OUI-10055:Error in accessing the registry - webcenter content installation

Hi All,
I get this OUI error while installing Webcenter Content 11g. I checked the registry permission on HKEY_LOCAL_MACHINE -> Software -> Oracle and it has necessary permission for the user. Can someone help me identify what other registry location that I need to check to get rid of this error. The user executing the installation is part of the administrator group and I still get this error.
Regards,
- Anand

Similar Messages

Error in accessing the sample application content from the OBIEE 11g

I installed OBIEE 11g + Oracle 11g database on one machine. Everything went smoothly with no issues.
I can connection to the database from SQLPLUS.
Then I followed instructions to deploy sample app. After everything is done, when I try to access the dashboards, reports etc from the OBIEE 11g home page , I get the error below.
I am stuc kand dont know how to proceed. I verified tnsnames.ora and everything seems good.
In the SampleAPp.RPD, I set DB_SID as "ORCL" and DB_HOST as my computer name (along with domain name). No idea how to proceed from here..
I really appreciate any help.
Odbc driver returned an error (SQLExecDirectW).
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 12541, message: ORA-12541: TNS:no listener at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
Thanks

Thanks for the replies.
1) Was the oracle installed in multiple instances ? if yes set the Variable path correctly pointing to your right folder
Yes, oracle had multiple instances. I tried copying the tnsnames.ora from my oracle home to the Oracle_BI1/network/admin directory as 11g apparetnly comes with a Oracle client as BIFACTs suggested in his/her reply. I put the same in the path variable
2) Try to ping the service_name tnsping service_name(SID) from command prompt
This works.
3) check whether you may have "white spaces" in tnsnames.ora file at starting of entry
No white spaces appeated
I still see the same issue! I logged in as developer credentials as mentioned the sample app documentation.
I get the same "cannot connect to database" error.
I once in a while see an issue with javahost not starting. Not sure what is the impact of javahsot not running and all the other managed processes running.
Please help....

Error while accessing the transfer rules after installation

I get the status " Idoc type in the source system is not available" when i try to access the transfer rules of delivery service ,0sd_c04 infocube. can anyone help me to fix the error.

Hi Hari,
How you installed Transfer rules, is it through BC.
Check the Data Structure in Info Source , whether all fileds are available or not.
First delete Transfer structure and again propose the transfer rules, activate it.
Let us know status.....
Reg
Pra

Exchange setup error: "There was a problem accessing the registry on this computer"

Hi,
i am trying to install Exchange 2007 SP1 in a Windows 2003 Server standard 32 bits version.
During the "Readiness checks" i received the next error in "Hub transport role prerequisites":
Error:
There was a problem accessing the registry on this computer. This may happen if the Remote Registry service is not running; it may also indicate a network problem.
Remote Registry service is running. I've searched for the error in google and in some topics appears that the error is due to the "Client for Microsoft Networks" and "File and Printer Sharing" is not installed in the LAN properties. The server has 2 network cards and in both of them is checked. One of the connections is disabled.
I dont know what more to do, any help will be appreciated.
Thanks

No, firewall is disabled.
Setup Logs says:
10:50:04.890: Starting Collecting Data phase.
10:50:04.921: No mapping between account names and security IDs was done
10:50:04.984: Error (Unexpected error [0x674CBB7E] while executing command '[Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName)'.) trying to process object [Microsoft.Win32.RegistryKey]:penRemoteBaseKey([Microsoft.Win32.RegistryHive]::LocalMachine, [System.Net.Dns]::GetHostEntry([System.Net.Dns]::GetHostName()).HostName), skipping object.
10:50:06.093: Completed Collecting Data phase.
10:50:06.125: Error (Rule name 'PreReq_fPassiveUninstallNoCMSPresentKey' referenced by rule 'PreReq_fPassiveUninstallNoCMSPresent' in input file is not defined) in format of rules in configuration file.
10:50:06.171: Starting Postprocessing Rules phase.
10:50:06.187: Completed Postprocessing Rules phase.
Thanks for your help!

Error in accessing OLE registry

Hi everyone,
I encountered the error :
title: SBOAddon Error
error: Error in accessing OLE registry
when installing Fixed Assets in client's machine.
Anyone see this error before? I have sent log to SAP and they are not familiar with it too. Im still waiting for their responses. Just in case if anyone has seen this before, please advise me how to solve it.
Thx.
regards,
Erwine

Hi Adele,
Yes, but is there any difference between .net framework 1.1 and 2.0. Currently, .net framework installed is 1.1.
regards,
erwine

10g client install -- "Error in accessing system registry"

Yes, I am the administrator - there is just one account on my machine and it is me.
I am attempting to install 10g client in hopes of fixing another problem. Everything is a problem it seems.
When I launch setup.exe I get ...
"Error in accessing system registry. You may not have enough permissions to modify registry. Installation cannot continue."
My environment is ... Windows 7 Pro, I do have an Oracle Express Edition installed but since I am having a 32-bit vs. 64-bit issue with an app I am developing in C# 2008 Express, I thought I would try installing the 64-bit 10g standard edition client.

I didn't know this about Windows 7...
http://www.blogsdna.com/2168/windows-7-how-to-open-elevated-command-prompt-with-administrator-privileges.htm
I had to open a command prompt with Administrator privileges. I was tipped off by your link which had paragraph 1.4 Managing User Accounts with User Account Control and states,
To ensure that only trusted applications run on your computer, Windows Vista, Windows Server 2008, Windows Server 2008 R2, and Windows 7 provide User Account Control. If you have enabled this security feature, then, depending on how you have configured it, Oracle Universal Installer prompts you for either your consent or your credentials when installing Oracle Database. Provide either the consent or your Windows Administrator credentials as appropriate.
You must have Administrator privileges to run some Oracle tools, such as Database Configuration Assistant, Net Configuration Assistant, and OPatch, or to run any tool or application that writes to any directory within the Oracle home. If User Account Control is enabled, and you are logged in as the local Administrator, then you can successfully run each of these commands in the usual way. However, if you are logged in as "a member of the Administrator group," then you must explicitly invoke these tasks with Windows Administrator privileges. All the Oracle shortcuts that require Administrator privileges will be invoked as "Administrator" automatically when you click the shortcuts. However, if you run the above tools from a Windows command prompt, you must run them from an Administrator command prompt. OPatch does not have a shortcut and has to be run from an Administrator command prompt.
I followed the instructions concerning the elevated command prompt and then tried the Oracle 10g standard edition client install. I got past the registry problem but then I ran into a Universal Installer 10.2 problem. A window popped up stating, "Abnormal program termination. An internal error has occurred. Please provide the following files to Oracle Support:"
"Unknown"
"Unknown"
"Unknown"
Maybe that is due to 10g not being supported on Windows 7. So NOW I will try 11gR2. :-)

Getting Error while accessing the data using odata service

Hi All,
Iam new to SAP FIORI.
Iam getting the below error while accessing the data using odata service.
"Failed to load resource: the server responded with a status of 404 (Not found)"
"No 'Access-Control-Allow-Origin' header is present on the requested resource. Origin "
i have tried all the solutions like changing the url pattern "proxy/htttp".
and disabled - security in chrome (Chrome is Updated version).
i tried with IE still got the same problem.
And installed all the required software in eclipse
While installing GWPA plugin i got the following error.
let me know if any one have idea.
Thanks in advance.

> Do you want to add and/or update the data in the already existing tables or do you want to replace the content completely?
>
> so in that way :
> bot the options are fine what ever take less time.
Sorry mate, but YOU have to know what you want here.
I gave you an easy to follow set of steps.
As you don't seam to mind the outcome, just might just use them...
> I wanted to know weathe i can use the loadercli for thie export import or not? if yes then is there any new steps to do before i do the export import?
We had this discussion before...
>
> For that the easiest option would be just to drop the tables of SAPR3 and run the import again.
>
> For ease of use you could also just do:
> - logon as superdba
> - drop user SAPR3
> - create user SAPR3 password SOMEPW not exclusive dba
>
> After these steps you can easily pump the data into the database again.
>
> So here in th above given steps , i am creating a new SAPR3 user and why it is not exclusive dba ?
> i already have that user SAPR3 can i use the same.
Yes, you do have the SAPR3 user.
But you don't seem to like to read documentation or learn about how the tools work or anything like that.
Therefore I gave you s simple way to reach your goal.
Of course it's possible to reuse the user.
But then you would have to deal with already existing tables, already existing data etc.
You don't seem to be able to do that. So, the easy steps might be better suited for your needs.
regards,
Lars

Error while accessing the application server file

Hello,
When I try to load the data from CSV file to PSA , I am getting following error message
"Error while accessing the application server file"
"Errors in source system"
I gave the right file path
I am not sure about this error message.
Thanks,

Hi ram,
if you have more than one application server running in your BI system (see at transaction SM51) be aware that your infopackage will be executed on the right one. Each application server has its own file system and your job need to run on the server your file is stored on.
Also check if the os user of the SAP system itself (<sid>adm on Unix) has rights to read that file.
Bye
Frank

Webpart causing error while accessing the subsite.

Hi
I am getting an error message saying that webpart causes error in accessing the site in MOSS 2007.
PFA of the error:
Please someone help with the error webpart:
how to find which custom webpart is affecting the site access error.
Thanks,
Badri

Hi Badri ,
According to your error message, the web part which cause error is the “RecentlyUpdatedSites” web part. For your issue, you can open the Web Part Maintenance page.
For opening the Web Part Maintenance page by just adding the following query string to the page URL
?contents=1 So, if your page URL is 'http://servername/sitename/home.aspx' then after appending the query string it should look like ' http://servername/sitename/home.aspx?contents=1'
Using this approach, we can open the web part maintenance page , close or delete these wrong web part.
Reference:
Opening Web Part Maintenance Page
Best Regards,
Eric
Eric Tao
TechNet Community Support

Error: "Cannot access the web server" with BlazeDS Turnkey

Help! I'm new to Flex and BlazeDS and Eclipse. I was trying to setup a Flex Project using a BlazeDS/Tomcat server running from Eclipse on Windows XP per the example in flexbandit.com/archives/55#comment-269 and in (www.infoq.com/articles/blazeds-intro).   I am NOT using the Eclipse Flex plug-in. I'm using Flex Builder for the Flex code.
Here's what I've done:
I installed BlazeDS and tested http://localhost:8400 - That worked.
I setup Tomcat in Eclipse. - That seemed to work.
I created a Dynamic Web Project in Eclipse - That seemed to work.
I created the bare-bones BlazeDS Configuration under the Eclipse project and then created a basic HelloWorld java class.
I added the destination in the “remoting-config.xml” file found in the c:/projects/workspace/ReportGenTool/WebContent/WEB-INF/flex” directory:
<destination id="HelloWorld">   <properties> <source>HelloWorld</source> </properties> </destination>
When I started the application server by clicking on the server's green play button in Eclipse and then tried to open localhost:8400/ReportGenTool, I got the 404 error : The requested source (/ReportGenTool/) is not available which according to the instructions is fine.
Next I created a Flex Project, but when I try to validate the new Flex project configuration, it gives me an error "Cannot access the web server. The server may not be running, or the web root folder or root URL may be invalid."
When I validated the server was running after setting up the BlazeDs Turnkey, I saw the BlazeDS page.
Now when I bring up http://localhost:8400 I get:
      Directory Listing for /
      Apache Tomcat/6.0.14
My eclipse project is named ReportGenTool and I've overwritten the WebContent directory with the META-INF and WEB-INF directories from the BlazeDS installation (C:\blazeds\tomcat\webapps\blazeds). According to Eclipse the server is running.
My Flex project is named ReportGenTool and is located in another directory away from the Eclipse project directory.
     My root folder is: C:\Projects\workspace\ReportGenTool\WebContent
     Root URL: is http://localhost:8400/ReportGenTool/
     Context root is: /ReportGenTool/
Any idea what might be wrong? What didn't I configure that needs to be configured?
Thanks in advance.

This is not working because your router has a direct to your web server that is not through the outside interface which is needed for nat to occur, for this to work you need to setup a loopback interface as nat outside and policy route traffic to there for your server traffic
Bu if your server is internal why do you need nat at all? Can you not use bind with views that might be simpler
M
Sent from Cisco Technical Support iPad App

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?

It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.

A reflection error occurred accessing the object.-- Error

I am trying to update from default field value to some other value by using the script definition, however system is throwing the "A reflection error occurred accessing the object."
If anyone has any idea/solution please help me.
regards
Sumanta

Hi Devesh,
I wrote a Field Validation Script and as per your guidelines i update the script,however got the different error.
new changed script
doc.getExtensionField("CURRENCY").get().setDisplayName("AOA");
and also tried with
doc.getExtensionField("CURRENCY").get().setDisplayName("-2147483442:601:AOA");
and the error message received is like
Error executing script: Sourced file: inline evaluation of: ``doc.getExtensionField("CURRENCY").get().setDisplayName("AOA"); . . . '' : target exception.
It is not allowing to modify/update the existing field value by using script.
Please let me know if you have any suggestion.
Regards
Sumanta

-18001: An error occured accessing the LabVIEW ActiveX automation server

Hi,
I'm currently investigating a problem with a Teststand 2.0 sequence. The
sequence makes use of VI's that call methods of an ActiveX. After a few
successful loops through the test sequence the error "-18001: An error
occured accessing the LabVIEW (6.1) ActiveX automation server" is brought up
in Teststand. I think that somehow the ActiveX automation server is dying
during the execution of the sequence but I don't know where to start
searching...The problem does not seem to lie within the ActiveX istself, but
I'm not sure. Using the same ActiveX within a Visual Basic Application and
performing the same commands several times does not produce a failure. Has
anybody an idea what could be the problem
Thanks, Sven.

Thanks, but I already know these entries from the Knowledge Base. I found no
help in there and my error text is also not mentioned there.
JRA schrieb in im Newsbeitrag:
[email protected]..
> There is actually a few Knowledge Bases on NI's website which deals
> with this exact issue. You will probably want to start there.
> 1. >
"http://digital.ni.com/public.nsf/websearch/55574CB4E0F326DF862567FD0077E303
?OpenDocument">-18001
> ...
> 2. >
"http://digital.ni.com/public.nsf/websearch/D8690EC8044C7B3586256C63005D4D84
?OpenDocument">Why
> do ...

CSA prevents remote application from accessing the registry

Hi all,
I have recently install CSA 6.01.106 and I am getting the following notification in the event log.
Audit: The process '<remote application>' (as user PROD01\S60MP6I$) attempted to access the registry key '\REGISTRY\MACHINE' and value ''. The attempted access was an open (operation = OPEN/KEY). The operation would have been denied.
does anyone know how to create an execption without creating a blanket rule to permit everything?
Or are you able to provide me with some more tips to assist me with what is going on here?
many thanks

You can create a user state that will allow remote connections if it is legitimate.
It may be trying to read permissions to connect or run an application.
Tom

Error while accessing a library using content and structure

I have a library having document and folder inside it. When I open the library using content and structure I get an error with a correlation ID. When checked the the logs with Correlation ID got an error message "View 'All Document' does not exist."
'All Document' is name of default view on the library.
When I open the library from view all site content the library is being opened.
Please help!!!

Hello Victoria,
Thanks for the response.
I have tried troubleshooting steps given by you.
Check if the issue occurs with other users. Use another user to access the library in Content and Structure and then compare the results. --
I tried with different users but no luck
Make sure that the user account with issue has permission to view the All Documents view of the library. --
Yes, user Account have the permission
Check if the issue occurs with other libraries in the Content and Structure. If not, I recommend to save the library as
a template including contents and then create a new library based on this template. After that use the new library instead of the old library. --
No other library have this problem. I cannot save the library as template including the contents as the it has many folders and files. The current size of library is 786 MB
Clear cache in the browser or use another browser to see if the issue still occurs. --
tries but issue persists.
Best regards,
Ratnesh

OUI-10055:Error in accessing the registry - webcenter content installation

Similar Messages

Maybe you are looking for