OUI-25031
Hi everyone!
I am trying to install Oracle Gateway 11 in its own Oracle Home (not in the existing Oracle Home which is in 10g).
Oracle's version: Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
Windows Server 2008 R2
I am keep receiving this error:
OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.The full details are as given here
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = C:\Windows\system32\cmd /c call D:\oracle\product\10.2.0\db_2/bin/netca.bat /orahome D:\oracle\product\10.2.0\db_2 /orahnam OraDb10g_home2 /instype custom /inscomp client,oraclenet,server /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /responseFile D:\oracle\product\10.2.0\db_2\network\install\netca_typ.rsp
Error: Environmental error detected: Oracle Home is set to "D:\oracle\product\10.2.0\db_1" in the environment is different from Oracle Net Configuration Assistant installed Oracle Home.
Verify that the ORACLE_HOME environment variable or registry setting is set to correct value and relaunch Oracle Net Configuration Assistant.
Oracle Net Services configuration failed. The exit code is 1
Configuration assistant "Oracle Net Configuration Assistant" failed
The "D:\oracle\product\10.2.0\db_2\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = C:\Windows\system32\cmd /c call D:\oracle\product\10.2.0\db_2/bin/netca.bat /orahome D:\oracle\product\10.2.0\db_2 /orahnam OraDb10g_home2 /instype custom /inscomp client,oraclenet,server /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /responseFile D:\oracle\product\10.2.0\db_2\network\install\netca_typ.rsp
Error: Environmental error detected: Oracle Home is set to "D:\oracle\product\10.2.0\db_1" in the environment is different from Oracle Net Configuration Assistant installed Oracle Home.
Verify that the ORACLE_HOME environment variable or registry setting is set to correct value and relaunch Oracle Net Configuration Assistant.
Oracle Net Services configuration failed. The exit code is 1
Configuration assistant "Oracle Net Configuration Assistant" failed
The "D:\oracle\product\10.2.0\db_2\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------How should I go about this? Please guide me.
THanks in advance.
Hello,
I am trying to install oracle 10g R2 in linux RHEL 6.1 but i am receiving few error as stated below.
Error in invoking target 'ioracle' of makefile /oracle/product/10.2.0/db_1/rdbms/lib/ins_rdbms.mk
Error in invoking target 'clientonlyinstall' of makefile
/oracle/product/10.2.0/db_1/ldap/lib/ins_ldap.mk
Error in invoking target 'install' of make file
/oracle/product/10.2.0/db_1/ctx/lib/ins_ctx.mk
Error in invoking target 'agent nmo nmb' of make file
/oracle/product/10.2.0/db_1/sysman/lib/ins_sysman.mk
Error in invoking target 'all_no_orcl' of make file
/oracle/product/10.2.0/db_1/rdbms/lib/ins_rdbms.mk
I have skipped all these error and finally when i type in dbca i am getting the below linking error,
UnsatisfiedLinkError exception loading native library: njni10
I want to know if this is basically because of the RHEL6.1 which is not compatible for Oracle10gR2.
Can anyone reply to this?
Similar Messages
-
OUI-25031 error in Oracle 10.2.0.1 on RHEL 5
Hi,
i am installing Oracle 10G(10.2.0.1) in RHEL 5. The Netconfiguration assistent is not getting installed due to the OUI-25031 error. Is that a bug?? or Do i need to change any OS configuration???
Regards,
007Pl post the complete error message, along with the last 100 lines from the install log.
http://download.oracle.com/docs/cd/B19306_01/install.102/b15660/app_ts.htm
Pl confirm you meet all needed pre-reqs for the install
http://download.oracle.com/docs/cd/B19306_01/install.102/b15660/pre_install.htm
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15659/toc.htm#CHDFHIEA
HTH
Srini -
OUI-25031 during oms configuration in grid control
Hello,
I am installing EM 10.2.0.1 grid control using a new database on Enterprise linux 4.2. The installer keeps failing with OUI-25031 at the OMS configutaion assistant.Hello,
I am trying to install oracle 10g R2 in linux RHEL 6.1 but i am receiving few error as stated below.
Error in invoking target 'ioracle' of makefile /oracle/product/10.2.0/db_1/rdbms/lib/ins_rdbms.mk
Error in invoking target 'clientonlyinstall' of makefile
/oracle/product/10.2.0/db_1/ldap/lib/ins_ldap.mk
Error in invoking target 'install' of make file
/oracle/product/10.2.0/db_1/ctx/lib/ins_ctx.mk
Error in invoking target 'agent nmo nmb' of make file
/oracle/product/10.2.0/db_1/sysman/lib/ins_sysman.mk
Error in invoking target 'all_no_orcl' of make file
/oracle/product/10.2.0/db_1/rdbms/lib/ins_rdbms.mk
I have skipped all these error and finally when i type in dbca i am getting the below linking error,
UnsatisfiedLinkError exception loading native library: njni10
I want to know if this is basically because of the RHEL6.1 which is not compatible for Oracle10gR2.
Can anyone reply to this? -
Getting OUI 25031 while installing Oracle 11gR1
Getting error below while installing oracle
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/u01/app/oracle/product/11.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
-----------------------------------------------------------------------------More information is below.
Oracle install logs are below. As well as the system parameters.
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = oracle.assistants.server.DbcaCfgPlugIn /u01/app/oracle/product/11.1.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -sid ora11g -gdbName ora11g.ljc.com -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/11.1.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.1.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE -totalMemory 403 -automaticMemoryManagement true -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Command = oracle.assistants.server.DbcaCfgPlugIn has failed
Exception : java.lang.OutOfMemoryError: Java heap space
INFO: Configuration assistant "Oracle Database Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /u01/app/oracle/product/11.1.0/db_1
Configuration directory is set to /u01/app/oracle/product/11.1.0/db_1/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is /u01/app/oracle/product/11.1.0/db_1/oui/bin/runConfig.sh ORACLE_HOME=/u01/app/oracle/product/11.1.0/db_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home /u01/app/oracle/product/11.1.0/db_1 we use the runConfig Command instead of the plugin's command
INFO: Created a new file /u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands
INFO: Since the option is to overwrite the existing /u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /u01/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
[oracle@localhost logs]$ cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5 (Tikanga)
[oracle@localhost logs]$ grep MemTotal /proc/meminfo
MemTotal: 1035400 kB
[oracle@localhost logs]$ grep SwapTotal /proc/meminfo
SwapTotal: 2031608 kB
[oracle@localhost logs]$ df -h /dev/shm
Filesystem Size Used Avail Use% Mounted on
tmpfs 506M 310M 197M 62% /dev/shm
[oracle@localhost logs]$ df -h /tmp
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
29G 11G 18G 38% /
[oracle@localhost logs]$ df -h /u01
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
29G 11G 18G 38% /
[oracle@localhost logs]$ uname -r
2.6.18-8.el5
[oracle@localhost logs]$ cat /etc/sysctl.conf | grep kernel
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
kernel.core_uses_pid = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 4294967295
kernel.shmall = 268435456
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
[oracle@localhost logs]$ cat /etc/sysctl.conf | grep fs
fs.file-max = 6815744
[oracle@localhost logs]$ cat /etc/sysctl.conf | grep net.ipv4
net.ipv4.ip_forward = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.tcp_syncookies = 1
net.ipv4.ip_local_port_range = 1024 65500
[oracle@localhost logs]$ cat /etc/sysctl.conf | grep net.core
net.core.rmem_default = 4194304
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048576
[oracle@localhost logs]$ cat /etc/security/limits.conf | grep oracle
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
[oracle@localhost logs]$ -
OMS Config Assistant fails with OUI-25031
Hello,
I am trying to install OEM 10.2.0.1 GC on a Solaris 5.10 (Solaris 5.9 too) box, using an existing DB which is a 10.1.0.4 on HPUX Itanium 11.23.
It keeps failing with OUI-25031 at the OMS Config. Assistant.
I have tried all the suggestions:
- SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
- setting the locale to C in the /etc/default/init file
- using IP instead of hostname
Has anyone found the solution to this?
Thanks,
GinaDamien,
Yes, during the install I entered the full path.
mnazim,
Here is the log. FYI: this is an HA env. The virtual host is vhoem. The physical host is phoem1.
---CfmLogger...log----
INFO: Creating new CFM connection
INFO: Creating a new logger for encap_oms
INFO: Unmarshalling /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML/encap_oms.1_0_0_0_0.xml
INFO: Creating a new logger for oracle.sysman.top.oms
INFO: Unmarshalling /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML/oracle.sysman.top.oms.10_2_0_1_0.xml
INFO: Creating a new logger for oracle.sysman.top.agent
INFO: Unmarshalling /data1/app/oem/10.2/agent10g/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.10_2_0_1_0.xml
INFO: Creating a new logger for oracle.calypso
INFO: Unmarshalling /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML/oracle.calypso.10_1_2_1_0.xml
INFO: Creating a new logger for oracle.java.j2ee.iascfg
INFO: Unmarshalling /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML/oracle.java.j2ee.iascfg.10_1_2_1_0.xml
INFO: Creating a new logger for oracle.apache.apache
INFO: Unmarshalling /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML/oracle.apache.apache.1_3_31_0_0.xml
INFO: Creating a new logger for oracle.oid.oradas
INFO: Unmarshalling /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML/oracle.oid.oradas.10_1_2_1_0.xml
INFO: Creating a new logger for oracle.iappserver.iasobject
INFO: Unmarshalling /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML/oracle.iappserver.iasobject.10_1_2_0_2.xml
INFO: Creating a new logger for oracle.apache
INFO: Unmarshalling /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML/oracle.apache.10_1_2_1_0.xml
INFO: Creating a new logger for oracle.iappserver.iapptop
INFO: Unmarshalling /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML/oracle.iappserver.iapptop.10_1_2_0_2.xml
INFO: Creating a new logger for oracle.rdbms.jazn.config
INFO: Unmarshalling /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML/oracle.rdbms.jazn.config.10_1_2_0_2.xml
INFO: Creating a new logger for oracle.iappserver.repository.api
INFO: Unmarshalling /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML/oracle.iappserver.repository.api.10_1_2_0_2.xml
INFO: Creating a new logger for oracle.iappserver.iappcore
INFO: Unmarshalling /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML/oracle.iappserver.iappcore.10_1_2_0_2.xml
INFO: No description found in /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML for aggregate=oracle.sysman.top.agent
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /data1/app/oem/10.2/oms10g/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /data1/app/oem/10.2/agent10g/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Aggregate Description encap_oms:1.0.0.0.0:common successfully loaded
INFO: Aggregate Description oracle.sysman.top.oms:10.2.0.1.0:common successfully loaded
INFO: Aggregate Description oracle.sysman.top.agent:10.2.0.1.0:common successfully loaded
INFO: Aggregate Description oracle.calypso:10.1.2.1.0:common successfully loaded
INFO: Aggregate Description oracle.java.j2ee.iascfg:10.1.2.1.0:common successfully loaded
INFO: Aggregate Description oracle.apache.apache:1.3.31.0.0:common successfully loaded
INFO: Aggregate Description oracle.oid.oradas:10.1.2.1.0:common successfully loaded
INFO: Aggregate Description oracle.iappserver.iasobject:10.1.2.0.2:common successfully loaded
INFO: Aggregate Description oracle.apache:10.1.2.1.0:common successfully loaded
INFO: Aggregate Description oracle.iappserver.iapptop:10.1.2.0.2:common successfully loaded
INFO: Aggregate Description oracle.rdbms.jazn.config:10.1.2.0.2:common successfully loaded
INFO: Aggregate Description oracle.iappserver.repository.api:10.1.2.0.2:common successfully loaded
INFO: Aggregate Description oracle.iappserver.iappcore:10.1.2.0.2:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Successfully returning from CfmFactory.connect()
INFO: encap_oms:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: encap_oms:1.0.0.0.0:common:fami
ly=CFM:oh=/data1/app/oem/10.2/oms10g:label=-1}
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microS
tep=0
WARNING: Unexpected value for property os.name=SunOS; using "env" to retrieve environment variables
INFO: oracle.java.j2ee.iascfg:About to execute plug-in OC4J Configuration Assistant
INFO: oracle.java.j2ee.iascfg:The plug-in OC4J Configuration Assistant is running
INFO: oracle.java.j2ee.iascfg:Launching CmdExec
INFO: oracle.java.j2ee.iascfg:ExitCode=0
INFO: oracle.java.j2ee.iascfg:The plug-in OC4J Configuration Assistant executed as attached=true in separate process with exitcode=0
INFO: oracle.java.j2ee.iascfg:The plug-in OC4J Configuration Assistant has successfully been performed
INFO: oracle.apache.apache:About to execute plug-in HTTP Server Configuration Assistant
INFO: oracle.apache.apache:The plug-in HTTP Server Configuration Assistant is running
INFO: oracle.apache.apache:Launching CmdExec
INFO: oracle.apache.apache:ExitCode=0
INFO: oracle.apache.apache:The plug-in HTTP Server Configuration Assistant executed as attached=true in separate process with exitco
de=0
INFO: oracle.apache.apache:The plug-in HTTP Server Configuration Assistant has successfully been performed
INFO: oracle.rdbms.jazn.config:About to execute plug-in Java Security Configuration Assistant
INFO: oracle.rdbms.jazn.config:The plug-in Java Security Configuration Assistant is running
INFO: oracle.rdbms.jazn.config:Launching CmdExec
INFO: oracle.rdbms.jazn.config:ExitCode=0
INFO: oracle.rdbms.jazn.config:The plug-in Java Security Configuration Assistant executed as attached=true in separate process with
exitcode=0
INFO: oracle.rdbms.jazn.config:The plug-in Java Security Configuration Assistant has successfully been performed
INFO: oracle.calypso:About to execute plug-in Web Cache Configuration Assistant
INFO: oracle.calypso:The plug-in Web Cache Configuration Assistant is running
INFO: oracle.calypso:Launching CmdExec
INFO: oracle.calypso:ExitCode=0
INFO: oracle.calypso:The plug-in Web Cache Configuration Assistant executed as attached=true in separate process with exitcode=0
INFO: oracle.calypso:The plug-in Web Cache Configuration Assistant has successfully been performed
INFO: oracle.iappserver.iappcore:About to execute plug-in Oracle Application Server Instance Configuration Assistant
INFO: oracle.iappserver.iappcore:The plug-in Oracle Application Server Instance Configuration Assistant is running
INFO: oracle.iappserver.iappcore:Launching CmdExec
INFO: oracle.iappserver.iappcore:ExitCode=0
INFO: oracle.iappserver.iappcore:The plug-in Oracle Application Server Instance Configuration Assistant executed as attached=true in
separate process with exitcode=0
INFO: oracle.iappserver.iappcore:The plug-in Oracle Application Server Instance Configuration Assistant has successfully been perfor
med
INFO: oracle.iappserver.iapptop:About to execute plug-in OC4J Instance Configuration Assistant
INFO: oracle.iappserver.iapptop:The plug-in OC4J Instance Configuration Assistant is running
INFO: oracle.iappserver.iapptop:Launching CmdExec
INFO: oracle.iappserver.iapptop:ExitCode=0
INFO: oracle.iappserver.iapptop:The plug-in OC4J Instance Configuration Assistant executed as attached=true in separate process with
exitcode=0
INFO: oracle.iappserver.iapptop:The plug-in OC4J Instance Configuration Assistant has successfully been performed
INFO: oracle.iappserver.iapptop:About to execute plug-in Register DCM Plug-Ins With EM
INFO: oracle.iappserver.iapptop:The plug-in Register DCM Plug-Ins With EM is running
INFO: oracle.iappserver.iapptop:Launching CmdExec
INFO: oracle.iappserver.iapptop:ExitCode=0
INFO: oracle.iappserver.iapptop:The plug-in Register DCM Plug-Ins With EM executed as attached=true in separate process with exitcod
e=0
INFO: oracle.iappserver.iapptop:The plug-in Register DCM Plug-Ins With EM has successfully been performed
INFO: oracle.iappserver.iapptop:About to execute plug-in DCM Repository Backup Assistant
INFO: oracle.iappserver.iapptop:The plug-in DCM Repository Backup Assistant is running
INFO: oracle.iappserver.iapptop:Launching CmdExec
INFO: oracle.iappserver.iapptop:ExitCode=0
INFO: oracle.iappserver.iapptop:The plug-in DCM Repository Backup Assistant executed as attached=true in separate process with exitc
ode=0
INFO: oracle.iappserver.iapptop:The plug-in DCM Repository Backup Assistant has successfully been performed
INFO: oracle.sysman.top.oms:About to execute plug-in EM Technology Stack Upgrade
INFO: oracle.sysman.top.oms:The plug-in EM Technology Stack Upgrade is running
INFO: oracle.sysman.top.oms:Launching CmdExec
INFO: oracle.sysman.top.oms:ExitCode=0
INFO: oracle.sysman.top.oms:The plug-in EM Technology Stack Upgrade executed as attached=true in separate process with exitcode=0
INFO: oracle.sysman.top.oms:The plug-in EM Technology Stack Upgrade has successfully been performed
INFO: oracle.sysman.top.oms:About to execute plug-in OMS Configuration
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration is running
INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.emcp.oms.OmsPlugIn
INFO: oracle.sysman.top.oms:Classpath = /data1/app/oem/10.2/oms10g/sysman/jlib/omsPlug.jar:/data1/app/oem/10.2/oms10g/jlib/emConfigI
nstall.jar:/data1/app/oem/10.2/oms10g/sysman/jlib/emCORE.jar:/data1/app/oem/10.2/oms10g/sysman/jlib/emagentSDK.jar:/data1/app/oem/10
.2/oms10g/sysman/jlib/log4j-core.jar:/data1/app/oem/10.2/oms10g/jdbc/lib/classes12.jar
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:CfmLogger array of log directories 0:dir entry=/data
1/app/oem/10.2/oms10g/cfgtoollogs/cfgfw
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:CfmLogger array of log directories=1:using first ent
ry=/data1/app/oem/10.2/oms10g/cfgtoollogs/cfgfw
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:Invoked with Installation_Type=NOSEED, flags and con
ditions are set for Windows=false
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Starting EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configu
ration in step=2:microstep=0
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:OmsPlugIn:perform:omsHome=/data1/app/oem/10.2/oms10g:ORACLE_H
OME_GLOBAL=/data1/app/oem/10.2/oms10g:Flags:NEED_OMS=true:omsService=true:startSevice=false:stopService=false
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:getParamStringDecrypted:Decrypting parameter=s_encrR
eposPwd
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:getConnection:Connecting as user=SYSMAN
WARNING: oracle.sysman.top.oms:getConnection::Connection refused:vhoem.citi.org:1540:OEMDB:Exception=ORA-01017: invalid username/pas
sword; logon denied
INFO: oracle.sysman.top.oms:Failed to connect to Database for s_reposUser=sysman, s_reposPwd=********, connectString=vhoem.citi.org:
1540:OEMDB. ConnectException=ORA-01017: invalid username/password; logon denied
Will retry as SYS user...
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:getParamStringDecrypted:Decrypting parameter=s_encrS
ysPwd
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:getConnection:Connecting as user SYS for internal logon as SY
SDBA
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:Result Set from Database for nodes and sids is processed for
dbUser=SYS, s_reposPwd=********, connectString=vhoem.citi.org:1540:OEMDB
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:fixNodeNames:From Template=vhoem.citi.org:Domain extracted=.c
iti.org
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:fixNodeNames:Host Name=phoem1:Would be augmented with .citi.o
rg
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:mkDescriptor:Connect Descriptor created=(DESCRIPTION=(ADDRESS
LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=phoem1.citi.org)(PORT=1540)))(CONNECTDATA=(SID=OEMDB)))
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:OmsPlugIn:perform:Performing Action=configuration with option
s = Specified: -configureOms in OracleHome=/data1/app/oem/10.2/oms10g
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:Operation Stopping OPMN Processes is in progress.
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Executing Command=/data1/app/oem/
10.2/oms10g/opmn/bin/opmnctl stopall
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:drain:Drainig running process...
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:/data1/app/oem/10.2/oms10g/opmn/b
in/opmnctl stopall have completed with exitCode=0
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
opmnctl: stopping opmn and all managed processes...
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 0 have been completed
with status=true
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:Operation EM Deploying is in progress.
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Executing Command=/data1/app/oem/
10.2/oms10g/bin/EMDeploy
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:drain:Drainig running process...
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:/data1/app/oem/10.2/oms10g/bin/EM
Deploy have completed with exitCode=0
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
Environment :
ORACLE HOME = /data1/app/oem/10.2/oms10g
STAGE DIR = /data1/app/oem/10.2/oms10g/j2ee/OC4J_EM/applications/em
TEMP DIR = /tmp
PSEP = :
Info : /data1/app/oem/10.2/oms10g/lib/ojsp.jar does not exist
Info : /data1/app/oem/10.2/oms10g/lib/ojsputil.jar does not exist
Info : /data1/app/oem/10.2/oms10g/syndication/lib/syndserver.jar does not exist
Info : /data1/app/oem/10.2/oms10g/rdbms/jlib/xsu12.jar does not exist
Info : /data1/app/oem/10.2/oms10g/network/jlib/netcfg4em12.jar does not exist
Info : /data1/app/oem/10.2/oms10g/encryption/jlib/ojmisc.jar does not exist
adding <classpath path="/data1/app/oem/10.2/oms10g/lib/ojsp.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/webservices/lib/wsdl.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/lib/dsv2.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/lib/classgen.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/rdbms/jlib/jmscommon.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/lib/ojsputil.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/lib/oraclexsql.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/jlib/providerutil.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/syndication/lib/syndserver.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/lib/xschema.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/rdbms/jlib/xsu12.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/jlib/regexp.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/oui/jlib/OraInstaller.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/network/jlib/netcfg4em12.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/encryption/jlib/ojmisc.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/jlib/orai18n.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/portal/jlib/pdkjava.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/portal/jlib/ptlshare.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/jlib/share.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/jlib/uix2.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/jlib/ohw.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/jlib/commons-el.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/jlib/jsp-el-api.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/jlib/oracle-el.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emCORE.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emCfg.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emPid.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emProvisioningAll.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emSDKsamples.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emcliload.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emclidownload.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emcoreALL.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emcoreAgent.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emcoreTest.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emcore_emjsp.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emcore_emjspf_classes.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emdloader.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emagentSDK.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emagentTest.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/iview.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/jviewsall.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/qsma.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/svgdom.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/omsPlug.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/lib/xml.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/lib/xmlmesg.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/jcb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/log4j-core.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/jlib/emConfigInstall.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emDB.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emdb_emjsp.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/ewm-1_1.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emas.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emasSDK.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emas_emdjsp.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emas_emjsp.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emd_java.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/webapps/emd/WEB-INF/lib/iview.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emcs_emdjsp.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emcs_emjsp.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emcs.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/emcsSDK.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/empp_emjsp.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/pafALL.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/pafJAXB.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_workspaces_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/um.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/ultrasearch_gc.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/esldap.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/escommon.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/esemres.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/ocscommon.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/ocsaddressbook.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/esadmin.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/collabsuiteuser.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/ocsclient_gc.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_mcs_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_files_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_discussions_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_wireless_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_ifs_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_repserv_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_repserv_em.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_repserv_emjsp.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_portal_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_portal_em.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_portal_emjsp.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_integrationbpm_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_integic_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_integb2b_engine_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_integb2b_instance_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_forms_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_sso_emjsp.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_sso_server_em.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_sso_server_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_bc4j_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/o0 [main] DEBUG emSDK.util.help - processing config file locale : _en_US
40 [main] DEBUG emSDK.util.help - processing config file locale : _de
58 [main] DEBUG emSDK.util.help - processing config file locale : _es
83 [main] DEBUG emSDK.util.help - processing config file locale : _fr
101 [main] DEBUG emSDK.util.help - processing config file locale : _ja
121 [main] DEBUG emSDK.util.help - processing config file locale : _ko
135 [main] DEBUG emSDK.util.help - processing config file locale : _pt_BR
154 [main] DEBUG emSDK.util.help - processing config file locale : _zh_CN
170 [main] DEBUG emSDK.util.help - processing config file locale : _zh_TW
199 [main] DEBUG emSDK.util.help - processing config file locale : _it
Reading ini file - '/data1/app/oem/10.2/oms10g/j2ee/deploy.ini'
Adding web-app 'em.war' for app 'em'.
OC4J instance 'OC4J_EM': Adding Environment variable 'LD_LIBRARY_PATH' with value '/data1/app/oem/10.2/oms10g/lib32:/data1/app/oem/
10.2/oms10g/network/lib32'
OC4J instance 'OC4J_EM': Adding Environment variable 'ORACLE_HOME' with value '/data1/app/oem/10.2/oms10g'
OC4J instance 'OC4J_EM': Adding java command line option '-Xmx512M -XX:MaxPermSize=256m -DORACLE_HOME=/data1/app/oem/10.2/oms10g -D
ajp.keepalive=true'
Adding web-app 'RlmUIX.war' for app 'rlmgr'.
Adding web-app 'EMAgentPush.war' for app 'EMAgentPush'.
Initializing DCM...done.
Creating OC4J instance 'OC4J_EMPROV' (protected)...done.
Creating OC4J instance 'OC4J_EM' (protected)...done.
Starting OC4J instance 'OC4J_EMPROV'...done.
Redeploying application 'EMAgentPush' to OC4J instance 'OC4J_EMPROV'.
Notification ==> Application Deployer for EMAgentPush STARTS [ 2006-11-02T15:20:31.533EST ]
Notification ==> Undeploy previous deployment
Notification ==> Removing files for app file:/data1/app/oem/10.2/oms10g/j2ee/OC4J_EMPROV/applications/EMAgentPush.ear
Notification ==> Copy the archive to /data1/app/oem/10.2/oms10g/j2ee/OC4J_EMPROV/applications/EMAgentPush.ear
Notification ==> Unpack EMAgentPush.ear begins...
Notification ==> Unpack EMAgentPush.ear ends...
Notification ==> Initialize EMAgentPush.ear begins...
Notification ==> Initialize EMAgentPush.ear ends...
Notification ==> Initialize EMAgentPush begins...
Notification ==> Initialize EMAgentPush ends...
Notification ==> Application Deployer for EMAgentPush COMPLETES [ 2006-11-02T15:20:38.752EST ]
Starting OC4J instance 'OC4J_EM'...done.
Redeploying application 'rlmgr' to OC4J instance 'OC4J_EM'.
Notification ==> Application Deployer for rlmgr STARTS [ 2006-11-02T15:20:44.464EST ]
Notification ==> Undeploy previous deployment
Notification ==> Removing files for app file:/data1/app/oem/10.2/oms10g/j2ee/OC4J_EM/applications/rlmgr.ear
Notification ==> Copy the archive to /data1/app/oem/10.2/oms10g/j2ee/OC4J_EM/applications/rlmgr.ear
Notification ==> Unpack rlmgr.ear begins...
Notification ==> Unpack rlmgr.ear ends...
Notification ==> Initialize rlmgr.ear begins...
Notification ==> Initialize rlmgr.ear ends...
Notification ==> Initialize RlmUIX begins...
Notification ==> Initialize RlmUIX ends...
Notification ==> Application Deployer for rlmgr COMPLETES [ 2006-11-02T15:20:47.754EST ]
Redeploying application 'em' to OC4J instance 'OC4J_EM'.
Notification ==> Application Deployer for em STARTS [ 2006-11-02T15:20:47.777EST ]
Notification ==> Undeploy previous deployment
Notification ==> Removing files for app file:/data1/app/oem/10.2/oms10g/j2ee/OC4J_EM/applications/em.ear
Notification ==> Copy the archive to /data1/app/oem/10.2/oms10g/j2ee/OC4J_EM/applications/em.ear
Notification ==> Unpack em.ear begins...
Notification ==> Unpack em.ear ends...
Notification ==> Initialize em.ear begins...
Notification ==> Initialize em.ear ends...
Notification ==> Initialize em begins...
Notification ==> Initialize em ends...
Notification ==> Application Deployer for em COMPLETES [ 2006-11-02T15:21:19.543EST ]
Calling updateConfig to notify DCM of new deployments...done.
Adding dependent libraries for application 'EMAgentPush'...done.
Adding OC4J mount points for application 'EMAgentPush'...done.
Adding OC4J mount points for application 'rlmgr'...done.
Adding OC4J mount points for application 'em'...done.
Calling SMI to save changes.
SMISession.saveChanges succeeded.
Binding web app 'EMAgentPush' to default-web-site for application 'EMAgentPush' in OC4J instance 'OC4J_EMPROV'
Web app 'EMAgentPush' bound successfully.
Binding web app 'RlmUIX' to default-web-site for application 'rlmgr' in OC4J instance 'OC4J_EM'
Web app 'RlmUIX' bound successfully.
Binding web app 'em' to default-web-site for application 'em' in OC4J instance 'OC4J_EM'
Web app 'em' bound successfully.
Calling updateConfig to notify DCM of new web-bindings...done.
Adding application 'EMAgentPush' to the DCM repository...done.
Application 'EMAgentPush' deployed successfully.
Stopping OC4J instance 'OC4J_EMPROV'...done.
Adding application 'rlmgr' to the DCM repository...done.
Application 'rlmgr' deployed successfully.
Adding application 'em' to the DCM repository...done.
Application 'em' deployed successfully.
Stopping OC4J instance 'OC4J_EM'...done.
Calling SMI to retry init of failed plugins...done.
Terminating DCM...done.
Copying /data1/app/oem/10.2/oms10g/j2ee/deploy.ini to /data1/app/oem/10.2/oms10g/j2ee/deploy.ini.1162498949053.bak.
Writing any undeployed entries back to /data1/app/oem/10.2/oms10g/j2ee/deploy.ini.
Oc4jDeploy tool completed successfully!
em/10.2/oms10g/sysman/jlib/j2ee/oracle_discoverer_rb.jar"/> to orion-web.xml
adding <classpath path="/data1/app/oem/10.2/oms10g/sysman/jlib/j2ee/oracle_integrationbam_rb.jar"/> to orion-web.xml
exeuting cmd line : /data1/app/oem/10.2/oms10g/jdk/bin/java -classpath /data1/app/oem/10.2/oms10g/sysman/jlib/emCORE.jar:/data1/app/
oem/10.2/oms10g/sysman/jlib/emagentSDK.jar:/data1/app/oem/10.2/oms10g/sysman/jlib/log4j-core.jar oracle.sysman.emSDK.util.help.Build
MasterHelpSet /data1/app/oem/10.2/oms10g/j2ee/OC4J_EM/applications/em/em
exeuting cmd line : /data1/app/oem/10.2/oms10g/jdk/bin/jar cfM /tmp/em/em.war *
exeuting cmd line : /data1/app/oem/10.2/oms10g/jdk/bin/jar cfM /data1/app/oem/10.2/oms10g/lib/em.ear em.war META-INF
exeuting cmd line : /data1/app/oem/10.2/oms10g/jdk/bin/java -Xmx512M -DemLocOverride=/data1/app/oem/10.2/oms10g -Djava.net.preferIPv
4Stack=true -classpath /data1/app/oem/10.2/oms10g/dcm/lib/dcm.jar:/data1/app/oem/10.2/oms10g/jlib/emConfigInstall.jar:/data1/app/oem
/10.2/oms10g/lib/classes12.zip:/data1/app/oem/10.2/oms10g/lib/dms.jar:/data1/app/oem/10.2/oms10g/j2ee/home/oc4j.jar:/data1/app/oem/1
0.2/oms10g/lib/xschema.jar:/data1/app/oem/10.2/oms10g/lib/xmlparserv2.jar:/data1/app/oem/10.2/oms10g/opmn/lib/ons.jar:/data1/app/oem
/10.2/oms10g/dcm/lib/oc4j_deploy_tools.jar oracle.j2ee.tools.deploy.Oc4jDeploy -oraclehome /data1/app/oem/10.2/oms10g -verbose -inif
ile /data1/app/oem/10.2/oms10g/j2ee/deploy.ini -redeploy
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 1 have been completed
with status=true
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 2 have been completed
with status=true
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:Operation Creating OMS Respository is in progress.
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:getParamStringDecrypted:Decrypting parameter=s_encrS
ysPwd
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:getParamStringDecrypted:Decrypting parameter=s_encrR
eposPwd
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:getParamStringDecrypted:Decrypting parameter=s_encrM
etalinkPwd
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:getParamStringDecrypted:Decrypting parameter=s_encrP
roxyPwd
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Executing Command=/data1/app/oem/
10.2/oms10g/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=vhoem.citi.org)(PORT
=1540)))(CONNECT_DATA=(SID=OEMDB))) -action drop -repos_user SYSMAN -output_file /data1/app/oem/10.2/oms10g/sysman/log/emca_repos_dr
op15_22_29.log
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:drain:Drainig running process...
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:/data1/app/oem/10.2/oms10g/sysman
/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=vhoem.citi.org)(PORT=1540)))(CONNECT_D
ATA=(SID=OEMDB))) -action drop -repos_user SYSMAN -output_file /data1/app/oem/10.2/oms10g/sysman/log/emca_repos_drop15_22_29.log ha
ve completed with exitCode=0
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
Enter SYS user's password :
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Dropping the repository..
Quiescing DB ... Failed.
Checking for Repos User ... Exists.
Repos User exists..
Clearing EM Contexts ... OK.
Dropping EM users ...
Done.
Dropping Repos User ... Done.
Dropping Roles/Synonymns/Tablespaces ... Done.
Unquiescing DB ... Done.
Dropped Repository Successfully.
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
stty: : Invalid argument
stty: : Invalid argument
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Executing Command=/data1/app/oem/
10.2/oms10g/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=vhoem.citi.org)(PORT
=1540)))(CONNECT_DATA=(SID=OEMDB))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file /data1/app/oem
/10.2/oms10g/sysman/log/emca_repos_create15_23_44.log -ecm_datafile /data3/oradata/OEMDB/mgmt_ecm_depot1.dbf -datafile /data2/oradat
a/OEMDB/mgmt.dbf
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:drain:Drainig running process...
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:/data1/app/oem/10.2/oms10g/sysman
/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=vhoem.citi.org)(PORT=1540)))(CONNECT_D
ATA=(SID=OEMDB))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file /data1/app/oem/10.2/oms10g/sysma
n/log/emca_repos_create15_23_44.log -ecm_datafile /data3/oradata/OEMDB/mgmt_ecm_depot1.dbf -datafile /data2/oradata/OEMDB/mgmt.dbf
have completed with exitCode=0
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'The OutputFile is too big to be read in memory! Check LogFile=/data1/app/oem/10.2/oms10g/sysman/log/emca_repos_create15_23_44.log
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
stty: : Invalid argument
stty: : Invalid argument
stty: : Invalid argument
stty: : Invalid argument
stty: : Invalid argument
stty: : Invalid argument
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 3 have been completed
with status=true
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:Operation Configuring OMS is in progress.
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:configureOmsService:Provided ConsolePort=4889
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:configureOmsService:emoms.properties are being instantiated f
or consolePort=4889
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:configureOmsService:Processing emailSelected=false,emailServe
r=,emailAddress=
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:configureOmsService:Secure Properties are being instantiated
by ConfigManager
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:getParamStringDecrypted:Decrypting parameter=s_encrR
eposPwd
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Executing Command=/data1/app/oem/
10.2/oms10g/bin/emctl secure status oms
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:drain:Drainig running process...
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:/data1/app/oem/10.2/oms10g/bin/em
ctl secure status oms have completed with exitCode=0
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
Oracle Enterprise Manager 10g Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Checking the security status of the OMS at location set in /data1/app/oem/10.2/oms10g/sysman/config/emoms.properties... Done.
OMS is running but has not been secured. No HTTPS Port available.
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:secureOms:Oms security setting is=false. The Configuration De
fault for OMS to be Secure and Lock Requests option is=true
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:getParamStringDecrypted:Decrypting parameter=s_encrR
eposPwd
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:getParamStringDecrypted:Decrypting parameter=s_encrS
ecurePwd
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Executing Command=/data1/app/oem/
10.2/oms10g/bin/emctl config emkey -repos -force
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:drain:Drainig running process...
INFO: oracle.sysman.top.oms:Error processing emkey command 1 from repository = /data1/app/oem/10.2/oms10g/cfgtoollogs/cfgfw/emctl_cm
d_15_33_53.log
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:/data1/app/oem/10.2/oms10g/bin/em
ctl config emkey -repos -force have completed with exitCode=1
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
Oracle Enterprise Manager 10g Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Please enter repository password:
Invalid Password
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
stty: : Invalid argument
stty: : Invalid argument
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:getEmKey:OMS Service command=config emkey -repos -force:retur
ned:
INFO: oracle.sysman.top.oms:Error processing emkey command config emkey -repos -force from repository =
ExitCode=1
Processing stopped!
INFO: oracle.sysman.top.oms:configureOmsService:Secure Properties failed to be processed by ConfigManager=Error processing emkey com
mand config emkey -repos -force from repository =
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:run:Processing Exception caught=Error processing emk
ey command config emkey -repos -force from repository =
WARNING: oracle.sysman.top.oms:EmcpPlug:startProcessing:Exception in runner=Error processing emkey command config emkey -repos -forc
e from repository =
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=config
uration in step=2:microstep=0
INFO: oracle.sysman.top.oms:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.om
s:10.2.0.1.0:common:family=CFM:oh=/data1/app/oem/10.2/oms10g:label=0} failed with an unhandled exception:
java.lang.Exception: Error processing emkey command config emkey -repos -force from repository =
at oracle.sysman.emcp.util.EmcpPlug.startProcessing(EmcpPlug.java:397)
at oracle.sysman.emcp.util.EmcpPlug.invoke(EmcpPlug.java:368)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:c
ommon:family=CFM:oh=/data1/app/oem/10.2/agent10g:label=0}
INFO: Framework waiting for Action to complete at 15:33:56.142
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 15:33:56.142
INFO: Cfm.save() was called
INFO: Cfm.save(): 15 aggregate instances saved
INFO: encap_oms:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: encap_oms:1.0.0.0.0:common:fami
ly=CFM:oh=/data1/app/oem/10.2/oms10g:label=0}
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microS
tep=0
INFO: oracle.sysman.top.oms:About to execute plug-in OMS Configuration
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration is running
INFO: oracle.sysman.top.oms:Internal PlugIn Class: oracle.sysman.emcp.oms.OmsPlugIn
INFO: oracle.sysman.top.oms:Classpath = /data1/app/oem/10.2/oms10g/sysman/jlib/omsPlug.jar:/data1/app/oem/10.2/oms10g/jlib/emConfigI
nstall.jar:/data1/app/oem/10.2/oms10g/sysman/jlib/emCORE.jar:/data1/app/oem/10.2/oms10g/sysman/jlib/emagentSDK.jar:/data1/app/oem/10
.2/oms10g/sysman/jlib/log4j-core.jar:/data1/app/oem/10.2/oms10g/jdbc/lib/classes12.jar
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:CfmLogger array of log directories 0:dir entry=/data
1/app/oem/10.2/oms10g/cfgtoollogs/cfgfw
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:CfmLogger array of log directories=1:using first ent
ry=/data1/app/oem/10.2/oms10g/cfgtoollogs/cfgfw
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:Invoked with Installation_Type=NOSEED, flags and con
ditions are set for Windows=false
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Starting EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configu
ration in step=2:microstep=0
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:OmsPlugIn:perform:omsHome=/data1/app/oem/10.2/oms10g:ORACLE_H
OME_GLOBAL=/data1/app/oem/10.2/oms10g:Flags:NEED_OMS=true:omsService=true:startSevice=false:stopService=false
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:getParamStringDecrypted:Decrypting parameter=s_encrR
eposPwd
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:getConnection:Connecting as user=SYSMAN
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:Result Set from Database for nodes and sids is processed for
dbUser=sysman, s_reposPwd=******, connectString=vhoem.citi.org:1540:OEMDB
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:fixNodeNames:From Template=vhoem.citi.org:Domain extracted=.c
iti.org
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:fixNodeNames:Host Name=phoem1:Would be augmented with .citi.o
rg
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:mkDescriptor:Connect Descriptor created=(DESCRIPTION=(ADDRESS
LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=phoem1.citi.org)(PORT=1540)))(CONNECTDATA=(SID=OEMDB)))
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:OmsPlugIn:perform:Performing Action=configuration with option
s = Specified: -configureOms in OracleHome=/data1/app/oem/10.2/oms10g
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:Operation Stopping OPMN Processes is in progress.
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Executing Command=/data1/app/oem/
10.2/oms10g/opmn/bin/opmnctl stopall
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:drain:Drainig running process...
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:/data1/app/oem/10.2/oms10g/opmn/b
in/opmnctl stopall have completed with exitCode=0
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
opmnctl: stopping opmn and all managed processes...
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 0 have been completed
with status=true
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:Operation EM Deploying is in progress.
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:deployOms:Already deployed, skipped.
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 1 have been completed
with status=true
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 2 have been completed
with status=true
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:Operation Creating OMS Respository is in progress.
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 3 have been completed
with status=true
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:Operation Configuring OMS is in progress.
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:configureOmsService:Provided ConsolePort=4889
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:configureOmsService:emoms.properties are being instantiated f
or consolePort=4889
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:configureOmsService:Processing emailSelected=false,emailServe
r=,emailAddress=
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:configureOmsService:Secure Properties are being instantiated
by ConfigManager
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:getParamStringDecrypted:Decrypting parameter=s_encrR
eposPwd
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Executing Command=/data1/app/oem/
10.2/oms10g/bin/emctl secure status oms
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:drain:Drainig running process...
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:/data1/app/oem/10.2/oms10g/bin/em
ctl secure status oms have completed with exitCode=0
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
Oracle Enterprise Manager 10g Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Checking the security status of the OMS at location set in /data1/app/oem/10.2/oms10g/sysman/config/emoms.properties... Done.
OMS is running but has not been secured. No HTTPS Port available.
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:secureOms:Oms security setting is=false. The Configuration De
fault for OMS to be Secure and Lock Requests option is=true
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:getParamStringDecrypted:Decrypting parameter=s_encrR
eposPwd
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:getParamStringDecrypted:Decrypting parameter=s_encrS
ecurePwd
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Executing Command=/data1/app/oem/
10.2/oms10g/bin/emctl config emkey -repos -force
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:drain:Drainig running process...
INFO: oracle.sysman.top.oms:Error processing emkey command 1 from repository = /data1/app/oem/10.2/oms10g/cfgtoollogs/cfgfw/emctl_cm
d_16_21_46.log
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:/data1/app/oem/10.2/oms10g/bin/em
ctl config emkey -repos -force have completed with exitCode=1
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
Oracle Enterprise Manager 10g Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Please enter repository password:
Invalid Password
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
stty: : Invalid argument
stty: : Invalid argument
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:getEmKey:OMS Service command=config emkey -repos -force:retur
ned:
INFO: oracle.sysman.top.oms:Error processing emkey command config emkey -repos -force from repository =
ExitCode=1
Processing stopped!
INFO: oracle.sysman.top.oms:configureOmsService:Secure Properties failed to be processed by ConfigManager=Error processing emkey com
mand config emkey -repos -force from repository =
FINE: oracle.sysman.emCfg.logger.CfmLogger: log: oracle.sysman.top.oms:EmcpPlug:run:Processing Exception caught=Error processing emk
ey command config emkey -repos -force from repository =
WARNING: oracle.sysman.top.oms:EmcpPlug:startProcessing:Exception in runner=Error processing emkey command config emkey -repos -forc
e from repository =
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=config
uration in step=2:microstep=0
INFO: oracle.sysman.top.oms:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.om
s:10.2.0.1.0:common:family=CFM:oh=/data1/app/oem/10.2/oms10g:label=1} failed with an unhandled exception:
java.lang.Exception: Error processing emkey command config emkey -repos -force from repository =
at oracle.sysman.emcp.util.EmcpPlug.startProcessing(EmcpPlug.java:397)
at oracle.sysman.emcp.util.EmcpPlug.invoke(EmcpPlug.java:368)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:c
ommon:family=CFM:oh=/data1/app/oem/10.2/agent10g:label=1}
INFO: Framework waiting for Action to complete at 16:21:48.962
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 16:21:48.962
INFO: Cfm.save() was called
INFO: Cfm.save(): 15 aggregate instances saved -
Error OUI-25031 - default installation
All day Im trying to install Oracle 10g Release 2 (10.2) for Solaris 10 (x86).
Each time it finishes with error: OUI-25031.
Its going to be just a default installation. I did it many times ago but never had this problem.
The log file is telling nothing to me. It complains about Enterprise Manager Grid which I dont wont to install.
Does anyone know what is the problem with it ?I have downloaded it on MAY previous year.
I believe the link is this, as the size of the file is exactly this same: http://www.oracle.com/technetwork/database/10202solx86soft-089512.html
Although I need to correct entry on my above post: file size on the UFS partition is: 681,090,961 bytes
The document I refer to is: database\doc\relnotes.102\b15696.pdf (inside of the 10202_database_solx86.zip)
Here is last 50 lines on installActions2011-01-08_09-56-02PM.log
# An error report file has been saved as hs_err_pid6915.log.
# Please refer to the file for further information.
Command = /oracle/product/10.2.0/db_2/jdk/jre//bin/java has failed
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /oracle/product/10.2.0/db_2
Configuration directory is set to /oracle/product/10.2.0/db_2/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: Created a new file /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands
INFO: Since the option is to overwrite the existing /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: --------------------------------------
INFO: The "/oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: The "/oracle/product/10.2.0/db_2/cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: Since the option is to overwrite the existing /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /oracle/product/10.2.0/db_2/cfgtoollogs/configToolFailedCommands.bak.1
SEVERE: OUI-25029:One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
INFO: User Selected: Yes/OK
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK
INFO: The OUICA command is launched from /oracle/product/10.2.0/db_2/oui/bin/ouica.sh.
WARNING:
The following configuration scripts need to be executed as the "root" user.
#!/bin/sh
#Root script to run
/oracle/product/10.2.0/db_2/root.sh
To execute the configuration scripts:
1. Open a terminal window
2. Log in as "root"
3. Run the scripts
4. Return to this window and click "OK" to continue
*** Starting OUICA ***
Oracle Home set to /oracle/product/10.2.0/db_2
Configuration directory is set to /oracle/product/10.2.0/db_2/cfgtoollogs. All xml files under the directory will be processedEdited by: user639256 on Jan 9, 2011 4:06 AM
Edited by: user639256 on Jan 9, 2011 4:09 AM -
Oracle 11g oui-25031 error (oracle database configuration assistant)
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/oracle/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any)
before executing the same.
The "/oracle/app/oracle/product/11.1.0/db_1/cfgtoollogs/configToolFailedCommands" script
->/oracle/app/oracle/product/11.1.0/db_1/oui/bin/runConfig.sh ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1 MODE=perform ACTION=configure RERUN=false
runConfig.sh ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1 MODE=perform ACTION=configure RERUN=false
->
oracle.sysman.oii.oiii.OiiiInventoryDoesNotExistException: 인벤토리 포인터 위치 /etc/oraInst.loc을(를) 읽을 수 없거나 존재하지 않습니다.
at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiIns tallAreaControl.java:1717)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS tandardInventorySession.java:292)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS tandardInventorySession.java:231)
at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicS tandardInventorySession.java:180)
at oracle.sysman.oii.oiic.OiicRunConfig.loadInventory(OiicRunConfig.java :278)
at oracle.sysman.oii.oiic.OiicRunConfig.main(OiicRunConfig.java:1004)
Exception in thread "main" java.lang.NullPointerException
at oracle.sysman.oii.oiic.OiicRunConfig.getArgumentList(OiicRunConfig.ja va:519)
at oracle.sysman.oii.oiic.OiicRunConfig.main(OiicRunConfig.java:1007)
hi!
i install oracle database 11g 1R .
error occur during installing oracle database.
please solve it!!OS version is fedora 3.
uname -a: Linux db9.sangjicom.ac.kr 2.6.9-1.667 #1 Tue Nov 2 14:41:25 EST 2004 i686 i686 i386 GNU/Linux
ORACLE_HOME is registred ORACLE_HOME=/oracle/app/oracle/product/11.1.0/db_1 in bash_profile.
Inventory is /oracle/app/Inventory. -
OUI-25031: ... Web Cache Configuration Assistant FAILED
During installation of EMGC 10.2.0.3 at OEL 4.5 (x86_64 platform) have this problem at the end of installation:
here is the error message:
Output generated from configuration assistant "Web Cache Configuration Assistant":
Command = /oracle/OMS/jdk/bin/java -DORACLE_HOME=/oracle/OMS -Djava.net.preferIPv4Stack=true -classpath /oracle/OMS/sysman/webapps/emd/WEB-INF/lib/webcachecfg.jar:/oracle/OMS/sysman/webapps/emd/WEB-INF/lib/emd.jar:/oracle/OMS/lib/emSDK.jar:/oracle/OMS/dcm/lib/dcm.jar:/oracle/OMS/jlib/repository.jar:/oracle/OMS/lib/xmlparserv2.jar:/oracle/OMS/jlib/emConfigInstall.jar:/oracle/OMS/jdbc/lib/classes12.zip:/oracle/OMS/jdbc/lib/nls_charset12.jar:/oracle/OMS/jlib/jndi.jar:/oracle/OMS/jlib/rt.jar:/oracle/OMS/jdk/lib/i18n.jar:/oracle/OMS/jlib/ldapjclnt10.jar:/oracle/OMS/jlib/ojmisc.jar:/oracle/OMS/j2ee/home/jazn.jar:/oracle/OMS/j2ee/home/jaas.jar oracle.ias.webcache.config.WebcacheConfig -oh /oracle/OMS
2
Start traversing...
got process-manager node
got ias-instance node
attrValue=IASPT
attrValue=DSA
attrValue=HTTP_Server
attrValue=LogLoader
attrValue=dcm-daemon
attrValue=OC4J
attrValue=WebCache
Entity found.
got ias-instance node
Current status is : enabled
Changing the value of port to enabled
Modified ...
SysMgmtException
se.ENTITY is : null
se.ATTRIBUTE_NAME is : null
se.ATTRIBUTE_VALUE is : null
se.BASE_EXCEPTION is : The configuration files for this Oracle Application Server instance are inconsistent with the
configuration stored in the repository. In order to protect the repository,
no further configuration or deployment operations are allowed until the problem with the configuration on the filesystem is resolved. This condition arises when a prior operation was unsuccessful. The exception associated with this failed operation is:
{0}
. Please also check the logs located at
ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
the configuration files on disk. Some possible causes are:
* permissions on files
* file contention issues on Windows NT
* internal Oracle error
After resolving the problem that prevented DCM from updating the configuration
files, you may use the dcmctl resyncInstance command to resolve the problem.
Alternatively, you can stop and then restart the active dcmctl or EMD
process and resyncInstance will automatically be performed.
Resolution:
Base Exception:
java.net.BindException
Address already in use
java.net.BindException: Address already in use
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:331)
at java.net.Socket.bind(Socket.java:498)
at java.net.Socket.<init>(Socket.java:307)
at java.net.Socket.<init>(Socket.java:124)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.openOEMSSession(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.openOEMSSession(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.sendHTTPRequest(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.getOpmnProcStatus(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.getProcessStatus(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.getComponentProcessStatus(Unknown Source)
at oracle.ias.sysmgmt.task.ProcessManager.isDaemonUp(Unknown Source)
at oracle.ias.sysmgmt.task.ProcessManager.isDaemonUp(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.isDaemonUp(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.ClusterManager.reloadOpmn(Unknown Source)
at oracle.ias.opmn.smiplugin.OpmnPlugin.reloadOpmnSynchronous(OpmnPlugin.java:265)
at oracle.ias.opmn.smiplugin.OpmnPlugin.commit(OpmnPlugin.java:251)
at oracle.ias.sysmgmt.repository.DcmPlugin.commit(Unknown Source)
at oracle.ias.sysmgmt.repository.PluginCollection.commitResyncPlugins(Unknown Source)
at oracle.ias.sysmgmt.repository.SyncUpHandler._syncUpFromPersistence(Unknown Source)
at oracle.ias.sysmgmt.repository.SyncUpHandler.syncUpTopologyConfigurationFromPersistence(Unknown Source)
at oracle.ias.sysmgmt.repository.RepositoryImpl.syncUpTopologyConfigurationFromPersistence(Unknown Source)
at oracle.ias.sysmgmt.configsvc.ConfigurationServiceImpl.syncUpTopologyConfiguration(Unknown Source)
at oracle.ias.sysmgmt.task.ConfigAdapter.resyncTopologyConfiguration(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.internal_resync(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.resync(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.ClusterManagementInput.execute(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.ResyncInput.execute(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.ClusterManager.execute(Unknown Source)
at oracle.ias.sysmgmt.task.ClusterManagementAdapter.execute(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.execute(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMasterReceiver.process(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMasterReceiver.handle(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sync_evaluate(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.internal_evaluate(Unknown Source)
at oracle.ias.sysmgmt.task.RemoteEvaluate.execCommand(Unknown Source)
at oracle.ias.sysmgmt.task.DaemonWorker.run(Unknown Source)
Configuration assistant "Web Cache Configuration Assistant" failed
The "/oracle/AGENT/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------after restart of server
the following appeared:
Output generated from configuration assistant "OC4J Instance Configuration Assistant":
Command = /oracle/OMS/jdk/bin/java -Djava.net.preferIPv4Stack=true -Djava.io.tmpdir=/tmp -mx512M -classpath /oracle/OMS/dcm/lib/dcm.jar:/oracle/OMS/dcm/lib/oc4j_deploy_tools.jar:/oracle/OMS/opmn/lib/opmnplugin.jar -Doracle.ias.sysmgmt.logging.logdir=/oracle/OMS/j2ee/home/log oracle.j2ee.tools.deploy.Oc4jDeploy -oraclehome /oracle/OMS -verbose -inifile /oracle/OMS/j2ee/deploy.ini
Reading ini file - '/oracle/OMS/j2ee/deploy.ini'
Adding web-app 'IsWebCacheWorkingWeb.war' for app 'IsWebCacheWorking'.
Initializing DCM...done.
OC4J instance 'home' already exists.
Starting OC4J instance 'home'...
ERROR: Start failed.
Error message returned is: OPMN Request: /start?mode=sync&process-type=home
OPMN Response: HTTP/1.1 204 No Content
Content-Length: 938
Content-Type: text/html
Response: 0 of 1 processes started.
<?xml version='1.0' encoding='WINDOWS-1251'?>
<response>
<opmn id="host.net:6200" http-status="204" http-response="0 of 1 processes started.">
<ias-instance id="EnterpriseManager0.host.net">
<ias-component id="OC4J">
<process-type id="home">
<process-set id="default_island">
<process id="1911095299" pid="11860" status="Init" index="1" log="/oracle/OMS/opmn/logs/OC4J~home~default_island~1" operation="request" result="failure">
<msg code="-11" text="no port available from the port range">
</msg>
<msg code="-21" text="failed to start a managed process after the maximum retry limit">
</msg>
<msg code="-11" text="no port available from the port range">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
</ias-instance>
</opmn>
</response>
If there is no response from OPMN, check OPMN configuration and restart DCM daemon. If OPMN response is available, identify the failure and the corresponding log files indicated in the OPMN response contents
Terminating DCM...done.
Copying /oracle/OMS/j2ee/deploy.ini to /oracle/OMS/j2ee/deploy.ini.1202385410248.bak.
Writing any undeployed entries back to /oracle/OMS/j2ee/deploy.ini.
Oc4jDeploy tool completed, but with errors.
Configuration assistant "OC4J Instance Configuration Assistant" failed -
OUI-25031 Cluster Configuration Assistant Fails Windows 2003 server RAC
Hi All
I am installing RAC on Windows 2003 Server X64, Dell PowerEdge 2950 Servers with iSCSI Storage.
I have 3 Network cards on each node which are configured like this
# Public
10.2.0.8 USTISDB-1.USTIS.Brgpoint.com USTISDB-1 --- in DNS
10.2.0.9 USTISDB-2.USTIS.Brgpoint.com USTISDB-2
#Virtual
10.2.0.10 USTISDB-1-vip.USTIS.Brgpoint.com USTISDB-1-vip --- in DNS
10.2.0.11 USTISDB-2-vip.USTIS.Brgpoint.com USTISDB-2-vip
#Private
192.168.2.2 USTISDB-1-priv.USTIS.Brgpoint.com USTISDB-1-priv --- in Hosts file
192.168.2.3 USTISDB-2-priv.USTIS.Brgpoint.com USTISDB-2-priv
#iSCSI Storage
192.168.1.2 Storage --- in DNS
Everything Pings everything.
When I start the installation , it installs clusterware and completes the remote operations but fails at cluster configuration window.
After checking the logs I found the list of failed commands and it says
INFO: Command = C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig
Step 1: checking status of CRS cluster
Step 2: creating directories (E:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.
and then I checked E:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands and i says
rem Copyright (c) 1999, 2005, Oracle. All rights reserved.
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/install/crssetup.config.bat
E:\oracle\product\10.2.0\crs/bin/racgons.exe add_config USTISDB-1.USTIS.Brgpoint.com:6200 USTISDB-2.USTIS.Brgpoint.com:6200
E:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:public "private"/192.168.2.0:cluster_interconnect
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "USTISDB-1,USTISDB-2" -nodevips "USTISDB-1//255.0.0.0/public,USTISDB-2//255.0.0.0/public"
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/bin/cluvfy.bat stage -post crsinst -n "USTISDB-1,USTISDB-2"
Please help, Any help will be highly appreciated.
Edited by: user651560 on Nov 13, 2008 3:24 PME:\Staging\102010_win64_x64_clusterware\clusterware\cluvfy>runcluvfy stage -pre crsinst -n ustisdb-1,ustisdb-2 -verbose
The system cannot find the file specified.
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "USTISDB-1"
Destination Node Reachable?
ustisdb-1 yes
ustisdb-2 yes
Result: Node reachability check passed from node "USTISDB-1".
Checking user equivalence...
Check: User equivalence for user "Administrator"
Node Name Comment
ustisdb-2 passed
ustisdb-1 passed
Result: User equivalence check passed for user "Administrator".
Checking administrative privileges...
Checking node connectivity...
Interface information for node "ustisdb-2"
Interface Name IP Address Subnet
public 10.2.0.9 10.0.0.0
private 192.168.2.3 192.168.2.0
san 192.168.1.6 192.168.1.0
Interface information for node "ustisdb-1"
Interface Name IP Address Subnet
public 10.2.0.8 10.0.0.0
private 192.168.2.2 192.168.2.0
san 192.168.1.5 192.168.1.0
Check: Node connectivity of subnet "10.0.0.0"
Source Destination Connected?
ustisdb-2:public ustisdb-1:public yes
Result: Node connectivity check passed for subnet "10.0.0.0" with node(s) ustisdb-2,ustisdb-1.
Check: Node connectivity of subnet "192.168.2.0"
Source Destination Connected?
ustisdb-2:private ustisdb-1:private yes
Result: Node connectivity check passed for subnet "192.168.2.0" with node(s) ustisdb-2,ustisdb-1.
Check: Node connectivity of subnet "192.168.1.0"
Source Destination Connected?
ustisdb-2:san ustisdb-1:san yes
Result: Node connectivity check passed for subnet "192.168.1.0" with node(s) ustisdb-2,ustisdb-1.
Suitable interfaces for the private interconnect on subnet "10.0.0.0":
ustisdb-2 public:10.2.0.9
ustisdb-1 public:10.2.0.8
Suitable interfaces for the private interconnect on subnet "192.168.2.0":
ustisdb-2 private:192.168.2.3
ustisdb-1 private:192.168.2.2
Suitable interfaces for the private interconnect on subnet "192.168.1.0":
ustisdb-2 san:192.168.1.6
ustisdb-1 san:192.168.1.5
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
Check: Operating system version
Node Name Available Required Comment
ustisdb-2 Windows Server 2003 Windows Server 2003 passed
ustisdb-1 Windows Server 2003 Windows Server 2003 passed
Result: Operating system version check passed.
Check: Total memory
Node Name Available Required Comment
ustisdb-2 15.99GB (16771724KB) 512MB (524288KB) passed
ustisdb-1 15.99GB (16771724KB) 512MB (524288KB) passed
Result: Total memory check passed.
Check: Swap space
Node Name Available Required Comment
ustisdb-2 17.4GB (18241648KB) 1GB (1048576KB) passed
ustisdb-1 17.4GB (18241648KB) 1GB (1048576KB) passed
Result: Swap space check passed.
Check: System architecture
Node Name Available Required Comment
ustisdb-2 64-bit 64-bit passed
ustisdb-1 64-bit 64-bit passed
Result: System architecture check passed.
Check: Free disk space in "C:\DOCUME~1\ADMINI~1.UST\LOCALS~1\Temp\1" dir
Node Name Available Required Comment
ustisdb-2 23.7GB (24848248KB) 400MB (409600KB) passed
ustisdb-1 23.65GB (24797157KB) 400MB (409600KB) passed
Result: Free disk space check passed.
System requirement passed for 'crs'
Pre-check for cluster services setup was unsuccessful on all the nodes. -
Error in Agent Configuration assitant Step in OUI
Hi , it always fail at the same place can you help me ?
Here is the ..../oraInventory/logs/installActions2009-04-02_09-08-47-AM.log thath I have
INFO: Configuration assistant "OMS Configuration" succeeded
INFO: Command = oracle.sysman.emcp.agent.AgentPlugIn
Performing free port detection on host=picasso
Securing the agent
Performing targets discovery and agent configuration
Command = oracle.sysman.emcp.agent.AgentPlugIn has failed
Exception : java.lang.Exception: 6
INFO: Configuration assistant "Agent Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /oracle/OracleHomes/agent10g
Configuration directory is set to /oracle/OracleHomes/agent10g/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/oracle/OracleHomes/agent10g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were c
ancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwo
rds (if any) before executing the same.
INFO: Since the option is to overwrite the existing /oracle/OracleHomes/agent10g/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /oracle/OracleHomes/agent10g/cfgtoollogs/configToolFailedCommands.bak.3
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this
time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK"CfmLogger_2009-04-07_11-10-42-AM.log" 32 lines, 2851 characters
INFO: Creating new CFM connection
INFO: Creating a new logger for oracle.sysman.top.agent
INFO: Unmarshalling /oracle/OracleHomes/agent10g/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.10_2_0_1_0.xml
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /oracle/OracleHomes/agent10g/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Aggregate Description oracle.sysman.top.agent:10.2.0.1.0:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Successfully returning from CfmFactory.connect()
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:10.
2.0.1.0:common:family=CFM:oh=/oracle/OracleHomes/agent10g:label=8}
INFO: Framework waiting for Action to complete at 11:11:10.814
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=1 stepIndex=1 microStep=0
WARNING: Unexpected value for property os.name=SunOS; using "env" to retrieve environment variables
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.emcp.agent.AgentPlugIn
INFO: oracle.sysman.top.agent:Classpath = /oracle/OracleHomes/agent10g/jlib/srvm.jar:/oracle/OracleHomes/agent10g/jlib/srvmhas.jar:/oracle/Ora
cleHomes/agent10g/oui/jlib/srvm.jar:/oracle/OracleHomes/agent10g/sysman/jlib/agentPlug.jar:/oracle/OracleHomes/agent10g/jlib/emConfigInstall.j
ar:/oracle/OracleHomes/agent10g/sysman/jlib/emagentSDK.jar
INFO: Error reading file /oracle9i/ora9i2/sysman/config/emd.properties
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:1:configuration in CfmAggregateInstance: oracle.sysman.top.agent:10.2
.0.1.0:common:family=CFM:oh=/oracle/OracleHomes/agent10g:label=8} failed with an unhandled exception:
java.lang.Exception: 8
at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:242)
at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:217)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: done waiting for Action from 11:11:10.814 -
10g RAC installation fails....
Hello All,
I am new to RAC installation.while doing the installation in 2node cluster,till the configuration assisstants windows everything went fine. in CA while checking the status,the oracle clusterware config assistant failed with the following log....
INFO: Starting Install on nodes 'server004'
INFO: Saving Cluster Inventory
INFO: Running command 'C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui\bin\setup.exe -jreLoc C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\jre\1.4.2 -paramFile C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui/clusterparam.ini -silent -ignoreSysPrereqs -attachHome -noClusterEnabled ORACLE_HOME=C:\oracle\product\10.2.0\crs ORACLE_HOME_NAME=OraCr10g_home CLUSTER_NODES=server003,server004 CRS=true "INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory" LOCAL_NODE=server004 -remoteInvocation -invokingNodeName server003 -logFilePath "C:\Program Files\Oracle\Inventory/logs" -timestamp 2010-05-18_11-41-42AM' on the nodes 'server004'.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Creating service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Starting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Stopping service OracleOUIOraCr10g_homeService on nodes server004.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: RUN_RECOMMENDED_TOOLS FIRST is set to false
INFO: No of Recommended Tools5
INFO: plugin-list is created
INFO: pluginlist is updated for: Oracle Clusterware current size: 1
INFO: No of ExitOnly Tools in this session: 0
INFO: cf session for perform has hashcode: 1040982
INFO: detached tool list getting prepared fo comp: Oracle Clusterware
INFO: cfsession hashcode for exit only tools: 1040982
INFO: hashcode for action: 17596838
INFO: No of ExitOnly Tools: 0
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1073741819)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Have 1GB RAM in both the nodes.
could any one help me to solve this?
Thanks,
Derick
Edited by: user4487322 on May 18, 2010 1:46 AMThank you madrid.I am installing the RAC in windows2003 sp2 server.in the link till the step no#12(12. The Configuration Assistants page appears.)everything went
fine.while checking the 'Virtual Private IP Configuration Assistant',the installation fails with following error.....
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/racgons.exe add_config server003:6200 server004:6200
INFO: Configuration assistant "Oracle Notification Server Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "Local Area Connection"/10.28.25.0:public "Local Area Connection 2"/10.10.10.0:cluster_interconnect
INFO: Configuration assistant "Oracle Private Interconnect Configuration Assistant" succeeded
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
I am able tp ping all my IP's from both the nodes,with host name &alias specified in the host file.
any thing else to be checked to fix "Virtual Private IP Configuration Assistant"?Any help? -
Oracle 10G RAC - Public & Heartbeat on 1 NIC
Hello all,
actually I am installing Oracle 10G RAC on rhel 4 (4 node cluster). But the Cluster Verification Utility aborts with errors. I checked the configToolAllCommands and tried to run the failed commands manually:
#/opt/oracle/crs/bin/oifcfg setif -global eth0.100/172.18.0.0:cluster_interconnect eth0.728/172.16.128.0:public eth0.498/172.17.1.0:cluster_interconnect
PRIF-50: duplicate interface is given in the input
PRIF-50: duplicate interface is given in the input
PRIF-50: duplicate interface is given in the input
Question:
Is it possible to put Public & Heartbeat on one NIC (eth0.728 & eth0.498)
If not is their any workaround for that issue?
Output /etc/hosts
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
172.18.253.48 eu0266.[company].net cfmaster
172.16.128.11 eu0200.[company].net eu0200
172.16.128.12 eu0201.[company].net eu0201
172.16.128.13 eu0202.[company].net eu0202
172.16.128.14 eu0203.[company].net eu0203
172.18.13.11 eu0200m.[company].net eu0200m
172.18.13.12 eu0201m.[company].net eu0201m
172.18.13.13 eu0202m.[company].net eu0202m
172.18.13.14 eu0203m.[company].net eu0203m
# Private section
172.17.1.11 eu0200-priv.[company].net eu0200-priv
172.17.1.12 eu0201-priv.[company].net eu0201-priv
172.17.1.13 eu0202-priv.[company].net eu0202-priv
172.17.1.14 eu0203-priv.[company].net eu0203-priv
# Virtual section
172.16.128.16 eu0200-vip.[company].net eu0200-vip
172.16.128.17 eu0201-vip.l[company].net eu0201-vip
172.16.128.18 eu0202-vip.[company].net eu0202-vip
172.16.128.19 eu0203-vip.[company].net eu0203-vip
Output install log:
Checking existence of VIP node application (required)
Check failed.
Check failed on nodes:
eu0203,eu0202,eu0201,eu0200
Checking existence of ONS node application (optional)
Check ignored.
Checking existence of GSD node application (optional)
Check ignored.
Post-check for cluster services setup was unsuccessful on all the nodes.
Command = /opt/[company]/oracle/crs/bin/cluvfy has failed
INFO: Configuration assistant "Oracle Cluster Verification Utility" failed
*** Starting OUICA ***
Oracle Home set to /opt/[company]/oracle/crs
Configuration directory is set to /opt/[company]/oracle/crs/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/opt/[company]/oracle/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
Thanks in advance for your help!
RegardsTads wrote:
Hi all,
I have a question about Oracle RAC and network interface.
We're using Oracle 10gR2 RAC with two nodes on Linux Red Hat.
Let's assume that the public network interface goes down.
I would like to know what happens with existing connections
on node with network interface with problems.
Are connections frozen, actives?
Can the users continue to use theses existing connections using the another node of RAC?If the interface is down? what do you think? All connections to this node will die. How does your application handle fail-over, does it attempt to reconnect or just have a complete application failure?
You should spend some time in a test lab where you can test this stuff for yourself. Read the documentation and there are tons of sites out there that purport to have all of your RAC/TAF/FAN/FAF questions. - I would read and trust the documentation first.
>
I know that the listener goes down and any other connections is allowed.
Thank you very much!!!! -
Oracle 10g rac install on vmware with server 2003 error
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac2 rac2-priv rac2
node 2: rac1 rac1-priv rac1
Creating OCR keys for user 'administrator', privgrp ''..
Operation successful.
Now formatting voting device: \\.\votedsk1
Format of 1 voting devices complete.
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
Step 4: configuring safe mode for CRS stack
Step 5: Starting up CRS stack on all nodes
rac2 service OracleCSService in improper STOPPED state, err(0)
rac1 service OracleCSService in improper PENDING state, err(997)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.Pl post in the RAC install forum - RAC, ASM & Clusterware Installation
HTH
Srini -
ORA-12560 while creating a database
Hi,
I tried to create a Oracle Database using Oracle installer.
I got the error ORA-12560
This is part of the logfile:
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = oracle.assistants.server.DbcaCfgPlugIn C:\Windows\system32\cmd /c call E:\app\Administrator\product\11.1.0\db_1/bin/dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid labor -gdbName labor.world -emConfiguration LOCAL -datafileJarLocation E:\app\Administrator\product\11.1.0\db_1\assistants\dbca\templates -datafileDestination E:\app\Administrator\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema true -recoveryAreaDestination NO_VALUE -totalMemory 818 -automaticMemoryManagement true -maskPasswords false -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Command = oracle.assistants.server.DbcaCfgPlugIn has failed
INFO: Configuration assistant "Oracle Database Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to E:\app\Administrator\product\11.1.0\db_1
Configuration directory is set to E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs. All xml files under the directory will be processed
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO: Created a new file E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Can anybody help me
Operating system Windows Server 2008
A TNSNAMES.ORA was not created even if Oracle Net Config was successful (see above)
Regards
siegwiinHi,
Make sure that you point to the right path in ORACLE_HOME directory system variable.
If you already have one ORACLE COMPONENET RUNNING (SAY 10g SOA etc). Then we need to remove the path in the variable ORACLE_HOME and point to new oracle home path.
I had the similar issue it worked me. I hope it will work for you too as well.
-- Khaleel -
I have a Windows server that is currently running 3 instances from the ora92 home. I installed 10g into a new home TEST102, everything worked fine except for the Net config assistant choked, below is the log tail:
INFO: Starting to execute configuration assistants
INFO: Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=E:\oracle\ora102SE\bin -classpath ";E:\oracle\ora102SE\jdk\jre\lib\rt.jar;E:\oracle\ora102SE\jlib\ldapjclnt10.jar;E:\oracle\ora102SE\jlib\ewt3.jar;E:\oracle\ora102SE\jlib\ewtcompat-3_3_15.jar;E:\oracle\ora102SE\network\jlib\NetCA.jar;E:\oracle\ora102SE\network\jlib\netcam.jar;E:\oracle\ora102SE\jlib\netcfg.jar;E:\oracle\ora102SE\jlib\help4.jar;E:\oracle\ora102SE\jlib\jewt4.jar;E:\oracle\ora102SE\jlib\oracle_ice.jar;E:\oracle\ora102SE\jlib\share.jar;E:\oracle\ora102SE\jlib\swingall-1_1_1.jar;E:\oracle\ora102SE\jdk\jre\lib\i18n.jar;E:\oracle\ora102SE\jlib\srvmhas.jar;E:\oracle\ora102SE\jlib\srvm.jar;E:\oracle\ora102SE\oui\jlib\OraInstaller.jar;E:\oracle\ora102SE\lib\xmlparserv2.jar;E:\oracle\ora102SE\network\tools" oracle.net.ca.NetCA /orahome E:\oracle\ora102SE /orahnam OraHome102SE /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile E:\oracle\ora102SE\network\install\netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = E:\oracle\ora102SE
Parameter "orahnam" = OraHome102SE
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = E:\oracle\ora102SE\network\install\netca_typ.rsp
Done parsing command line arguments.
Environmental error detected: The current Oracle Home and the Oracle Home passed from the installer are not the same. Oracle Net Configuration Assistant cannot continue.
It is recommended that you continue installation without completing Oracle Net configuration. Once the installation is complete run the Oracle Net Configuration Assistant separately after checking that the ORACLE_HOME environment variable is not set (preferred on Windows platforms) or that it is set to the correct Oracle Home.
Oracle Net Services configuration failed. The exit code is 1
Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe has failed
Execution Error :
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=E:\oracle\ora102SE\bin -classpath ";E:\oracle\ora102SE\jdk\jre\lib\rt.jar;E:\oracle\ora102SE\jlib\ldapjclnt10.jar;E:\oracle\ora102SE\jlib\ewt3.jar;E:\oracle\ora102SE\jlib\ewtcompat-3_3_15.jar;E:\oracle\ora102SE\network\jlib\NetCA.jar;E:\oracle\ora102SE\network\jlib\netcam.jar;E:\oracle\ora102SE\jlib\netcfg.jar;E:\oracle\ora102SE\jlib\help4.jar;E:\oracle\ora102SE\jlib\jewt4.jar;E:\oracle\ora102SE\jlib\oracle_ice.jar;E:\oracle\ora102SE\jlib\share.jar;E:\oracle\ora102SE\jlib\swingall-1_1_1.jar;E:\oracle\ora102SE\jdk\jre\lib\i18n.jar;E:\oracle\ora102SE\jlib\srvmhas.jar;E:\oracle\ora102SE\jlib\srvm.jar;E:\oracle\ora102SE\oui\jlib\OraInstaller.jar;E:\oracle\ora102SE\lib\xmlparserv2.jar;E:\oracle\ora102SE\network\tools" oracle.net.ca.NetCA /orahome E:\oracle\ora102SE /orahnam OraHome102SE /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile E:\oracle\ora102SE\network\install\netca_typ.rsp
Command = E:\oracle\ora102SE\jdk\jre\bin/java.exe has failed
Execution Error :
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: --------------------------------------
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: The "E:\oracle\ora102SE\cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25029:One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
INFO: User Selected: Yes/OK
INFO:
*** End of Installation Page***
The installation of Oracle Database 10g was successful, but some optional configuration assistants failed, were cancelled or skipped.
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK
INFO: hashcode for cfSession for exit tool exec: 4403749
INFO: executing the single exit-only tool
Now I am trying to run the Net config assistant outside of the installer and configure a 10g listener for the 10g instance using a port different from the 1521 that teh 9i listener is using and it keeps telling me that:
The information provided for this listener is currently in use by other software on this computer. You can proceed with the configuration as is but it will not be possible to start the listener until the conflict is resolved...
I have tried several different ports (the only thing that could be in conflict, I think) and I keep getting the same message..
HELP!!
Has anyone out there set up a 9i and 10g installation on Windows using two different listeners, one for the 9i and another for 10g?Yes, I have read this other thread you have cited but there is no conclusion - other than maybe by rerunning the install he overcame the issue and never completed the thread. In my case, the initial 10g install failed to run the net config assistant and there never was a 10g listener service created. Also, now I try to run the net config assistant stand alone and it refuses to create a listener service...claims that there is a conflict, even if I try on other than the default port.
I'm thinking the conflict lies with the fact there is an up and running 9i listener service and yes that listener is active because it is servicing a live production instance.
Our goal was to install a 10g instance with it's own separate listener, import our schemas and test our app on a 10g database then one day turn the 10g into the production instance.
Our plan was to avoid endangering the production environment by even trying to service the 9i database with the 10g listener. You cannot use a 9i listener for a 10g database but from what I read in the other thread you have cited, to try to fire up the 10g listener to service the 9i production instance would have resulted in a loss of servicve to the production environment if I experience the same phenomena as the fellow in the other thread.
Thank you for your time and consideration here...
I believe I should propose to have a separate server box set up to host this new 10g database. Our overall objective is to keep the production system up and running no matter what.
In the old days I remember that if too many attempts were made at installing on a Windows platform the registry would get hosed up beyond repair and the only out was to re-image the box and start over with a fresh copy of teh Windows operating system:-)
Let me know if you have any further suggestions...
Regards-
Jim
Maybe you are looking for
-
Both the device and the reformatted computer are linked to my sync account, but while the device has all my bookmarks, the computer is empty. I synced and re-synced and did the whole backup-restore thing, but nothing. I don't want to do something tha
-
Zen Nano Plus - can't move music to it all of a sud
My daughter has had a Zen Nano Plus for about 4 months - no problems up to now. She wanted to put some new music on it, and no matter what we try, we get an error - Transfer error - an error has occurred while transferring this file. I've tried it us
-
Quantity proposal in batch selection
In batch search strategies you can select a quantity proposal routine to be used to allocagtge qtys to the proposed batches in a specific manner. I'm trying to locate where you add/change/modify these routines. The help file indicates these are main
-
I just want to know if there is some way to simply combine a number of projects created in iMovie so that you can play them a one continuous presentation after being burned to the DVD. iDVD allows you to save/burn each as a seperate playable file, bu
-
Microsoft Security Compliance Manager V3 and create GPO
I have created a GPO backup from the compliance manager for Windows 7 SP1. I am trying to find documentation for the exact process of importing these settings into a newly created "blank" gpo. In review of the Backup.xml file, I can see that it refer