OUI-25023 Error when trying to upgrade 10.1.0.3 CRS to 10.2.0.1 Clusterware

Hi all,
I'm trying to upgrade my RAC installation.
To test and validate the procedure, i'm first trying it on a one node cluster (node named camrdo01) running on 10.1.0.3 (CRS & Database).
When i'm lauching OUI for the Clusterware 10.2.0.1 installation, on the node selection screen, the node is present and selected, but I can't go on, i'm getting an OUI-25023 Error.
Here is the log from this installation:
INFO: Node selection page will be shown because a cluster install is detected on the selected home.
INFO: Setting variable 'CLUSTER_NODES' to 'CAMRDO01,'. Received the value from a code block.
INFO: The cluster node list 'CAMRDO01' is derived from the Oracle home properties.
INFO: Local node 'camrdo01' is derived from the clusterware stack.
INFO: Setting variable 'LOCAL_NODE' to 'camrdo01'. Received the value from a code block.
INFO: isRollingUpgradeEnabled():true
INFO: Rolling upgrade is enabled for this product.
INFO: Setting variable 'REMOTE_NODES' to 'CAMRDO01,'. Received the value from a code block.
INFO: isRollingUpgradeEnabled():true
INFO: Setting the 'ClusterInstallDescription' property to 'Select nodes (in addition to the local node) in the hardware cluster where the installer should install products that you select in this installation.'.
INFO: Setting the 'SingleInstanceDescription' property to 'Select this option if you want to perform a single node non-cluster installation even though the local node is part of a hardware cluster.'.
INFO: Setting the 'InvalidNodes' property to 'null'.
INFO: Setting the 'AllowRemoteNodeSelection' property to 'true'.
INFO: Setting the 'ShowCRSSoftwareVersion' property to 'false'.
INFO: Setting the 'NewHome' property to 'false'.
INFO: Setting the 'ClusterNodes ( CLUSTER_NODES )' property to 'CAMRDO01,'. Received the value from the UI page.
INFO: Setting the 'LocalNode ( LOCAL_NODE )' property to 'camrdo01'. Received the value from the UI page.
INFO: Setting the 'RemoteNodes ( REMOTE_NODES )' property to 'CAMRDO01,'. Received the value from the UI page.
INFO: Performing tests to see whether nodes CAMRDO01 are available
SEVERE: OUI-25023: The local node is not selected for installing this product. Include the local node in the cluster list or perform the installation on the nodes on which the install is to be performed.
INFO: User Selected: Yes/OK
Does anyone have tryed and succeded in upgradnig 10.1.0.3 RAC to 10.2.0.1, and is there any workaround for this problem?
thx for help,
Siftin

Can you check the install log to see if any errors are recorded there ?
http://download.oracle.com/docs/cd/B14117_01/em.101/b12140/A_oui_troubleshooting.htm#sthref268
HTH
Srini

Similar Messages

There is an error when trying to upgrade to Mavericks from OX Lion

There is an error when trying to upgrade to Mavericks from OX Lion

So whenever i click on "free upgrade" ..that message shows up next to it..

I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

You can also use Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
Direct Download Links for Adobe Software
Are you on a managed network. If yes please refer the Knowledge base article: http://helpx.adobe.com/creative-cloud/help/cc-desktop-download-error.html.
You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html.
Kindly follow the very important instructions before download.
It might help you.
Regards
Rajshree

Error when trying to upgrade scsm dw 2012 sp1 to r2

Hello,
when I trying to install scsm 2012 r2 upgrade on my scsm dw server error appears.
does anyone faced and successfully resolved this problem?
regards,
Ilgar
Regards, Ilgar Khalilov.

This issue might happen if you have a space in the DW Management Group name.
Maybe this blog post from Anders Asp is helpful:
Strange error message when trying to upgrade SCSM 2012 Sp1 to SCSM 2012 R2
Andreas Baumgarten | H&D International Group

Error when trying to upgrade Dreamweawer

Getting this log message when trying to upgrade:
Dreamweaver CS5.5 11.5.3 Updater
Installationen misslyckades. Felkod: U44M1P7
please advice

NIcolas, Looks like one of th eupgrde steps failed. You will have to open a tac case here as most likely tac will need to get into expert mode adn make some changes to permit you to complete the install. Matthew

I get a disk error when trying to upgrade to mountain lion on my mac book pro that also runs bootcamp

I recently tried to upgrade my macbook pro OSX to mountain lion via the app store. When it tried to install it gives me a disk error. I have run disk utilities and repaired, verified etc. but it makes no difference. I am running bootcamp as well and have tried to modifiy the partition sizes in disk utilities, but it says for both that they cannot be modified. I can switch my startup disk and reboot in windows, no problem, so getting my files off isnt the issue. I have also tried to recover the hard disk using time machine which i was lucky enough to backup the day before it all went wrong. However, time machine runs fine until it asks me which disk to recover and it gives me an option of the time machine disk or bootcamp, but no option for my mac partition. So, I have tried everything that makes snese, but getting errors with disks lock, cant repartition, disk error needs repair (which i know is not true, its only because of the Mountain Lion OSX that its messed up). Any ideas?

You have some other problem with your boot drive that has corrupted data backed up to the TimeMacine drive.
My advice is to boot into each operating system and manually backup just your Users files each to separate regular external drives (no Timemachine or backup software) and disconnect.
Make a note of any serial numbers, emails, address book contacts, export bookmarks etc. that isn't typically in your users folders data.
You might be able to Winclone 3 the Windows as a whole thing as it's appearing not to have issues but it's your MacintoshHD partition that is so that will have to be rebuilt from scratch.
Most commonly used backup methods
If your OS X parititon doesn't boot, you can use this to recover files.
Create a data recovery/undelete external boot drive
Without any further detail about your machine I can't advise specifically what to do, but it involves using Disk Utility to Zero Erase (move slider one spot to the right or in 10.6 using Security Option) the ENTIRE boot drive and reformatting, then installing OSX fresh and then setting up BootCamp again.
If you wish to switch your boot drive for something better, this is a good time to do this.
Install/upgrade RAM or storage drive in Mac's
If your machine is capable of Internet Recovery, then use that, then upgrade.
If your machine came with 10.6 or earlier, then use the 10.6 install disks and work up from there.
Erase, formatting, OS X installs on Mac's

Error when trying to upgrade SQL Azure database using DAC Package in MGMT Studio - "Unexpected XML Content"

Hi there,
I am trying to upgrade a database running in SQL Azure from my local dev box which is running SQL Server 2008 R2 Sp1 (Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64))
I extract the dac with no problems from my local database. However, when I try to upgrade the Azure db I get the below error.
This error occurs just after I browse to select the dac package and click open in the browse window. I.e. It happens before I actually try and apply this dac to the Azure database. Something is going wrong, presumably, when the package is parsed by management
studio.
I am running Visual Studio 2010 Premium Sp1 if that matters, plus all the various updates required for Azure development..
Thanks for your help!

Hey there, and apologies for the lack of response. Are you still having this issue and still needing help?
Thanks Guy

Receive TNS error when trying to upgrade DB

I receive a TNS error when I try to upgrade a database using the Database Upgrade Assistant. I want to upgrade to 9.2 from 8.1.7. When I click on the database I want to upgrade I receive the TNS error. It never prompts for a username/password@cstring.
I am trying to run this through Windows Terminal Service, is this the problem? I know there are issues trying to run server manager through WTS.
Thanks,
Jim

I'm new to this, but between Oracle 9.0 and 9.2 the required format appears to have changed for the "TNS Service Name" parameter for a "System DSN" in the Windows "ODBC Data Source Administrator". In 9.0 the "TNS Service Name" can be in either of two formats: global_database_name OR oracle_home$global_database_name. One can verify this by clicking the "Test Connection" button on the the "Oracle ODBC Driver Configuration" screen from the "ODBC Data Source Administrator" window. On a 9.2 system only the first format works. I tested this on freshly-installed systems, each with just one Oracle home and the default sample database.
Perhaps this is related to the problem you are encountering. I was able to fix a problem connecting to 9.2 by changing the "TNS Service Name" parameter. The error I was receiving was: "[Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve service name".
Can anyone point me to some documentation on this apparent change between 9.0 and 9.2? Thanks in advance.

Get error when trying to upgrade to IOS5 - An error occured while trying to Back up ipad -402653138

Help
I am trying to upgrade to IOS5 and i cant get past the backup step of the upgrade - I keep getting An error occured while trying to Back up ipad (-402653138). I have tried removing my current backup and letting the update do the backup but still get same message.
I also get a warning right when I start the upgrade process that says I have purchased apps that have not been transfered and wants to know if I want to continue??? Not sure why I get this warning - I have ran the transfer purchases option several times and it seems to work. However, if I go under store and look at the purchases for my ipad it dosnt show any??? I would assume it should?
I have tried syncing and backing up, rebooting, all latest versions of itunes, etc.
Any ideas or help would be much appreciated.
Thanks
Erik

I took a leap of faith and finally got the update with no issues. Here's what I did:
First did yet another backup. Next, disabled all anti-virus and anything related (running Norton 360). Next, turned off Home Sharing.
Instead of "Update" I selected "Restore". Followed prompts as though I wanted to restore and update. Selected my latest backup and off it went. First did the wipe, then ios5 update, then restarted and began to sync. Sync took about 2 hours as I have lots of apps, photos and some TV shows I forgot were on there.
In the end, I had the exact same configuration. All apps on their pages as before the update, all folders intact and even all game scores and data from apps. Hurray!
Now just going through the App update process of the many (85) that showed up in App Store icon.
Hope this helps!

Unsupported File System Error When Trying To Upgrade iPhoto Library on QNAP

I upgraded to iLife11 from iLife08. My iPhoto Library is stored on a QNAP server and has worked just fine for many years. When iPhoto[9] tries to upgrade the library it gives an error "The library could not be opened because the file system of the library's volume is unsupported."
Other iLife11 applications such as iMovie recognize files from the QNAP just fine.
I have tried moving the original iPhoto Library into another folder and then creating a new library on the server but get the same message.
I have upgraded to iPhoto 9.0.1 already.
Any ideas?
Appreciation In Advance.

my NAS backup is going to see the whole disk image as a 'new file' and
I don't think that will be the case if you use a sparse bundle disk image.
+A sparse bundle is essentially the same as a sparse disk image. The difference is that a sparse image is one giant file on your disk and a sparse bundle is lots of small files (8 megabytes each). They work and look the same way, but you can right-click on a sparse bundle, select "show package contents" and see the individual 8 meg sections.+
If the backup software can do incremental backups and work on packages I think it will work on the sparse bundle disk image. Might be worth a try.
Happy New Year

Error when Trying to Upgrade from 8.1.7.4 to 10.2.0.3

Hello -
I am getting this error, when attempting to run the ultu102i script in preparation for an upgrade to 10g:
SQL> @utlu102i
DECLARE
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 1560
I have upgraded many databases to 10g from 8i, and have never seen this error before. I have the database started as 8i, and my environment set up as 8i (ORACLE_HOME, etc), and then I try to run teh utlu102i script that is within the /rdbms/admin directory of the 10g software home location.
Any ideas are greatly appreciated.
Thanks!

edit the utlu102i and utl102x.sql scripts and comment out the following two statements.
SELECT value INTO db_undo FROM v$parameter
WHERE name = 'undo_management';
SELECT value INTO db_undo_tbs FROM v$parameter
WHERE name = 'undo_tablespace';
this ones in metalink, i came accross it when upgrading to 10.2.0.3 i think its a new bug in this pathcset.
metalink noteid is: 407031.1
Message was edited by:
chris_c

Mac OS X v10.7 Lion Itunes errors when trying to upgrade iphone

Trying to update my ipad and iphone to IOS 5. When I try to update I get an error message that my Iphone and/or ipad COULD NOT BE RESTORED. THIS DEVICE ISN"T ELIGIBLE FOR THE REQUESTED BUILD.
Itunes software is updated
This all started when I upgraded my mac to Lion OS X Ver 10.7.2
Need help please

I'm connected through my Sky Wifi, it's extremely quick, and I don't have any problems with it. Yes it asked me for my Account Email, and password as normal, then it did that little annimation where it flys into the Launch Pad, then it's saying "waiting" where it should be saying downloading.

Error when trying to upgrade a project to RH9

I'm attempting to upgrade a project from RH 8.0.2 to RH9. My other projects have upgraded fine but I have one particular project that is giving me the following error:
Error - node %Rel_420_NeoTool_Product_Help/rhsharedresource.apj already exists.
I have the source of the projects kept in RoboSource so after I click OK, I get the following message:
Cannot check out all the files that needed to upgrade this project.
I noticed that this file does not reside in source so I figured that RoboHelp created it so I tried to delete it but am getting the same error.
Any ideas would be greatly appreciated.
Thanks

Thank you Mona for your suggestion. Unfortunately it didn't work. The rhsharedresource.apj & SearchOptions.xml files do not exist in source in either the root or the branch but I deleted them from both local projects (root and the branch) and attempted the upgrade and received the same error message.
Answers to your questions:
Steps I took to upgrade
I upgraded the root project first by opening the project on my local machine and when presented with the dialog that this project was created in an older version of RoboHelp, I selected the Upgrade button.
RoboHelp automatically checked the files out of source and performed the upgrade and all was well with the root.
Next I opened the branch on my local machine using RoboHelp.
When I received the message that it was created in an older version, I again selected Upgrade.
It churned for a short time and the bottom of the RoboHelp window says, "Adding Files(s) to Version Control Project" then I get the error message that rhshaerdresoruce.apj already exists.
When I click OK on the error dialog, I get another error dialog that says "Cannot checkout all teh fiels that needed to upgrade this project"
Checking out of source
Based on your questions regarding starting from source I tried the following experiment which also unfortunately didn't work:
I checked the entire branch project out of RoboSource before attempting to upgrade.
Deleted the rhsharedresource.apj and SearchOptions.xml file from the local version.
Opened it in RoboHelp and selected to Upgrade when presented with the dialog that the project was created in an older version of RoboHelp.
I received the same error messages.
Branch Properties
I'm not entirely sure what you mean by Branch Properties but here is a screen capture of the Settings tab. On the Rights tab all items are checked. There is nothing in Notes. The Local Path tab has the location of my local copy. The Links tab lists my root project $/Operations Monitor_help
Thank you for your assistance,
Nita

0xc1900101 0x40017 error when trying to upgrade to windows 8.1

after trying 4 months to find an answer for upgrading to 8.1 i have tried every thing i have seen or read from disabling my antivirus to checking all updates are correct still i am getting error code i was getting a different code that one is now sorted
now i am getting 0xc190010 0x440017 and then restores previous windows everything i have tried i have a ASUS notebook is there something i am missing and if so is there any step by step on how to fix all drivers are updated all updates even hidden updates
are updated the only thing i havent tried is there was a post on disableing the SQL only i couldnt find where it was as it Was not in the system configeration though iT is in the programs PLEASE HELP

Hi,
The cause for error 0xC1900101 – 0x40017 is known to be faulty drivers, so have you tried solutions mentioned in the link below? What is the result?
Error 0xC1900101 – 0x40017 when installing Windows 8.1
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/error-0xc1900101-0x40017-when-installing-windows/8c893ae6-0e9b-4b7d-a647-b9065099efd6
Yolanda Zhu
TechNet Community Support

Why am i getting an error when trying to upgrade from 10.7.5 to 10.9

when i try and upgrade from 10.7.5 osx lion to 10.9 i get an error, i have 2GB of memory and 144MB of storage. can someone help?

This would indicate that your MacBook Air does not meet the requirements for Mavericks.
To install Mavericks, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory
8 GB or more of available space

OUI-25023 Error when trying to upgrade 10.1.0.3 CRS to 10.2.0.1 Clusterware

Similar Messages

Maybe you are looking for