Ouput Inside of PDF email is now Very Small

Hi,
We have our SAP ouput go through scot and become a PDF on a regular basis. All of a sudden the image inside the pdf is very small compared to what it was the day before. This happened on one day, about 3 weeks ago.
ECC 6.0
1) Checked for transports that day. Cant find anything.
2) Checked pdf1 device type, all looks good.
3) Checked format and basic X_PAper so no change.
4) The SAP spool seems to be formatted normally and not small. (before it becomes a PDF)
Cant figure out what would have changed to make this start happening all of a sudden.
Any ideas?
thanks
brad

Hi Brad,
I suposse its either a problem on the compression (SAP note 843480?) or with the reader itself. Do you get the same problem on other workstations with other versions of Adobe reader or the reader you are using?
Br,
Javier

Similar Messages

  • HT1688 The font on my phone's email just got very small....how do I change it back to original setting?

    All of a sudden the print on my emails has gotten very small and narrow.  How do I get it back to the original?

    Thank you....don't know why it changed itself, but now I got it back to where I like it.

  • One line on my comcast email compose has very small font. how to change just this line(subject line)

    Something has caused just this one line to be very small. It is a firefox issue as when I log in under internet explorer, does not occur

    Comcast says if it was their issue, it would repeat when using internet explorer, which it does not

  • Printing wide ABAP in PDF form leads to very small fonts

    Hi all,
    Our solution uses EP (NW2004s) as well as SAPGUI for HTML (ECC6), and printing is only through Front-end printing. Hence, we are only able to open the output in Adobe Reader and then print using the OS defined printers.
    This works fine for most ABAP lists, but if the list is very wide (eg. 400 columns), the output is still converted to a 210 X 279 MM PDF file, and the fonts have been shrunk terribly to fit into the page. Hence, is there any way to change the paper size of the pdf file (make it landscape for example), or to print the output in multiple pages.
    Thanks for the help!

    Hi,
    Pls try to use the Function Module   ARCHIV_CVT_OTF_2_PDF_SAMPLE
    and please let me know whether it solves the issue.
    We Shall look into it.
    Thanks
    Ravi Aswani

  • Email text size suddenly very small, uncontrolled font change

    Without warning, the text of incoming emails is suddenly very small.  The body of text is crowded into the left side of the screen.  And, old emails in the inbox are exhibiting the same behavior.  If you double tap the text, it resizes to fill the screen, but you shouldn't have to double tap every message to get it to read properly.  I have tried accessibility function and increased the font size, but that has not helped.  Reading email in landscape helps.   I recently turned on iCloud but then turned it off with respect to emails.  Cannot figure out why this is suddenly happening.   Help.

    Try quitting Mail.
    Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the Mail app until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.

  • PDF font is very small 75% in email

    Hi friends,
    I have created a classical report.
    Iam executing this report in Background, spool will generate and converting that spool into PDF format and sending mails to the client user id's.
    But iam getting some problem in PDF font, by default if am sending mail to the user id, the font of that PDF file is coming 75% which is very small.
    Now i want to increase the PDF font. For converting spool to PDF format iam using FM: CONVERT_ABAPSPOOLJOB_2_PDF
    passing spool number, output device and getting PDF output in a table IT_PDF_OUTPUT ( Like TLINE ).
    Can any one help me regarding this.
    Regards,
    Sekhar.

    Hi Shekar,
                    Have a look at this.
    Link:[PDFGuide|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8cd6adbb-0301-0010-39ba-938c601d5db9&overridelayout=true]
    Hope it helps your query to be resolved.
    Have a best day ahead.

  • Error in SAPscript pdf email attachment

    Hi All,
             I have implemented the functionality in ABAP where I can send SAPscript output to user via pdf-email in its inbox.The functionality is working fine in Dev n Test system with no issues.As the form is moved into Prod system, the user is complaining that after opening the mail of pdf, a mail is sent to unknown, unexisting email id indicating that user opened the mail.As the email id is unexisting, the user receives back the mail of Delivery failure.
    Please help in this.Rest is working fine.

    Hi Neeraj_C ,
      I have also a same requirement . i don't know much about Script.Can you please send me the procedure how do u achieve this scenario . If u give the sample code of this scenario it will be very helpful for me.
    Thanks & Regards,
    Kumaran Duraiswamy.

  • Problem pdf email attachment

    Hi Friends,
    I need expertise help in pdf email attachment. I have data in internal table which has to be sent as pdf mail attachment. I need help in converting the data to pdf format. After conversion I can use SO_NEW_DOCUMENT_ATT_SEND_API1 to send the mail.
    Expect earliest reply.
    Thanks,
    Nidhya

    Dear Friends,
    Thanks for your reply, but I need help in converting the data in internal table to pdf.
    Pls find my code below: With this code, I get email send with PDF attach, but the data inside the file is not in correct format.
    Pls help me to correct.
    DATA : mailrec    LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
           mailbin    LIKE solisti1 OCCURS 0 WITH HEADER LINE,
           mailbin1   LIKE solisti1 OCCURS 0 WITH HEADER LINE,
           mailtxt    LIKE solisti1 OCCURS 0 WITH HEADER LINE,
           mailhead   LIKE solisti1 OCCURS 0 WITH HEADER LINE,
           i_otf      LIKE solisti1 OCCURS 0 WITH HEADER LINE,
           i_pdf      LIKE solisti1 OCCURS 0 WITH HEADER LINE,
           mailstruc  LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
           maildata   LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
    DATA : BEGIN OF i_sotf OCCURS 0.
           INCLUDE STRUCTURE itcoo.
    DATA : END OF i_sotf.
    DATA : i_itcpo LIKE itcpo,
           i_itcpp LIKE itcpp.
    DATA : v_tlines   TYPE i,
           v_len_in   LIKE  sood-objlen,
           v_len_out  LIKE sood-objlen.
    maildata-obj_name = 'Document'.
    maildata-obj_descr = 'Transfer Details'.
    maildata-obj_prio = 1.
    maildata-doc_size = strlen( mailtxt ).
    mailstruc-head_start = 1.
    mailstruc-head_num = 0.
    mailstruc-body_start = 1.
    mailstruc-body_num = 1.
    mailstruc-obj_name = 'transfer'.
    mailstruc-doc_type = 'RAW'.
    APPEND mailstruc.
    mailrec-receiver = '[email protected]'.
    mailrec-rec_type = 'U'.
    APPEND mailrec.
    CLEAR i_itcpo.
    i_itcpo-tdgetotf = 'X'.
    REFRESH mailbin.CLEAR mailbin.
    WRITE 'Report Title:' TO mailbin-line+3.
    WRITE sy-repid         TO mailbin-line+18.
    APPEND mailbin. CLEAR mailbin.
    WRITE  'User : ' TO mailbin-line.
    WRITE  sy-uname TO mailbin-line+11.
    APPEND mailbin. CLEAR mailbin.
    WRITE  'Date of Report : ' TO mailbin-line+3.
    WRITE sy-datum USING EDIT MASK mask MM/DD/YYYY TO mailbin-line+21.
    APPEND mailbin. CLEAR mailbin.
    WRITE  'Time of Report : ' TO mailbin-line+3.
    WRITE  sy-uzeit TO mailbin-line+21.
    APPEND mailbin. CLEAR mailbin.
    APPEND mailbin.
    WRITE  'Transfer ' to mailbin-line+3.
    APPEND mailbin. CLEAR mailbin.
    APPEND mailbin.
    WRITE  sy-uline TO mailbin-line+3.
    APPEND mailbin. CLEAR mailbin.
    LOOP AT i_disp.
    SHIFT i_disp-index LEFT DELETING LEADING '0'.
    WRITE i_disp-index TO mailbin+3.
    WRITE i_disp-pernr TO mailbin+6.
    WRITE i_disp-ename TO mailbin+16.
    WRITE i_disp-persk TO mailbin+57.
    WRITE i_disp-btrtl TO mailbin+60.
    APPEND mailbin. CLEAR mailbin.
    ENDLOOP.
    CALL FUNCTION 'SX_OBJECT_CONVERT_SCR_OTF'
      EXPORTING
        FORMAT_SRC            = 'RAW'
        FORMAT_DST            = 'OTF'
        DEVTYPE               = 'POSTSCPT'
        FUNCPARA              = ''
        LEN_IN                = v_len_in
    IMPORTING
       LEN_OUT               = v_len_out
      TABLES
        CONTENT_IN            = mailbin
        CONTENT_OUT           = mailbin1
    EXCEPTIONS
       ERR_CONV_FAILED       = 1
       OTHERS                = 2 .
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    REFRESH mailbin.
    CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
      EXPORTING
        FORMAT_SRC            = 'OTF'
        FORMAT_DST            = 'PDF'
        DEVTYPE               = 'POSTSCPT'
      FUNCPARA              =
        LEN_IN                = v_len_in
    IMPORTING
       LEN_OUT               = v_len_out
      TABLES
        CONTENT_IN            = mailbin1
        CONTENT_OUT           = mailbin
    EXCEPTIONS
       ERR_CONV_FAILED       = 1
       OTHERS                = 2 .
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    REFRESH mailbin1.
    DESCRIBE TABLE mailbin LINES v_tlines.
    mailstruc-head_start = 1.
    mailstruc-head_num = 0.
    mailstruc-body_start = 1.
    mailstruc-body_num = v_tlines.
    mailstruc-transf_bin = 'X'.
    mailstruc-doc_type = 'PDF'.
    mailstruc-obj_name = 'Mid-month transfer'.
    mailstruc-doc_size = v_tlines * 255.
    APPEND mailstruc.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        DOCUMENT_DATA                    = maildata
       PUT_IN_OUTBOX                    = 'X'
      TABLES
        PACKING_LIST                     = mailstruc
       OBJECT_HEADER                    = mailhead
       CONTENTS_BIN                     = mailbin
        RECEIVERS                        = mailrec
    EXCEPTIONS
       TOO_MANY_RECEIVERS               = 1
       DOCUMENT_NOT_SENT                = 2
       DOCUMENT_TYPE_NOT_EXIST          = 3
       OPERATION_NO_AUTHORIZATION       = 4
       PARAMETER_ERROR                  = 5
       X_ERROR                          = 6
       ENQUEUE_ERROR                    = 7
       OTHERS                           = 8 .
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    But i dont get the result in expected format. I am not getting first 2 characers of the line. instead of report, date, time in separate line I get everything in a single line as follows :
    Report Title: ZHRPY0003
    er : VACNIDHYA Date of Report : 02.05.2007 Time of Report
    : 10:31:27 Mid-month Inter-Company Transfer
    --- 1 00002609 Carla Pineda FT
    2010
    - 1 -

  • Dunning PDF email file name

    hi,
    i am executing Dunning letters through F150, and there is a functionality to send the letters to an email id.
    Problem is, earlier, the pdf file recieved in email had a descriptive file name , dunning.pdf.
    But now it is showing some system generated file name like, ATT3125.pdf, and it keeps changing everytime the email is sent. Please help..!!

    Hello Imran,
    If I am not wrong, the extension of dunning files is OTF and not PDF. (I too have faced it earlier)
    This happens when the format conversion is not configured correctly in SCOT.
    Specify the output format for SAP Scripts/SmartForms as PDF
    Preferably, Inform your Administrator to rectify the setting. That should solve your problem.
    Regards
    Vijay Gajavalli

  • PDF email archives: How to selectively re-export to new archive/.pst?

    A while back, I made PDF email archives of a variety of Outlook folders, and eventually deleted the Outlook messages in question.
    Now, unfortunately, I am wishing I had not.  So, a few "save the day" type of questions:
    1) Can I convert an entire PDF email archive, or portions of an archive, back into Outlook format?  How?  (If you know the answer to this, ignore the rest!)
    2) Can I selectively search a PDF email archive, and then group-export the messages displayed in the search results into a separate PDF email archive? How?  I can manage to use the filters to select a group of messages, but I can't manage to re-export them to a new archive or a PDF portfolio.
    thanks,
    Erik

    It cannot be done in InDesign, but, as you surmised in Acrobat.
    You'll need to ask in the Acrobat forums. I don't know of any changes like that in Acrobat DC but because I don't program in JavaScript, I might have overlooked it. Try one of these forums:
                                 Creating, Editing & Exporting PDFs                        
                                 Rich Media & 3D                        

  • Why is the font on my email very small?

    Since installing os x maverick, my incoming email has extremely small fontl. It is small when I print it out. This message has very small font. I manually enlarged it. It seems the default now is 10pt or smaller.

    One thing to try:  Mail, Preferences, Fonts & Colors, Message Font. 
    You may have to quit and relaunch Mail to get the new font choice to take consistently.

  • How to link to a page inside a PDF file?

    PDF users,
    I can link to a PDF file from a web page, for example, with the <a href> tag. Is there a way to link to somewhere inside the PDF file, for example to a page number or a heading title?
    Yours,
    Michael F
    ========

    Hi,
    I lost track of this note but I need to revisit the nameddest option.  I can get the page option to work but would like to link to chapter headings to avoid having to adjust the page options whenever the page count changes.
    I am using Acrobat XI and generate PDF bookmarks from Framemaker 12. The file opens with the bookmark panel to the left and content to the right. I don't see the Named Destination panel that you mentioned. On the left there are icons for page thumbnails, bookmarks, attachments, and signatures.
    I display the bookmarks panel and adjust the content of the bookmark labels as needed. With the right click menu, I use Set Destination to adjust the part of the page that displays at the top of the panel.
    Now could you tell me exactly how this nameddest option works?
    For example, I have a PDF file with "2: Introduction": as the bookmark that opens to the first page of chapter 2, which is on page 21.  The link in the web page is:
    <p>For an introduction, refer to <a href="docs/93-0967-0.pdf" target="_blank">chapter 2</a>
    What do I need to do to make the link go to that chapter?
    Yours,
    Michael F
    ========

  • New document: How to avoid known PDF email attachment problems

    Have you ever had problems with PDF attachments sent from Adobe Reader for iOS using Share > E-mail Document?
    You may find this document useful to avoid the problems.
    How to avoid known PDF email attachment problems
    Please let us know if you have encountered different types of problems with PDF attachments.  We can look for solutions or workarounds for you.

    Unfortunately, we (Adobe Reader mobile team) do not know if/when Apple will fix the attachment problems (software defects) in Apple Mail.
    In particular, the attachment problem with Microsoft Outlook (See Problem #2 in How to avoid known PDF email attachment problems) appears to be a long-standing defect that has been known for years.  However, Apple has not provided any fix for Apple Mail yet.
    Adobe Reader for iOS merely launches Apple Mail (the default mail app on iOS) to send a PDF document as an attachment.  Adobe Reader has no control over whether or not to embed a preview image of an attachment in the body of an email message, which is known to cause the problem with Microsoft Outlook (on the receiving side).  The same problem happens when you send a single-page PDF document as an attachment along with an email signature from Apple iBooks on iOS.
    For now, all iPad/iPhone users can do is to avoid the problems by using the workarounds that are described in How to avoid known PDF email attachment problems.
    When new and different problems with PDF attachments are reported by Adobe Reader for iOS users, we will update the document above.
    Sorry for the inconvenience.

  • Acrobat can not open pdf email attachment

    Acrobat 8 Professional.<br /><br />A user gets this error message when he tries to open up a pdf email attachment:<br /><br />"Acrobat could not open <File Name> because it is either not a supported file type or because the file has been corrupted (for example, it was sent as an email attachment and wasn't correctly decoded)."<br /><br />I can open up the attachment without any issues.<br /><br />Anybody else have this issue?

    Yes, Ron Green here at the NYS Insurance Department. I now have two clients and counting that have somewhat of an identical problem.
    Client #1 has Adobe 8 Professional installed on his pc which is running Widnows XP Professsional. Files are scanned using a XEROX MFP network scanner and client is able to open those scanned documents within adobe and then saves them to a network share. Problem arises whenever he attempts to attach the saved document to another application. Once he attempts viewing the scanned document at that point Adobe blows up with the same error message stating the file is corrupt.
    Client #2 has Adobe 9 Reader but is still able to follow the same network scanning scenario aforementioned but encounters the exact same problem when attempting to attach the scanned PDF documents.
    Is there any type of fix out there for this???

  • Can't open PDF email attachments from mail app. (iOS7, iPad2)

    Since upgrading to iOS7 I cannot open PDF email attachments from the "Mail" app. The attachment appears as a "tap to download" icon, after downloading it appears as an image of the first page of the PDF. An extended press of the PDF image results in "save image" and "copy" options, but no "open in" option.
    I have tried closing and re-opening mail, restarting the iPad, several different attachments. Still no "Open in" option.
    Any help with this?

    I work in a support organization and we've seen variations of this issue develop on various iphones and ipads with ios7.  Oddly, not everyone is experiencing this, just some people.
    In my own case, I simply downloaded Acrobat Reader for free and can read the things fine.
    We use an exchange activesync email server and when each email comes in it indicates at the very bottom that it has been downloaded as plain text and to click to download the entire message.  I've tried clicking to download and not clicking and I can read the PDF either way.
    In my own case I can view PDF files and/or also save them by pressing and holding the icon of the PDF in the email.
    The other thing one of our end users noticed: if she emailed the PDF directly to her iPhone5 and iPad it would not be readable but if she forwarded it to her offsite Yahoo account and then forward to her corporate email it would open.
    I think there's definetely something going on with the formatting of the PDF (was it created by a true Adobe PDF distiller or one of the many clones?), what email application attached it? (Outlook, Eudora, IOS Mail, etc) and how many PDF reading apps are on your IOS devices?
    For instance I have the default PDF reader, iBooks, Kindle, Adobe Acrobat Reader, and there may be others that I don't even know has PDF capability.   Only Apple probably has a good idea of how many apps utilize this.
    Message was edited by: aliensporebomb - clarification

Maybe you are looking for