Our Company data missed in SAP IDES system

Hi friends,
In our SAP IDES ECC 6.0 EHP 5 system some data had missed(some plants had missed) in 800 client, I checked 000 client here also no data..we don't have any backup. If I download the IDES from market place, then is it possible to get entire data of 000 & 800 clients. Could you please any one help me how to get our data back..
Thanks in Advance
Regards,
Venkatesh B

Thanks Rajendra and Shailendra ,
Actually I do have same openion about this issue, But my manager simply told me download it and install. he also dont know about this issue.
Any way Thanks for afford ur valueble time for me.
If got any solution then I'll post here...
Regards,
Venkat

Similar Messages

Company data missed in SAP IDES system

Hi friends,
In our SAP IDES ECC 6.0 EHP 5 system some data had missed(some plants had missed) in 800 client, I checked 000 client here also no data..we don't have any backup. If I download the IDES from market place, then is it possible to get entire data of 000 & 800 clients. Could you please any one help me how to get our data back..
Thanks in Advance
Regards,
Venkatesh B

Hi,
Thanks for your replay.
Finallyw e decided to reinstall IDES.. now my doubt is, what is the difference between sap IDES system installation and normal sap installation..
and what softwares need to dowload for ides..
and if any one have full ides installation guide please share me..
Regards,
Venkat

Configure Web Services in a SAP-IDES-System?

Hello,
I have access to a SAP-frontend on a SAP-IDES-System and now Iu2019d like to configure two Web Services in SAP. I think I can do this configuration with SPRO, but I donu2019t really know how and where.
Is there a good documentation about Web Services in SAP IDES?
Thanks a lot!

Hi,
Have a look at below link.
http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/57/07813ee3d32b44e10000000a114084/content.htm
I sure it will help you out
Rgds
Radhakrishna D S

Regarding access key for modify predifined fm in SAP IDES System

hai to all,
How can i find
access key for modify predifined fm in SAP IDES System
i have sap 4.7 dump(IDES)
please give reply asap.
thanks in advance,
regards,
surya.

Hi Chandran,
Thank you for the reply,
how can i access this site, its asking username password,
i didn't have both of these and even i'm unable to register also.
how can i access.
please respond
regards,
surya.

How can we access R/3 data remotely from SAP APO system?

Hi Experts...!
I want to access R/3 data (i.e, some ZTABLE data) remotely from SAP APO system. Can any one give some solution regarding this ?
Regards
Rayudu

Hi,
Please try this FM RFC_READ_TABLE.
Regards,
Ferry Lianto

Data connection from SAP-R3 System to Xcelsius using Web Services

Hello Everybody,
Anyone tryed connecting data from SAP-R3 System to Xcelsius using Webservices? (created in ABAP function module)
SDN downloaded document says to Generate Webservice URL through ABAP (by creating function module) and import it in xcelsius
Data -> Add Web service connections
by giving the URL to import. After giving the web server login credentials, the error says 'Unable to load URL'
Any idea would be great help
Note: I tried by following the thread & its not working:
http://forums.sdn.sap.com/thread.jspa?threadID=1520321
Thank you,
Anand
Edited by: Anand Amirtharaj on Feb 20, 2012 7:51 AM
Edited by: Anand Amirtharaj on Feb 20, 2012 7:53 AM

Hi,
With regards to your statemetn "SDN downloaded document says to Generate Webservice URL through ABAP" <- can you tell me more please? references/links/attachment?
As far as I am aware, that the type of web service required for integration it a 'normal' Netweaver Web app server web service.
There are limitations about the complexity of the WSDL - see Notes:
1653655 - Limitations in Web Service WSDL URL usage in Xcelsius 4.0
1703839 - Limitations of Web service usage in Xcelsius / Dashboard Design
also , changes between SAP versions requires reworking the WSDL
Note 1625091 - The WSDL URL for web service which generated in SAP Enterprise Central Component cannot be loaded into Xcelsius
regards,
H

CRM IDES Exports data into existing Non IDES System?

Hello,
Is it possible to import SAP CRM IDES data using IDES Exports into any existing non IDES SAP CRM System without re-installation? The thing is that we already have some data in two clients (client 100 and 200) and we don't want to loose it and recently we have received IDES DVD's and would like to have this data as well. So, is there any way to get this IDES data without re-installation?
Thanks and Regards,
Vasu

No.
An installation doesn´t know anything about "clients", sapinst deletes the database if it exists and then loads the data from the export DVDs.
Markus

FICA -IDOC for posting the billing data from NON-SAP ISU system

Hi,
Kindly note we are implementing NON-SAP ISU with SAP FICA for the finance implementation. In this context, we ahve identified BAPI for BP and CA. We have decided to go for transaction posting through the transaction FPE1. For this, we are looking for the transaction data IDOC which is CTRACDOCUMENT_ACCOUNT (FICA Posting) in the WEDI. But it seems that it is not yet released. Can anybody help me out for this to either identify the equivalent IDOC or other method to post the data from Banner system (NON-SAP ISU ) system. We are presently not implmenting billing system in SAP ISU, but only FI system

Hi,
you can create the same...
but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
or else follow some conventions if you are just starting the things..
HTH
Rajesh

Kernel Upgrade for old SAP Ides system

HI,
How I need to install 4.6c Kernel 4.6d patch level 948 on the following system
SAP Ides - R/3 4.C
SAP Package level 534
Support Package Manager version 4.6c/0028
Oracle 8.1.7.0.0
ABAB Load 1258
Kernel 46D
Could someone please tell me what I need to download and the steps
THanks in advanced.

Hi Tin,
FYI, per SAP marketplace support site information:
"Mainstream maintenance for SAP R/3 4.6C ended on December 31, 2006.
From January 01, 2007 to December 31, 2009, SAP offers extended maintenance for this release."
To download the support packages for your R/3 4.6C release:
1- Got the area <a href="http://service.sap.com/patches">SAP marketplace Patches download area</a>
2- In the left side navigation, select '<i>Archive for Support Packages and Patches</i>', then '<i>Entry by Application Group</i>'
3- In the component list, select '<i>SAP Application Components --> SAP R/3 -> SAP R/3 4.6C'</i>
4- You should then see the list of patch components for 4.6C and add them to your download basket
Hope this helps.
Regards,
Joseph

Line incomaptibilty betwwen RAW and CHAR data types in SAP Unicode System.

Hi Gurus,
I am working in SAP Unicode system.
We have transferred the standard programs for Non-Unicode to Unicode system.
In one standard function module, <table name> is defined in TABLES parameter as a type of TLINE structure, which has two fields - one is 132 length CHAR and other is 2 length CHAR.
In the same function module , one subroutine is being called, for which <table name> is passed.
But in the FORM of subroutine, this table is defined as a type of HLINE, which has only one field - 134 length RAW data type.
So due to confilct in data types ( CHAR and RAW ) , I am getting an error that both data types are not line compatible.
Do i need to use casting concept to remove the error.
Please suggest me the way to handle this.

hi,
declare the table as same data type.
dont go for any other types.
if you still want the form table as HLINE, then before the form call declare a varibale with TLINE data type pass the values to HLINE.
i think this will be little complex, because again it will be type incompatablity.
we can forcefully pass the values to HLINE with a class.
but i think no need, declaring with same data type might be easy.
Thanks
Vinod

Master data from Multiple SAP source systems

Hi Gurus,
In my present project we are having an ECC6 and r/3 from which we need to extract master data.
ex: vendor
same vendor has different entities in the systems.
I am aware of the data inconsistency as it would be overwritten.
We don't want to use MDM,compounding or transfer duplicate records options.
MDM - not in use
Compounding - expensive Option
transfer duplicate records - not reliable
Merging r/3 in to ECC6 is also under consideration but it would be late 2010.
I am sure some of you might have been through this scenario and your help is appreciated and will be rewarded.
Thank you,
Ram.

We went with Compounding option.
Can you justify Expensive ????
We compounded 0LOGSYS,infact you can use 0SOURCESYSTEM.
So that 0SOURCESYSTEM will have the server details.I mean your ECC6 or R3.
or
Some crude solution would be add some character to the beginning of your master data like from ECC 6 append E.
or
Have you heard of Consolidated infoobjects Concept.You can go with that too.
Hope this helps.
Edited by: Praveen G on Oct 1, 2008 9:04 AM

Master Data cleansing and transformation from non-SAP source systems

Hi all,
Our client (Media)wants to cleanse and transform his master data from non-SAP source system to be uploaded into BW (no R/3 yet). If anybody has a document regarding this topic that i could use, i will appreciate if u sent it to me.
thanks.

Hi,
https://websmp203.sap-ag.de/~sapidb/011000358700001965262003
https://websmp203.sap-ag.de/~sapidb/011000358700006591612001
https://websmp203.sap-ag.de/~sapidb/011000358700001971392004
https://websmp203.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000471477&_OBJECT=011000358700008927932002E
/manfred

SAP (ECC) extractor to transfer data into Non SAP System

Hi Experts,
Scenario : We had a requirement to decommission the existing SAP BW system and merge it into Non SAP BI system (say MSBI).
Existing BW system getting data from standard extractor and populating till cubes.
Now If this SAP BW system will be decommissioned and all the data needs to be moved to new Non SAP System BI.
What will be the approached for this smooth transfer.
Will SAP (ECC) std extractor will be used to move the data into non SAP BI system ? How ?
Any documentation and experience will be helpful.
Thank-You.
Regards,
VB

Hi VB,
First you need to identify that your MSBI system support BCI(business content integration) method. For example Informatica support BCI and provide RFC plugins to integrate with SAP. If your MSBI support BCI method then you can use standard dataextractors to extract data in new BI system. You will also need to plan the reporting model and how the extracted data will be feeded in your BI datamodel/reporting side. You may use some transformation reference from your existing SAP BI system.
Thanks
Amit

Data load into SAP ECC from Non SAP system

Hi Experts,
I am very new to BODS and I have want to load historical data from non SAP source system into SAP R/3 tables like VBAK,VBAP using BODS, Can you please provide steps/documents or guidelines on how to achieve this.
Regards,
Monil

Hi
In order to load into SAP you have the following options
1. Use IDocs. There are several standard IDocs in ECC for specific objects (MATMAS for materials, DEBMAS for customers, etc., ) You can generate and send IDocs as messages to the SAP Target using BODS.
2. Use LSMW programs to load into SAP Target. These programs will require input files generated in specific layouts generated using BODS.
3. Direct Input - The direct input method is to write ABAP programs targetting on specific tables. This approach is very complex and hence a lot of thought process needs to be applied.
The OSS Notes supplied in previous messages are all excellent guidance to steer you in the right direction on the choice of load, etc.,
However, the data load into SAP needs to be object specific. So targetting merely the sales tables will not help as the sales document data held in VBAK and VBAP tables you mentioned are related to Articles. These tables will hold sales document data for already created articles. So if you want to specifically target these tables, then you may need to prepare an LSMW program for the purpose.
To answer your question on whether it is possible to load objects like Materials, customers, vendors etc using BODS, it is yes you can.
Below is a standard list of IDocs that you can use for this purpose to load into SAP ECC system from a non SAP system.
Customer Master - DEBMAS
Article Master - ARTMAS
Material Master - MATMAS
Vendor Master - CREMAS
Purchase Info Records (PIR) - INFREC
The list is endless.........
In order to achieve this, you will need to get the functional design consultants to provide ETL mapping for the legacy data to IDoc target schema and fields (better to ahve sa tech table names and fields too). You should then prepare the data after putting it through the standard check table validations for each object along with any business specific conversion rules and validations applied. Having prepared this data, you can either generate flat file output for load into SAP using LSMW programs or generate IDoc messages to the target SAPsystem.
If you are going to post IDocs directly into SAP target using BODS, you will need to create a partner profile for BODS to send IDocs and define the IDocs you need as inbound IDocs. There are few more setings like RFC connectivity, authorizations etc, in order for BODS to successfully send IDocs into the SAP Target.
Do let me know if you need more info on any specific queries or issues you may encounter.
kind regards
Raghu

Connect from SAP gateway to RFC server failed - Java StandAlone app X SAP RAC System

Dears,
I'm developing a Java application (RFC SERVER) with JCo3 and I need to connect to SAP RAC system.
I have configured the TCP/IP connection via transaction SM59, but when I try to start my server I face the error below (dev_jco_rfc.trc):
==========================================================================================
**** Error file opened at 20140714 112024 Brasilia Time Rel 3.0.10 (2013-08-08) [720.440]
Error: >Mon Jul 14 11:20:24,636<    RfcException: [null]
    message: Connect from SAP gateway to RFC server failed
Connection parameters: TYPE=A DEST=VSPAGUE ASHOST=cpe1601 SYSNR=01 SAPROUTER=/H/155.56.49.28 PCS=1
LOCATION    SAP-Gateway on host ld7624.dmzwdf.sap.corp / sapgw01
ERROR       hostname 'cpe1601' unknown
TIME        Mon Jul 14 16:20:25 2014
RELEASE     740
COMPONENT   NI (network interface)
VERSION     40
RC          -2
MODULE      /bas/740_REL/src/base/ni/nixxhl.cpp
LINE        193
DETAIL      NiHLGetNodeAddr: hostname cached as unknown
COUNTER     3
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
==========================================================================================
This problem happens when my app executes the line:
JCoServer myServer = JCoServerFactory.getServer(myServerName);
My system properties:
jco.client.lang=EN
jco.destination.peak_limit=10
jco.client.client=800
jco.client.passwd=********
jco.client.user=********
jco.client.sysnr=01
jco.destination.pool_capacity=3
jco.client.ashost=/H/155.56.49.28/H/cpe1601
jco.server.connection_count=3
jco.server.gwhost=/H/155.56.49.28/H/cpe1601
jco.server.progid=VSPAGUE
jco.server.gwserv=sapgw01
jco.server.repository_destination=VSPAGUE
Using SAP Logon i can connect to server cpe1601 system E16 without problems.
Please, I really need some help, because my knowledge on SAP platform is minimum.

Hi Markus,
Changing ASHOST=ld7624.dmzwdf.sap.corp as you have suggested, I got the error message: Connect to SAP gateway failed ...
As you could see, the host I'm connecting is from SAP RAC Service.
Here in our company we have only SAP Logon and my RFC Application, and I can connect to SAP remote system via SAP Logon with this settings:
System Connection Parameters
Description: SAP ECC 6.0
Application Server: cpe1601
Instance Number: 01
System ID: E16
SAProuter String: /H/155.56.49.28/H/
Below the connection information I received from SAP RAC SUPPORT for testing purposes:
    E16 System:
    SID: E16
    Client: 800
    System Number: 01
    Server: cpe1601
    Component Version: SAP ERP Central Component 6.0 Enhancement Pack 6 Suite on HANA
    User: ********
   Password: ********
   SAProuter String:
   If you don't plan to use SAPRouter at your end,
   /H/155.56.49.28/H/

Our Company data missed in SAP IDES system

Similar Messages

Maybe you are looking for