OUI cannot be launched when applying patch 9.2.0.8 from CD-ROM

Hi, I need help! Could someone tell me what is wrong:
When I am trying to install the patch 9.2.0.8 from CD-ROM, I get the following error
Error: OUI cannot be launched because the current working directory is set on the CD-ROM mount point. Launching OUI from this directory will make it difficult to unmount the disk later in the installation. Please change the working directory and relaunch OUI.
The operating system is solaris 64-bit 5.9
The database is of 9.2.0.1 enterprise edition
I am running the installer from a local directory /tmp with full path to the patch installer.
When I install the patch NOT from CD-ROM or ISO, everything is fine.
Thanks

Ensure you are not on the CD mountpoint before runing installer.
For instance, cd to oracle's home directory and run it from there.
$cd
$pwd
/home/oracle
$/cd_mount/install/runInstaller

Similar Messages

Error: OUI cannot be launched

Hi,
Try to install 9i patch, update 9i to 9.2.0.4 after installing 9i. Patch was copied from other server.
$cd /tech/oracle/Oracle_9i_Software/Patch/Disk1
$./runInstaller -ignoreSysPrereqs -invPtrLoc /var/opt/oracle/oraInst.loc
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8 or 5.9. Actual 5.10
Failed <<<<
Ignoring required pre-requisite failures. Continuing...
Error: OUI cannot be launched because the current working directory is set on the CD-ROM mount point. Launching OUI from this directory will make it difficult to unmount the disk later in the installation. Please change the working directory and relaunch OUI.
what is wrong...?
Thanks
Jerry
Edited by: jerrygreat on Jul 24, 2009 11:00 AM

jerrygreat wrote:
Thanks
acturally , it is same
$/tech/oracle/Oracle_9i_Software/Patch/Disk1/runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.8 or 5.9. Actual 5.10
Failed <<<<
Ignoring required pre-requisite failures. Continuing...
Error: OUI cannot be launched because the current working directory is set on the CD-ROM mount point. Launching OUI from this directory will make it difficult to unmount the disk later in the installation. Please change the working directory and relaunch OUI.
Regards,
Edited by: jerrygreat on Jul 24, 2009 11:22 AMOK, so you are using a full path spec to launch the copy of runInstaller located at /tech/oracle/Oracle_9i_Software/Patch/Disk1, but what is your "current working directory" at the time you execute this command? Show us:
$> pwd

Error when applying patch 3171663(11.5.9 CU2 )..

hi..
error when applying patch 3171663(11.5.9 CU2 )
below error in log file:
Assigned: file mscplan.odf on worker 1 for product msc username MSC.
Time is: Sat May 22 2010 21:58:03
FAILED: file mscplan.odf on worker 1 for product msc username MSC.
Time is: Sat May 22 2010 21:58:04
ATTENTION: All workers either have failed or are waiting:
FAILED: file mscplan.odf on worker 1.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
below error in workerlog.. in adworker1
===============================================================================
The table is missing the index MSC_TRADING_PARTNERS_U2
or index MSC_TRADING_PARTNERS_U2 exists on another table.
Create it with the statement:
Start time for statement below is: Sat May 22 2010 21:58:04
CREATE UNIQUE INDEX MSC.MSC_TRADING_PARTNERS_U2 ON MSC.MSC_TRADING_PARTNERS
(SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID) LOGGING STORAGE
(INITIAL 4K NEXT 40K MINEXTENTS 1 MAXEXTENTS UNLIMITED PCTINCREASE 0
FREELIST GROUPS 4 FREELISTS 4 ) PCTFREE 10 INITRANS 11 MAXTRANS 255
COMPUTE STATISTICS TABLESPACE MSCX
Statement executed.
AD Worker error:
The index cannot be created as the table has duplicate keys.
Use the following SQL statement to identify the duplicate keys:
SELECT SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID, count(*)
FROM MSC.MSC_TRADING_PARTNERS
GROUP BY SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID
HAVING count(*)>1
AD Worker error:
Unable to compare or correct tables or indexes or keys
because of the error above
Time when worker failed: Sat May 22 2010 21:58:04
====================================================================
My application version :11.5.9
my database version 8.1.7.4
Regards
Jaffer Ali

>
Use the following SQL statement to identify the duplicate keys:
SELECT SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID, count(*)
FROM MSC.MSC_TRADING_PARTNERS
GROUP BY SR_INSTANCE_ID, SR_TP_ID, PARTNER_TYPE, COMPANY_ID
HAVING count(*)>1
>
Pl post the output of the above statement
HTH
Srini

Why maintainence mode when applying patch

Hi all,
why do we put application under maintainence mode as we already get application services down when applying patch.
Bala

Hi,
If I google one particular scenario and provide the link (All the links will be refreenced) then it doesn’t mean that I am providing solution.If you click on the link above, you will find the document in the first 3-5 hits (not just referenced, with also many helpful comments and discussions).
Pointing the right link makes the difference. I just provided the link which I know.Not when the topic was discussed many times in the forum, we are trying to encourage the users to use the search feature in the forum and go through previous threads instead of posting redundant questions.
Thanks,
Hussein

OPatch failed with error code 74 when applying patch PSE 13723798

Hello all,
tried to apply patch (PSE 13723798) to fix the no-scrollbar bug in Webcenter Portal Admin Console. But found this error during the patching process, as described below. Any solution for this?
Running prerequisite checks. . .
Patch 13723798: Optional component (s) missing : [ oracle.webcenter.framework, 11.1.1.4.0, higher version 11.1.1.5.0 found. ]
Prerequisite check "CheckApplicable failed.
The details are:
Patch "13723798" is a no-op patch.
ApplySession failed during the prerequisite checks: Prerequisite check "CheckApplicable" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 74

Okay, I'll try it on VM.
Anyway, here is the result running command: opatch lsinventory
[oracle@CDJWPS01 13723798]$ opatch lsinventory
Invoking OPatch 11.1.0.8.3
Oracle Interim Patch Installer version 11.1.0.8.3
Copyright (c) 2010, Oracle Corporation. All rights reserved.
Oracle Home : /opt/app/Oracle/Middleware/Oracle_WC1
Central Inventory : /home/oracle/oraInventory
from : /etc/oraInst.loc
OPatch version : 11.1.0.8.3
OUI version : 11.1.0.9.0
OUI location : /opt/app/Oracle/Middleware/Oracle_WC1/oui
Log file location : /opt/app/Oracle/Middleware/Oracle_WC1/cfgtoollogs/opatch/opatch2013-05-31_20-43-34PM.log
Patch history file : /opt/app/Oracle/Middleware/Oracle_WC1/cfgtoollogs/opatch/opatch_history.txt
OPatch detects the Middleware Home as "/opt/app/Oracle/Middleware"
Lsinventory Output file location : /opt/app/Oracle/Middleware/Oracle_WC1/cfgtool
logs/opatch/lsinv/lsinventory2013-05-31_20-43-34PM.txt
Installed Top-level Products (1):
Oracle WebCenter Suite 11g 11.1.1.5.0
There are 1 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.

When i apply patch 43worker occur afcmgf.odf error when apply patch 4334965

when i apply patch 4334965, it occur error with: FAILED: file afcmgr.odf on worker 14 for product fnd username APPLSYS.
then the others worker's status is wait, how to resolve? and how did i know what's wrong?

Fadi,
Thanks a lot for you information, it is very helpful.
I am new to APPS, I did not know how to handle it last night
Another question, if I initiate another session to adctl to restart the failed worker, will the adpatch resume automatically?
Thanks,
Hank

Java installation hangs when applying patches

Hi all,
I recently removed my java application from my computer then tried to reinstall from the add on plug in in firefox. The program would hang at applying patches. After serveral cleanings of the failed attempt, and many hard reboots later (because the entire system would hang and not reboot from the start menu), i found that firefox 2.0.0.4 does not support the latest version.
I then tried the next version down.. same thing happened. So I tried to downlaod it for just IE7, that also yielded the same result. Bottom line... the program keeps hanging at applying patches, doesn't seem to do anything for at least 30 minutes, before I give up and have to hard reboot my computer.
I've tried searching the problem on google, but have found nothing that resembles my problem or fixes it, following removal and installation leads.
Please help!
XP PRO 32bit
AMD 64 dual core
IE7
Firefox

I solved this problem by installing Cryptography Toolkit.

Error while applying patch to 12.1.3 from 12.1.1

Hi,
while I'm applying patch 9239090, I'm getting the following error:
The following Oracle Forms objects did not generate successfully:
au      resource        IEXFBALI.pll
au      resource        OKSACTEV.pll
au      resource        OKSAUDET.pll
au      resource        CSCUTILS.pll
au      resource        OKCEXEVT.pll
au      resource        OKCEXPOR.pll
au      resource        OKCKSRCH.pll
The following Oracle Forms objects did not generate successfuly:
iex     forms/US     IEXCUOVW.fmx
iex     forms/US     IEXRCALL.fmx
wms     forms/US     WMSLABEL.fmx
wsh     forms/US     WSHQSSUI.fmx
wsh     forms/US     WSHSTREF.fmx
wsh     forms/US     WSHFSTRX.fmx
and i have allready applied patch 9239089 before 9239090

IEXCUOVW.fmx
Error Statement:
FRM-30064: Unable to parse statement select site_uses.location location,
       party_site.party_site_number,
       substr(loc.address1,1,25) ||' '
            || substr(loc.address2,1,25) ||' '
            || substr(loc.address3,1,25) ||' '
            || substr(loc.address4,1,25) ||' '
            || loc.city|| ',' || ' '
            || nvl(loc.state, loc.province) ||' '
            || t.territory_short_name address,
       site_uses.primary_flag,
       loc.address1 address1,
       loc.address2,
       loc.city ||','|| ' '|| nvl(loc.state, loc.province)
           ||' '||loc.postal_code|| ' '
           || t.territory_short_name address3,
       site_uses.site_use_id customer_site_use_id,
       site_uses.cust_acct_site_id address_id,
       site_uses.bill_to_site_use_id bill_to_site_use_id,
       site_uses.primary_salesrep_id primary_salesrep_id,
       loc_assign.loc_id location_id,
       loc.state state,
       loc.country country,
       loc.postal_code postal_code,
       site_uses.territory_id territory_id,
       lp.meaning business_purpose,
       lp2.meaning primary_flag_meaning,
       ca.cust_account_id cust_account_id,
       ca.account_number account_number,
        decode(substrb(person.person_last_name,1,50), null,
                    substrb(person.person_first_name,1,40),
                    substrb(person.person_last_name,1,50) ||', ' ||
                    substrb(person.person_first_name,1,40))
                    contact_name,
       owner_party.party_name owner_party
from hz_cust_acct_sites acct_site,
     hz_party_sites party_site,
     hz_cust_accounts ca,
     hz_loc_assignments loc_assign,
     hz_locations loc,
     hz_cust_site_uses site_uses,
     fnd_territories_vl t,
     ar_lookups lp ,
     ar_lookups lp2,
     hz_cust_account_roles role,
     hz_parties person,
     hz_relationships rel,
     hz_parties owner_party
where ca.party_id IN
     (SELECT CAST(:IEXCUOVW_HEADER.ORG_PARTY_ID AS NUMBER) FROM dual
       UNION
      SELECT ar.related_party_id
        FROM ar_paying_relationships_v ar
       WHERE ar.party_id = :IEXCUOVW_HEADER.PARTY_ID
         AND TRUNC(sysdate) BETWEEN
             TRUNC(NVL(ar.effective_start_date,sysdate)) AND
             TRUNC(NVL(ar.effective_end_date,sysdate)) )
and acct_site.cust_account_id = ca.cust_account_id
and acct_site.party_site_id = party_site.party_site_id
and loc.location_id = party_site.location_id
and loc.location_id = loc_assign.location_id
and nvl(acct_site.org_id, -99) = nvl(loc_assign.org_id, -99)
and acct_site.cust_acct_site_id = site_uses.cust_acct_site_id
and loc.country = t.territory_code
and site_uses.site_use_code = lp.lookup_code
and lp.lookup_type = 'SITE_USE_CODE'
and site_uses.site_use_code = 'BILL_TO'
-- and site_uses.status = 'A'
-- and acct_site.status = 'A'
and site_uses.primary_flag = lp2.lookup_code
and lp2.lookup_type = 'YES/NO'
and   site_uses.contact_id = role.cust_account_role_id(+)
and   role.party_id = rel.party_id(+)
and   rel.subject_table_name(+) = 'HZ_PARTIES'
and   rel.object_table_name(+) = 'HZ_PARTIES'
and   rel.directional_flag(+) = 'F'
and   role.role_type(+)          = 'CONTACT'
and   rel.subject_id        = person.party_id(+)
and owner_party.party_id = ca.party_id
order by location,
         address1
ORA-25137: Data value out of range
Record Group IEXCUOVW_LOC_ORG_PAYING_RG
Form: IEXCUOVW
FRM-30085: Unable to adjust form for output.
WMSLABEL.fmx
Error Statements:
FRM-30064: Unable to parse statement select upet.type_name EPC_type_name, upec.name category_name, upet.type_id, upec.category_id
from mgd_idencoding_category upec,
     mgd_idencoding_type upet
where upec.category_id = upet.category_id
and ((NVl(upet.partition_value,0)= 0 and upet.category_id = 1 ) or upet.category_id <> 1)
order by upec.category_id,type_name.
ORA-00942: table or view does not exist
Record Group EPC_RULE_RG
Form: WMSLABEL
FRM-30085: Unable to adjust form for output.
Generated    0 files successfully.
Generated    0 files with non-fatal warnings.
Generated    1 files with fatal errors.
adfrmgen is exiting with status 1
End of adfrmgen session
Date/time is Mon Feb 20 2012 04:44:01
WSHFSTRX.fmx
Error Statements :
Compiling package body TRIP...
Compilation error on package body TRIP:
PL/SQL ERROR 905 at line 1703, column 18
object APPS.WSH_FTE_TP_INTEGRATION is invalid
PL/SQL ERROR 0 at line 1703, column 18
Item ignored
PL/SQL ERROR 320 at line 1714, column 35
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1712, column 5
Statement ignored
PL/SQL ERROR 320 at line 1720, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1720, column 6
Statement ignored
PL/SQL ERROR 320 at line 1721, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1721, column 6
Statement ignored
PL/SQL ERROR 320 at line 1722, column 17
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1722, column 6
Statement ignored
IEXRCALL.fmx
Error Statements:
FRM-30064: Unable to parse statement select site_uses.location location,
       party_site.party_site_number,
       substr(loc.address1,1,25) ||' '
            || substr(loc.address2,1,25) ||' '
            || substr(loc.address3,1,25) ||' '
            || substr(loc.address4,1,25) ||' '
            || loc.city|| ',' || ' '
            || nvl(loc.state, loc.province) ||' '
            || t.territory_short_name address,
       site_uses.primary_flag,
       loc.address1 address1,
       loc.address2,
       loc.city ||','|| ' '|| nvl(loc.state, loc.province)
           ||' '||loc.postal_code|| ' '
           || t.territory_short_name address3,
       site_uses.site_use_id customer_site_use_id,
       site_uses.cust_acct_site_id address_id,
       site_uses.bill_to_site_use_id bill_to_site_use_id,
       site_uses.primary_salesrep_id primary_salesrep_id,
       loc_assign.loc_id location_id,
       loc.state state,
       loc.country country,
       loc.postal_code postal_code,
       site_uses.territory_id territory_id,
       lp.meaning business_purpose,
       lp2.meaning primary_flag_meaning,
       ca.cust_account_id cust_account_id,
       ca.account_number account_number,
        decode(substrb(person.person_last_name,1,50), null,
                    substrb(person.person_first_name,1,40),
                    substrb(person.person_last_name,1,50) ||', ' ||
                    substrb(person.person_first_name,1,40))
                    contact_name,
       owner_party.party_name owner_party
from hz_cust_acct_sites acct_site,
     hz_party_sites party_site,
     hz_cust_accounts ca,
     hz_loc_assignments loc_assign,
     hz_locations loc,
     hz_cust_site_uses site_uses,
     fnd_territories_vl t,
     ar_lookups lp ,
     ar_lookups lp2,
     hz_cust_account_roles role,
     hz_parties person,
     hz_relationships rel,
     hz_parties owner_party
where ca.party_id IN
     (SELECT CAST(:IEXCUOVW_HEADER.ORG_PARTY_ID AS NUMBER) FROM dual
       UNION
      SELECT ar.related_party_id
        FROM ar_paying_relationships_v ar
       WHERE ar.party_id = :IEXCUOVW_HEADER.PARTY_ID
         AND TRUNC(sysdate) BETWEEN
             TRUNC(NVL(ar.effective_start_date,sysdate)) AND
             TRUNC(NVL(ar.effective_end_date,sysdate)) )
and acct_site.cust_account_id = ca.cust_account_id
and acct_site.party_site_id = party_site.party_site_id
and loc.location_id = party_site.location_id
and loc.location_id = loc_assign.location_id
and nvl(acct_site.org_id, -99) = nvl(loc_assign.org_id, -99)
and acct_site.cust_acct_site_id = site_uses.cust_acct_site_id
and loc.country = t.territory_code
and site_uses.site_use_code = lp.lookup_code
and lp.lookup_type = 'SITE_USE_CODE'
and site_uses.site_use_code = 'BILL_TO'
-- and site_uses.status = 'A'
-- and acct_site.status = 'A'
and site_uses.primary_flag = lp2.lookup_code
and lp2.lookup_type = 'YES/NO'
and   site_uses.contact_id = role.cust_account_role_id(+)
and   role.party_id = rel.party_id(+)
and   rel.subject_table_name(+) = 'HZ_PARTIES'
and   rel.object_table_name(+) = 'HZ_PARTIES'
and   rel.directional_flag(+) = 'F'
and   role.role_type(+)          = 'CONTACT'
and   rel.subject_id        = person.party_id(+)
and owner_party.party_id = ca.party_id
order by location,
         address1
ORA-25137: Data value out of range
Record Group IEXCUOVW_LOC_ORG_PAYING_RG
Form: IEXRCALL
FRM-30085: Unable to adjust form for output.
WSHSTREF.fmx
Error statements:
Compiling package body TRIP...
Compilation error on package body TRIP:
PL/SQL ERROR 905 at line 1703, column 18
object APPS.WSH_FTE_TP_INTEGRATION is invalid
PL/SQL ERROR 0 at line 1703, column 18
Item ignored
PL/SQL ERROR 320 at line 1714, column 35
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1712, column 5
Statement ignored
PL/SQL ERROR 320 at line 1720, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1720, column 6
Statement ignored
PL/SQL ERROR 320 at line 1721, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1721, column 6
Statement ignored
PL/SQL ERROR 320 at line 1722, column 17
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1722, column 6
Statement ignored
WSHQSSUI.fmx
Error statements:
Compiling package body TRIP...
Compilation error on package body TRIP:
PL/SQL ERROR 905 at line 1703, column 18
object APPS.WSH_FTE_TP_INTEGRATION is invalid
PL/SQL ERROR 0 at line 1703, column 18
Item ignored
PL/SQL ERROR 320 at line 1714, column 35
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1712, column 5
Statement ignored
PL/SQL ERROR 320 at line 1720, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1720, column 6
Statement ignored
PL/SQL ERROR 320 at line 1721, column 16
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1721, column 6
Statement ignored
PL/SQL ERROR 320 at line 1722, column 17
the declaration of the type of this expression is incomplete or malformed
PL/SQL ERROR 0 at line 1722, column 6
Statement ignoredthese are the error statements

Patch issue when applying patch 6012742

When I run opatch to install the patch 6012742 I get the following error:
Invoking OPatch 10.2.0.3.3
Oracle interim Patch Installer version 10.2.0.3.3
Copyright (c) 2007, Oracle Corporation. All rights reserved..
Oracle Home : d:\oracle\product\10.2.0\db_1
Central Inventory : C:\Program Files\Oracle\Inventory
from : n/a
OPatch version : 10.2.0.3.3
OUI version : 10.2.0.3.0
OUI location : d:\oracle\product\10.2.0\db_1\oui
Log file location : d:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch2007-10-18_12-27-41PM.log
ApplySession applying interim patch '6012742' to OH 'd:\oracle\product\10.2.0\db_1'
Interim Patch '6012742' is not applicable to OH 'd:\oracle\product\10.2.0\db_1'... Platforms not compatible
ApplySession failed: ApplySession failed to prepare the system. OUI-67020:Interim Patch '6012742' is not applicable to OH 'd:\oracle\product\10.2.0\db_1'... Platforms not compatible
OPatch detects Platform ID (cannot get ID)-1 while this patch supports the following platforms: [ 215: MS Windows Server 2003, 207: Microsoft Windows XP, 912: MS Windows NT, 100: MS Windows 2000, ]
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 73
Can anyone help with this.

follow
start / execute / cmd
set OPATCH_PLATFORM_ID=207
cd <patch directory>
opatchRegards
Marcio Paiva

Problems when applying patch 142807-02 on clean DSEE 6.3.1

Hello,
I just installed DSEE 6.3.1 (patching from 6.0) and I was going to apply the security patch for NSS and SASL (142807-02)
as mentioned in the releasenotes.
However when i followed the instructions:
# cd 142807-02/SunOS_i86pc/delivery/
# ./Install /opt/SUNWdsee
I got alot of errors from the cp command inside the install-script:
....(alot more)...
cp: cannot create /opt/SUNWdsee/dsee6/private/lib/libplc4.so: No such file or directory
cp: cannot create /opt/SUNWdsee/dsee6/private/lib/libjss4.so: No such file or directory
cp: cannot create /opt/SUNWdsee/dsee6/private/lib/sasl2/libsasl.so: No such file or directory
...(alot more)...
In the end it worked without errors if I manually created the following directories:
# mkdir /opt/SUNWdsee/dsee6/private
# mkdir /opt/SUNWdsee/dsee6/private/include
# mkdir /opt/SUNWdsee/dsee6/private/include/obsolete
# mkdir /opt/SUNWdsee/dsee6/private/lib
# mkdir /opt/SUNWdsee/dsee6/private/lib/sasl2
My server instance seems to start fine after this, but it seems kindof wrong that I need to create
these directories manually.
Is there any problem doing this? what is causing this?
My OS installation is Solaris 10 x86 64-bit (Update 7).
Regards,
Tobbe

142807-02 covers 2 Sun Alerts:
- 273350: http://sunsolve.sun.com/search/document.do?assetkey=1-66-273350-1 (fixed by NSS 3.12.5)
- 259148: http://sunsolve.sun.com/search/document.do?assetkey=1-66-259148-1 (fixed by SASL 2.19_20090601)
You will find patch numbers for native delivery of DSEE in the description of these 2 Sun Alerts.
Carole

Problem when applying patch 4948577

Hi Guru's
i am doing upgrade Developer 6i patch set level 18. when i applyed this patch 4948577 it went perfectly and as per the readme it is asking to run the below command.
cd $ORACLE_HOME/procbuilder60/lib; make -f ins_procbuilder.mk install
but the above command is giving fallowing error at the end. i have not understood please find me solution for that.
/ -lXt -lX11 -lm -lix60 -lixd60 -lX11 -lnlsrtl3 -lXp -lXext
/usr/X11R6/lib/libICE.so.6: undefined reference to `_setjmp@GLIBC_2.0'
/usr/X11R6/lib/libXm.so: undefined reference to `getpwuid_r@GLIBC_2.1.2'
/usr/lib/libpthread.so: undefined reference to `__sysctl@GLIBC_2.2'
/usr/lib/libpthread.so: undefined reference to `_IO_list_unlock@GLIBC_2.2'
/usr/X11R6/lib/libX11.so: undefined reference to `shmctl@GLIBC_2.2'
/usr/lib/libpthread.so: undefined reference to `_IO_iter_file@GLIBC_2.2'
/usr/X11R6/lib/libXm.so: undefined reference to `getpwnam_r@GLIBC_2.1.2'
/usr/lib/libpthread.so: undefined reference to `getrlimit@GLIBC_2.2'
/usr/lib/libpthread.so: undefined reference to `_IO_list_resetlock@GLIBC_2.2'
/usr/lib/libpthread.so: undefined reference to `_IO_iter_begin@GLIBC_2.2'
/usr/X11R6/lib/libXm.so: undefined reference to `readdir64_r@GLIBC_2.2'
/usr/lib/libpthread.so: undefined reference to `__rpc_thread_destroy@GLIBC_2.2.3'
/usr/lib/libpthread.so: undefined reference to `__libc_sigaction@GLIBC_2.2'
/usr/lib/libpthread.so: undefined reference to `_IO_iter_next@GLIBC_2.2'
/usr/lib/libdl.so: undefined reference to `_dl_vsym@GLIBC_2.2'
/usr/lib/libpthread.so: undefined reference to `_IO_iter_end@GLIBC_2.2'
/usr/lib/libpthread.so: undefined reference to `setrlimit@GLIBC_2.2'
/usr/lib/libpthread.so: undefined reference to `_IO_list_lock@GLIBC_2.2'
/usr/X11R6/lib/libXm.so: undefined reference to `localeconv@GLIBC_2.2'
/usr/lib/libdl.so: undefined reference to `_dl_sym@GLIBC_2.2'
collect2: ld returned 1 exit status
make: *** [de60desm] Error 1
[applmgr@hrmsprod lib]$
Thanks and Regards.

Unset the following variables:
unset LD_ASSUME_KERNEL
unset LDEMULATION
unset GCC_EXEC_PREFIX
Then, try to issue "make -f ins_procbuilder.mk install"

We have overwritten existing oraenv ,coraenv db_home when applying patch 10.2.0.4 on 10.2.0.1

Hello Everyone ;
I have successfully 10.2.0.4 binaries installation completed on 10.2.0.1 . but we made small
mistake when executing root.sh we have overwritten existing oraenv ,coraenv db_home (10.2.0.1)
can i continue ? or uninstall the patch ?
Thanks ..

oh ! thanks srini ... but someone recommend like following below ..
# cd /usr/local/bin/
# mv dbhome dbhome_10201
# mv oraenv oraenv_10201
# mv coraenv coraenv_10201
/* Now execute the script suggested by the installer. */
# /u01/apps/oracle/product/10.2.0/db_1/root.sh
Running Oracle10 root.sh script...
Always can i follow above suggestion ??
Thanks ..

Missing patch files when applying patch

Hello
I have been trying to apply the Oracle 8.1.5 patch and I have
followed the instructions given. On running the script
(sh linux815patch.sh)it goes through the motions of installing
the patch for about a second and then stops with a message
"missing patch files". I have dowloaded the patch from two
different locations twice and it still gives the same problem.
Has anyone come across this and how was the problem solved ?
Many thanks
null

Mikael Hallendal (guest) wrote:
: Sunday Oke (guest) wrote:
: : Alex (guest) wrote:
: : : Sunday Oke (guest) wrote:
: : : : Hello
: : : : I have been trying to apply the Oracle 8.1.5 patch and I
: : have
: : : : followed the instructions given. On running the script
: : : : (sh linux815patch.sh)it goes through the motions of
: : installing
: : : : the patch for about a second and then stops with a
message
: : : : "missing patch files". I have dowloaded the patch from
two
: : : : different locations twice and it still gives the same
: : problem.
: : : : Has anyone come across this and how was the problem
solved
: : : : Many thanks
: : : Be sure that there are no other files in the directory
where
: : : linux815patch.sh extracted.
: : : Remove them all from there.
: : : For example, linux_81501patch_ee.tgz can be there ;-)
: : Hello
: : I tried this, but it still doesn't work.
: : Please help
: If you run the command 'find . -type f -print | wc -l' (from
the
: install-script) the result should be 38, if not you have the
: wrong number of files in the directory (be sure to unpack the
: patch-tgz-file in a clean directory) and be sure to remove the
: tgz-file after unpacking it (I didn't and got a total file-
count
: of 39).
: Regards / Mikael
It works now
Many thanks
null

Error when applying patch 5739724

ATTENTION: All workers either have failed or are waiting:
FAILED: file WSHDDACB.pls on worker 1.
FAILED: file INVTRXWB.pls on worker 2.
FAILED: file WMSPSHPB.pls on worker 3.
FAILED: file WMSDSPVB.pls on worker 4.
FAILED: file WSHDEACB.pls on worker 5.
FAILED: file WSHDETHB.pls on worker 6.
FAILED: file WSHDDSPB.pls on worker 7.
FAILED: file INVPWSHB.pls on worker 8.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
Pls help.

Please try the following:
SQL> connect apps/<apps password>
SQL> alter system flush shared_pool;
SQL> alter package WSH_DELIVERY_DETAILS_ACTIONS compile body reuse settings;Let us know if you get any errors.
Also, please try to run this command from the log file:
sqlplus -s APPS/***** @/u01/oracle/testappl/wsh/11.5.0/patch/115/sql/WSHDDACB.pls
Thanks,
Hussein

Error when applying patch SAPKB62021

Dear All,
I have fresh Install SAP 4.7 with SQL 2000. When I am updating basis Support pack i.e SAPKB62021.
It give messege
Error in Phase :-XPRA_EXECUTION
Reasion for error :TP_STEP_FAILURE
Return Code : 0008
Please help
Thanks & Regards

Hi Anurag,
Check below notes
Note 782140 - OCS: Known problems with Support Packages in Basis Rel. 6.20
Note 537881 - TP stops during execution of SPAM phase XPRA_EXECUTION
Regards
Ashok

OUI cannot be launched when applying patch 9.2.0.8 from CD-ROM

Similar Messages

Maybe you are looking for