OUI Hangs during Oracle 8i install on Mandrake 7.1

I have gone through all of the instructions I have found on this forum for installing 8i on Linux. I have downloaded and installed the JRE, created the oracle user, added the necessary lines to my .bash_profile, etc.
When I change to the /install/linux directory on my 8i installation cd and try to run ./runInstaller, the initial OUI welcome screen comes up. When I click on the "next" button, nothing happens, and I can't proceed. Has anyone out there experienced this? Any suggestions?

Which version of oracle ?
It works with oracle 8.1.6 and Mandrake 7.2
Hi have tested oracle 8.1.5 / 8.1.6 on mandrake 7.1 and Corporate and it works too
[email protected]
Professional Services
null

Similar Messages

Installer quits during Oracle 9i install on RedHat 7.1

I am attempting to install Oracle 9i (version 9.0.2.0.1.0) on RedHad 7.1.The installer quits after selection is made on Installation Types window.

Hi I need some help
I am attempting to install Oracle 9i (version 9.0.2.0.1.0) on RedHad 7.1.The installer quits after selection is made on Installation Types window.
Below is some additional information which may help to focus in on my exact problem:
1) When I issue the run command I receive the following in the terminal window prior the OUI slash screen:
[oracle@GQ3016RH71 oracle]$ /opt/Disk1/runInstaller
[oracle@GQ3016RH71 oracle]$ Initializing Java Virtual Machine from /tmp/OraInstall2003-04-20_07-12-30AM/jre/bin/java. Please wait...
Font specified in font.properties not found [--symbol-medium-r-normal--*-%d-*-*-p-*-adobe-fontspecific]
2) After selecting the Installation type, the OUI quits when loading the Java Runtime Environment.
Thanks In Advance

Host hangs during bootup after installing Hyper-V Role

My hyperv test box is a Dell Optiplex 980, i7, 8GB RAM.
Due to small data partitions I had to rearrange the partitions on the disk.
Before this the layout was like this:
#1 primary WS2008R2SP1
#2 primary WS2012 RTM Build9200
#3 primary ext3, boot partition
#4 extended
#N logical WS2012R2 RTM Build9600, booted from #1
#N logical WIN data partition with VM images
System was booting from #3 into grub, which did chainload into #1, #2 and several logical paritions.
Now the layout is like this:
#1 primary ext2
#2 primary ntfs, boot parition
#3 primary linux-swap
#4 extended
#5 logical WS2008R2SP2
#6 logical WS2012 RTM Build9200
#7 logical WS2012R2 RTM Build9600
#8 logical WSBeta1, empty
#9 logical WSBeta2, empty
#10 logical WIN data , now large enough, still empty
#N logical several ext3 partitions
First I installed WS2008R2, installed role Hyper-V, applied all updates. Everything looks fine there.
Then I installed WS2012, system came up fine. Then the trouble started: first installed role Hyper-V, after several reboots during role installation the box is hanging with busy HDD LED. Not sure if there is actually disk activity. It booted up to the turquoise
squares which are initially shown. But those white spinning points are not shown. After one hour I did a hard reset, installed WS2012 again and applied all available updates before attempting to install the role Hyper-V. But unfortunately same result.
Then I figured this bug might be fixed with WS2012R2. So same procedure, install WS2012R2, apply all available updates, system comes up fine. Install role Hyper-V, several automatic reboots during role installation. Result: same hang with busy HDD LED.
I'm not familier with the Windows boot details.
So my question is: What debug data can I provide so that someone familiar with the boot sequence of a Windows host can see how far it got? Are there any logfiles written, and hopefully flushed to disk, to see how far in booting it got? I remember in the
startup properties there are knobs for serial ports. I will enabled them from the WS2008 partition, maybe some useful progress log is written to the serial port.
Over night I will let it run, maybe WS2012R2 recovers after a few hours.
Thanks for any help with tracking this windows bug down.
Olaf

Here is the actual, new partition layout which I still had in another window:
root@optiplex:~ # parted /dev/sda unit s print
Model: ATA WDC WD15EADS-00P (scsi)
Disk /dev/sda: 2930277168s
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 2048s 2097151s 2095104s primary ext3 type=83
2 2097152s 4194303s 2097152s primary ntfs boot, type=07
3 4194304s 20971519s 16777216s primary linux-swap(v1) type=82
4 20971520s 2930276351s 2909304832s extended lba, type=0f
5 20973568s 73402367s 52428800s logical ntfs type=07
6 73404416s 125833215s 52428800s logical ntfs type=07
7 125835264s 178264063s 52428800s logical ntfs type=07
8 899624960s 1048561663s 148936704s logical ext3 type=83
9 1048576000s 1258289151s 209713152s logical ext3 type=83
10 1258291200s 1853884415s 595593216s logical ext3 type=83
11 1853886464s 2930276351s 1076389888s logical ext3 type=83
root@optiplex:~ # parted /dev/sda unit GiB print
Model: ATA WDC WD15EADS-00P (scsi)
Disk /dev/sda: 1397GiB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 0,00GiB 1,00GiB 1,00GiB primary ext3 type=83
2 1,00GiB 2,00GiB 1,00GiB primary ntfs boot, type=07
3 2,00GiB 10,0GiB 8,00GiB primary linux-swap(v1) type=82
4 10,0GiB 1397GiB 1387GiB extended lba, type=0f
5 10,0GiB 35,0GiB 25,0GiB logical ntfs type=07
6 35,0GiB 60,0GiB 25,0GiB logical ntfs type=07
7 60,0GiB 85,0GiB 25,0GiB logical ntfs type=07
8 429GiB 500GiB 71,0GiB logical ext3 type=83
9 500GiB 600GiB 100GiB logical ext3 type=83
10 600GiB 884GiB 284GiB logical ext3 type=83
11 884GiB 1397GiB 513GiB logical ext3 type=83

Cannot connect to Oracle XE - install on Mandrake 2005

Hi!
Downloaded Oracle XE and attepmted an install on my home computer running Mandrake 2005. At first it complained about missing libaio so I downloaded and installed latest Fedora rpm. Without problems. Then it happily installed, although at one moment it complained the machine does not meet minimum requirements (only 217Mb memory, hmm why I thought I have 256?). It installed otherwise fine. I run configuration scripts - default ports, system password, start at boot - yes. So far so good.
It created a shortcut for "Getting Started" page on my desktop, but would not make any menu items. OK, after all its not a supported distro. So I pointed Firefox at http://127.0.0.1:8080/apex and got connection refused.
Checked. Process oracle-xe is running. I can start and stop it. Listener is up and listening. There is no firewall whatsoever - we're sitting on a dialup here. Tried to connect as root, no candy. Ahh, yes, I should mention that even if memory is lacking there is about 800 megs of swap and ample diskspace too, so other hardware req's should be OK. So everything is almost like it should. Except that I cannot connect. So can you tell me what else to check and what to try?
Wahur, database newb

Oracle XE has it's own forum - to register and discuss XE problems with XE experts use URL http://www.oracle.com/technology/xe/registration
Once you have registered, you can sign in to the forums and voila - the link to the XE forum is there. But you do have to sign in.

Oracle 10g/Instalation Error/mandrake 10/kernel 2.6

Is there any way to install it on other distribution than redhat-2.1, UnitedLinux-1.0 or redhat-3?
[oracle@laisdeguia oracle]$ /mnt/cdrom/db/install/runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, UnitedLinux-1.0 or redhat-3
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2004-04-17_01-21-19PM/installActions2004-04-17_01-21-19PM.log

You can simply add a new distribution into install script Disk1/install/oraparam.ini. After that just run Disk1/runInstaller.
Please, let me know if your installation finished without problems. When I was installed it there was thrown an error with parameters error oemlib-10_1_0 (or something like that) , cannot run ./dbca because of java errors etc etc etc...
Thank you

My imac hangs during starup after installing update

I installed the new update for OSX lion this morning and after installation the mac rebooted and it hangs on the gray apple screen.

The system was working fine before the update.
I got severals errors with the restore disk permissions the first time I ran it. The second time it didn't return any errors. The disk utility din't return any errros.
After booting in safe mode and hhaving the system hang again I ran the repair disk permission utility again and keep getting the same errors that are being repaired even after running it 5 times is a row.
The Imac is 3 months old and came with Snow Lzapord installed whitch I upgraded to Lion after startup thru the up-to-date program Apple offered.
Thanks for all the help seeing this is my first Mac

OSX hangs during boot or install

Hello all,
I'm writing this because I'm not really sure where else to post this at to get an indepth answer. Currently I have a dual G4 450mhz AGP PowerMac that I bought used. When I purchased it, it had 768mb of ram and the only thing it didn't have was a working hard drive. After putting in a new hard drive the system worked great when i intially installed OS9 and later OSX for fun.
However I had to remove the 768mb of RAM because a client PC needed it and that took priority over my dual G4 at the time. Just the other week I purchased 2 x 256mb of RAM from Omni Technologies (omnitechnologies.biz) which guarantees working ram for specified Apple systems.
Upon receiving that ram and installing it, I powered on the G4 only to find it would "hang" when booting OSX (10.3.9). The symptoms are as follows: When powering on I hear the normal chime and the white screen with gray apple logo appears. Seconds later the spinning progress indicator shows up spinning in circles as OSX is booting. However after about 5 minutes with no DVD/hdd activitity, the system then hangs. The gray apple logo changes to a gray 'prohibited' logo. It's the logo of the circle with the slash through it. Like the kind you see over no-smoking signs.
I figured the hard drive was messed up and I decided to reinstall OSX cleanly. However when I booted from the CD by pressing 'c', the EXACT SAME symptoms above happened. It was at this point I started getting really worried. So I decided to remove the hard drive temporarily and boot from the CD just to make sure it really was booting from the CD. Unfortunately the exact same symptoms happened.
Out of desperation to make sure that my hardware was OK, I decided to install OS 9.2.1 which installed and WORKED perfectly. I also installed UbuntuPPC and Slackintosh versions of linux which also installed and worked perfectly.
The issue appears to reside with OSX. I've borrowed friends cd's of 10.2-10.3 and all of them will NOT install. They start to boot from the CD, but never even make it to the first window.
Help!!
Brad

Actually trying one stick in each individual slot was one of the first things I did. Unfortunately that did not provide a resolution for me.
Thanks for the links regarding the broken folder/prohibitory sign. I read those and they made mention of resetting the nvram and pram. I just did that a bit earlier today but logging into the open firmware by pressing Option-Command-F-O and typing: reset-nvram; set-defaults; reset-all.
Upon the reboot and after I plugged the hdd with OSX on it back into the system, the resolution was a bit off as I figured. But this time there was no progress indicator. Instead only the gray apple logo showed and there was no response from the hdd or cdrom drive.
I also noticed that the USB mouses red light went out within the first 45 seconds of booting. I swapped out keyboards and mice and the new ones did the same thing as well. I also tested the memory in an imac I have and OSX that is installed ont heimac works gerat with that stick of memory. I'm leaning towards the fact that the memory I have is fine, being that it was ordered from a company that specifically guaranteed it to work on macs of all kinds.
Any other thoughts or ideas?

'make /link ' errors during Oracle 11G install on Oracle Linux 5

tail /u01/app/oraInventory/logs/installActions2007-10-12_11-30-12AM.log
INFO: genclntsh: Failed to link libclntsh.so.11.1
INFO: make: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/product/11.1.0/oradb1/rdbms/lib/ins_rdbms.mk'. See '/u01/app/oraInventory/logs/installActions2007-10-12_11-30-12AM.log' for details.
Exception Severity: 1
Any helpful hint would be highly appreciated...Ramesh

Hi, Ramesh
Please refer to
Error in invoking target 'client_sharedlib' of makefile
Could you have the same condition ?
Regards
Jason

Oracle Install on Mandrake Linux 9.1 (Dell Laptop 600)

I have a full install of Oracle 10G running on a Dell Laptop using Mandrake Linux 9.1:
First I did an install of the OS, I built the swap file to be 2GIGs, the /oracle partition as 5GIGS and the /home partition as 25GIGS.
I made sure to choose the Development packages and the Office packages, I did not choose any of the WEB and other stuff.
As root, edit the file /etc/sysctl.conf. Add the following lines to the end of the file:
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
As root, issue the following commands at a terminal:
groupadd oinstall
groupadd dba
useradd g oinstall G dba oracle
passwd oracle <supply new password>
You then need to set up the new users environment variables. Edit the file /home/oracle/.bashrc and add the following between the # User specific aliases and functions and the # Source global definitions lines. In Mandrake Linux all I did was edit the /etc/profile file and add the below at the end. This way all users get the added. Works like a charm.
ORACLE_SID=lx10g
ORACLE_BASE=/oracle
ORACLE_HOME=/oracle/10g
PATH=$ORACLE_HOME/bin:$PATH:.
export ORACLE_SID ORACLE_BASE ORACLE_HOME PATH
You can choose what you like for the ORACLE_SID: it represents what you will eventually call your database.
Make install directories, In my case, for example, I did this:
mkdir /oracle
mkdir /oracle/10g
chown -R oracle:oinstall /oracle
First when you try to run the Universal Installer do the following:
./runInstaller -ignoreSysPrereqs (this gets you by the error on the OS)
Then just follow the normal screens and at the end you should have a complete system. There is a bug in the installer and you will need to re-run the ./runInstaller and selct just the ISQLPlus* and it will then only re-install this package. It seems it misses it during the initial install. I also suggest downloading the Compaign CD and installing the APACHE and HTMDB using the same as above when running the ./runInstaller as everything else is already setup.

check pre-requisites for a Linux OS here:
Installation Guide for UNIX Systems: AIX-Based Systems, Compaq Tru64 UNIX, HP 9000 Series HP-UX, Linux Intel and Sun Solaris Contents / Search / Index / PDF
http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
Remember that the OS has to be certified to install
Oracle sucessfully.
Joel P�rez

Error message with install of Oracle 9.2 on Mandrake Linux 9.0

Hi,
I hope somebody can help with this. I'm getting an error message during the installation for oracle 9.2 on mandrake linux 9. An error get thrown saying the IP address of a host cannot be determined.
Here is what is in the log:
*** Database Configuration Page***
TitleLabel = Database Configuration
Prompt = Select a database suited to your needs.
ConfigList = General Purpose,Installs a pre-configured database optimized for general purpose usage,Transaction Processing,Installs a pre-configured database optimized for transaction processing,Data Warehouse,Installs a pre-configured database optimized for data warehousing,Customized,Allows you to create a customized database. This option takes longer than the pre-configured options,Software Only,Installs software only and does not create a database at this time,
Selection = s_cfgtyperet = General Purpose
Setting value of s_dbcaProgressOnly to -progress_only
Setting value of b_autoStartApache to true
Setting value of b_launchNETCA to true
Calling query netQueries2.2.0.7.0 getHostIPAddress
Query Exception: UnknownHostException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
Anyone know how to resolve this error and whether or not it is very critical to the oracle installation?
Cheers
Johnny

Hi johnny,
You should first check the hosts file to see if the correct hostname and the IP address are shown. You can also check if the "hostname" command returns the correct result. If everything looks good so far, then next check if command "nslookup" returns the correct IP address. If the nslookup <hostname> command returns error, you will need to talk to the Domain Name Server (DNS) administrator to correct this network configuration problem.
Yogi

Creating Oracle Inventory Installation Step Does Not Finish and Hangs at 99% while installing Hyperion 11.1.1.4

Hi Guys,
Creating Oracle Inventory Installation Step Does Not Finish and Hangs at 99% while installing Hyperion 11.1.1.4.I'm running the installer from a local drive and also noticed that the uninstaller files are not created.The installer process has been running for 4+ hours.
Any suggestions/tips?
Thanks
Manoj

hi John,
we left the installer running overnight, but the install process has still not completed.Also it has not created any uninstaller files under the following directory:
E:\APPS\Hyperion\uninstall
what could be the reason for that?
Thanks.
Manoj

Why the Oracle 8.1.7 PE coundnot have error during start the install stage On Win98?

Why the Oracle 8.1.7 PE coundnot have error during start the install stage On Win98?Someone tell me that need one patch for win98,but where can I download it?
Thanks

Why the Oracle 8.1.7 PE coundnot have error during start the install stage On Win98?Someone tell me that need one patch for win98,but where can I download it?
Thanks

Windows 7 hangs during install on HP Pavilion a Media Center 1320n

Windows XP Media is currently on machine. I tried to install Windows 7 Ultimate Edition. When the computer rebooted the installation would hang during the complete installation. I tried several times and the same thing happened. I reformated the hard drive and tried to install the same OS using a USB flash drive and got the same results. I reformatted again and tried to install Windows Vista Ultimate Edition and got the same results. The only OS I can install on this machine is Windows XP. Can anyone tell me what needs to be done to install Windows 7.
I upgraded the Bios with version 3.24 before I began the installation.

Another update in case anyone might be having the same problem.. Found out what the problem is.. But still have not resolved it.. I did another fresh install of Win7. Joined the domain and rebooted. When it came back up I checked the network and sharing center. It is showing "Identifying". Start> Run> firewall.cpl . It is showing Public network as my current connection. I unplugged my network cable and plugged it back in. It now shows domain network. Log offs work fine. After reboot it goes back to doing the same thing. I tried with both DHCP and a static IP. Both ways, same problem. So it works fine if the location is set to domain network but not to public (which i guess it automatically puts it in to if it cant identify the network). Sometimes it will go to work network. Logoffs take roughly 30 seconds compared to 8 min. on a public network or 2 seconds on a domain network.
We do have a group policy that disables security center. It will disable the firewall and other features when it is set to domain network. But not for the work or public locations.
The other policy we have in place is for Kerberos. Kerberos is disabled by default in windows 7 but is needed for our SAP to work. When we run a packet sniffer on the machine it is showing a lot of back and forth traffic with our DC and the protocol just shows Kerberos. So my next test is to remove the GPO for Kerberos and see if that makes a difference.
The funny thing is; I have a Precision 380 sitting right aside of it. Running Windows 7, joined to the same domain, connected to the same switch, in the same OU and it doesnt have a problem..

I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast. Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue

I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast.
Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue when I rebooted. Here is the problem:
Every other time I boot the MacBook it hangs at a grey screen with the prohibitory sign. Verbose reveals a "still waiting for root device" error. Now if I reboot from that hang, it boots fine, but then will hang again the next time. It keeps alternating like this. Any ideas??
I am not running any third party trim software, so that's not the issue.

I have a MacBook 7,1 which i recently installed a PNY 250 SSD and added some RAM. The laptop was running awesome with OSX 10.6.8, lightning fast.
Then I installed Yosemite. There was a bit of hang during the install, but Yosemite came up no issue when I rebooted. Here is the problem:
Every other time I boot the MacBook it hangs at a grey screen with the prohibitory sign. Verbose reveals a "still waiting for root device" error. Now if I reboot from that hang, it boots fine, but then will hang again the next time. It keeps alternating like this. Any ideas??
I am not running any third party trim software, so that's not the issue.

11gr2 client installation hangs during client installation

hi
11gr2 client installation hangs during client installation during "perform pre-requisit test"-- what to do??
server oel 5.6
db 11gr2
client 11gr2
os win xp prof 32 bit
java jre 6u24
netbeans 6.9.1
kind regards
Edited by: SYSAPPSDBATSM(EBZ11,R12)1152046c on Mar 25, 2011 3:40 PM

hi
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Get view named [InstallTypesUI]
INFO: size estimation for InstantClientinstall is 174.04894161224365
INFO: size estimation for Administratorinstall is 1046.229476928711
INFO: size estimation for Runtimeinstall is 754.2802858352661
INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@1cf243b
INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
INFO: InstallTypesPane installType is: InstantClient
INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Loading view <InstallTypesUI> at state <clientInstallType>
INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
INFO: size estimation for InstantClientinstall is 174.04894161224365
INFO: size estimation for Administratorinstall is 1046.229476928711
INFO: size estimation for Runtimeinstall is 754.2802858352661
INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Install Type set in InstallTypeUI is : Custom
INFO: Validating view at state <clientInstallType>
INFO: Completed validating view at state <clientInstallType>
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@a16157
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [en]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Get view named [InstallLocationUI]
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@ba8fce
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: C:\Documents and Settings\DBA\Desktop\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: true
INFO: isNewHome= true isORCAHome=false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from C:\Documents and Settings\DBA\Desktop\win32_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/C:/Documents and Settings/DBA/Desktop/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/Documents and Settings/DBA/Desktop/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1046.229476928711
INFO: PATH has :==>C:\DOCUME~1\DBA\LOCALS~1\Temp\OraInstall2011-03-26_10-46-45AM\jdk\jre\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Common Files\NetSarang;C:\Program Files\PC Connectivity Solution\;C:\app\DBA\product\11.1.0\db_2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\WinSCP\;C:\Program Files\QuickTime\QTSystem\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_YES_CUSTOM_YES
INFO: Verifying route INVENTORY_YES_CUSTOM_YES
INFO: Get view named [CustomInstallUI]
INFO: Re-loading component config bean
INFO: Loading beanstore from jar:file:/C:/Documents%20and%20Settings/DBA/Local%20Settings/Temp/OraInstall2011-03-26_10-46-45AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.commons.base.util.ComponentConfig from jar:file:/C:/Documents%20and%20Settings/DBA/Local%20Settings/Temp/OraInstall2011-03-26_10-46-45AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
INFO: Resolving dependencies
INFO: View for [CustomInstallUI] is oracle.install.ivw.client.view.CustomInstallGUI@1473a2e
INFO: Initializing view <CustomInstallUI> at state <clientCustomInstall>
INFO: Completed initializing view <CustomInstallUI> at state <clientCustomInstall>
INFO: Displaying view <CustomInstallUI> at state <clientCustomInstall>
INFO: Completed displaying view <CustomInstallUI> at state <clientCustomInstall>
INFO: Loading view <CustomInstallUI> at state <clientCustomInstall>
INFO: Completed loading view <CustomInstallUI> at state <clientCustomInstall>
INFO: Localizing view <CustomInstallUI> at state <clientCustomInstall>
INFO: Completed localizing view <CustomInstallUI> at state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientCustomInstall
INFO: Completed executing action at state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Custom Install Selection. map = {}
INFO: Validating view at state <clientCustomInstall>
INFO: Completed validating view at state <clientCustomInstall>
INFO: Validating state <clientCustomInstall>
INFO: Completed validating state <clientCustomInstall>
INFO: Verifying route TO_ENDCUSTOM
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is [email protected]77
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: C:\Documents and Settings\DBA\Desktop\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: dba-077754d77ea:C:\DOCUME~1\DBA\LOCALS~1\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:dba-077754d77ea
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:1.9906GB (2087276.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: dba-077754d77ea:C:\DOCUME~1\DBA\LOCALS~1\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:dba-077754d77ea
INFO: Expected Value:130MB
INFO: Actual Value:12.5322GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:dba-077754d77ea
INFO: Expected Value:32-bit
INFO: Actual Value:32-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:dba-077754d77ea
INFO: Expected Value:1023
INFO: Actual Value:235
INFO: -----------------------------------------------
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]kind regards

OUI Hangs during Oracle 8i install on Mandrake 7.1

Similar Messages

Maybe you are looking for