Ouput type and the date
Dear Experts
I hope you all are doing well
i encountered one issue with the invfoicig
To print invoicing using VF31, the value for the field Date/time in output type must be 3.
Configured default value for dispatch time to 3 but the
Output ZRDO created automatically, Date/Time is still defaulted to 1
so i deleted the output type then create output type manually, Date/time is defaulted to 3. Is this a bugs ?
please advise me the cause and the solution
thanks
hi,
can u try this
in tcode: NACE-> click V2(shiiping)-> output type ikon(on th top)->select LDOO-> go inside here in Default values-> <b>dispatch time</b> :select"3" & save->
goto to tcode--->VV21 u will find date & time has 3 by default
hope this helps you
regards,
Arun prasad
Similar Messages
-
The type and the length of the members of the structures
I am making the BC-XAL program.
Reading `XAL_Interface_Documentation_11.pdf', now I succeeded in "Reading All Saved Monitor Sets" and "Reading All Monitors of a Monitor Set". but I can't find the type and the length of the member of the Structure BAPITNDEXT, so I cannot get the Monitoring Tree of a Monitor.
where can I get any documents or information ?This is how it looks in my 46c system.
MTSYSID SYSYSID CHAR 8 0R/3 System, name of R/3 System
MTMCNAME ALMCNAME CHAR 40 0Alert: name of monitoring context
MTNUMRANGE ALTIDNUMRG CHAR 3 0Alert: monitoring type number range (perm., temp, ...)
MTUID ALTIDUID CHAR 10 0ALert: Unique Identifier for Monitoring Types (used in TID)
MTCLASS ALTIDMTCL CHAR 3 0Alert: monitoring type class (perf., single msg.,...)
MTINDEX ALTIDINDEX CHAR 10 0Alert: internal handle for TID
EXTINDEX ALTIDINDEX CHAR 10 0Alert: internal handle for TID
ALTREENUM ALTREENUM INT4 10 0Alert: MT Tree info: Number of tree
ALIDXINTRE ALIDXINTRE INT4 10 0Alert: Tree Info: Index of MT in Tree
ALLEVINTRE ALLEVINTRE INT4 10 0Alert: Tree Info: Level of MTE in Tree
ALPARINTRE ALPARINTRE INT4 10 0Alert: Tree Info: Index of Parent of MT in Tree
OBJECTNAME ALMOBJECT CHAR 40 0Alert: Name of Monitoring Object
MTNAMESHRT ALMTNAMESH CHAR 40 0Alert: Short Name of Monitoring Type
CUSGRPNAME ALCUSGROUP CHAR 40 0Alert: Customization: Name of Customization Group
DELIVERSTA ALDELIVSTA INT4 10 0Alert: MT Val: Delivery Status
HIGHALVAL ALVALUE INT4 10 0Alert: alert value (1 = green, 2 = yellow, ....)
HIGHALSEV ALSEVERITY INT4 10 0Alert: severity (alerts, monitoring type custom..)
ALSYSID SYSYSID CHAR 8 0R/3 System, name of R/3 System
MSEGNAME ALMSEGNAME CHAR 40 0Alert: name of monitoring segment
ALUNIQNUM ALAIDUID CHAR 10 0Alert: Unique Identifier to be used in AID (char10)
ALINDEX ALINDEX CHAR 10 0Alert: internal handle
ALERTDATE ALDATE DATS 8 0Alert: date
ALERTTIME ALTIME TIMS 6 0Alert: Time value in timeformat
DUMMYALIGN ALDUMMYC2 CHAR 2 0Alert: Dummy field. Purpose: Alignment of date/time 16 byte
LASTVALDAT ALDATE DATS 8 0Alert: date
LASTVALTIM ALTIME TIMS 6 0Alert: Time value in timeformat
LASTVALDUM ALDUMMYC2 CHAR 2 0Alert: Dummy field. Purpose: Alignment of date/time 16 byte
ACTUALVAL ALVALUE INT4 10 0Alert: alert value (1 = green, 2 = yellow, ....)
ACTUALSEV ALSEVERITY INT4 10 0Alert: severity (alerts, monitoring type custom..)
VALSYSID SYSYSID CHAR 8 0R/3 System, name of R/3 System
VMSEGNAME ALMSEGNAME CHAR 40 0 Alert: name of monitoring segment
VALUNIQNUM ALAIDUID CHAR 10 0 Alert: Unique Identifier to be used in AID (char10)
VALINDEX ALINDEX CHAR 10 0 Alert: internal handle
VALERTDATE ALDATE DATS 8 0 Alert: date
VALERTTIME ALTIME TIMS 6 0 Alert: Time value in timeformat
VALERTDUM ALDUMMYC2 CHAR 2 0 Alert: Dummy field. Purpose: Alignment of date/time 16 byte
COUNTOFACT ALCNTACTAL INT4 10 0 Alert: MT Val: Count of active Alerts
COUNTSUM ALCNTSUMAL INT4 10 0 Alert: MT Val: Sum of Alerts in MT
VISUSERLEV ALVISILEVL INT4 10 0 Alert: MTE type dev cust: Visible on user level (op,exp,dev)
TDSTATUS ALTDSTATUS INT4 10 0
Alert: MT: Type Def Status
Welcome to SDN.
Regards,
Rich Heilman -
Report for special prourement type and GR date
Hi Gurus,
Is there a report in SAP that gives us the special prourement type for a material and the date which they were goods receipted into our stock?
thanks
AnushaNo std report available for this kind of seleciton
either youhave to write the query or custom program
make joint with MSEG adn MARC for query -
What is the matrial type, and the view are..
hi .export , what is the martial type, and the view are..
please briefly explain it ,
thanks
shivDear Samal,
Material Type:
A grouping together of materials with the same basic attributes such as raw materials, semifinished products, or finished products.
All materials must be assigned to a material type which determines:
Whether the material is intended for a specific purpose such as a configurable material or process material
Whether the material number can be assigned internally or externally
The number range from which the material number is drawn
Which screens appear and in what sequence
Which user department data you may enter
What procurement type the material has; that is, whether it is manufactured in-house or procured externally, or both
Views:
Freely definable text describing the logical screen in the screen sequence in more detail.
Regards
Utsav -
Must have the same type and the same length
hi experts,
DELIVERY_PLANT data type STRING //from proxy class, can't be changed
BEGIN OF ty_citem,
article type matnr,
werks type werks,
END OF ty_citem,
LOOP AT it_items INTO lv_item.
lv_citem-article = lv_item-article.
lv_citem-werks = lv_item-DELIVERY_PLANT.
APPEND lv_citem TO GT_citem.
clear lv_citem.
ENDLOOP.
SELECT matnr werks
from marc
into table GT_marc
for all entries in GT_citem
where matnr = GT_citem-article and werks = GT_citem-werks.
error message here:When you use the addition "FOR ALL ENTRIES IN itab", the fields "WERKS"
and "GIT_CITEM-WERKS" must have the same type and the same length.Hi,
You know for statement FOR ALL ENTRIES in where clause data type and length should be match.
As per my understanding ,here GT_citem-werks is a string. But you know data type of WERKS_D is char with lencth 4.
Use the below select statement.
SELECT matnr werks
from marc
into table GT_marc
for all entries in GT_citem
where matnr = GT_citem-article and werks = GT_citem-werks+0(4).
Thanks.
Subhankar -
Lost the access to the first partion of the firewire drive and the data ?
Hello to everybody,
after i moved 5,5GB Data from my internal harddisk, HFS+ , to my external Firewire drive, FAT 32 formatted for compatilibilty with a PC, i lost the access to the first partion of the firewire drive and the data. At first after having appearently finished copying the data a lot of ununderstable numbers and letters appeared on the first partion and couldn't be opened.
Using first aid showed the following messages:
1.
volume „disk2s5“ testing
** /dev/disk2s5
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
Root directory doesn't start a cluster chain
Error: the basic (????? ) process shows an error by finishing (-9972)
German original message:
Fehler: Der zugrundeliegende Prozess meldete einen Fehler beim Beenden. (-9972)
2.
volume „disk2s5“ testing
** /dev/disk2s5
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
Root directory doesn't start a cluster chain
Error: the basic (????? ) process shows an error by finishing (-9972)
German original message:
Fehler: Der zugrundeliegende Prozess meldete einen Fehler beim Beenden. (-9972)
Volume „FIRE2“ testing
** /dev/disk2s6
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
16 files, 726592 free (1880420 clusters)
Volume „FIRE 3“ testing
Mounting Disk** /dev/disk2s7
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
149 files, 2866032 free (441271 clusters)
Volume „FIRE 4“ testing
Mounting Disk** /dev/disk2s8
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
2755 files, 1396016 free (873683 clusters)
3 Volumes tested
0 HFS-Volumes tested
2 Volumes with an other type than HFS tested
1 Volume couldn't be tested
1 Volume wasn't tested
3.
First Aid interrupted the testing of "disk2s5" because the the following error has appeared:
the basic (????? ) process shows an error by finishing
German orignal message:
Das Festplatten-Dienstprogramm hat überprüfen „disk2s5“ unterbrochen, da der folgende Fehler aufgetreten ist:
Der zugrundeliegende Prozess meldete einen Fehler beim Beenden.
As i translated the First Aid messages from german to english they will probably look a bit different in english but i hope you get the idea.
So what can i do to regain access to the first partion and the data ?
If i have to use the terminal then please !!! step by step as i don't have any experience in using it
Greetings and thanks in advance for any hints
Lutz
PD: i was just arranging my data into different categories so could later burn a backup when this happened
g4 AGP 400 MHz Mac OS X (10.3.9) 768 MB SDRAMYep, you sure can. That's how I support my family's computers. I just entered their dynamic hostname in ARD, and it always updates their IP address in the ARD list should they have changed.
-
Link between output type and the email id in me22n ?
Hi,
Can anyone plz explain the link between the output type and the email id maintained in the address data in ME22n ?
The output type is configured fo rsending Email .Whenever i maintain the email id in the address data the outptu type gets triggered automatically but if I leave it as plank the output type does not get triggered.
Can any one explain this dependency?
thanks in advance
regards,
AshwinHi,
It depends on the output record that you have used, what is the key?
It is no different that printed POs where the Printer Id is not specified in the communications tab of the output record. If the systen can't find where to send the output to it will not generate the record.
If it did generate the record without the email address, what would you expect to happen? Where could it send it?
It is far better to get the warning message "unable to determine ......" that to simply save the PO without the email addrerss.
So I would simply see the warning message as an indication that the email address is missing and fill it in before saving.
Steve B -
Hi
How can I add 2 new metadata-fields to every photo in iPhoto ?
The new fields should state the age of my kids in years and months based on the date that they were born and the date that photo is taken.
Exampel:
My son is born 01.01.2010
My daughter is born 01.01.2012
Photo taken by data
Aage of son
Aage of daughter
01.07.2011
1 year 6 month
not born yet
01.01.2014
4 year 0 month
2 year 0 month
I would like to be able to search by kids age and get the info displayed when doing slideshows.
How to do this in iPhoto ?
Any alternatives to accomplish the same ?
Kind regardsIt can't be done with iPhoto. There are some DAM (digital asset management) applications that can write to other IPTC fields that iPhoto can't read. One such app is Media Pro 1.
However you would have to calculate the age for each date and add it to one of the fields. There are online age calculators that can do that for you: Age Calculators
If you go thru that much trouble then use iPhoto, make the calculations and add the age to the Description field. Then you can use Smart Albums to search for 1year 6 month text.
OT -
I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx
This might help: http://support.apple.com/kb/HT1495.
-
I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
2/12/03 16:04 13567
2/13/03 10:15 35678
So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.evolution wrote in message news:<[email protected]>...
> How can I save my data and the date,the time into the same file when
> I run this VI at different times?
>
> I use a translation stage for the experiment.For each user in the lab
> the stage position (to start an experiment) is different.I defined one
> end of the stage as zero. I want to save the position , date and time
> of the stage with respect to zero.I want all these in one file, nd
> everytime I run it it should save to the same file, like this:
> 2/12/03 16:04 13567
> 2/13/03 10:15 35678
>
> So I will track the position from day to day.If naybody helps, I
> appreciate it.Thanks.
Hi,
I know the function "write to spreadsheet file.vi"
can append the data
to file. You can use the "concatenate strings" to display the date,
time as well as data... Hope this help.
Regards,
celery -
How do i see a list of the apps that have been downloaded and the dates and times and amounts? Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill. HELP!!
See this -> http://support.apple.com/kb/HT2727
-
I am getting below error message while search crawl in sharepoint foundation 2010 search for only .VSD files and not for any other docs type.
The filtering process could not be initialized when trying to process this item. Verify that the file extension is a known type and the item is not corrupt.
I have installed the Microsoft Filter Pack 2.0 in search server but still i am getting the same error.
<//span>
Any one's help will be appreciated.
Regards,
Rashmi
Rashmi SinghalHi Rashmi,
1. Checked the file extension is added or not to the search file types.
2. Checked file name has any invalid characters.
3. Resetting the crawl index and run a full crawl .
Best Regards.
Kelly Chen
TechNet Community Support -
When updating my iphone 4 for the first time I seem tohave lost all of my apps and the data on my apps. One of these apps was a camera and all of my photos are gone!! I had over 1000 pictures mostly of my children. I cant find them anywhere. Please help! How do i get all of my apps back with all of the data that was on them?? Thank you, LEC
app store - update - purchased - all/not on this phone - select the app you want to download by clicking on the cloud next to it.
-
I am unable to delete music from my iPhone5 either directly or via PC. On the iPhone the tracks disappear when swiping left and deleting but the phone remains full and the data is still visible on the PC. The music was installed on the phone from the backup of a previous model but with the addition of new tracks I am now unable to add more or update to the next operating system as the phone is full. On my PC the music is still there and but the neither the delete function or any form of sorting/management on the music files is functional. Other Apple products work OK including previous phone, ipad.ipods etc Any advice/help available to get past this would be appreciated.
I think it is 7.1.1 - there was another update today which I've uploaded but it didn't make any difference. It's just the music libary on the 5 that's causing me problems.
-
Urgent - Idoc type and the Message type
Hello
Its very urgent. I want to know the basic idoc type and the message type used for EDI 894 transmission (Delivery / Return Base Record). Please respond at the earliest.
Thanks in advanceHI
Pratibha
How are you ?
Please check the below links:
http://scn.sap.com/thread/990524
http://www.erpgreat.com/pm003.htm
http://scn.sap.com/thread/1386811
http://scn.sap.com/thread/1078741http://www.erpgreat.com/plant/what-is-equipment-master.htm
http://benxbrain.com/en/index.do?onInputProcessing%28brai_object_thread%29&001_threadid=0000835100&001_boardtype=01&sysid=PI1&pgmid=R3TR&object=TABL&obj_name=EQBS&child_param=
Mutti
Maybe you are looking for
-
Issue while changing validity date for assigned roles: SAP IDM 7.2 SP8
Hello Experts I assigned the Task on repository for validity modification for Roles as in below screenshot: When I modify the role validity, Task defined for Validity modification doesnt get triggered and IDM executes the tasks defined as Modify Task
-
Adapter Module for SOAP Sender
Hi, Any alternative way to create adapter module for soap sender? Regards, Farooq
-
I am attempting to print a number of DL size envelopes using Word 2010 and Excel2010 on a HP Officej
I am attempting to print a number of DL size envelopes using Word 2010 and Excel 2010 on a HP Officejet 6500A Plus printer in Operating system Windows 7. Using the mail merge facility the printer reports a paper mismatch. Word does not appear to have
-
hi i am using javabean in a jsp page. where do i keep the beans class files in weblogic server6.1?
-
Hi Experts We are trying to integrate BW and XI. We can successfully send the data from Oracle to BW via XI. A webservice type of data source is used in BW and the problem we are having now is that once the data is sent, the PSA (corresponding to th