreLocation
0x7fff8fb81000 - 0x7fff8fd0eff7 GLEngine (9.6) <51D58F76-B9B3-3B4F-B65A-F6D213C2EED7> /System/Library/Frameworks/OpenGL.framework/Versions/A/Resources/GLEngine.bundl e/GLEngine
0x7fff8fd0f000 - 0x7fff8fd22ff7 com.apple.AppContainer (3.0 - 1) <BD342039-430E-39FE-BC2D-8F97B557548E> /System/Library/PrivateFrameworks/AppContainer.framework/Versions/A/AppContaine r
0x7fff8fd32000 - 0x7fff8fd66fff libssl.0.9.8.dylib (50) <B15F967C-B002-36C2-9621-3456D8509F50> /usr/lib/libssl.0.9.8.dylib
0x7fff8fd67000 - 0x7fff8fd67fff com.apple.CoreServices (59 - 59) <7A697B5E-F179-30DF-93F2-8B503CEEEFD5> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x7fff8fd68000 - 0x7fff8fd79fff com.apple.idsfoundation (10.0 - 1000) <D3E6646B-4118-30D3-B4F7-DA9A28B396E4> /System/Library/PrivateFrameworks/IDSFoundation.framework/Versions/A/IDSFoundat ion
0x7fff8fd7a000 - 0x7fff8fe2aff7 libvMisc.dylib (423.32) <049C0735-1808-39B9-943F-76CB8021744F> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x7fff8fe2b000 - 0x7fff8fe34ff3 libsystem_notify.dylib (121) <52571EC3-6894-37E4-946E-064B021ED44E> /usr/lib/system/libsystem_notify.dylib
0x7fff8fe35000 - 0x7fff8fe3efff com.apple.speech.synthesis.framework (4.7.1 - 4.7.1) <383FB557-E88E-3239-82B8-15F9F885B702> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x7fff8fe3f000 - 0x7fff8fe6cff2 com.apple.frameworks.CoreDaemon (1.3 - 1.3) <43A137C4-3E72-37DC-945F-92569C12AAD4> /System/Library/PrivateFrameworks/CoreDaemon.framework/Versions/B/CoreDaemon
0x7fff8ffd4000 - 0x7fff90b4afff com.apple.AppKit (6.9 - 1265.19) <12647F2F-3FE2-3D77-B3F0-33EFAFF2CEA7> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x7fff90b4b000 - 0x7fff90b6ffff com.apple.quartzfilters (1.8.0 - 1.7.0) <39C08086-9866-372F-9420-81F5689149DF> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzFilters .framework/Versions/A/QuartzFilters
0x7fff90ba1000 - 0x7fff90badff7 com.apple.HelpData (2.1.4 - 90) <BEA1C549-40D3-35BF-9204-CB679FCB0648> /System/Library/PrivateFrameworks/HelpData.framework/Versions/A/HelpData
0x7fff90bae000 - 0x7fff90fe1ffb com.apple.vision.FaceCore (3.0.0 - 3.0.0) <F42BFC9C-0B16-35EF-9A07-91B7FDAB7FC5> /System/Library/PrivateFrameworks/FaceCore.framework/Versions/A/FaceCore
0x7fff90fe2000 - 0x7fff90fecff7 libcsfde.dylib (380) <3A54B430-EC05-3DE9-86C3-00C1BEAC7F9B> /usr/lib/libcsfde.dylib
0x7fff90fed000 - 0x7fff90ff4ff3 libcopyfile.dylib (103) <5A881779-D0D6-3029-B371-E3021C2DDA5E> /usr/lib/system/libcopyfile.dylib
0x7fff90ff5000 - 0x7fff91025fff com.apple.IconServices (25 - 25.17) <4751127E-FBD5-3ED5-8510-08D4E4166EFE> /System/Library/PrivateFrameworks/IconServices.framework/Versions/A/IconService s
0x7fff91026000 - 0x7fff910f7fff com.apple.QuickLookUIFramework (5.0 - 622.7) <13841701-34C2-353D-868D-3E08D020C90F> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuickLookUI.f ramework/Versions/A/QuickLookUI
0x7fff910f8000 - 0x7fff9113ffff libFontRegistry.dylib (127) <A77A0480-AA5D-3CC8-8B68-69985CD546DC> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontRegistry.dylib
0x7fff91156000 - 0x7fff91537ffe libLAPACK.dylib (1094.5) <7E7A9B8D-1638-3914-BAE0-663B69865986> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x7fff91538000 - 0x7fff91542fff libcommonCrypto.dylib (60049) <8C4F0CA0-389C-3EDC-B155-E62DD2187E1D> /usr/lib/system/libcommonCrypto.dylib
0x7fff91543000 - 0x7fff91813ffc com.apple.CoreImage (9.2.7) <BF88A02E-994E-3970-AC62-04248CA8DC46> /System/Library/Frameworks/QuartzCore.framework/Versions/A/Frameworks/CoreImage .framework/Versions/A/CoreImage
0x7fff91879000 - 0x7fff91a15ff3 com.apple.QuartzCore (1.8 - 332.3) <80F1068F-4A34-34FB-9E05-A2DC0700D2F2> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x7fff91a16000 - 0x7fff91a24fff com.apple.opengl (9.6.0 - 9.6.0) <709F4A02-73A0-303C-86B5-85C596C8B707> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x7fff91a25000 - 0x7fff91a2bff7 libCGXCoreImage.A.dylib (599.20.11) <A787F160-6963-38B5-AF86-D5541E0492F1> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCGXCo reImage.A.dylib
0x7fff91a2c000 - 0x7fff91a39fff com.apple.Sharing (132.2 - 132.2) <F983394A-226D-3244-B511-FA51FDB6ADDA> /System/Library/PrivateFrameworks/Sharing.framework/Versions/A/Sharing
0x7fff91ac8000 - 0x7fff91b54ff7 com.apple.ink.framework (10.9 - 207) <8A50B893-AD03-3826-8555-A54FEAF08F47> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x7fff91b55000 - 0x7fff91b5bfff com.apple.AOSNotification (1.7.0 - 760.3) <7901B867-60F7-3645-BB3E-18C51A6FBCC6> /System/Library/PrivateFrameworks/AOSNotification.framework/Versions/A/AOSNotif ication
0x7fff91b5c000 - 0x7fff91b5cfff com.apple.Cocoa (6.8 - 20) <E90E99D7-A425-3301-A025-D9E0CD11918E> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x7fff91b5d000 - 0x7fff91b8cfff com.apple.DebugSymbols (106 - 106) <E1BDED08-523A-36F4-B2DA-9D5C712F0AC7> /System/Library/PrivateFrameworks/DebugSymbols.framework/Versions/A/DebugSymbol s
0x7fff92094000 - 0x7fff92097fff com.apple.help (1.3.3 - 46) <AE763646-D07A-3F9A-ACD4-F5CBD734EE36> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x7fff92098000 - 0x7fff92177fff libcrypto.0.9.8.dylib (50) <B95B9DBA-39D3-3EEF-AF43-44608B28894E> /usr/lib/libcrypto.0.9.8.dylib
0x7fff9217a000 - 0x7fff921e7fff com.apple.SearchKit (1.4.0 - 1.4.0) <B9B8D510-A27E-36B0-93E9-17146D9E9045> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x7fff921ef000 - 0x7fff92213fff libxpc.dylib (300.90.2) <AB40CD57-F454-3FD4-B415-63B3C0D5C624> /usr/lib/system/libxpc.dylib
0x7fff92253000 - 0x7fff9228efff com.apple.bom (14.0 - 193.1) <EF24A562-6D3C-379E-8B9B-FAE0E4A0EF7C> /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
0x7fff9228f000 - 0x7fff922adfff com.apple.facetimeservices (10.0 - 1000) <DED6A966-DF0E-3E58-BD34-D85ED82A99D7> /System/Library/PrivateFrameworks/FTServices.framework/Versions/A/FTServices
0x7fff92341000 - 0x7fff92390ff7 com.apple.framework.internetaccounts (2.1 - 210) <D7175985-03A5-315B-B788-FBDC0019B0EA> /System/Library/PrivateFrameworks/InternetAccounts.framework/Versions/A/Interne tAccounts
0x7fff92391000 - 0x7fff9239eff4 com.apple.Librarian (1.2 - 1) <F1A2744D-8536-32C7-8218-9972C6300DAE> /System/Library/PrivateFrameworks/Librarian.framework/Versions/A/Librarian
0x7fff9239f000 - 0x7fff923baff7 libPng.dylib (1042) <36FF1DDA-9804-33C5-802E-3FCA9879F0E6> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libPng.dylib
0x7fff92490000 - 0x7fff924b7ff7 libsystem_network.dylib (241.3) <8B1E1F1D-A5CC-3BAE-8B1E-ABC84337A364> /usr/lib/system/libsystem_network.dylib
0x7fff9251d000 - 0x7fff9256efff com.apple.QuickLookFramework (5.0 - 622.7) <17685CEC-C94B-3F83-ADE1-B24840B35E44> /System/Library/Frameworks/QuickLook.framework/Versions/A/QuickLook
0x7fff9256f000 - 0x7fff92580ff7 libz.1.dylib (53) <42E0C8C6-CA38-3CA4-8619-D24ED5DD492E> /usr/lib/libz.1.dylib
0x7fff92581000 - 0x7fff92ea0af3 com.apple.CoreGraphics (1.600.0 - 599.20.11) <06212100-8069-31A1-9C44-F6C4B1695230> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics
0x7fff92ea1000 - 0x7fff9318bfff com.apple.CoreServices.CarbonCore (1077.17 - 1077.17) <3A2E92FD-DEE2-3D45-9619-11500801A61C> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x7fff931a8000 - 0x7fff93401ff9 com.apple.security (7.0 - 55471.14) <3F7100A0-FE46-333D-9A4B-396580F1B4FE> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff93402000 - 0x7fff93449ff7 libcups.2.dylib (372.2) <37802F24-BCC2-3721-8E12-82B29B61B2AA> /usr/lib/libcups.2.dylib
0x7fff9344c000 - 0x7fff9344dff7 libsystem_sandbox.dylib (278.11) <5E5A6E09-33A9-391A-AB34-E57D93BB1551> /usr/lib/system/libsystem_sandbox.dylib
0x7fff9345d000 - 0x7fff93486ff7 libc++abi.dylib (49.1) <21A807D3-6732-3455-B77F-743E9F916DF0> /usr/lib/libc++abi.dylib
0x7fff93494000 - 0x7fff934abfff com.apple.ScriptingBridge (1.3.1 - 63) <CE24DD07-7A89-3105-AE57-A1BED0189292> /System/Library/Frameworks/ScriptingBridge.framework/Versions/A/ScriptingBridge
0x7fff934ac000 - 0x7fff934adfff libunc.dylib (28) <62682455-1862-36FE-8A04-7A6B91256438> /usr/lib/system/libunc.dylib
0x7fff934ae000 - 0x7fff934b0ff3 libsystem_configuration.dylib (596.13) <B51C8C22-C455-36AC-952D-A319B6545884> /usr/lib/system/libsystem_configuration.dylib
0x7fff934b1000 - 0x7fff93504fff com.apple.ScalableUserInterface (1.0 - 1) <CF745298-7373-38D2-B3B1-727D5A569E48> /System/Library/Frameworks/QuartzCore.framework/Versions/A/Frameworks/ScalableU serInterface.framework/Versions/A/ScalableUserInterface
0x7fff93505000 - 0x7fff93508ff7 libdyld.dylib (239.4) <CF03004F-58E4-3BB6-B3FD-BE4E05F128A0> /usr/lib/system/libdyld.dylib
0x7fff93509000 - 0x7fff9350cffa libCGXType.A.dylib (599.20.11) <C0B41DDE-0988-3652-B03B-9E5EB0DABAEB> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCGXTy pe.A.dylib
0x7fff9350d000 - 0x7fff93753fff com.apple.AddressBook.framework (8.0 - 1369) <3D1A8D58-6A9E-366C-BDB8-ECC6F279DB24> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
0x7fff93754000 - 0x7fff93756fff com.apple.marco (10.0 - 1000) <FC7EF8C7-5EDF-3720-BAEC-281F12A7A3F8> /System/Library/PrivateFrameworks/Marco.framework/Versions/A/Marco
0x7fff93757000 - 0x7fff937a2fff com.apple.ImageCaptureCore (5.0 - 5.0) <F529EDDC-E2F5-30CA-9938-AF23296B5C5B> /System/Library/Frameworks/ImageCaptureCore.framework/Versions/A/ImageCaptureCo re
0x7fff937a3000 - 0x7fff937b7fff com.apple.aps.framework (4.0 - 4.0) <23BC5746-0914-3102-B84F-BEAB31A77AEC> /System/Library/PrivateFrameworks/ApplePushService.framework/Versions/A/ApplePu shService
0x7fff937b8000 - 0x7fff937bbfff libCoreVMClient.dylib (58.1) <EBC36C69-C896-3C3D-8589-3E9023E7E56F> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClien t.dylib
0x7fff939d3000 - 0x7fff93a9cfff com.apple.LaunchServices (572.26 - 572.26) <EF8A4A15-0861-35C5-9744-5E1BC5C26DD9> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x7fff93aa0000 - 0x7fff93d01fff com.apple.imageKit (2.5 - 774) <AACDE16E-ED9F-3B3F-A792-69BA1942753B> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/ImageKit.fram ework/Versions/A/ImageKit
0x7fff93d02000 - 0x7fff93d54fff libc++.1.dylib (120) <4F68DFC5-2077-39A8-A449-CAC5FDEE7BDE> /usr/lib/libc++.1.dylib
0x7fff93d7c000 - 0x7fff93dd4ff7 com.apple.Symbolication (1.4 - 129) <16D42516-7B5E-357C-898A-FAA9EE7642B3> /System/Library/PrivateFrameworks/Symbolication.framework/Versions/A/Symbolicat ion
0x7fff93dd5000 - 0x7fff93dddff7 com.apple.AppleSRP (5.0 - 1) <ABC7F088-1FD5-3768-B9F3-847F355E90B3> /System/Library/PrivateFrameworks/AppleSRP.framework/Versions/A/AppleSRP
0x7fff93dde000 - 0x7fff93ddeffd libOpenScriptingUtil.dylib (157) <19F0E769-0989-3062-9AFB-8976E90E9759> /usr/lib/libOpenScriptingUtil.dylib
0x7fff93ddf000 - 0x7fff93deeff8 com.apple.LangAnalysis (1.7.0 - 1.7.0) <8FE131B6-1180-3892-98F5-C9C9B79072D4> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x7fff93def000 - 0x7fff93df0ff7 libDiagnosticMessagesClient.dylib (100) <4CDB0F7B-C0AF-3424-BC39-495696F0DB1E> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff93df3000 - 0x7fff94c41fff com.apple.WebCore (9537 - 9537.74.11) <9683BA7C-A04B-3E33-B195-DCF1C2CABF95> /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
0x7fff94c42000 - 0x7fff94c43ffb libremovefile.dylib (33) <3543F917-928E-3DB2-A2F4-7AB73B4970EF> /usr/lib/system/libremovefile.dylib
0x7fff94c44000 - 0x7fff94c5fff7 libsystem_malloc.dylib (23.10.1) <A695B4E4-38E9-332E-A772-29D31E3F1385> /usr/lib/system/libsystem_malloc.dylib
0x7fff94e91000 - 0x7fff94f7ffff libJP2.dylib (1042) <01D988D4-E36F-3120-8BA4-EF6282ECB010> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libJP2.dylib
0x7fff94f80000 - 0x7fff94f86fff com.apple.AddressBook.ContactsFoundation (8.0 - 1369) <A5D1D494-2F84-3A97-A229-04DB308D4481> /System/Library/PrivateFrameworks/ContactsFoundation.framework/Versions/A/Conta ctsFoundation
0x7fff95036000 - 0x7fff95165fef com.apple.MediaControlSender (2.0 - 200.34.4) <FC24EC8D-2E46-3F76-AF63-749F30857B96> /System/Library/PrivateFrameworks/MediaControlSender.framework/Versions/A/Media ControlSender
0x7fff95166000 - 0x7fff95201fff com.apple.PDFKit (2.9.1 - 2.9.1) <F4DFF4F2-6DA3-3B1B-823E-D9ED271A1522> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/PDFKit.framew ork/Versions/A/PDFKit
0x7fff95202000 - 0x7fff95202fff com.apple.Carbon (154 - 157) <45A9A40A-78FF-3EA0-8FAB-A4F81052FA55> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x7fff95249000 - 0x7fff95249ffd com.apple.audio.units.AudioUnit (1.10 - 1.10) <486A97CD-C1F7-324D-87BC-B07F7A415B68> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x7fff9524a000 - 0x7fff9576dfff com.apple.QuartzComposer (5.1 - 319) <8B90921F-911B-3240-A1D5-3C084F3E6A36> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework/Versions/A/QuartzComposer
0x7fff9576e000 - 0x7fff95926ff3 libicucore.A.dylib (511.31) <167DDD0A-A935-31AF-B5B9-940268EC3A3C> /usr/lib/libicucore.A.dylib
0x7fff95930000 - 0x7fff95942fff com.apple.ImageCapture (9.0 - 9.0) <BE0B65DA-3031-359B-8BBA-B9803D4ADBF4> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x7fff95943000 - 0x7fff9596bffb libRIP.A.dylib (599.20.11) <D79461A6-2E24-3531-ADA2-EAC972384A7D> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/Resources/libRIP.A .dylib
0x7fff959e5000 - 0x7fff959e5fff com.apple.Accelerate.vecLib (3.9 - vecLib 3.9) <F8D0CC77-98AC-3B58-9FE6-0C25421827B6> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x7fff959e6000 - 0x7fff95d7efff com.apple.SceneKit (4.0 - 197.1) <D864946D-B843-3B7A-8C81-B682B06CF7FD> /System/Library/Frameworks/SceneKit.framework/Versions/A/SceneKit
0x7fff95d91000 - 0x7fff95e78ff7 libxml2.2.dylib (26) <A1DADD11-89E5-3DE4-8802-07186225967F> /usr/lib/libxml2.2.dylib
0x7fff95e79000 - 0x7fff95e7aff7 com.apple.print.framework.Print (9.0 - 260) <EE00FAE1-DA03-3EC2-8571-562518C46994> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x7fff95e7b000 - 0x7fff96125ff5 com.apple.HIToolbox (2.1 - 697.4) <DF5635DD-C255-3A8E-8B49-F6D2FB61FF95> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x7fff96126000 - 0x7fff96165fff libGLU.dylib (9.6) <EE4907CA-219C-34BD-A84E-B85695F64C05> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x7fff96166000 - 0x7fff961c9ff7 com.apple.SystemConfiguration (1.13 - 1.13) <63B985ED-E7E4-3095-8D12-63C9F1DB0F3D> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff961ca000 - 0x7fff961e2ff7 com.apple.GenerationalStorage (2.0 - 160.2) <79629AC7-896F-3302-8AC1-4939020F08C3> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
0x7fff961e3000 - 0x7fff9624dff7 com.apple.framework.IOKit (2.0.1 - 907.90.2) <A779DE46-BB7E-36FD-9348-694F9B09718F> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x7fff96253000 - 0x7fff96284ff7 libTrueTypeScaler.dylib (111.1) <697E72D0-8D79-3BB7-8AF5-46875AC9A4BC> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libTrueTypeScaler.dylib
0x7fff96285000 - 0x7fff962dcfff com.apple.ViewBridge (1.0 - 46.2) <4AF3CB98-7691-39A2-8DC3-ABE5CC55CE7F> /System/Library/PrivateFrameworks/ViewBridge.framework/Versions/A/ViewBridge
0x7fff96c03000 - 0x7fff96c32ff7 com.apple.CoreAVCHD (5.7.0 - 5700.4.3) <404369C0-ED9F-3010-8D2F-BC55285F7808> /System/Library/PrivateFrameworks/CoreAVCHD.framework/Versions/A/CoreAVCHD
0x7fff96c38000 - 0x7fff96c5fffb libsystem_info.dylib (449.1.3) <7D41A156-D285-3849-A2C3-C04ADE797D98> /usr/lib/system/libsystem_info.dylib
0x7fff96c60000 - 0x7fff96c63fff com.apple.AppleSystemInfo (3.0 - 3.0) <61FE171D-3D88-313F-A832-280AEC8F4AB7> /System/Library/PrivateFrameworks/AppleSystemInfo.framework/Versions/A/AppleSys temInfo
0x7fff96c64000 - 0x7fff971d4fff com.apple.CoreAUC (6.22.08 - 6.22.08) <F306D552-2220-3160-88EA-C916193C5EFD> /System/Library/PrivateFrameworks/CoreAUC.framework/Versions/A/CoreAUC
0x7fff971d5000 - 0x7fff971deffb com.apple.CommonAuth (4.0 - 2.0) <70FDDA03-7B44-37EC-B78E-3EC3C8505C76> /System/Library/PrivateFrameworks/CommonAuth.framework/Versions/A/CommonAuth
0x7fff971df000 - 0x7fff97427ff7 com.apple.CoreData (107 - 481.01) <DA339795-5D97-35B5-9B04-629830013720> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x7fff97428000 - 0x7fff97685ffd com.apple.RawCamera.bundle (5.03 - 731) <99C18399-B160-3C4A-AEDC-A2FD4944FCC6> /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
0x7fff97686000 - 0x7fff97757ff1 com.apple.DiskImagesFramework (10.9 - 371.1) <D456ED08-4C1D-341F-BAB8-85E34A7275C5> /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
0x7fff97758000 - 0x7fff9776aff7 com.apple.MultitouchSupport.framework (245.13 - 245.13) <D5E7416D-45AB-3690-86C6-CC4B5FCEA2D2> /System/Library/PrivateFrameworks/MultitouchSupport.framework/Versions/A/Multit ouchSupport
0x7fff9776b000 - 0x7fff97778ff0 libbz2.1.0.dylib (29) <0B98AC35-B138-349C-8063-2B987A75D24C> /usr/lib/libbz2.1.0.dylib
0x7fff97779000 - 0x7fff977f0fff com.apple.CoreServices.OSServices (600.4 - 600.4) <36B2B009-C35E-3F21-824E-E0D00E7808C7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x7fff977f1000 - 0x7fff978e2ff9 libiconv.2.dylib (41) <BB44B115-AC32-3877-A0ED-AEC6232A4563> /usr/lib/libiconv.2.dylib
0x7fff978e3000 - -
Recently, my Apple Mail has been sending from two to six copies of email, timed to the same minute. I've taken to using Thunderbied (which I don't prefer) to avoid it. My theory is that if I can reload Lion it might cure it, but since Lion only comes as a download, I don't know how.
I've had MacKeeper in place since before the problem, but updating it became impossible. I emailed that program and was advised to trash it, do a cold reboot and then download it again. I did, and it hasn't helped.
Any suggestions?MacKeeper is so bad, it has earnt the distinction of a User Tip of it's own
https://discussions.apple.com/docs/DOC-3036
After dragging the app to the trash, you will need to clean up using something like AppTrap, AppZapper, AppCleaner etc. The official MacKeeper uninistaller leaves advert popups still appearing on your computer.
http://freemacsoft.net/appcleaner/ -
Comment faire quand on a oublié ses questions de sécurité et que l'on ne reçoit pas le mail?
Bonjour
J'essaie de faire un achat et itune me demande mes réponses de sécurités. je ne me souviens plus de celles ci. j'ai demandé que l'on m'envoie les réponses par mail. mais je n'ai rien reçu. et je ne peux pas vérifier si c'est la bonne adresse email car celle ci ne s'affiche pas.
merci de m'aider si vous le savez.uninstall your lr 5.
then download and install lr 5.7.1,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Last year I updated my IMac system to OSX 10.9.1. Ever since whenever I type an email message it is saved multiple times (sometimes dozens, if the message is long) in multiple places (Saved, Trash, etc.) Any cure for this annoying (and growing) problem? Thanks.
You have Sophos installed, which is certainly capable of causing panics. However, the panic logged above happened in safe mode, and wasn't caused by any third-party software. That type of panic is usually caused by a memory fault.
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications for the model.
Apple Diagnostics or the Apple Hardware Test, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test, if applicable. -
Aidez moi, je ne reçois pas l'émail, alors que je suis sur la bonne adresse email. Je ne peux effectuer aucun achat sur le store je suis totalement bloquer. Alors même si j'essaye plusieurs fois de retrouver les réponses à mes questions peut être que l'orthographe n'est pas la bonne. Je n'en sais rien. Comment je peux faire ?
Desolé c'est en Anglais; asseyez encore.
If you can't remember your security questions go to Express Lane.
select iTunes from the list, then iTunes store. On the next screen select account Management. There, select iTunes store account security and write that you would like to reset your security questions and / or answers.
You should get an eMail reply over the next 24 hours. -
How can I remove my wife's email address and password from my app store account? I am trying to update apps and it won't let me use my info. My wife has an iPad and an account, some way the info got on mymipad.
You can log out out of the currently logged in account on the iPad by tapping on the id in Settings > Store and you can then log in with your account - but if any of your wife's apps are on your iPad then only her account will be able to download updates to those apps as they will be tied to her account.
-
POP email account spins forever, never retrieves mail - how to cure?
I've made no changes to my OS Lion mail settings, but suddenly (yesterday) my main POP account just spins forever and never retrieves mail nor gives an error. Also now sometimes I have to force quit the client because mail never completely quits the normal way. I've installed all the OS updates, and my iphone and ipad can retrieve the mail from that account with the same settings just fine.
Help?This has just started for me in exactly the same way after I updated my wifes comp to 10.7.5. The iphones and ipads all send and retrieve mail with the same settings with no problems at all.
Did you finally solve this problem? -
Dynamic CRM 2013 Online how to execute Report, generate PDF and email
Dear All,
I am using Dynamic CRM 2013 online. For quote, I have workflow and Dialogue processes for review process. On approval, I want the system to generate a PDF of quote report, attach the PDF and email it to the Customer.
Better I would like, When approver, clicks on the approve button, the system should auto generate a PDF of quote report, attach the PDF and email it to the Customer, without any further input from the user. If its not possible, I may have to put button on
quote form.
I am using the attached code, but facing various issues.
1. Under prepare the SOAP Message coding part, I am not sure what should be the below URL for CRM 2013 Online?
xHReq.Open("POST", "/mscrmservices/2007/CrmService.asmx", false);
2. What should be the emailid here? Is it Recepient Contact id(Guid) ?
var emailid = resultXml.selectSingleNode("//CreateResult").nodeTypedValue;
alert("emailid" + emailid.toString());
3. Using this code, not able to create Entity for "ActivityMimeAttachment", I am getting newEntity as undefined.
Below is the code I am using. Please check and help me out, where I am going wrong. Let me know if any better way to implement it. At present, I have put one button on quote form, on click event, below code will get executed.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script type="text/javascript">
var Xrm;
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
function getReportingSession() {
var reportName = "Quotation_Report"; //set this to the report you are trying to download
var reportId = "7C39D18F-1DC6-E311-8986-D89D6765B238"; //set this to the guid of the report you are trying to download
var recordid = Xrm.Page.data.entity.getId();
// recordid = recordid.substring(1, 37); //getting rid of curly brackets
alert(recordid);
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
retrieveEntityReq.send("id=%7B" + reportId + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName=" + reportName + "&isScheduledReport=false");
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
function createEntity(ent, entName, upd) {
var jsonEntity = JSON.stringify(ent);
var createEntityReq = new XMLHttpRequest();
var ODataPath = Xrm.Page.context.getServerUrl() + "XRMServices/2011/OrganizationData.svc";
createEntityReq.open("POST", ODataPath + "/" + entName + "Set" + upd, false);
createEntityReq.setRequestHeader("Accept", "application/json");
createEntityReq.setRequestHeader("Content-Type", "application/json; charset=utf-8");
createEntityReq.send(jsonEntity);
var newEntity = JSON.parse(createEntityReq.responseText).d;
alert("new entity" + newEntity);
return newEntity;
function createAttachment() {
var params = getReportingSession();
var recordid = Xrm.Page.data.entity.getId();
alert("recordid " + recordid);
var orgName = Xrm.Page.context.getOrgUniqueName();
var userID = Xrm.Page.context.getUserId();
//create email record
// Prepare the SOAP message.
var xml = "<?xml version='1.0' encoding='utf-8'?>" +"<soap:Envelope xmlns:soap='http://schemas.xmlsoap.org/soap/envelope/'" +
" xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'" +
" xmlns:xsd='http://www.w3.org/2001/XMLSchema'>" +
"<soap:Header>" +
"</soap:Header>" +
"<soap:Body>" +
"<Create xmlns='http://schemas.microsoft.com/crm/2007/WebServices'>" +
"<entity xsi:type='email'>" +
"<regardingobjectid type='quote'>" + recordid + "</regardingobjectid>" +
"<subject>" + "Email with Attachment4" + "</subject>" +
"</entity>" +
"</Create>" +
"</soap:Body>" +
"</soap:Envelope>";
// Prepare the xmlHttpObject and send the request.
var xHReq = new ActiveXObject("Msxml2.XMLHTTP");
xHReq.Open("POST", "/mscrmservices/2007/CrmService.asmx", false);
xHReq.setRequestHeader("SOAPAction", "http://schemas.microsoft.com/crm/2007/WebServices/Create");
xHReq.setRequestHeader("Content-Type", "text/xml; charset=utf-8");
xHReq.setRequestHeader("Content-Length", xml.length);
xHReq.send(xml);
// Capture the result
var resultXml = xHReq.responseXML;
// alert("resultXml " + resultXml);
// Check for errors.
var errorCount = resultXml.selectNodes('//error').length;
if (errorCount != 0) {
alert("ERROR");
var msg = resultXml.selectSingleNode('//description').nodeTypedValue;
alert(msg);
var emailid = resultXml.selectSingleNode("//CreateResult").nodeTypedValue;
alert("emailid" + emailid.toString());
//var emailid = userID;
var post = Object();
post.Body = encodePdf(params);
var email = new Array();
email[0] =new Object();
email[0].id = emailid;
email[0].entityType ='email';
post.Subject ="File Attachment";
post.AttachmentNumber = 1;
post.FileName ="Report.pdf";
post.MimeType ="application/pdf";
post.ObjectId = Object();
post.ObjectId.LogicalName ="email";
post.ObjectId.Id = email[0].id;
post.ObjectTypeCode ="email";
alert(post.ObjectId.Id);
createEntity(post,"ActivityMimeAttachment", "");
alert("created successfully");
email.Subject = "Your Order";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: customerId, // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerId, // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity). activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] + "&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] + "&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
</SCRIPT>
<SCRIPT type=text/vbscript>
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</SCRIPT>
</head>
<body>
<input type="button" onclick="createAttachment();" value="Attach Report" />
</body>
</html>
Thanks. and waiting for your valuable comments.
- MittalHello,
Yes, I was able to make my code working as below. Tested on CRM online 2013.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script>
<script type="text/javascript">
if (typeof (SDK) == "undefined")
{ SDK = { __namespace: true }; }
SDK.JScriptRESTDataOperations = {
_context: function () {
if (typeof GetGlobalContext != "undefined")
{ return GetGlobalContext(); }
else {
if (typeof Xrm != "undefined") {
return Xrm.Page.context;
else { return new Error("Context is not available."); }
_getServerUrl: function () {
var serverUrl = this._context().getServerUrl()
if (serverUrl.match(/\/$/)) {
serverUrl = serverUrl.substring(0, serverUrl.length - 1);
return serverUrl;
_ODataPath: function () {
return this._getServerUrl() + "/XRMServices/2011/OrganizationData.svc/";
_errorHandler: function (req) {
return new Error("Error : " +
req.status + ": " +
req.statusText + ": " +
JSON.parse(req.responseText).error.message.value);
_dateReviver: function (key, value) {
var a;
if (typeof value === 'string') {
a = /Date\(([-+]?\d+)\)/.exec(value);
if (a) {
return new Date(parseInt(value.replace("/Date(", "").replace(")/", ""), 10));
return value;
Create: function (object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 201) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Retrieve: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
Update: function (id, object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "MERGE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Delete: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "DELETE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
RetrieveMultiple: function (type, filter, successCallback, errorCallback) {
if (filter != null) {
filter = "?" + filter;
else { filter = ""; }
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set" + filter, true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d.results);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
__namespace: true
</script>
<script type="text/javascript">
//Create Email and link it with Order as Regarding field
var Xrm;
var email = new Object();
var ownerID = "";
var CustomerId = "";
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
//Get ownerid who send email of quotation to customer
function GetOwnerID() {
var owner = Xrm.Page.getAttribute("ownerid").getValue();
ownerID = owner[0].id;
var ownerName = owner[0].name;
var entityType = owner[0].entityType;
GetToEmailGUID();
//Get customerid who receive email of quotation from owner
function GetToEmailGUID() {
var Customer = Xrm.Page.getAttribute('customerid').getValue();
CustomerId = Customer[0].id;
var CustomerName = Customer[0].name;
var entityType = Customer[0].entityType;
//if CustomerId is type of "Account" then get Primary Contact id of that account
if (entityType == "account") {
var contact = Xrm.Page.getAttribute("customerid").getValue();
if (contact === null) return;
var serverUrl = Xrm.Page.context.getClientUrl();
var oDataSelect = serverUrl + "/XRMServices/2011/OrganizationData.svc/AccountSet(guid'" + contact[0].id + "')?$select=PrimaryContactId";
var req = new XMLHttpRequest();
req.open("GET", oDataSelect, false);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json;charset=utf-8");
req.onreadystatechange = function () {
if (req.readyState === 4) {
if (req.status === 200) {
var retrieved = JSON.parse(req.responseText).d;
CustomerId = retrieved.PrimaryContactId.Id;
else {
alert(this.statusText);
req.send();
function CreateEmail() {
GetOwnerID();
email.Subject = "Email with Report Attachment";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: CustomerId, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerID, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
GetReportId('Quotation');
//Create attachment for the created email
function CreateEmailAttachment() {
//get reporting session and use the params to convert a report in PDF
var params = getReportingSession();
//Email attachment parameters
var activitymimeattachment = Object();
activitymimeattachment.ObjectId = Object();
activitymimeattachment.ObjectId.LogicalName = "email";
activitymimeattachment.ObjectId.Id = email.ActivityId;
activitymimeattachment.ObjectTypeCode = "email",
activitymimeattachment.Subject = "File Attachment";
activitymimeattachment.Body = encodePdf(params);
activitymimeattachment.FileName = "Report.pdf";
activitymimeattachment.MimeType = "application/pdf";
//Attachment call
SDK.JScriptRESTDataOperations.Create(activitymimeattachment, "ActivityMimeAttachment", ActivityMimeAttachmentCallBack, function (error) { alert(error.message); });
//ActivityMimeAttachment CallBack function
function ActivityMimeAttachmentCallBack(result) {
var features = "location=no,menubar=no,status=no,toolbar=no,resizable=yes";
var width = "800px";
var height = "600px";
window.open(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", features);
// To open window which works in outlook and IE both
//openStdWin(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", width, height, features);
//This method will get the reportId based on a report name that will be used in getReportingSession() function
function GetReportId(reportName) {
var oDataSetName = "ReportSet";
var columns = "ReportId";
var filter = "Name eq '" + reportName + "'";
retrieveMultiple(oDataSetName, columns, filter, onSuccess);
function retrieveMultiple(odataSetName, select, filter, successCallback) {
var serverUrl = Xrm.Page.context.getServerUrl();
var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
var odataUri = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "?";
if (select) {
odataUri += "$select=" + select + "&";
if (filter) {
odataUri += "$filter=" + filter;
$.ajax({
type: "GET",
contentType: "application/json; charset=utf-8",
datatype: "json",
url: odataUri,
beforeSend: function (XMLHttpRequest) {
XMLHttpRequest.setRequestHeader("Accept", "application/json");
success: function (data) {
if (successCallback) {
if (data && data.d && data.d.results) {
successCallback(data.d.results);
else if (data && data.d) {
successCallback(data.d);
else {
successCallback(data);
error: function (XmlHttpRequest, errorThrown) {
if (XmlHttpRequest && XmlHttpRequest.responseText) {
alert("Error while retrieval ; Error – " + XmlHttpRequest.responseText);
function onSuccess(data) {
reportId = data[0].ReportId.replace('{', ").replace('}', ");
CreateEmailAttachment(); // Create Email Attachment
//Gets the report contents
function getReportingSession() {
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
var Id = Xrm.Page.data.entity.getId();
var quotationGUID = Id.replace('{', ""); //set this to selected quotation GUID
quotationGUID = quotationGUID.replace('}', "");
var reportName = "Quotation"; //set this to the report you are trying to download
var reportID = "7C39D18F-1DC6-E311-8986-D89D6765B238"; //set this to the guid of the report you are trying to download
var rptPathString = ""; //set this to the CRMF_Filtered parameter
var strParameterXML = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'><entity name='quote'><all-attributes /><filter type='and'><condition attribute='quoteid' operator='eq' uitype='quote' value='" + quotationGUID + "' /> </filter></entity></fetch>";
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
rptPathString = "id=%7B" + reportID + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName=" +
reportName + "&isScheduledReport=false&p:CRMAF_Filteredquote=" + strParameterXML;
//remove the part starting from &p:salesorderid if your report has no parameters
retrieveEntityReq.send(rptPathString);
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] +
"&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] +
"&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
} else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
</script>
<script type="text/vbscript">
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</script>
</head>
<body>
<input type="button" onclick="CreateEmail();" value="Attach Report" />
</body>
</html>
Thank you,
Mittal. -
Unable to receive email consistently from AOL
Trying to track down a MAJOR problem, I have a client that I support that runs 10.6 server and it is the mail server etc.. What is occuring is that AOL cannot consistently deliver email to our server... I get various types of messages in mail.log (paste below).. usually Timeout after CONNECT but sometimes Timeout after EHLO.... I have disabled greylisting and increased the default_process_limit to 400 in main.cf
My client is getting VERY angry because a big client of theirs insists on using AOL because that's all he knows.. We are NOT having any issues receiving mail from anyone except AOL.com I have (ugh) created a free AOL.com account and attempted to send messages, getting the same things. Once in awhile they do get through but mostly I get the below.
Appreciate ANY insight...
Log stuffs:
lost connection after EHLO from
Jun 13 09:01:14 xserve postfix/smtpd[25821]: connect from imr-ma06.mx.aol.com[64.12.78.142]
Jun 13 09:01:14 xserve postfix/smtpd[25821]: lost connection after CONNECT from imr-ma06.mx.aol.com[64.12.78.142]
Jun 13 09:01:14 xserve postfix/smtpd[25821]: disconnect from imr-ma06.mx.aol.com[64.12.78.142]
Jun 13 09:29:26 xserve postfix/smtpd[27387]: connect from imr-da04.mx.aol.com[205.188.105.146]
Jun 13 09:29:26 xserve postfix/smtpd[27387]: lost connection after CONNECT from imr-da04.mx.aol.com[205.188.105.146]
Jun 13 09:29:26 xserve postfix/smtpd[27387]: disconnect from imr-da04.mx.aol.com[205.188.105.146]
Jun 13 09:33:56 xserve postfix/smtpd[27416]: connect from imr-mb02.mx.aol.com[64.12.207.163]
Jun 13 09:33:56 xserve postfix/smtpd[27416]: lost connection after CONNECT from imr-mb02.mx.aol.com[64.12.207.163]
Jun 13 09:33:56 xserve postfix/smtpd[27416]: disconnect from imr-mb02.mx.aol.com[64.12.207.163]
Jun 13 09:41:46 xserve postfix/smtpd[27817]: connect from imr-ma04.mx.aol.com[64.12.206.42]
Jun 13 09:41:46 xserve postfix/smtpd[27817]: lost connection after EHLO from imr-ma04.mx.aol.com[64.12.206.42]
Jun 13 09:41:46 xserve postfix/smtpd[27817]: disconnect from imr-ma04.mx.aol.com[64.12.206.42]
Postfix config file follows:
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
# For common configuration examples, see BASIC_CONFIGURATION_README
# and STANDARD_CONFIGURATION_README. To find these documents, use
# the command "postconf html_directory readme_directory", or go to
# http://www.postfix.org/.
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /private/var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/libexec/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = _postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
# Note: you need to stop/start Postfix when this parameter changes.
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#mydestination = $myhostname, localhost.$mydomain, localhost
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
# mail.$mydomain, www.$mydomain, ftp.$mydomain
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
# - You define $mydestination domain recipients in files other than
# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
# For example, you define $mydestination domain recipients in
# the $virtual_mailbox_maps files.
# - You redefine the local delivery agent in master.cf.
# - You redefine the "local_transport" setting in main.cf.
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
# feature of the Postfix local delivery agent (see local(8)).
# Details are described in the LOCAL_RECIPIENT_README file.
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a [email protected] address.
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =
# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
unknown_local_recipient_reject_code = 550
# TRUST AND RELAY CONTROL
# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in postconf(5).
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
# subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#relay_domains = $mydestination
# INTERNET OR INTRANET
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
# If you're connected via UUCP, see also the default_transport parameter.
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]
# REJECTING UNKNOWN RELAY USERS
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a [email protected] address.
#relay_recipient_maps = hash:/etc/postfix/relay_recipients
# INPUT RATE CONTROL
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
# Specify 0 to disable the feature. Valid delays are 0..10.
#in_flow_delay = 1s
# ADDRESS REWRITING
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.
# "USER HAS MOVED" BOUNCE MESSAGES
# See the discussion in the ADDRESS_REWRITING_README document.
# TRANSPORT MAP
# See the discussion in the ADDRESS_REWRITING_README document.
# ALIAS DATABASE
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
# ADDRESS EXTENSIONS (e.g., user+foo)
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#recipient_delimiter = +
# DELIVERY TO MAILBOX
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
# "Maildir/" for qmail-style delivery (the / is required).
#home_mailbox = Mailbox
#home_mailbox = Maildir/
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail
# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"
# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus
# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =
# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown@$mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
# luser_relay works only for the default Postfix local delivery agent.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#luser_relay = [email protected]
#luser_relay = [email protected]
#luser_relay = admin+$local
# JUNK MAIL CONTROLS
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.
# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
# For details, see "man header_checks".
#header_checks = regexp:/etc/postfix/header_checks
# FAST ETRN SERVICE
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
#fast_flush_domains = $relay_domains
# SHOW SOFTWARE VERSION OR NOT
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
# PARALLEL DELIVERY TO THE SAME DESTINATION
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter. The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.
#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20
# DEBUGGING CONTROL
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
debug_peer_level = 2
# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain
# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
xxgdb $daemon_directory/$process_name $process_id & sleep 5
# If you can't use X, use this to capture the call stack when a
# daemon crashes. The result is in a file in the configuration
# directory, and is named after the process name and the process ID.
# debugger_command =
# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
# >$config_directory/$process_name.$process_id.log & sleep 5
# Another possibility is to run gdb under a detached screen session.
# To attach to the screen sesssion, su root and run "screen -r
# <id_string>" where <id_string> uniquely matches one of the detached
# sessions (from "screen -list").
# debugger_command =
# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
# -dmS $process_name gdb $daemon_directory/$process_name
# $process_id & sleep 1
# INSTALL-TIME CONFIGURATION INFORMATION
# The following parameters are used when installing a new Postfix version.
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
sendmail_path = /usr/sbin/sendmail
# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
newaliases_path = /usr/bin/newaliases
# mailq_path: The full pathname of the Postfix mailq command. This
# is the Sendmail-compatible mail queue listing command.
mailq_path = /usr/bin/mailq
# setgid_group: The group for mail submission and queue management
# commands. This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
setgid_group = _postdrop
# html_directory: The location of the Postfix HTML documentation.
html_directory = no
# manpage_directory: The location of the Postfix on-line manual pages.
manpage_directory = /usr/share/man
# sample_directory: The location of the Postfix sample configuration files.
# This parameter is obsolete as of Postfix 2.1.
sample_directory = /usr/share/doc/postfix/examples
# readme_directory: The location of the Postfix README files.
readme_directory = /usr/share/doc/postfix
mydomain_fallback = localhost
message_size_limit = 20971520
myhostname = mail.gretemangroup.com
mailbox_transport = dovecot
mailbox_size_limit = 0
enable_server_options = yes
inet_interfaces = all
mynetworks = 127.0.0.0/8,192.168.111.0/24,65.175.107.129,216.198.218.183,67.227.192.77
mydomain = gretemangroup.com
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org reject_rbl_client bl.spamcop.net permit
maps_rbl_domains =
content_filter = smtp-amavis:[127.0.0.1]:10024
owner_request_special = no
recipient_delimiter = +
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
smtpd_use_tls = yes
smtpd_enforce_tls = no
smtpd_tls_cert_file = /etc/certificates/mail.BEFAEE692989865720B94CAF24F6BCADC7780636.cert.pem
smtpd_tls_key_file = /etc/certificates/mail.BEFAEE692989865720B94CAF24F6BCADC7780636.key.pem
smtpd_sasl_auth_enable = yes
smtpd_use_pw_server = yes
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination permit
smtpd_pw_server_security_options = login,cram-md5
mydestination = $myhostname, localhost.$mydomain, gretemangroup.com, mail.gretemangroup.com, $mydomain
virtual_alias_maps = $virtual_maps
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname
header_checks = pcre:/etc/postfix/custom_header_checks
smtpd_tls_CAfile = /etc/certificates/mail.BEFAEE692989865720B94CAF24F6BCADC7780636.chain.pem
nested_header_checks = $header_checks
smtp_connection_cache_time_limit = 2s
lmtp_rcpt_timeout = 300s
tls_export_cipherlist = ALL:+RC4:@STRENGTH
smtp_sasl_auth_cache_name =
check_for_od_forward = yes
default_verp_delimiters = +=
showq_service_name = showq
smtp_enforce_tls = no
milter_macro_daemon_name = $myhostname
smtpd_tls_security_level =
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
smtpd_tls_mandatory_exclude_ciphers =
milter_connect_timeout = 30s
local_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
default_delivery_slot_loan = 3
smtp_destination_recipient_limit = $default_destination_recipient_limit
default_transport = smtp
lmtp_defer_if_no_mx_address_found = no
lmtp_pix_workaround_maps =
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
lmtp_tls_enforce_peername = yes
lmtp_tls_fingerprint_digest = md5
flush_service_name = flush
non_fqdn_reject_code = 504
smtpd_tls_req_ccert = no
lmtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
ipc_idle = 5s
smtp_discard_ehlo_keyword_address_maps =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $sender_bcc_maps $recipient_bcc_maps $smtp_generic_maps $lmtp_generic_maps
address_verify_map =
lmtp_tls_key_file = $lmtp_tls_cert_file
connection_cache_status_update_time = 600s
always_bcc =
smtpd_starttls_timeout = 300s
berkeley_db_create_buffer_size = 16777216
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
smtpd_client_port_logging = no
myorigin = $myhostname
smtp_tls_per_site =
default_recipient_refill_delay = 5s
lmtp_pix_workaround_delay_time = 10s
lmtp_sasl_type = cyrus
deliver_lock_delay = 1s
lmtp_tls_loglevel = 0
local_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
lmtp_send_xforward_command = no
smtp_tls_secure_cert_match = nexthop, dot-nexthop
undisclosed_recipients_header = To: undisclosed-recipients:;
dont_remove = 0
sender_canonical_maps =
smtpd_policy_service_max_idle = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_null_access_lookup_key = <>
bounce_size_limit = 50000
tls_random_exchange_name = ${data_directory}/prng_exch
milter_connect_macros = j {daemon_name} v
smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
virtual_initial_destination_concurrency = $initial_destination_concurrency
smtp_sasl_mechanism_filter =
alias_database = hash:/etc/aliases
smtp_sasl_auth_soft_bounce = yes
fallback_transport_maps =
reject_code = 554
cleanup_service_name = cleanup
lmtp_tls_session_cache_database =
unverified_recipient_reject_code = 450
lmtp_lhlo_name = $myhostname
qmgr_message_recipient_minimum = 10
relayhost =
smtpd_banner = $myhostname ESMTP $mail_name
virtual_alias_domains = $virtual_alias_maps
mail_release_date = 20080902
lmtp_mail_timeout = 300s
lmtp_pix_workaround_threshold_time = 500s
tls_high_cipherlist = ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH
transport_maps =
smtp_bind_address6 =
resolve_numeric_domain = no
default_recipient_refill_limit = 100
tls_daemon_random_bytes = 32
smtp_rset_timeout = 20s
smtpd_discard_ehlo_keywords =
smtp_sasl_type = cyrus
cyrus_sasl_config_path =
qmqpd_timeout = 300s
anvil_rate_time_unit = 60s
smtpd_sasl_authenticated_header = no
virtual_mailbox_base =
virtual_uid_maps =
tls_low_cipherlist = ALL:!EXPORT:+RC4:@STRENGTH
relay_domains = $mydestination
relay_domains_reject_code = 554
address_verify_negative_cache = yes
lmtp_nested_header_checks =
tls_random_prng_update_period = 3600s
smtp_pix_workaround_threshold_time = 500s
relay_clientcerts =
smtp_tls_dcert_file =
smtpd_authorized_xforward_hosts =
delay_notice_recipient = postmaster
lmtp_tls_dkey_file = $lmtp_tls_dcert_file
anvil_status_update_time = 600s
virtual_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
lmtp_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_tls_exclude_ciphers =
local_initial_destination_concurrency = $initial_destination_concurrency
smtp_connection_reuse_time_limit = 300s
duplicate_filter_limit = 1000
queue_file_attribute_count_limit = 100
mail_spool_directory = /var/mail
local_command_shell =
proxy_interfaces =
unknown_relay_recipient_reject_code = 550
address_verify_relay_transport = $relay_transport
smtp_generic_maps =
smtpd_policy_service_max_ttl = 1000s
virtual_gid_maps =
smtp_fallback_relay = $fallback_relay
relay_destination_recipient_limit = $default_destination_recipient_limit
local_header_rewrite_clients = permit_inet_interfaces
smtp_tls_note_starttls_offer = no
lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
bounce_notice_recipient = postmaster
default_destination_concurrency_negative_feedback = 1
authorized_mailq_users = static:anyone
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtp_helo_timeout = 300s
smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
tls_random_bytes = 32
local_destination_recipient_limit = 1
mail_name = Postfix
smtpd_discard_ehlo_keyword_address_maps =
mailbox_delivery_lock = flock, dotlock
sender_canonical_classes = envelope_sender, header_sender
debug_peer_list =
smtp_tls_mandatory_ciphers = medium
strict_mailbox_ownership = yes
lmtp_header_checks =
unknown_hostname_reject_code = 450
message_strip_characters =
smtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
lmtp_tls_CApath =
process_id_directory = pid
smtpd_client_connection_rate_limit = 0
smtpd_client_connection_count_limit = 50
address_verify_service_name = verify
non_smtpd_milters =
maximal_backoff_time = 4000s
transport_retry_time = 60s
qmgr_clog_warn_time = 300s
lmtp_tls_verify_cert_match = hostname
config_directory = /etc/postfix
smtpd_recipient_overshoot_limit = 1000
milter_unknown_command_macros =
hash_queue_depth = 1
address_verify_transport_maps = $transport_maps
defer_service_name = defer
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
tls_random_reseed_period = 3600s
luser_relay =
prepend_delivered_header = command, file, forward
qmqpd_error_delay = 1s
virtual_transport = virtual
smtpd_junk_command_limit = 100
line_length_limit = 2048
smtpd_sasl_path = smtpd
resolve_null_domain = no
smtpd_tls_ccert_verifydepth = 9
lmtp_body_checks =
smtp_tls_exclude_ciphers =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
lmtp_randomize_addresses = yes
virtual_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
queue_minfree = 0
milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
lmtp_tls_security_level =
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
bounce_template_file =
application_event_drain_time = 100s
smtp_send_xforward_command = no
virtual_minimum_uid = 100
lmtp_tls_cert_file =
lmtp_sasl_path =
smtp_use_tls = no
smtpd_noop_commands =
lmtp_host_lookup = dns
canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
daemon_timeout = 18000s
data_directory = /var/lib/postfix
address_verify_default_transport = $default_transport
lmtp_connection_cache_time_limit = 2s
smtp_tls_enforce_peername = yes
smtpd_soft_error_limit = 10
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
ipc_timeout = 3600s
recipient_canonical_classes = envelope_recipient, header_recipient
smtpd_sasl_type = cyrus
masquerade_exceptions =
proxy_write_maps = $smtp_sasl_auth_cache_name $lmtp_sasl_auth_cache_name
frozen_delivered_to = yes
relay_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
virus_db_last_update = 2010-02-11 01:05:44 -0600
lmtp_destination_recipient_limit = $default_destination_recipient_limit
spam_domain_name = gretemangroup.com
smtpd_tls_mandatory_protocols = SSLv3, TLSv1
smtp_quit_timeout = 300s
default_extra_recipient_limit = 1000
mime_header_checks = $header_checks
smtp_sasl_tls_security_options = $smtp_sasl_security_options
bounce_service_name = bounce
ipc_ttl = 1000s
address_verify_positive_refresh_time = 7d
lmtp_tcp_port = 24
lmtp_initial_destination_concurrency = $initial_destination_concurrency
pickup_service_name = pickup
receive_override_options =
smtp_tls_session_cache_database =
virtual_alias_expansion_limit = 1000
default_delivery_slot_discount = 50
fast_flush_domains = $relay_domains
relocated_maps =
smtp_tls_fingerprint_digest = md5
relay_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
smtpd_delay_open_until_valid_rcpt = yes
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_destination_rate_delay = $default_destination_rate_delay
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
smtp_line_length_limit = 990
header_size_limit = 102400
lmtp_connection_cache_on_demand = yes
tls_random_source = dev:/dev/urandom
smtp_sasl_path =
fallback_transport =
smtpd_history_flush_threshold = 100
backwards_bounce_logfile_compatibility = yes
smtpd_tls_mandatory_ciphers = medium
smtp_tls_CApath =
qmgr_message_recipient_limit = 20000
connection_cache_service_name = scache
relay_destination_concurrency_limit = $default_destination_concurrency_limit
in_flow_delay = 1s
milter_end_of_header_macros = i
smtp_initial_destination_concurrency = $initial_destination_concurrency
lmtp_tls_per_site =
smtpd_proxy_timeout = 100s
lmtp_discard_lhlo_keywords =
lmtp_tls_scert_verifydepth = 9
smtp_pix_workarounds = disable_esmtp,delay_dotcrlf
smtp_sasl_password_maps =
smtp_starttls_timeout = 300s
tls_null_cipherlist = eNULL:!aNULL
unverified_sender_reject_code = 450
lmtp_enforce_tls = no
hopcount_limit = 50
smtpd_forbidden_commands = CONNECT GET POST
message_reject_characters =
lmtp_sasl_auth_cache_time = 90d
unknown_address_reject_code = 450
smtp_tls_security_level =
mynetworks_style = subnet
lmtp_quote_rfc821_envelope = yes
lmtp_tls_note_starttls_offer = no
default_destination_concurrency_limit = 20
local_transport = local:$myhostname
permit_mx_backup_networks =
smtp_tls_policy_maps =
lmtp_mime_header_checks =
lmtp_line_length_limit = 990
lmtp_tls_mandatory_exclude_ciphers =
smtp_nested_header_checks =
lmtp_xforward_timeout = 300s
send_cyrus_sasl_authzid = no
smtp_xforward_timeout = 300s
lmtp_mx_session_limit = 2
address_verify_negative_expire_time = 3d
smtpd_client_message_rate_limit = 0
smtp_mx_session_limit = 2
header_address_token_limit = 10240
smtp_rcpt_timeout = 300s
smtpd_tls_dcert_file =
mime_nesting_limit = 100
lmtp_bind_address6 =
relay_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
connection_cache_protocol_timeout = 5s
error_service_name = error
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_rset_timeout = 20s
smtp_tls_session_cache_timeout = 3600s
notify_classes = resource, software
smtpd_timeout = 300s
virtual_mailbox_maps =
sender_bcc_maps =
execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
lmtp_tls_dcert_file =
default_recipient_limit = 20000
virtual_mailbox_lock = fcntl, dotlock
authorized_flush_users = static:anyone
lmtp_connection_reuse_time_limit = 300s
double_bounce_sender = double-bounce
relay_recipient_maps =
smtp_pix_workaround_maps =
maximal_queue_lifetime = 5d
smtpd_tls_always_issue_session_ids = yes
smtp_defer_if_no_mx_address_found = no
address_verify_sender = $double_bounce_sender
lmtp_mx_address_limit = 5
smtpd_tls_CApath =
stale_lock_time = 500s
smtpd_tls_dh1024_param_file =
trace_service_name = trace
default_destination_concurrency_positive_feedback = 1
smtp_mx_address_limit = 5
default_privs = nobody
deliver_lock_attempts = 20
lmtp_starttls_timeout = 300s
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
lmtp_cname_overrides_servername = no
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_data_xfer_timeout = 180s
smtpd_client_new_tls_session_rate_limit = 0
lmtp_sasl_auth_cache_name =
lmtp_tls_secure_cert_match = nexthop
smtp_tls_loglevel = 0
milter_end_of_data_macros = i
smtpd_reject_unlisted_recipient = yes
command_execution_directory =
authorized_submit_users = static:anyone
syslog_name = postfix
smtpd_end_of_data_restrictions =
lmtp_generic_maps =
default_minimum_delivery_slots = 3
smtp_helo_name = $myhostname
access_map_reject_code = 554
lmtp_sasl_mechanism_filter =
lmtp_sasl_auth_soft_bounce = yes
lmtp_sender_dependent_authentication = no
address_verify_relayhost = $relayhost
smtpd_tls_received_header = no
smtp_mime_header_checks =
lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
smtpd_tls_dh512_param_file =
rewrite_service_name = rewrite
mailbox_transport_maps =
error_notice_recipient = postmaster
milter_content_timeout = 300s
smtpd_error_sleep_time = 1s
destination_concurrency_feedback_debug = no
fault_injection_code = 0
internal_mail_filter_classes =
smtpd_peername_lookup = yes
lmtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
propagate_unmatched_extensions = canonical, virtual
unknown_virtual_mailbox_reject_code = 550
smtp_mail_timeout = 300s
smtpd_authorized_xclient_hosts =
address_verify_positive_expire_time = 31d
delay_logging_resolution_limit = 2
qmgr_fudge_factor = 100
lmtp_data_xfer_timeout = 180s
max_use = 100
milter_data_macros = i
maps_rbl_reject_code = 554
qmqpd_authorized_clients =
allow_mail_to_commands = alias, forward
relay_transport = relay
bounce_queue_lifetime = 5d
masquerade_domains =
smtp_sender_dependent_authentication = no
smtpd_sender_login_maps =
lmtp_tls_CAfile =
address_verify_poll_delay = 3s
smtp_discard_ehlo_keywords =
delay_warning_time = 0h
smtp_connect_timeout = 30s
smtp_tls_mandatory_exclude_ciphers =
service_throttle_time = 60s
milter_default_action = tempfail
smtp_data_init_timeout = 120s
detect_8bit_encoding_header = yes
2bounce_notice_recipient = postmaster
default_delivery_slot_cost = 5
smtp_tls_verify_cert_match = hostname
qmqpd_client_port_logging = no
smtpd_tls_ask_ccert = no
masquerade_classes = envelope_sender, header_sender, header_recipient
qmgr_message_active_limit = 20000
address_verify_local_transport = $local_transport
lmtp_tls_fingerprint_cert_match =
connection_cache_ttl_limit = 2s
smtpd_etrn_restrictions =
virtual_destination_rate_delay = $default_destination_rate_delay
export_environment = TZ MAIL_CONFIG LANG
lmtp_tls_exclude_ciphers =
virtual_alias_recursion_limit = 1000
stress =
smtpd_hard_error_limit = 20
smtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
smtp_connection_cache_on_demand = yes
smtp_tls_key_file = $smtp_tls_cert_file
trigger_timeout = 10s
address_verify_poll_count = 3
fast_flush_refresh_time = 12h
smtp_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_proxy_ehlo = $myhostname
relay_destination_rate_delay = $default_destination_rate_delay
lmtp_pix_workarounds = disable_esmtp,delay_dotcrlf
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
mail_version = 2.5.5
relay_initial_destination_concurrency = $initial_destination_concurrency
remote_header_rewrite_domain =
max_idle = 100s
mailbox_command_maps =
empty_address_relayhost_maps_lookup_key = <>
default_destination_concurrency_failed_cohort_limit = 1
multi_recipient_bounce_reject_code = 550
smtpd_sasl_exceptions_networks =
smtpd_tls_auth_only = no
use_od_delivery_path = no
verp_delimiter_filter = -=+
smtpd_sender_restrictions =
smtp_pix_workaround_delay_time = 10s
smtp_data_done_timeout = 600s
smtpd_restriction_classes =
mailbox_command =
lmtp_data_init_timeout = 120s
recipient_bcc_maps =
smtpd_tls_session_cache_database =
virtual_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
allow_mail_to_files = alias, forward
address_verify_negative_refresh_time = 3h
smtpd_tls_loglevel = 0
lmtp_tls_policy_maps =
lmtp_lhlo_timeout = 300s
lmtp_tls_session_cache_timeout = 3600s
lmtp_tls_mandatory_ciphers = medium
plaintext_reject_code = 450
initial_destination_concurrency = 5
lmtp_quit_timeout = 300s
smtpd_client_recipient_rate_limit = 0
smtpd_proxy_filter =
tls_medium_cipherlist = ALL:!EXPORT:!LOW:+RC4:@STRENGTH
default_database_type = hash
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
smtp_sasl_auth_cache_time = 90d
fast_flush_purge_time = 7d
local_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
body_checks_size_limit = 51200
smtp_body_checks =
smtp_header_checks =
unknown_client_reject_code = 450
lmtp_discard_lhlo_keyword_address_maps =
empty_address_recipient = MAILER-DAEMON
lmtp_skip_5xx_greeting = yes
smtp_destination_rate_delay = $default_destination_rate_delay
berkeley_db_read_buffer_size = 131072
virtual_mailbox_limit = 51200000
invalid_hostname_reject_code = 501
smtpd_sasl_security_options = noanonymous
address_verify_virtual_transport = $virtual_transport
inet_protocols = ipv4
default_process_limit = 400
smtp_sasl_security_options = noplaintext, noanonymous
smtp_host_lookup = dns
fork_delay = 1s
smtpd_reject_unlisted_sender = no
defer_code = 450
lmtp_connect_timeout = 0s
local_destination_rate_delay = $default_destination_rate_delay
lmtp_data_done_timeout = 600s
milter_protocol = 2
lmtp_connection_cache_destinations =
smtpd_data_restrictions =
smtp_tls_scert_verifydepth = 9
smtp_tls_CAfile =
milter_command_timeout = 30s
smtpd_tls_session_cache_timeout = 3600s
smtpd_milters =
syslog_facility = mail
smtp_tls_fingerprint_cert_match =
defer_transports =
enable_original_recipient = yes
fork_attempts = 5
use_getpwnam_ext = yes
milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr}
default_destination_rate_delay = 0s
milter_rcpt_macros = i {rcpt_addr}
smtp_quote_rfc821_envelope = yes
command_time_limit = 1000s
default_destination_recipient_limit = 50
lmtp_use_tls = no
smtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
smtp_tls_cert_file =
smtpd_policy_service_timeout = 100s
queue_service_name = qmgr
hash_queue_names = deferred,defer
smtp_cname_overrides_servername = no
smtpd_tls_fingerprint_digest = md5
lmtp_bind_address =
milter_macro_v = $mail_name $mail_version
smtpd_recipient_limit = 1000
mime_boundary_length_limit = 2048
smtp_connection_cache_destinations =
smtpd_tls_wrappermode = no
queue_run_delay = 300s
minimal_backoff_time = 300s
local_destination_concurrency_limit = 2
virtual_mailbox_domains = $virtual_mailbox_maps
lmtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
unknown_virtual_alias_reject_code = 550
virtual_destination_recipient_limit = $default_destination_recipient_limit
best_mx_transport =
sender_dependent_relayhost_maps =
rbl_reply_maps =Sorry, Monday morning fog... Here is a postconf -n
Wow I need more coffee...
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = $double_bounce_sender
address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
always_bcc =
anvil_rate_time_unit = 60s
anvil_status_update_time = 600s
application_event_drain_time = 100s
authorized_flush_users = static:anyone
authorized_mailq_users = static:anyone
authorized_submit_users = static:anyone
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
bounce_template_file =
canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
check_for_od_forward = yes
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_execution_directory =
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
connection_cache_protocol_timeout = 5s
connection_cache_service_name = scache
connection_cache_status_update_time = 600s
connection_cache_ttl_limit = 2s
content_filter = smtp-amavis:[127.0.0.1]:10024
cyrus_sasl_config_path =
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
data_directory = /var/lib/postfix
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_failed_cohort_limit = 1
default_destination_concurrency_limit = 20
default_destination_concurrency_negative_feedback = 1
default_destination_concurrency_positive_feedback = 1
default_destination_rate_delay = 0s
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 400
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 20000
default_recipient_refill_delay = 5s
default_recipient_refill_limit = 100
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_logging_resolution_limit = 2
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
destination_concurrency_feedback_debug = no
detect_8bit_encoding_header = yes
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
empty_address_relayhost_maps_lookup_key = <>
enable_original_recipient = yes
enable_server_options = yes
error_notice_recipient = postmaster
error_service_name = error
execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
export_environment = TZ MAIL_CONFIG LANG
fallback_transport =
fallback_transport_maps =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
frozen_delivered_to = yes
hash_queue_depth = 1
hash_queue_names = deferred,defer
header_address_token_limit = 10240
header_checks = pcre:/etc/postfix/custom_header_checks
header_size_limit = 102400
hopcount_limit = 50
html_directory = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
in_flow_delay = 1s
inet_interfaces = all
inet_protocols = ipv4
initial_destination_concurrency = 5
internal_mail_filter_classes =
invalid_hostname_reject_code = 501
ipc_idle = 5s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_bind_address =
lmtp_bind_address6 =
lmtp_body_checks =
lmtp_cname_overrides_servername = no
lmtp_connect_timeout = 0s
lmtp_connection_cache_destinations =
lmtp_connection_cache_on_demand = yes
lmtp_connection_cache_time_limit = 2s
lmtp_connection_reuse_time_limit = 300s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_defer_if_no_mx_address_found = no
lmtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
lmtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
lmtp_destination_rate_delay = $default_destination_rate_delay
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_discard_lhlo_keyword_address_maps =
lmtp_discard_lhlo_keywords =
lmtp_enforce_tls = no
lmtp_generic_maps =
lmtp_header_checks =
lmtp_host_lookup = dns
lmtp_initial_destination_concurrency = $initial_destination_concurrency
lmtp_lhlo_name = $myhostname
lmtp_lhlo_timeout = 300s
lmtp_line_length_limit = 990
lmtp_mail_timeout = 300s
lmtp_mime_header_checks =
lmtp_mx_address_limit = 5
lmtp_mx_session_limit = 2
lmtp_nested_header_checks =
lmtp_pix_workaround_delay_time = 10s
lmtp_pix_workaround_maps =
lmtp_pix_workaround_threshold_time = 500s
lmtp_pix_workarounds = disable_esmtp,delay_dotcrlf
lmtp_quit_timeout = 300s
lmtp_quote_rfc821_envelope = yes
lmtp_randomize_addresses = yes
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 20s
lmtp_sasl_auth_cache_name =
lmtp_sasl_auth_cache_time = 90d
lmtp_sasl_auth_soft_bounce = yes
lmtp_sasl_mechanism_filter =
lmtp_sasl_path =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
lmtp_sasl_type = cyrus
lmtp_send_xforward_command = no
lmtp_sender_dependent_authentication = no
lmtp_skip_5xx_greeting = yes
lmtp_starttls_timeout = 300s
lmtp_tcp_port = 24
lmtp_tls_CAfile =
lmtp_tls_CApath =
lmtp_tls_cert_file =
lmtp_tls_dcert_file =
lmtp_tls_dkey_file = $lmtp_tls_dcert_file
lmtp_tls_enforce_peername = yes
lmtp_tls_exclude_ciphers =
lmtp_tls_fingerprint_cert_match =
lmtp_tls_fingerprint_digest = md5
lmtp_tls_key_file = $lmtp_tls_cert_file
lmtp_tls_loglevel = 0
lmtp_tls_mandatory_ciphers = medium
lmtp_tls_mandatory_exclude_ciphers =
lmtp_tls_mandatory_protocols = SSLv3, TLSv1
lmtp_tls_note_starttls_offer = no
lmtp_tls_per_site =
lmtp_tls_policy_maps =
lmtp_tls_scert_verifydepth = 9
lmtp_tls_secure_cert_match = nexthop
lmtp_tls_security_level =
lmtp_tls_session_cache_database =
lmtp_tls_session_cache_timeout = 3600s
lmtp_tls_verify_cert_match = hostname
lmtp_use_tls = no
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
local_destination_concurrency_limit = 2
local_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
local_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
local_destination_rate_delay = $default_destination_rate_delay
local_destination_recipient_limit = 1
local_header_rewrite_clients = permit_inet_interfaces
local_initial_destination_concurrency = $initial_destination_concurrency
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
local_transport = local:$myhostname
luser_relay =
mail_name = Postfix
mail_owner = _postfix
mail_release_date = 20080902
mail_spool_directory = /var/mail
mail_version = 2.5.5
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = flock, dotlock
mailbox_size_limit = 0
mailbox_transport = dovecot
mailbox_transport_maps =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_reject_characters =
message_size_limit = 20971520
message_strip_characters =
milter_command_timeout = 30s
milter_connect_macros = j {daemon_name} v
milter_connect_timeout = 30s
milter_content_timeout = 300s
milter_data_macros = i
milter_default_action = tempfail
milter_end_of_data_macros = i
milter_end_of_header_macros = i
milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
milter_macro_daemon_name = $myhostname
milter_macro_v = $mail_name $mail_version
milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr}
milter_protocol = 2
milter_rcpt_macros = i {rcpt_addr}
milter_unknown_command_macros =
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 300s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname, localhost.$mydomain, gretemangroup.com, mail.gretemangroup.com, $mydomain
mydomain = gretemangroup.com
mydomain_fallback = localhost
myhostname = mail.gretemangroup.com
mynetworks = 127.0.0.0/8,192.168.111.0/24,65.175.107.129,216.198.218.183,67.227.192.77
mynetworks_style = subnet
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases
non_fqdn_reject_code = 504
non_smtpd_milters =
notify_classes = resource, software
owner_request_special = no
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
plaintext_reject_code = 450
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $sender_bcc_maps $recipient_bcc_maps $smtp_generic_maps $lmtp_generic_maps
proxy_write_maps = $smtp_sasl_auth_cache_name $lmtp_sasl_auth_cache_name
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_client_port_logging = no
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /private/var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 300s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix
receive_override_options =
recipient_bcc_maps =
recipient_canonical_classes = envelope_recipient, header_recipient
recipient_delimiter = +
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
relay_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
relay_destination_rate_delay = $default_destination_rate_delay
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_initial_destination_concurrency = $initial_destination_concurrency
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
remote_header_rewrite_domain =
resolve_null_domain = no
resolve_numeric_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix/examples
send_cyrus_sasl_authzid = no
sender_bcc_maps =
sender_canonical_classes = envelope_sender, header_sender
sender_canonical_maps =
sender_dependent_relayhost_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = _postdrop
showq_service_name = showq
smtp_bind_address6 =
smtp_body_checks =
smtp_cname_overrides_servername = no
smtp_connect_timeout = 30s
smtp_connection_cache_destinations =
smtp_connection_cache_on_demand = yes
smtp_connection_cache_time_limit = 2s
smtp_connection_reuse_time_limit = 300s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
smtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
smtp_destination_rate_delay = $default_destination_rate_delay
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_discard_ehlo_keyword_address_maps =
smtp_discard_ehlo_keywords =
smtp_enforce_tls = no
smtp_fallback_relay = $fallback_relay
smtp_generic_maps =
smtp_header_checks =
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_initial_destination_concurrency = $initial_destination_concurrency
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mime_header_checks =
smtp_mx_address_limit = 5
smtp_mx_session_limit = 2
smtp_nested_header_checks =
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_maps =
smtp_pix_workaround_threshold_time = 500s
smtp_pix_workarounds = disable_esmtp,delay_dotcrlf
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 20s
smtp_sasl_auth_cache_name =
smtp_sasl_auth_cache_time = 90d
smtp_sasl_auth_soft_bounce = yes
smtp_sasl_mechanism_filter =
smtp_sasl_password_maps =
smtp_sasl_path =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $smtp_sasl_security_options
smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
smtp_sasl_type = cyrus
smtp_send_xforward_command = no
smtp_sender_dependent_authentication = no
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_exclude_ciphers =
smtp_tls_fingerprint_cert_match =
smtp_tls_fingerprint_digest = md5
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers =
smtp_tls_mandatory_protocols = SSLv3, TLSv1
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_policy_maps =
smtp_tls_scert_verifydepth = 9
smtp_tls_secure_cert_match = nexthop, dot-nexthop
smtp_tls_security_level =
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_tls_verify_cert_match = hostname
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_rate_limit = 0
smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
smtpd_client_message_rate_limit = 0
smtpd_client_new_tls_session_rate_limit = 0
smtpd_client_port_logging = no
smtpd_client_recipient_rate_limit = 0
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org reject_rbl_client bl.spamcop.net permit
smtpd_data_restrictions =
smtpd_delay_open_until_valid_rcpt = yes
smtpd_discard_ehlo_keyword_address_maps =
smtpd_discard_ehlo_keywords =
smtpd_end_of_data_restrictions =
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtpd_forbidden_commands = CONNECT GET POST
smtpd_hard_error_limit = 20
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_milters =
smtpd_noop_commands =
smtpd_null_access_lookup_key = <>
smtpd_peername_lookup = yes
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_pw_server_security_options = login,cram-md5
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination permit
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_auth_enable = yes
smtpd_sasl_authenticated_header = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_path = smtpd
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = cyrus
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile = /etc/certificates/mail.BEFAEE692989865720B94CAF24F6BCADC7780636.chain.pem
smtpd_tls_CApath =
smtpd_tls_always_issue_session_ids = yes
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 9
smtpd_tls_cert_file = /etc/certificates/mail.BEFAEE692989865720B94CAF24F6BCADC7780636.cert.pem
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_exclude_ciphers =
smtpd_tls_fingerprint_digest = md5
smtpd_tls_key_file = /etc/certificates/mail.BEFAEE692989865720B94CAF24F6BCADC7780636.key.pem
smtpd_tls_loglevel = 0
smtpd_tls_mandatory_ciphers = medium
smtpd_tls_mandatory_exclude_ciphers =
smtpd_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_security_level =
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_pw_server = yes
smtpd_use_tls = yes
stale_lock_time = 500s
stress =
strict_mailbox_ownership = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_export_cipherlist = ALL:+RC4:@STRENGTH
tls_high_cipherlist = ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH
tls_low_cipherlist = ALL:!EXPORT:+RC4:@STRENGTH
tls_medium_cipherlist = ALL:!EXPORT:!LOW:+RC4:@STRENGTH
tls_null_cipherlist = eNULL:!aNULL
tls_random_bytes = 32
tls_random_exchange_name = ${data_directory}/prng_exch
tls_random_prng_update_period = 3600s
tls_random_reseed_period = 3600s
tls_random_source = dev:/dev/urandom
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
use_getpwnam_ext = yes
use_od_delivery_path = no
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps = $virtual_maps
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
virtual_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
virtual_destination_rate_delay = $default_destination_rate_delay
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_initial_destination_concurrency = $initial_destination_concurrency
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl, dotlock
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps = -
Having a problem with the ios 7 update and email.
One of my email inboxes keeps showing up as unread emails. I mark them all as read, then a short while later they show up as unread again. This only occurs with my hotmail account. Ideas?
Try powering the iPhone down and back on. If that doesn't help, go to Settings -> General -> Resets and reset the Network Settings. One or the other of those steps cures the problems with iMessages for many people.
Regards. -
I'm having to turn off and on my iPhone at least once a day to update time, and/or to receive texts that are not coming through when they should've gone through. Also, why don't the links open when i click on them from my email? Also, phone has to reconnect to wifi every time I unlock it. Any recommendations???
First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
This is something that often cures strange problems like yours. I hope it works for you. -
Configuring the iPhone and your environment for wireless corporate email
I'm posting this as a top level thread, because I'm certain that there are others out there, who like me, are trying to figure this out.
Configuring the iPhone for Enterprise Use
With Apple’s release of the iPhone, IT organizations are presented with an interesting challenge. Senior execs, gadget heads, and technoratti are all flocking to this device, heralded as the be all and end all of smartphone telecommunications technology. As these devices begin to flood into our organizations, we are met with the challenge to ‘make it work’.
After much explaining that the iPhone is not intended for Enterprise integration, and many discussions surrounding the technical feasibility of bringing said devices into the fold, and being the resident Mac and Linux head with an iPhone in hand, I decided to embark on the mission of making one ‘work’. I succeeded in part, however it’s not the kind of ‘work’ that is going to be viable for most end users.
First of all, it’s important to understand that the email client for the iPhone is a modified version of Mac’s Mail program. Not the best client in the world, but it does support Exchange integration. It also does external email sources, such as Yahoo and gMail, very well. For my interest though, I’m focusing on the Exchange integration functionality, as that is just about everyone’s corporate standard.
Bringing this task to fruition requires some understanding about the limitations of the iPhone, as well as some of its current quirks. Wireless802.11x, EDGE, VPN and Mail are all components necessary to provide a serviceable solution for mobile email access, and each of these things has some peculiarities that don’t appear to be fully worked out by Apple at this time.
For instance, within my organization, we have a secured wireless connectivity option available within our building; however, the SSID of this network is not broadcast, for the obvious reasons. SO, connecting the iPhone to it is a manual process of defining the network, and automatic reconnection seems to be very hit or miss, so it becomes far less of an option for any form of direct network access to your Exchange environment. (As an example, I had to redefine that network, on the iPhone, at least half a dozen times during this process.)
The other components have equally quirky issues, and I will discuss the how’s to get around them below.
In coordinating this into a cohesive plan however, I will break this into three sections;
1. Wireless and EDGE connectivity
2. VPN access to your network
3. Connecting to Exchange
So, without further ado;
Wireless and EDGE Connectivity
The wireless capabilities of the iPhone are, on the surface at least, excellent. It connects seamlessly to unsecured networks, offers the option of prompted or unprompted automatic connectivity, and is capable of 802.11G performance. Not bad for such a small package. However, it is very limited in the forms of secure network access it supports. These are, to quote Apple’s website; (and my iPhone)
WEP Password
WEP hex or ASCII
WPA (personal)
WPA2 (personal)
Now, due to the obvious security problems in implementing WEP security, it’s likely that any network you run into is going to be WPA or WPA2. The iPhone ONLY supports the personal versions of these protocols, so be aware of this going into the situation. If you’re not connecting to your work or school wireless, and you’re entering the information correctly, then it’s probably because they have the Enterprise version of one of the protocols enabled. If that is the case, then you’re either hunting for unsecured hotspots, or else depending on EDGE.
In my case, I did have access to a WPA2 (Personal) enabled wireless signal to connect to my internal network. I thought my problem was half solved! I defined the connection, the wireless capability of the phone worked perfectly, and I was connected. I was wrong. Apparently, and judging from the Mac forums I’m not alone in this, the iPhone does not do a very good job of RE-connecting to a secured wireless network. It does an even worse job, when this is coupled with the fact that it doesn’t do a very good job reconnecting to a wireless network with an unpublished SSID.
After much fiddling and research into this, I determined that this simply was not the way to go, and I abandoned the idea. I wasn’t about to compromise my network security in order to get this silly phone working! So, that left me with either unsecured WiFi, or EDGE.
Either one of these connects pretty seamlessly, and gives me a relatively decent Internet connection. There are some issues being reported of the iPhone swapping between EDGE and WiFi for not apparent reason, but that said, it can still be made to work.
Now that I had this connection outside of my network, I obviously had to consider options for getting a secured connection into my network, which of course leads us to;
VPN Access Into Your Network
Being that this device was touted as the ‘real internet’ I was very excited to see if I could achieve this connection through my SSL VPN appliance. To make a long story short, I could not. Because Apple’s idea of the ‘Real Internet’ apparently does not include those wacky concepts like Java support, this proved to be impossible. My Apple cohorts will scream that it does support JavaScript, but we all know that that and 2 bucks will get you a small coffee at Starbucks… and not much more.
(The iPhone also does not support Flash, but that’s a topic for another conversation. I know, how could they leave that out? I’m amazed too, but then Steve Jobs always has been a bit too arrogant for his own good… I mean what does he expect, we’re all going to rewrite everything into QuickTime??? Please.)
Since that option didn’t work, I was left with the wide selection of two possibilities provided within the iPhone software. Either, a PPTP or L2TP VPN tunnel.
We went ahead and configured a PPTP connection on one of our Cisco routers in order to test this. It didn’t work. I couldn’t connect to it. Tried and tried. Nada. SOOOO, we said OK, and configured a L2TP connection on one of our Cisco routers, with similar results.
Figuring that this was something in the config, we called Cisco, and did the technical support dance with them for several days, trying one thing after another to get this connection to actually work. Nothing helped, and it never worked using either protocol. Then, I noticed an obscure article somewhere on some website that said something to the effect that getting one of these tunnels to work from the iPhone to Cisco was nigh on impossible.
About the same time, my senior network guy said screw it, let’s put this on a Microsoft server. And so we did. Now, this is interesting in it’s own right, because configuring out of the box L2TP or PPTP on a Microsoft server results in a default authentication method of Windows Authentication. This does not work for the iPhone, because it has no idea what to do with the Windows security token it receives. So, you authenticate, and then are immediately dropped due to an inability to communicate with the PPP server.
Fortunately, we (as do most organizations) have a Radius server. We selected Radius authentication, configured both sides of the Radius authentication setup properly, and launched the PPTP tunnel…. AND…. EUREKA!!! The iPhone’s VPN software connected, authenticated, got an IP, and I was on the network! Well, no.
After about 2 seconds, I realized that while I did indeed have a connection, I couldn’t do anything with it. Couldn’t even browse to an internal site via IP address. The connection was up, the connection was working, the connection was useless.
So, we decided to give L2TP a shot. Configured it pretty much identically to the PPTP setup, used Radius, launched the iPhone client, and finally, after many days of screwing around, it worked. Now all I needed was to get my email working, so I started working on;
Connecting to Exchange
In the Mail program on the iPhone, the first time you launch it, you’re presented with the ability to configure an email source. However on subsequent or additional accounts, you must go under Settings, Mail to get to this functionality.
Going into the Mail configuration, I selected an additional account, the account type is, of course, Exchange. The configuration components are pretty obvious, however some things of note are;
Do NOT include your domain information in the User Name field
For all Host Names, use the fully qualified domain name of the server, or else IP
You WILL need to have SMTP enabled somewhere in order to send email
Anyway, I set all this up, and nothing happened. It said that my server was not responding. Did a little research, and it turns out that the only way to connect to Exchange is through an IMAP4 connection, and just in case you didn’t know, IMAP4 is disabled by default, so you have to enable and configure it.
Went onto the Exchange server, set the service to Auto, Started the listener, and finally, at long last, EUREKA! I finally had Corporate email on my iPhone, connecting securely, and not sending anything plain text anywhere. Hooray!
Now for the problems with this solution;
First of all, it depends upon VPN access into your environment, something that you may or may not be comfortable with. One good thing is that the iPhone does prompt for password to reconnect, and will tie the continuity of the VPN connection into the general phone lock security, such that an inability to provide the appropriate access code to a locked phone results in the VPN not being accessible.
The VPN of course is dependant upon a reliable network connection. I’ve noticed that it’s somewhat graceful in switching between WiFi and EDGE, however it’s not totally graceful, and you can experience some hinky things, like being able to send and not receive, or the mail client saying ‘Connecting’ for about 5 minutes before it figures things out.
The best cure for this is to simply stop and restart the VPN connection. Note that when you reconnect, the first attempt will prompt you for a numeric password, this is meaningless unless you have the device lock turned on. Just enter anything. (I think this is another bug) THEN it will re-prompt you for your real VPN password.
This solution for email delivery is obviously dependant upon the VPN connection being active. I’ve noticed that at times the iPhone will disconnect the VPN (probably when service switching) and not bother to mention it. When that happens, of course the VPN must be restarted.
For the lazy, this is an inconvenient solution because while it would appear that the iPhone will cache the VPN password, in fact it will not. That means that each re-launch requires that you re-enter your password. Not terrible for me, but I could see it being very tedious for the average corporate user.
The OSX Mail client has several little deficiencies, which may or may not impact your use of the device in this manner. For instance, if you have subfolders defined for your inbox, and server side rules to move mail into them, then you will not see any synchronization of that mail until you actually select the subfolder. Also, since there is such poor management of attachments and downloads, moving anything around via email on this device is nigh on impossible.
EDGE access to your corporate email, via a VPN, is a bit sloooooow. It works, it’s certainly fast enough for my purposes, but it’s not the slick quick access that we’ve all become accustomed to with Blackberry and Good devices. The lack of 3G support becomes a very noticeable shortcoming here.
(Why Apply didn’t simply partner with Good Technologies to crank out a client for this thing, I’ll never understand, but I guess you can refer to my comment above about certain people’s arrogance.)
The biggest problem of all of course is that it’s simply klugey. I hate klugey. But, with the capabilities at this device’s disposal, and given Apple’s ambitious, if a bit idiotic, stance that no third party will develop software for the iPhone, then this is about as good as it’s going to get for now.
It is my understanding that overseas there is some initiative underway to provide a more seamless Visto or Synchronica integration for enterprise email. However, given Apple’s unbelievably restrictive agreement with ATT regarding this device and the OTA necessity of delivering the client, I seriously doubt if we’ll see this in the near future in the US.
But I digress, so…
In Conclusion
This solution is not for the faint of heart, it doesn’t work all that well, and it has way too many moving parts that are subject to failure. However, I would say that this solution is serviceable for the corporate technology professional who needs email, and really, REALLY wants the other features of the iPhone. (ie, phone whores such as me.) It requires patience, it requires an understanding that this is not a 100% thing, and there definitely needs to be a prebuilt expectation that this device will not serve your email in anything approaching the manner to which you’ve become accustomed.
As long as all of that is okay though, then go right ahead, set it up, and enjoy!
The Short Version;
(I put this at the end because I want everyone to feel my pain!)
Wireless:
Use unsecured wireless or EDGE. Secured wireless may be serviceable as long as the SSID is broadcast, but there are known issues with this.
VPN:
L2TP, shared secret, running on Microsoft server, with Radius. (May work elsewhere, but doesn’t seem to run on Cisco at all) Accounts enabled for external access.
Exchange:
Configure IMAP4 Virtual Server on your Exchange environment, ensure that you have some SMTP resource for outbound email, use fully qualified domain names for all servers (or IP) in the mail config and do not include any domain prefix or suffix for user accounts.
The BIG Disclaimer at the End
Please note that all of this is provided ‘as is’. It worked for me, and I hope it works for you. To my knowledge, it’s not endorsed by Apple, and I’m not in the business of providing support for this thing. If it breaks something, if it doesn’t work, or if you simply don’t like it or me, I don’t care. However, if you have a question, and I’m not busy, and I feel like answering, I may lend a hand. You can email me at
Matthew dot Yotko at mac dot com
Don’t be surprised or offended if I don’t answer. Also, understand that I don’t check this address every day… Maybe a couple times a week.
Macbook Pro Mac OS X (10.4.10) iphoneThanks, now I understand why the wifi keeps dropping. On my personal wireless network, it also seems the distance from the access point is not good compared to my laptop. At work our network & exchange teams don't seem to have the desire to struggle with this "toy" until customers start forcing its adoption. I am using OWA and it works fine over EDGE. I will share your posting with them.
Thank you again.
Dell Windows XP Pro -
Not recieving emails or facebook notifications
I havent recieved an email or a facebook notification in days. Anyone know what to do about it?
JackyHi and Welcome to the Forums!
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Digital Audio Extraction (DAE) Qual
How much variation is there in the "quality" of ripped raw WAV data from a CD? Forget about any encoding (MP3, WMA etc..). I'm talking about ripping the exact PCM data from a typical music CD-DA disk.Say I take the same music CD, and use several diff
-
Unable to Connect to UCM from JDeveloper
Hello, I'm using Jdeveloper Studio Edition Version 11.1.1.5.0 I created Content Repository conection, following: RIDC Socket Type: socket Server hostname: localhost Content Server Listener Port: 4444 Executing "Teste Connection" result "Success!" But
-
How do you get the camera to show on the lock screen?
-
The best conversion of avi to iTunes
I have avi movie files and I would like to convert them to mp4 (or something else) to make it works in iTunes. I have the VisualHub and QT Pro, but every time I converted it the quality was little bit worst (really just a little) than the avi file. A
-
What is the command to open all plug-in inserts on a track, either from the inspector view or the mixer view?