Our ipad 1 goes to a black screen periodically when using the internet.

Our iPad 1 goes to a black screen periodically when using the internet. We have to hit the home button and hope we end up back at the site we were previously at. We have updated the iPad, but it still happens. Any suggestions on a solution?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset  ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Similar Messages

  • When using the internet, my web browser window goes blank

    It does this quite often:
    When using the internet, the web browser screen will go completly blank after 2 secs of loading.
    I will see the page, then after two seconds it is gone, and the web browser is completely white.
    Once, one page or tab does it, all the others start doing it.
    It is very frustrating, and happens quite often.
    Does this happen to anyone else, and does anyone know why or how to fix it??

    The next time you have the problem, note the exact times when it starts and ends: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Scroll back in the log to the time you noted above. Post any messages timestamped during that interval – the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Thinkpad Yoga - screen wear when using the pen

    I've been using penabled laptops for about 8 years now and bought a ThinkPad Yoga about 10 month ago.
    The pen turned out to be disappointing - it's a lightweight job reminiscent of the pens they include with Samsung Note and like phablets rather tha a proper full size Wacom pen.
    Just like other people I was also disappointed by the non removable plastic sheet protector on the screen in place of proper Gorilla glass screen cover.
    But well, overall, apart from the awful touchpad, it was a decent laptop and I've been always happy with my previous Thinkpads, so I kept it.
    Now, I'm using the pen a lot, incliding for scrolling. It turned out that the nib is not replaceable and that the plastic sheet protector on the screen is not hard enough to resist wear from the included pen - after 10 month of use it's pretty badly worn, especially in the scrolling area on the right.
    I've never had this issue with my previous penabled tablets, even after 3-4 years of use, so I must say I'm rather disapponted at Lenovo selling this as a penabled laptop when the screen could not stand up to daily use with the included pen.
    Does anyone else have this issue? Should I send it back to Lenovo to get the protective layer replaced while it's still under warranty?

    I had this very problem with my Yoga S1 display screen. The anti-glare foil/protector became scratched by the digitizer pen. After reading a bunch of posts about removing this film layer, it looked easy enough, so I decided to JUST DO IT.  My steps:
    I grabbed a sharp razor blade and started in the corner where the "Lenovo" logo is placed (bottom left). Very gently, I slid the blade edge under the film being careful not to dig, pry, or lift the blade any more than necessary -- just keep is as flat as possible and glide slowly about 1/2" or so making an equilateral triangle shape. The corner of the film will lift up losing its adherence and, in my case, I experienced zero damage. 
    I elected to continue sliding the blade along all four edges only 1/8" or so deep - just to make sure that the film was lifted across the entire perimeter. No problems whatsoever - smooth as silk. 
    I went back to the starting corner and slid the blade a little further (approx. an inch) so that there would be a triangular section large enough for my fingers to grab without cracking or breaking the film layer. 
    I began pulling from that corner slowly and gently making sure that my other hand was resting on the glass as a brace. Note that you should pull level with the screen not upward. I did not use a blow dryer and, as it turned out, it wasn't necessary. 
    When I got to the point  where one edge of the film was about at the center of the short width, I started pulling down that side until I reached the opposite corner. 
    I then continued pulling lengthwise working from edge to edge, then center, always keeping my other hand pressing lightly on the display screen glass (for leverage). If you want to avoid palm prints, wear a soft glove or put a microfiber cloth under your hand. 
    In no time at all, the entire sheet of film was removed in one piece - no cracks, breaks, or other problems. 
    There was no glue residue on the glass, so I just took a microfiber cloth and rubbed it to a gorgeous shine. 
    I fired up the laptop and was amazed at the extra clarity and color -- and NO SCRATCHES!
    Is there additional glare? Yes, of course, but I just tilt the screen to avoid it as I do with all my other devices. 
    I started working with the digitizer pen and, thus far, I see no evidence that it will scratch the screen surface which, I have been advised, is gorilla glass. 
    This entire process took less than 15 minutes. It has taken me longer than that to write it up!  
    I would be happy to answer any questions if there are any. Good luck! 
    Ken

  • Can you connect an iPad mini to an iPhone through Bluetooth to use the internet on the iPad? Thanks!

    I used to connect my iPod touch to my former phone, a Nokia, via bluetooth and it allowed the iPod to connect to the internet.
    Is it possible to do this with a non- cellular iPad Mini and an iPhone?
    Thank you

    Yes you should be able to or by wifi, here is the information about the iPhone hotspot if you need more information http://support.apple.com/kb/HT4517

  • My Ipod Touch 4g doesn't want to restore, and is stuck in DFU mode with black screen! When in the restoring process i get Error 1618, can someone help?

    My ipod touch got disabled and it said to connect it to itunes. It didnt want to recognize it so i try to restore it. Everything when good i downloaded the newest ipod software, it reach the loading bar in the ipod but didnt load anything. Then it turn off and the Error 1618 appear on Itunes can someone help me fix it???

    Try a hard reset and see if you can get the Apple logo to light up.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • My iphone 4s goes to a black screen when in use of any apps. after the update to ios6 any ideas for a fix?

    Since i updated to ios 6 my iphone goes to a black screen when it is in use. I could be texting and 5-10 sec later it goes to a black screen and than to the home page. Its also will be when playing games and so on. Can you please help me with this? I have tried resetting my phone, press the home button 2 time and canceling any running apps and even press home and powering button and still does the same thing. I need help!!!! Any suggestions?????

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • My iPad air keeps crashing and freezing when browsing the internet . Please help :(

    My husband and I updated to the new OS. Now our iPad Air's keep crashing and freezing whilst browsing the internet.  We have done a reset and swiped away pages but nothing is helping. Its very frustrating Can anyone help? Thank you Jo

    Please tell me that it has NEVER been jailbroke.  If it has not been jailbroke, here are some standard repair procedures:
    First, confirm that this is what you did for a "reset."  Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, since you have IOS-7, read this.

  • My new ipad 2 freezes after using the internet for about 15 minutes. It is properly connected to the network and works fine after I re-start it but it is very annoying to have to re-start it every so often. All other laptops on the internet work fine.

    My ipad 2 freezes when using the internet. Re-starting the ipad fixes the problem but it is very annoying to have to do this. I have tried all of the trouble shooting suggestions including re-joining the network. All other laptops work fine on my network. I think there is something wrong with my new ipad.

    I recommend two things before taking your iPad back to the Apple Store.
    1.  Fully close safari, by going to your home screen, then double tapping your home button to bring up your most recently used Apps.  Using your finger, hold it on any of the used Apps until they jiggle.  At this point, you'll see a to the top left of each App.  Touch the sign on Safari, which will fully close it.
    Then.......
    2.  Reboot your iPad.  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (hold past the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart.  You won't lose any settings or data.
    If that does not help, then make an appointment at the Apple store to have your iPad checked.

  • Does anyone find that the new iPad Air sounds sort of "hollow" when using the pad?

    Maybe I don't know what I am talking about, but I feel like when using the iPad Air, it seems a bit hollow when using the screen pad or basically just using it in general. My last iPad (the latest one before the Air) seemed like it was more quality. Does that make sense?

    Yes it does have a slightly hollow sound when you tap the screen. This is because the screen is made a bit differently than the older ones...there's a gap between the layers in the screen, which causes the sound you're hearing...it's completely normal on the Air. I took my Air back tho! It's awesome but just a bit big for my taste. I'm hoping the Mini comes soon!
    And I don't know why Kappy is saying the speakers can't do the low frequency so well. The speakers on the Air produce a way better sound than earlier gens..including low frequencies.
    cheers

  • My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?

    My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
    Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My ipad 2 turnes to black screen with the apple icon in the middle, it just hanged and i have to restart it?! so why this is happening ?! is there is an error or something i can do to prevent doing this ?!

    my  new ipad 2 turnes to black screen with the apple icon in the middle while using it or if i just left it locked for a while, it just hanged and i have to restart it?! so why this is happening ?! is there is a productio error or something i can do to prevent doing this ?!
    Appreciate responding as soon as possible.

    No, it's definitely not normal. Your User's Guide recommends a series of troubleshooting steps to go through when your iPad is misbehaving: As you're already in effect doing the first of the main steps, a Restart of your iPad, and that's not curing it, move on to the next .. a Reset.
    To do this, press and hold both the Home and the Sleep/Wake buttons for about 10-12 seconds, until the display blanks and the red Power Off slider appears. Continue holding the buttons until the slider disappears, replaced by the black screen and white Apple logo.
    This shows your iPad is starting to reboot. Release the buttons and allow the process to continue until the Lock screen appears again, then slide the slider to complete the process.

  • I just buy a imac 27inch when after intalling everthing for windows 7 and all the drivers i need and goes to the restard part my imac just goes to a black screen with a blinking cursel and it just wont proceed anyone can help me with this?

    i just buy a imac 27inch when after intalling everthing for windows 7 and all the drivers i need and goes to the restard part my imac just goes to a black screen with a blinking cursel and it just wont proceed anyone can help me with this?

    Support articles for things like this would be here:
    http://www.apple.com/support/bootcamp

  • Firefox is freezing (going to a black screen) whenever I rotate a web page from portrait to landscape view on a stock Motorola Atrix on a stable wifi connection. How do I fix this?

    I'm running a stock Atrix with Android 2.3 (gingerbread). Yesterday afternoon I noticed that Firefox was taking a good 30 seconds to open whenever I tapped the Firefox icon on my phone. It's also freezing/going to a black screen anytime I rotated from portrait to landscape by rotating my phone. When this happens, the phone itself doesn't freeze (other programs still work if I hit the home key), but it takes a couple manual on-off cycles of the screen to wake Firefox up. Is there something I can do to fix this annoying problem without installing and reinstalling Firefox?

    I have also found that unchecking the "Use hardware acceleration when available" option solves this issue. This option is in the Advanced section, under the General tab.

  • Cannot edit a photo in Iphoto goes to a black screen

    I can see my photos in the thumnail view but when I double click the image in EDIT mode it enlarges then goes to a black screen. It is not allow me to edit any more---after a few years of doing this. What can I do? I rebuilt it already. What next?

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help: As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • My iPad dosen't open, my screen is black even if I use the open/close buttun??what can I do

    My iPad won't open, my screen is black even if I use the open/close reset botton???

    Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset (not sure whether this is what you meant by a reset) ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Maybe you are looking for

  • How to do merging of data and sorting in reports

    I am writing the ref cursor query to get the output in my report. I have to get the data from different data sources. I have to merge the data from different sources and finally sort it before showing in the report. Is there a way to do that ?

  • RFC Error while client export

    Hi Guys, While Client export with any profile Background work process stop reason is RFC. system in single system landscape. I want export client profile through SCC8 only. please solve my problem Regards Ganesh

  • Failed to load applet in HTML page

    Hi, I cannot load my applet under IE9+, Chrome (v28). The applet is signed because it access to file resources. Applet deployment, Javascript code: <script type="text/javascript" src="http://www.java.com/js/deployJava.js"></script> <script> if (deplo

  • CS6 STUDENT AND TEACHER USE

    Hi, I come from Poland. It' s important notice, because I think, it has a great influence on the content of I'm talking about. Recently, I asked about using CS6 STUDENT AND TEACHER IN COMMERCIAL USE. I asked - "I know I can use my cs6 student and tea

  • Convertir un fichier numérique de format ingénieur en nombre flottant

    Bonjour, actuellement je suis en train de cogiter sur la conversion de format d'un fichier numérique car j'ai besoin de calculer des paramètres physiques à partir de ces données. En effet, les données numériques en format ingénieur contenus dans des