Oui-10207error while installing oracle 10g on linux in vmware

Hi,
I have installed vmware on windows 7(64 bit) on which i have installed Oracle Enterprise linux 5. I have set all the variables correctly. but when i try to install oracle 10g on linux, i get the error
OUI-10207:there is not enough disk space in the OUI swap area /tmp/OraInstall2011-10-17_03-44-48PM.Please make atleast 529KB of space avaivale and retry.
but i have around 95bg of space. My partitions are as follows
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12551 100815876 83 linux
/dev/sda2 12552 13041 3935925 82 Linux swap/solaris
/dev/sda3 13042 13054 104422+ 83 linux
Please help me in solving the problem.
Thanks
Viraj

What is your swap size? try to increase size
execute below command on terminal, paste result here.
#swapon -s
#free
Tips : how to increase swap space
http://hackertrip.wordpress.com/2011/09/11/increase-swap-space/

Similar Messages

Problem while installing oracle 10g on linux fedora 9 (suphur)

fallied to check sistem operating
is not found in the log of this session in / tmp/orainstall2008-8-21_03-34-55pm/installactions2008-08-21_03-34-55PM.log
some can help me about this please.
thanks

Actually that Linux version is not supported for 10g. You may try starting the installer as
$ ./runInstaller -ignoreSysPrereqs
BTW, not sure you won't have any problems afterwards, but it should work.

This problem appears while installing oracle 10g on enterprise linux

Hi All,
While installing oracle 10g on enterprise linux 5 this message apear:
http://img134.imageshack.us/my.php?image=problemqy2.png
More Info:
Oracle 10g supports redhat 4 and Enterprise Linux is redhat 5 so I changed the redhat-release to 4 to countinue setup but the above error appears, also I tried this configuration on SuSE 10 I changed the SuSE-release to 9 and went good.

The packeges are already installedIf you execute runInstaller again is the error message the same as before?
If yes can you post output for this command?
rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n'|grep -i 'libxp'

Error while installing oracle 10g on centos 5.6 32 Bit

Hi All,
Please help me with the issue I facing while installing oracle 10g on centos 5.6 32bit. I did lot of research on google but I am getting same answer...the libXp package is missing, but I have check it...its already installed.
[root@staging ~]# find / -name libXp.so.6
/usr/lib/libXp.so.6
/usr/lib64/libXp.so.6
echo $DISPLAY
<ipaddress>:0.0
[oracle@staging database]$ DISPLAY=<ipaddress>:0.0; export DISPLAY
[oracle@staging database]$ id
uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba) context=root:system_r:unconfined_t:SystemLow-SystemHigh
Below is the error message I am getting :
oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-37-17PM. Please wait ...[oracle@staging database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-27_05-37-17PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(Unknown Source)
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at sun.security.action.LoadLibraryAction.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
     at sun.awt.DebugHelper.<clinit>(Unknown Source)
     at java.awt.Component.<clinit>(Unknown Source)
I found some suggestion on google and tried to not use ip address in DISPLAY settings...
if I am using 0.0 instead of IP below eg.
[oracle@staging database]$ DISPLAY=:0.0; export DISPLAY
The error I am receiving differnt error
[oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-34-40PM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:      $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
     echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
     echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
     % <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
[oracle@staging database]$ echo $SHELL
/bin/bash
Please help me.

satish.ygl wrote:
Hi,
I am getting the same error when i am applying patchset to 10201 to 10204. I am using RedHat Linux 4 version and I tried set $DISPLAY=<hostname/ip address>:0.0 and export=DISPLAY
#xhost + and checked $PATH this is also is correct
I did these steps still i am getting the following error
pen an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
Please help me in this scenario.
thank You,
Sri
Edited by: satish.ygl on Oct 30, 2012 7:49 PMyou must log onto the DB Server as below (or functional equivalent)
ssh -X oracle@DB_Server
& the first & only command after logging onto the DB Server should be as below
xclock
If/when xclock fails, then OUI will fail.

Error while installing oracle 10g on AIX

I am receiving the following error while installing oracle 10g on AIX..
error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
i am installing enterprise edition. pl help

Hi;
What is AIX version?
Please see:
Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
"Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
Please also check below and be sure you have all prereq. on your server:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

I want to install oracle 10g on linux.

i want to install oracle 10g on linux. my linux is red hat enterprise linux AS release 4. i downloaded 10201_database_linux_x86_64.cpio.gz. now, cksum 10201_database_linux_x86_64.cpio.gz shows 4294967295 while site says 2921604215. if i say gunzip /home/oracle/10201_database_linux_x86_64.cpio.gz gunzip: /home/oracle/10201_database_linux_x86_64.cpio.gz: unexpected end of file. now, please clear these doubts and also give me the link to steps on how to install. tnx

I tried with the following command and it works for me:
cpio -idcmv < 10*
without gzip before

Compilation Errors "skipp incompatible" installing oracle 10g on linux 64z9

Hello Friends,
I have errors while installing Oracle 10g 10.2.0 for z9 Systems on a IBM Z/OS System with a SLES 10 Linux for z9 (64bit System).
The Problem:
Some programs of oracle cause errors while compiling libraries.
The Error:
------------ With LD_LIBRARY_PATH set to $ORACLE_HOME/lib (which contains 64bit libs) -------------------
(13:54) [oracle@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/bin
[b]> ./genclntsh
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl.so when searching for -ldl
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libm.so when searching for -lm
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libnsl.so when searching for -lnsl
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/librt.so when searching for -lrt
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/libclient10.a(obindps.o): relocation R_390_PC32 against `ocibndps' can not be used when making a shared object; recompile with -fPIC
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: final link failed: Bad value
collect2: ld gab 1 als Ende-Status zurück
genclntsh: Failed to link libclntsh.so.10.1
------------ With LD_LIBRARY_PATH set to $ORACLE_HOME/lib32 (which contains 32bit libs) ------------------
(13:54) [oracle@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/bin
export LD_LIBRARY_PATH=/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32(13:54) [oracle@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/bin
./genclntsh/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl.so when searching for -ldl
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libm.so when searching for -lm
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libnsl.so when searching for -lnsl
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/librt.so when searching for -lrt
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/libclient10.a(obindps.o): relocation R_390_PC32 against `ocibndps' can not be used when making a shared object; recompile with -fPIC
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: final link failed: Bad value
collect2: ld gab 1 als Ende-Status zurück
genclntsh: Failed to link libclntsh.so.10.1
(13:54) [oracle@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/bin
Questions:
1) LD_LIBRARY_PATH doesn´t change any behavior of oracle - means the lib-path used stays on the 64bit directory. WHY?
2) All necessary packages are installed (checked with Oracle Admin Docu!). All other devel and lib and compile and stuff packages are installed as 64 and 32 bit version. OK Nearly every f*#(#*_ package which has something to do with compilation and make processes is installed. COULD SOMETHING BE STILL MISSING?
3) What do I have to change to get compilation with 32bit?
4) Is it reasonable to compile with 32bit ? I think it isn´t.
4) This is a S390 System so are there any special libs or patches to install for Oracle?
5) Where are the 64bit libs for oracle ??????? (See below)
What I found out:
The libraries in $ORACLE_HOME/lib and ../lib32 are both 32 bit .... ????? WHY? Not wondering its incompatible.
(13:56) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle
find /ASLing01/opt/apps/oracle10g/app/oracle -name "libdl*"/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl-2.3.2-stub.so
/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl.so
/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl.so.2
/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl-2.3.2-stub.so
/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl.so
/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl.so.2
(14:37) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle
file /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl.so/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl.so: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), not stripped
(14:39) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle
file /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl.so/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl.so: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), not stripped
(14:40) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle
file /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl-2.3.2-stub.so/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl-2.3.2-stub.so: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), not stripped
(14:40) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle
file /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl.so.2/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl.so.2: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), not stripped
(14:40) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle[ i]
Libraries are loaded from system as follows:
[i](14:37) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle
ldconfig -p|grep -i libnsllibnsl.so.1 (libc6,64bit, OS ABI: Linux 2.6.4) => /lib64/libnsl.so.1
libnsl.so.1 (libc6, OS ABI: Linux 2.6.4) => /lib/libnsl.so.1
libnsl.so (libc6,64bit, OS ABI: Linux 2.6.4) => /usr/lib64/libnsl.so
libnsl.so (libc6, OS ABI: Linux 2.6.4) => /usr/lib/libnsl.so
ldconfig -p|grep -i libdllibdl.so.2 (libc6,64bit, OS ABI: Linux 2.6.4) => /lib64/libdl.so.2
libdl.so.2 (libc6, OS ABI: Linux 2.6.4) => /lib/libdl.so.2
libdl.so (libc6,64bit, OS ABI: Linux 2.6.4) => /usr/lib64/libdl.so
libdl.so (libc6, OS ABI: Linux 2.6.4) => /usr/lib/libdl.so
Thanks for help!
Markus
Message was edited by:
user579884

Not very helpful, but SLES10 is NOT certified on this platform, only SLES9.
Werner

After installing oracle 10g on linux im getting this error

Hi,
Can any one give me any solution on i getting an error after installing oracle 10g on linux.
ERROR:-
/oraeng/app/oracle/product/10.2.0/bin/clscfg: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Failed to initialize Oracle Cluster Registry for cluster

Hi, please ensure that both 'libclntsh.so.10.1' and 'libttsh10.so' has 755 permission and owned by Oracle.
That is the critical step.
After re-execute the root.sh file
Has been known to reset the permissions from the previous step - bug in some patch releases.
Suggest OP records permissions for those two files before running root.sh Or run root.sh before setting the permissions.

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

How can i install oracle 10g on linux cluster

Dear all:
please advice How can i install oracle 10g on linux cluster service ..
thanks ,,

Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node.

"Error In Writing to directory ..." getting the error while installing oracle 10g in laptop

Hi
I thought I'd make my first post a hijack of a vaguely related thread,
then some kind moderator could separate it out and branch it off to a post of its own.
I'm not even sure this is in the proper forum.
But anyhow ...
i am getting problem while installing oracle 10g in laptop its showing error as "Error in Writing to Directory C:\Users\Accent.Muthu\Appdata\Local\temp\OraInstall2011-03-03-10-51-53 AM.
Please ensure that the directory is writable and has atleast of 45 MB of disk space.Installation can not continue.
so please tell me the solution as soon as possible
thanks,
arshad ayub

Try the few resolutions mentioned here -
forms 10g installation error in writing to directory
Specially -
do not try to install from directory which has a space in its path
TMP and TEMP environment variables are set correctly, preferably to C:/tempRegards,
Anuj

Error while installing developer 10g on linux suse 10.0

Hi All,
This error appears while installing developer 10g on linux suse 10.0
http://img179.imageshack.us/my.php?image=errorso9.png

Try locate (using find command for example) the libjvm.so file (I assume that is located somewhere under $ORACLE_HOME (probably jdk or jre directory)). If you locate the path where this library resides, try to add that path to $LD_LIBRARY_PATH enviroment variable.
Use copy&paste method (for error message) rather than link to image.
It is much quicker operation and it may help to other people because they be able to find this thread via search engine.

An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PM

Hi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath

Problem to install oracle 10g on linux

Hi,
I want to install Oracle 10g on Linux
(I have Linux X76CLLCFAUU 2.6.18-194.17.1.el5 #1 SMP Mon Sep 20 07:12:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux)
, when i run ./runInstaller, i have the following error , do you known what is the problem :
DÃ©marrage d'Oracle Universal Installer...
VÃ©rification des exigences du programme d'installation...
VÃ©rification de la version du systÃ¨me d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<
Fermeture d'Oracle Universal Installer ; le journal de cette session figure Ã l'emplacement /tmp/OraInstall2010-11-17_05-03-15PM/installActions2010-11-17_05-03-15PM.log

Hello,
VÃ©rification de la version du systÃ¨me d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<So, when the Installer checked the OS Release, it didn't find the correct one.
The message said that you should have one of this OS:
Redhat-3, SuSE-9, Redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2As previously posted, you should check from the Installation Guide that you have the right OS requirements before running the Installer.
Hope this help.
Best regards,
Jean-Valentin

Getting Error while installing oracle 10g 1.0.2.0 on Redhat - linux 64bit

I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.

865231 wrote:
I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.I thought the error message gave the advice already:
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.Looks like you canceled the pop up to configure your tns files. No harm, your database created just fine, but probably didn't configure listener.ora, sqlnet.ora, and tnsnames.ora. Just run netca and finish the tns confiiguration.

Oui-10207error while installing oracle 10g on linux in vmware

Similar Messages

Maybe you are looking for