Our web server has been changed can't connect through outlook now

Dear Members,
i am really thankful for you i have learn a lot of things from this forum.......today i want to ask one question about outlook, we have a website and we use the company email addresses some period ago we received a lot of spam emails when we talk to our
hosting company they said we will transfer your website to a new server. as they transferred it to new server all the email address were deleted automatically. but we got the backup of emails and create all the email address with same id again,,,,........problem....is
this that now we can't connect through outlook for example if i try to setup outlook it goes up to "try unencypted connection" and here stops that can not establish a connection. if i go directly to mail server there all is fine. the hosting company
give us all the spec that incoming port should be 110 outgoing 587 and pop3. i tried all this but not working even i tried on such a computer where never outlook was installed .....but there it does not work as well..................Thanks;;;;;;;;
Tahir Mehmood

Hi Tahir,
According to your description, my understanding is that you can use OWA but Outlook using pop3 can't work. Right?
In general, the port for SMTP they are 465 (SSL) and 587(StartTLS) and 25 (unencrypted). 
The following list for your reference:
Default   Ports:
Server:
Authentication:
Port:
SMTP   Server (Outgoing Messages)
Non-Encrypted
AUTH
25 
Secure   (TLS)
StartTLS
587
Secure   (SSL)
SSL
465
POP3   Server (Incoming Messages)
Non-Encrypted
AUTH
110
Secure   (SSL)
SSL
995
As you said, your outgoing port is 587,  I  recommend you refer to the following screenshot to set your pop3 setting, and check if any helps:
Best regards,
Niko Cheng
TechNet Community Support

Similar Messages

  • HT1918 I am a US citizen now residing in Poland. My bank accounts are in the US and my billing address has been changed to my Polish address. Now I can't use these US credit/bank cards on itunes for purchase (for both US and Polish itunes accounts). ???

    Any ideas about how I can be allowed to make purchases in itunes again? TIA

    Expanding on what RG said, you need a credit card issued by a bank in the country in which you are and that has its billing address there. Since your credit card was issued by a US bank but has a Polish billing address, that card will not be usable in either the US or Polish iTunes Store. If you reside now in Poland, then as RG said you will need to get a card issued by a Polish bank with a Polish billing address. Or, if Apple offers prepaid iTunes cards in Poland (you cannot use cards issued in another country), you could use those.
    Regards.

  • Facebook is my home page on Mozilla; everytime I go to log in, my browser has been changed to proxy. I have to change this every time in order to get face book to load; how do I stop the browser from changing to proxy?

    My internet option state "do not use a proxy" but each time I go to long in on Firefox to Facebook, the proxy server has been changed to showing proxy and I can not get on to facebook until I go in and change it back to Do Not use Proxy. The problem is the setting does not stay but every time I go back to long on it's back to proxy server? How do I get it to not change???

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • Can you track a form if the file name has been changed after distribution?

    I created a form in Adobe Acrobat X Pro -- I then used the distribute feature and sent the form to myself using the internal server. After testing the form, and making sure all was good, I copied the attachment from the email I received when I distributed the form to myself, and sent it to my boss (via outlook). He then changed the file name, and sent the form out to our members. Our members are completing this newly-changed document instead of the original form. They are able to "Submit The Form", and it still looks as though its coming back to me via the dialogue box. However, I have no received any responses in my original document's tracking. When I tried submitting this new form myself to see what happened, I just received an message that says "Your response is being queued for submission", but it never tells you whether the form was actually submitted or not. Is there any way that you can track this form even though the file name has been changed? And if people are submitting their forms to me, where are they going?
    Please help!
    thanks,
    desiree

    I understand that you don't want to redo all the linking with the markers. You can try following (make a copy of your project first to be safe) :
    - close your project and quit DVDSP
    - move your old asset, and replace it with the new one
    - reopen your project
    A warning message should tell you that this asset has changed, but your marker will remain at old position. If the asset length are not the same, old length information will be used by DVDSP. To correct this, delete the asset from the timeline, and drop it back to the timeline.
    Now you just have to move the marker to the right position.

  • How can we find out data in an editable ALV grid has been changed or not?

    Hi Experts,
    How can we find out whether a data in an editable ALV grid has been changed or not.
    I am using the
    FM -> REUSE_ALV_GRID_DISPLAY_LVC
    for ALV display.
    I have to chekc whther data has been changed or not befor saving. if changed then only i want to
    SAVE
    . I cannot use the internal table comparison method for this purpose also i am not using OOP ALV.
    So kindly sugest me an alternative.
    Thanks and Regards,
    Shahana

    Hi,
    Thanks for your answer. I already saw this post.
    See this method.
    CALL METHOD reuse_alv_grid->check_changed_data
    IMPORTING
    e_valid = lv_check.
    This will update the internal table with the edited values. Then we can go for internal table comparison.
    But my scenario will not allow me for itab comparisons.I just want to know the ALV data has been changed or not.
    Regards,
    Shahana

  • Clicking on iTunes ikon and I get the message the item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly.  What can I do, I can't open Itunes.  I have over 4000 songs in iTunes that I had

    When I click on the iTunes ikon I get a box pop up which reads  Problem with shortcut.  The item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly.
    My computer which is a packard bell vista operating system, recently stopped working as the power supply overheated and blew up and it has recently been sent back to the Know How team at PC world and it seems to be since it came back I now cannot open iTunes.  I have also tried to search for iTunes in the search bar, I can see several files, but can't seem to open any of these either.  I think that quicktime isn't working, either.
    I have over 4000 songs in iTunes that I had recorded from my collectiong of CD's am  going to loose all these now?  Can anyone help, with very easy instructions as I really don't know what I am doing??
    Thanks

    I would copy over the entire thing if you have room.  With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account.  While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases".  If you have an iPhone, iPod and/or iPad...you can do the same thing from each device.  Nice new feature...just remember that those ripped CDs need a back-up!!!  Enjoy...

  • How can I update the thumbnails in the slide panel when a slide has been changed?

    When the text in a slide has been changed, how can you update the thumbnail in the slide panel to reflect this change?
    We translated slides, but the slides in the slide panel are still in English.
    Thanks for your help.

    the slides should update automatically as you type
    are you using a  theme you created yourself, or one you have added for this show?
    when you play the show, does the slides show correctly?  If they are OK you could still show the presentation.
    also what Mac are you using and what graphic crd is installed?

  • My phone has been changed under warranty by the apple store in germany. ı need a change document to register the phone in my country again. ımeı numbers of old and new must be in the document.you can send an mail in pdf format as soon as possible please.

    my phone has been changed under warranty by the apple store in germany.
    ı need a change document to register the phone in my country again.
    ımeı numbers of old and new must be in the document.you can send an mail in pdf format
    as soon as possible please.
    your's respectfully.
    new phone serial no:DQ******TC0
    old phone serial no:DN*******T9Y
    Product:
    iPhone 4S
    Serial Number:
    DN*******T9Y
    Service Requested:
    December 3, 2012
    Status:
    Repair Complete
    <Edited by Host>

    No we cannot send it to you because we are users just like you and Apple does not monitor these forums.
    But you can find the IMEI numbers yourself. Read the ENTIRE article:
    http://support.apple.com/kb/HT4061

  • My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

    My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

    Read and follow Apple Support Communities contributor Niel's User Tip: kmosx: I accidentally set a disk's permissions to No Access

  • Once a form has been submitted, can it be "unsubmitted" to allow the submitter to make changes?

    Once a form has been submitted, can it be "unsubmitted" to allow the submitter to make changes?

    Hi,
    Unfortunately, it is not possible to un-submit a response. However, user can submit a new response and incorrect/old response can be deleted by the moderator.
    Regards,
    Nakul

  • Hi can anyone help me im using my iphone to make a call to a number that has been changed two days ago but it automatically says 'called failed' why? please help!

    hi can anyone help me im using my iphone to make a call to a number that has been changed two days ago but it automatically says 'called failed' why? please help!

    Here's a nifty agorithm to fill an array of primes, using a forever loop with a labeled continue statement, from Horton's Beginining Java:public class MorePrimes
      public static void main(String[] args)
        long[] primes = new long[20];    // Array to store primes
        primes[0] = 2;                   // Seed the first prime
        primes[1] = 3;                   // and the second
        int count = 2;                   // Count of primes found - up to now,
                                         // which is also the array index
        long number = 5;                 // Next integer to be tested
        outer:
        for( ; count < primes.length; number += 2)
          // The maximum divisor we need to try is square root of number
          long limit = (long)Math.ceil(Math.sqrt((double)number));
          // Divide by all the primes we have up to limit
          for(int i = 1; i < count && primes[i] <= limit; i++)
            if(number%primes[i] == 0)             // Is it an exact divisor?
              continue outer;              // yes, try the next number
          primes[count++] = number;               // We got one!
        for(int i=0; i < primes.length; i++)
          System.out.println(primes); // Output all the primes

  • I keep receiving emails saying my apple id password has been changed when I havent changed it? Nobody else has access to my emails or can answer my security questions??

    I keep receiving emails saying my apple id password has been changed when I havent changed it? Nobody else has access to my emails or can answer my security questions??
    I have changed my email password aswell as having to keep changing my apple is password an it keeps changing?

    Sounds like you follow good practices.
    This has been going around for some time in various forms, a number of users have asked about it and the best advice is if in doubt go doirectly to Apple, not links in the email.  Calling Apple or using the Apple site is always the best approach.
    A few have even noticed very slight misspellings in the emails, things like Appel instead of Apple...most people don't even notice those.
    Anyway, safe computing and have a good day.

  • Server password has been changed!!!!

    Thanks ..I think I will delete the account and set it up again. Probably quicker than trying to figure it all out..with my limited brain power and energy levels..Thanks everyone ..I may well be back X

    valharry wrote:
    keep getting email message failed server password has been changed but it hasnt  any ideas why this is happeningI'm assuming as you have posted on here it's an O2 email account?Are you aware that unless you migrated your broadband to Sky that all O2 email addresses are closing down?

  • ORA-04062: Signature of package ... has been changed

    We've had a repeated situation where an unaltered package spec has been recompiled, which was in excess since only the package body has incurred a change. But, our Oracle Forms application throws the ORA-04062 error nonetheless when trying to access the package.
    I originally assumed that the spec had actually changed when this error came up, and didn't do any additional research. But this time around, I checked, and only the package body is different. The spec, though compiled, is identical to the version that was there prior.
    What makes up the "signature" and why does Forms keep thinking that a recompile equates to a signature change?
    --=Thanks
    Chuck

    chuckers wrote:
    We've had a repeated situation where an unaltered package spec has been recompiled, which was in excess since only the package body has incurred a change. But, our Oracle Forms application throws the ORA-04062 error nonetheless when trying to access the package.
    I originally assumed that the spec had actually changed when this error came up, and didn't do any additional research. But this time around, I checked, and only the package body is different. The spec, though compiled, is identical to the version that was there prior.
    What makes up the "signature" and why does Forms keep thinking that a recompile equates to a signature change?
    --=Thanks
    Chuck
    04062, 00000, "%s of %s has been changed"
    // *Cause:  Attempt to execute a stored procedure to serve
    //          an RPC stub which specifies a timestamp or signature that is
    //          different from the current timestamp/signature of the procedure.
    // *Action: Recompile the caller in order to pick up the new timestamp.default behavior is TIMESTAMP change which can be over rode to
    only force (re)compile what number or parameter type changes

  • RSA1 error  Logical system name has been changed for this system

    Hello All,
    Earlier the RSA1 was activated for client 300 on our crm 5.2. after that we changed the client to 500 using SE16 -> Type table RSADMINA / Check Colum BWMANDT -> 500.
    But now when we login to client 500 and execute RSA1 it is showing
    Logical system name has been changed for this system"
    In scc4 we have not made any changes. Can you tell what should be done ? in the pop up it is showing following steps
    Change the name of the logical system (table T000) for client back to SIDCLNT300. This enables you to continue working with the system.
    If you really want to change the logical name, than you can, if and when you:
    change the system name back to SIDCLNT300,
    delete all existing connections between this system and other systems,
    delete all transfer structures that still exist, and
    do not use ALE or Workflow.
    Guys do you know how to fix this ? .
    Also do you know Assignment of Source System to Source System ID (table RSSOURSYSTEM) using RSA1 ?
    Edited by: Sahad K on Mar 17, 2008 10:55 AM

    Hello Hari,
    Both the options you said  cannot be used
    since the logical system SIDCLNT300 is used by client 300 and it cannot be given to client 500.  Also there already exist a logical system SIDCLNT500 which is assigned to client 500.
    I found out the issue. In the table RSBASIDOC  the logical system name that can use rsa1( bw  client )is set as  SIDCLNT300).  Only if we delete that entry and set it to SIDCLNT500 ( 500) we can use it on client 500.
    The solution is specified in /message/3284842#3284842 [original link is broken]
    Let me try the solution 2 and inform you.
    Solution 2:
    You cannot delete the source system. Two cases have to be distinguished:
    The source system still exists.
    Switch to Transaction SM59. Find the destination which has the same name as the logical system of the source system from field SLOGSYS in table RSBASIDOC (see above).
    Such a destination does not exist in Transaction SM59. In this case, you have to create the destination to the source system. Name the destination equal the entry in SLOGSYS from above. Then return to the Administrator Workbench and repeat the deletion.
    The entry exists but a remote login is not possible. Correct the communication parameters.
    Everything works. Change to Transaction SE37, function module RSAR_LOGICAL_SYSTEM_DELETE, Sngl. test. Parameter I_LOGSYS = <log. name of the source system>, I_FORCE_DELETE = 'X'.
    The source system no longer exists or was replaced with another source system with the same IP address.
    Proceed as described in the first case but make sure, that the field 'Target host' contains a not existing server in the maintenance screen of the destination (Transaction SM59). If necessary, change an existing entry. Later when you delete, the system asks you whether you want to delete, although the source system is not available. Select 'Ignore'.
    Incase you have any idea other than this please let me know how to edit the RSBASIDOC table  and change the entry to client 500.
    Edited by: Sahad K on Mar 18, 2008 5:07 AM

Maybe you are looking for