Our first time

So, you may have gathered from the title; My wife and I have started this beautiful journey into the social, collective, artist and eccentric communities which are more along our lines of topics and events. We are both artists, my wife a painter and sketcher as well as musicians, myself have a passion for capturing life in the moment with photography, and writing. I must say, we consider ourselves lovers of the artistic world and not professionals therein.....but we're trying. We have a son age 18 months who has special needs, we rather look at him as a blessing that has enriched our lives and has helped us grow in our humanities and philanthropic journey.
W@e look forward to sharing,growing and enlightenment along our journey. Thank you and blessing for having us.

I don't remeber but I don't think you need to do any thing as DBA, however; check out this document,
http://www.oracle-base.com/articles/9i/XMLDB9i.php
Also below is the URL to XDB stuff
http://download-west.oracle.com/docs/cd/B19306_01/appdev.102/b14259/toc.htm
Good luck
Fariba

Similar Messages

  • HT204053 Our family has several apple devices, iPad, touch, and now iMac, our original iTunes are all under a different apple id.  do we keep our own accounts even in cloud? do we all have access to each others media? (First time out with all this..)

    Our family has several apple devices, iPad, touch, and now iMac, our original iTunes are all under a different apple id.  do we keep our own accounts even in cloud? do we all have access to each others media? (First time out with all this..)

    There is no problem about using one ID for iTunes, iTunes in the Cloud and iTunes Match, and another for iCloud and its email and syncing facilities. This way you can all use the same iTunes account but have separate emails and calendars etc.

  • TS3276 Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones ar

    Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones are ok

    Well I am feeling a bit silly now because that was all I had to do. In the past Workgroup Manager had always opened right up to the list of my users, I never even thought to click on that but apparently that was all that was needed.
    I still am not sure how the iChat Server preferences changed themselves on me, but it is not the first time I have had weird "settings" issues with our Snow Leopard Server.
    Thanks!

  • I recently built a new windows PC for the first time. My (new) wife and I both have itunes accounts, which we would like to use under different windows accounts on same PC. However, when I try to download my wife's songs it gives me an error.

    I am recently married to a wonderful woman and just built a windows PC for the first time. The idea was that we would (sorta) both be able to get a new computer out of it as we would each have a different account under windows. One of the first tasks was to migrate over our iTunes libraries. I did mine with no problem, but now that I'm try to do hers, I'm getting an error message saying "if you download past purchases with your Apple ID, you cannot auto-download or download purchases with a different Apple ID for 90 days."
    What's the best solution for this? I want my wife to be able to use the new computer under her windows account just like it's her new computer, to the extent possible. I don't want our two iTunes accounts to be fighting each other and causing problems because they are on the same physical machine. What to do? Surely this can't be the first time this has happened - where two people each want to have their own iTunes account on the same computer.
    This is the latest version of iTunes (12.0.1.26) running on Windows 8.1.

    Drrhythm2 wrote:
    What's the best solution for this? I
    Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

  • First time an SQL expression is placed on report a DB SELECT executes

    The same problem can be created using the normal Crystal Reports XI Release 2 developer environment and/or code (not only a code issue). I'm using CR XI.
    Symptom:
    We dynamically auto generate SQL Expressions, Tables, Joins, Formula's and anything through C# and place it onto the Crystal Report through code via run-time user input in a web environment. I recieved a notification from one of my DB admins that crystal reports is causing massive memory consumption via unknown SELECT statements that have no joins and/or WHERE criteria.
    Some Detective Work/More Info:
    After using Microsoft "SQL Profiler" along with Crystal, I understand what is happening but don't know the "work around" to make Crystal stop executing the following SELECT scenario.
    Anytime I create a new "SQL Expression" for the first time and then physically "drag and drop" it onto the report then Crystal is executing a "silent" SELECT statement against the database in the design environment. I'm calling it "silent" because I need MS SQL Profiler to see it happen. I'm guessing that this is used for validation or something but this is causing problems when automatically generating a report in a production environment.
    Steps to re-create:
    1. Open MS "SQL Profiler" and get it running. (will show Crystal Engine silently executes the SELECTS)
    2. Add a new "SQL Expression" to your report.
    3. Drag and Drop your new "SQL Expression onto your report
    4. You will see that Crystal has created an SQL query and executed it against your database in design environment.
    The Problem:
    I can see under normal circumstances why you might want this funtionality (if it's actually used for the Crystal Engine to validate your SQL Expression). But, What also makes this functionality horrible is that on my behalf Crystal is creating these SELECT statements and using cross joins which is a major problem in a production environment. As a result, huge record sets are being created on our DB Server. I don't believe that this has any purpose in a production evironment when the cross-joins can create huge amounts of results just for the sake of Crystal Internally validating a new SQL Expression placed onto a report. It would be nice to disable this functionality in production. I don't know a "work around" since these SELECT queries are created on my behalf by the Crystal Engine at design time (via code auto generation in production).
    Questions:
    Can this functionality be disabled to prevent a production server from incurring the execution of these queries?
    Anybody else notice this and have a "work around"?

    This is a cross post of:
    1st time an SQL expression is placed on report a DB SELECT executes
    Please do not cross post. See the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement].
    The above post has been moved to the Crystal Reports Design forum, thus locking this thread.
    Ludek

  • First time an SQL expression is placed on report a DB SELECT executes -CRXI

    The same problem can be created using the normal Crystal Reports XI Release 2 developer environment and/or code (not only a code issue).
    Symptom:
    We dynamically auto generate SQL Expressions, Tables, Joins, Formula's and anything through C# and place it onto the Crystal Report through code via run-time user input in a web environment. I recieved a notification from one of my DB admins that crystal reports is causing massive memory consumption via unknown SELECT statements that have no joins and/or WHERE criteria.
    Some Detective Work/More Info:
    After using Microsoft "SQL Profiler" along with Crystal, I understand what is happening but don't know the "work around" to make Crystal stop executing the following SELECT scenario.
    Anytime I create a new "SQL Expression" for the first time and then physically "drag and drop" it onto the report then Crystal is executing a "silent" SELECT statement against the database in the design environment. I'm calling it "silent" because I need MS SQL Profiler to see it happen.  I'm guessing that this is used for validation or something but this is causing problems when automatically generating a report in a production environment.
    Steps to re-create:
    1. Open MS "SQL Profiler" and get it running. (will show Crystal Engine silently executes the SELECTS)
    2. Add a new "SQL Expression" to your report.
    3. Drag and Drop your new "SQL Expression onto your report
    4. You will see that Crystal has created an SQL query and executed it against your database in design environment.
    The Problem:
    I can see under normal circumstances why you might want this funtionality (if it's actually used for the Crystal Engine to validate your SQL Expression). But, What also makes this functionality horrible is that on my behalf Crystal is creating these SELECT statements and using cross joins which is a major problem in a production environment. As a result, huge record sets are being created on our DB Server. I don't believe that this has any purpose in a production evironment when the cross-joins can create huge amounts of results just for the sake of Crystal Internally validating a new SQL Expression placed onto a report. It would be nice to disable this functionality in production. I don't know a "work around" since these SELECT queries are created on my behalf by the Crystal Engine at design time (via code auto generation in production).
    Questions:
    Can this functionality be disabled to prevent a production server from incurring the execution of these queries?
    Anybody else notice this and have a "work around"?

    duplicate - please do not post multiple times

  • How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

    How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
    When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro.  What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
    WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
    NOTE:  If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
    Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did.  He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
    Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse. 
    THIS IS WHAT YOU WILL NEED TO DO:
    First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
    down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up.  If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it.  Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

    I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
    I have a Linksys WRT320N I used for the initial Charter setup.
    I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
    Hasn't caused any issues so far but one thing I did notice.
    On the Linksys there were 3 DNS servers listed.
    The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
    I tried everything above, but light on modem still flashes yellow.
    I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
    I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

  • How to prevent a first time login prompt for an external application.

    Hi,
    I'm doing a Portal iFS integration project. We managed to login to our iFS application via an external application definition in the Login Server. We created a JSP screen to create iFS users. In the back-end java-code uses the Portal API to create a Portal user. When this new user uses the external application link for the first time he gets a Portal screen to supply the external username/password combination. Can someone answer the following questions:
    1. How can I customize the layout of this first time external application login screen just like the you can customize the standard portal "login/change password" screens ?
    2. Is there an API to specifiy the external username/password combination for a specific portal user and specific external application in advance in order to prevent the firsttime login screen ?
    Any help/answers would be great. We need to implement this in a few weeks.
    regards,
    Willem-Pieter van der Lugt

    There is an API -- WWSSO_PSTORE_EX which is in $IAS_HOME/portal30/admin/plsql/sso/ssopsex.pks which includes APIs
    for accessing the password store. Please see the package specification here, which is not wrapped. This API is generally private to the SSO schema, but it is granted for EXECUTE to the
    PORTAL30_PS schema - which is the schema provided for access to the password store.
    To add a users credentials to the store, you would use the pstore_add_user_info procedure...
    PROCEDURE pstore_add_userinfo
        p_app_id     IN VARCHAR2
      , p_ssouser    IN VARCHAR2
      , p_app_user   IN VARCHAR2
      , p_app_pwd    IN VARCHAR2
      , p_fname1     IN VARCHAR2 DEFAULT NULL
      , p_fval1      IN VARCHAR2 DEFAULT NULL
      , p_fname2     IN VARCHAR2 DEFAULT NULL
      , p_fval2      IN VARCHAR2 DEFAULT NULL
      , p_fname3     IN VARCHAR2 DEFAULT NULL
      , p_fval3      IN VARCHAR2 DEFAULT NULL
      , p_fname4     IN VARCHAR2 DEFAULT NULL
      , p_fval4      IN VARCHAR2 DEFAULT NULL
      , p_fname5     IN VARCHAR2 DEFAULT NULL
      , p_fval5      IN VARCHAR2 DEFAULT NULL
      , p_fname6     IN VARCHAR2 DEFAULT NULL
      , p_fval6      IN VARCHAR2 DEFAULT NULL
      , p_fname7     IN VARCHAR2 DEFAULT NULL
      , p_fval7      IN VARCHAR2 DEFAULT NULL
      , p_fname8     IN VARCHAR2 DEFAULT NULL
      , p_fval8      IN VARCHAR2 DEFAULT NULL
      , p_fname9     IN VARCHAR2 DEFAULT NULL
      , p_fval9      IN VARCHAR2 DEFAULT NULL
      , p_user_prefs IN VARCHAR2
    );Note that you should provide p_app_pwd as cleartext, and the API encrypts it before storing.

  • Mobile Accounts: Sync new accounts first time only.

    When a user logs into a computer for the first time it is set to create a mobile account, however we don't use home directory syncing because the typical size of our 200 users' home directories is over 100Gb which makes syncing home directories not viable.
    It would be very handy, though, to have it sync the first time only at login so that our user directory template is automatically copied over which will save a lot of time setting up new users.
    Accoring to Apple's User Management v10.5 documentation on page 203:
    +"To initially sync local and network homes so that the network home folder replaces the local home folder, choose “Create home with default sync settings."+
    (This refers to Workgroup Manger -> Preferences -> the Mobility pane -> Account Creation -> Creation tab)
    After testing, though, it is quite clear that this does not work - at least on my setup. I can get it to work by going to the Rules tab in the Mobility pane and ticking the sync at login and logout, but this syncs every time on both login and logout, which is not what I want to achieve.
    Any ideas?

    I also mentioned, that some Safari-Extensions I installed on the iMac are missing now on my iMac-Profile. I also mentioned, that some settings for 1Password are reset to default values.

  • Cache and performance issue in browsing SSAS cube using Excel for first time

    Hello Group Members,
    I am facing a cache and performance issue for the first time, when I try to open a SSAS cube connection using Excel (using Data tab  -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users
    system (8 GB RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
    We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cubes - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after
    daily cube refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (16 GB RAM), it takes 2 odd minutes to open the cube.
    Is there, any way we could reduce the time taken for first attempt ?
    Best Regards, Arka Mitra.

    Thanks Richard and Charlie,
    We have implemented the solution/suggestions in our DEV environment and we have seen a definite improvement. We are waiting this to be deployed in UAT environment to note down the actual performance and time improvement while browsing the cube for the
    first time after daily cube refresh.
    Guys,
    This is what we have done:
    We have 4 cube databases and each cube db has 1-8 cubes.
    1. We are doing daily cube refresh using SQL jobs as follows:
    <Batch xmlns="http://schemas.microsoft.com/analysisservices/2003/engine">
    <Parallel>
    <Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
    <Object>
    <DatabaseID>FINANCE CUBES</DatabaseID>
    </Object>
    <Type>ProcessFull</Type>
    <WriteBackTableCreation>UseExisting</WriteBackTableCreation>
    </Process>
    </Parallel>
    </Batch>
    2. Next we are creating a separate SQL job (Cache Warming - Profitability Analysis) for cube cache warming for each single cube in each cube db like:
    CREATE CACHE FOR [Profit Analysis] AS
    {[Measures].members}
    *[TIME].[FINANCIAL QUARTER].[FINANCIAL QUARTER]
    3. Finally after each cube refresh step, we are creating a new step of type T-SQL where we are calling these individual steps:
    EXEC dbo.sp_start_job N'Cache Warming - Profit Analysis';
    GO
    I will update the post after I receive the actual im[provement from UAT/ Production environment.
    Best Regards, Arka Mitra.

  • I want to create for the first time ever an iPhoto library on my Mac Mini from all of my seperate external hard drives over the years. Instead of filling my Mac Mini hard drive space with all of the pics can I import it to a seperate Apple hard drive.

    I want to creat for the first time on my Mac Mini an iPhoto library. I have many seperate hard drives with pics I want to import but are concerned I will fill the hard drive with pics alone. Can I install the pics on one larg (1TB) external apple hard drive and use iPhoto functions still with the pics being installed on a seperate drive from the iPhoto OS?

    This is our resident iPhoto guru, Terence Devlin's, advice:
    You can move your iPhoto Library to an external disk:
    1. Quit iPhoto
    2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Once that is done you can import directly into the iPhoto library on the external HD.

  • BW Upgrade - Starting Prepare for the First Time

    Hi,
    I'm starting the prepare for the first time and I received this message "You must be BD2ADM to run this command."  I login as BD2OFR.
    I'm trying to upgrade our BW 3.1C with kernel 640 to NetWeaver 2004 SR1.
    Do you have any solution for this problem I cannot continue with the prepare.
    Thanks,
    Ramon

    Hi Ramon,
    I ran into the same error ... (but it was very late night and therefore I don't know if I did something wrong and I forgot to talk to SAP on this)
    But:
    - For the 7.00 Upgrade you NEED sidofr and not sidadm!
    - I used the following workaround - run with sidofr -:
    SAPUP UPGDIR('/usr/sap/put') PARMLIST('check')
    (instead of prepare - which is the same - with this trick the first error message was "skipped")
    Regards
    Volker Gueldenpfennig, consolut.gmbh
    http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de
    P.S.: Sorry SAP collegues, that I didn't mention this issue, but I'm always (when it is not midnight) using the SAPup-prepare above and therefore rarely see this problem.

  • Download .jnlp file when first time

    Hi Everybody,
    I am new bee for java web start.
    We are having swing application which we want to distribute through Java Web Start. Client can run application through provided web link. we also want to download .jnlp file to the client machine when user clicked the link first time.
    I go through different thread for the above problem in this forum, but though not getting clear idea as in our application, we need to generate dynamic .jnlp file. All solution posted for the above problem assuming that .jnlp file exists at some location, but in our case we have to generate it when user clicked it first time. Any body having some idea ?
    Our second problem is, can it possible that user will run the swing application only when he click the link provided on the web server ? In our case authentication of user is done in our web application and when user will click the provided link user id and other information will be pass to swing application as parameters through .jnlp file. If that application will available offline user can run it through last downloaded .jnlp file without clicking the link , which will be not allowded. Also we are concern about multi user environment, as we are thinking to dynamic generation of .jnlp file , it may possible that other user running the same application noted .jnlp file version difference and will download the .jnlp file of other user ?
    Can any body have any idea, how can we done the above scenario ?
    Thanks in advance,
    Dimpal

    If you upgrade to Java 1.4.2 it will present a dialog asking for desktop
    integration the first time you start the application.
    Maybe that's what you want?

  • Using web.show_document the first time makes new browser window lose focus

    Hi,
    In our application we use show_document(url, '_blank') to open our reports (as pdf) in a new window.
    Our environment is Application Server 10g Release 2 with Forms 10g Release 2 and jinitiator 1.3.1.22.
    The first time I call a report, the new browser window containing the pdf is shown but loses focus after about 1 second. The focus is then returned to the applet window. When calling a report again it always keeps the focus.
    After closing the applet window and restarting the application, the same thing happens: first report called loses focus, all others keep the focus.
    Does anyone have any idea why this is happening? We want the focus to stay on the new browser window every time...

    Hi Jeroen,
    I m also facing a problem something similar to yours. If you got any solution please let me know.
    Problem-
    Currently my application is running on Forms 9.0.4.2 and my form calls another third party which displays the image in image viewer in new browser. When user clicks on the button to display image, then I m using the following Code -
    -- Method: displayDocuments ([Ljava/lang/String;)Ljava/lang/String;
    FUNCTION displayDocuments(
    obj ORA_JAVA.JOBJECT,
    a0 ORA_JAVA.JARRAY) RETURN VARCHAR2 IS
    BEGIN
    args := JNI.CREATE_ARG_LIST(1);
    JNI.ADD_OBJECT_ARG(args, a0, '[Ljava/lang/String;');
    RETURN JNI.CALL_STRING_METHOD(FALSE, obj, 'com/hli/imaging/adapter/LK_FormsImagingAdapter', 'displayDocuments', '([Ljava/lang/String;)Ljava/lang/String;', args);
    END;
    Image is displaying fine but the focus is staying on the newly opened browser. I want it to get back the focus to the forms window.Is this possible ???
    Thanks in advance
    Sai                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Is it possible to execute a Bookmarked query the first time a page is rende

    Hi,
    We are in the process of creating certain dashboards for our product using Endeca.
    We have defined some metrics in the Metric Bar component, and want some useful information to be visible to the user the first time the user comes to this page.
    As of now, these metrics look to be very generic in nature, but give useful information once the user starts searching. Some examples of these Metrics are - Supplier Count, Category count, etc. These won't make much sense to the end user without a context. Hence, we want this context to be present the very first time the user comes to this page.
    The easiest solution seems to be creating a Bookmark, and being able to execute that the first time the page renders.
    Is this possible to do? If yes, how?
    Also, are there any other ways to achieve this result, other than using the Bookmark component?
    Thanks,
    Amit

    The easiest solution seems to be creating a Bookmark, and being able to execute that the first time the page renders.
    Is this possible to do? If yes, how?To achieve this option, first create the bookmark and then under action within the bookmark portel click on Create Link. Copy everything after the question mark. Next go to manage package and paste the copied text into the Query String text box.
    Also, are there any other ways to achieve this result, other than using the Bookmark component?Option two would be to utilize deep linking method to access the page.
    Hope this helps.

Maybe you are looking for