Our webpage is getting version as 0 since updating to 31.0
I access one of my company's webpage regularly, which is developed using html and have some kind of dynamic editing tools(cms-edit-form) embedded so that any one can edit a section of page by using all basic features available typically in MS Office.
And they have a check to verify whether the browser is supported or not when we click on 'Edit' button in the page.
Problem is -
Since I upgraded firefox to 31.0, whenever I click on 'Edit' button it gives the following error -
"Unsupported Browser
The browser you are using does not support the required features necessary to edit the page.
Please use one of the following browsers to access this software:
Mozilla, version 1.3 or greater
Netscape, version 7.1 or greater
Microsoft Internet Explorer, version 5.5 or greater
Your current browser is: , version 0"
I do not have any technical information beyond this as I am not aware of the technology that was used to develop the page.
But am sure - I have been editing the page for last 4 years, and always use firefox. And they have not made any changes in the page or software used.
So I come to a conclusion it is definitely with latest update. Because of this I am using IE/Chrome now to access the website. So any suggestions on this ?
Can it be fixed by making any configuration changes in my firefox browser ?
Or at least if we know what has changed in the latest version of firefox, we can ask them to modify the page accordingly.
Any help is appreciated.
That '''Please use ....''' is at least 11 years old! It mentions Mozilla 1.3, which was released in March 2003.
Please contact your company IT department for answers. IMO, they at least need to update or fix the "browser sniffing" script for modern browsers
Similar Messages
-
I can't get on certain websites since updating my I Pad 2 to IO 6. Help!
I can't get on certain websites since updating my I Pad 2 to IO 6. Help!
An example of such a website would be helpful.
I've had no problems accessing any websites on my iPad. -
I can't get a full charge since updating to iOS 5.0.1
I bought a new iphone 4s and had zero problems running iOS 5.0. My battery was fine etc. Now the other day I updated to 5.0.1 and my battery *****, literally. I charge my iphone over night and it wont charge past 94% after being plugged in all night! Whats going on? Is there away to revert back to 5.0? Anyone?
It may or may not help... but have you tried a Restart and a Reset...
Restarting your device
1) Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
2) Press and hold the Sleep/Wake button until the Apple logo appears.
Follow these steps to reset your device
Note: Reset your device only if it is no longer responding and the steps above do not work.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
iPhone Reset
http://support.apple.com/kb/ht1430 -
Error Message "camera is unable to initialize" since update a week ago.
Camera won't work, I keep getting this error message since update android version 4.4.2. HELP!
redchef101,
I am so sorry to hear you are having issues with your device. Lets get to the bottom of this camera issue. What type of device do you have? Was the issue resolved by following the steps provided by tbo27? If you try another camera application do you receive the same error message?
LindseyT_VZW
Follow us on Twitter @VZWSupport -
I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open. I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported. How can I get my pictures?
If you want just the originals, then you can go into the Aperture library (right click on it and do "show package contents"). Inside is a directory called "Masters" and you can find the original files in a bunch of subfolders.
But... you'll lose all adjustments, keywords, and other information, and just have the files as they were imported originally from the cameras.
Easiest is probably to buy Aperture and update everything, and then migrate to the Photos application down the road if that's what you want. Aperture 3.0 came out in 2010 (five years ago!) so it's not like you've upgraded in a while -
Since updating because it says i need itunes 11 however it will not install because i need a newer version of mac os, any ideas how to get round this ?
Update your Mac OS level.
-
What can I do to update iphoto app I keep getting this message:
'You cannot update this software since you have not owned the major version of this software?.Going from iPhoto v 8.x.x to V 9.x.x is called an upgrade and requires the purchase of iPhoto 9.
To go from v 8.1 to v 8.1.2 is an update and is free.
OT -
To all experiencing burn issues since updating to last version of iTunes
To all that have been experiencing difficulties burning music since updating to iTunes6:
After reviewing this discussion board it seems obvious to me -I am not a technician but nonetheless- that the problems that we are experiencing are due to some kind of incompatibility between our PCs and Apple.
While some here have been very helpful in trying to resolve these issues, I find it disgusting that Apple does nothing. Itunes customer support do nothing. We are left to fend for ourselves, frustrated by the amount of money we have invested in building up our music collections in order fot them to be held hostage because Apple and/or iTunes will not address the issue.
Did anybody bother reading the software license upon updateing to the earliest version? Is it too early to talk of "class action" suits?
It seems logical to me that we will be heard better by Apple if we speak as a collective and not individuals. Maybe that way we could put more pressure on them to either fix what needs to be fixed or refund the money we have invested in iTunes.
As for me, iTunes has already lost me as a client. I won't download any more music because there is nothing I can do with it. That doesn't seem to matter to them. I suppose this is what happens when you get too big for your own britches!
Any ideas on how we can take down the bully????Lost data from iTunes on upgrade? See Empty/corrupt library after upgrade/crash.
Restored an older backup to the device? If you're lucky your most recent photos may be in your Photo Steam.
Otherwise you may need to paint a fuller picture of the problem...
tt2 -
Since updating to the latest version of Mavericks, I am getting copies of all the emails I send. Very annoying. How can I change this back?
By default Gmail automatically saves a copy of your sent messages. Gmail also is a non standard IMAP and for years we have had workarounds to make Gmail IMAP work in our email clients. Apple has included it's own fixes in Mavericks Mail. If you had previous workarounds this will now conflict with Mail.
I wrote about my experiences with setting up Gmail in Mavericks Mail here. I describe how you need to reset Gmail in your browser and in Mail.
Use Gmail with Mavericks Mail
http://www.needhelp4mac.com/2013/12/use-gmail-with-mavericks-mail/
You might these articles about how Mail works with Gmail in Mavericks helpful.
http://postbox-inc.com/?/blog/entry/using_gmail_in_mavericks/
http://blog.freron.com/category/gmail/
(Fair disclosure: Needhelp4Mac is my site. I may receive some form of compensation, financial or otherwise, from my recommendation or link.) -
Ever since updating to latest version of Firefox it has been painfully slow on my Mac running OS 10.5.8.
Websites just hang, and never get to where they are supposed to go. The status loop on tabs just spins and spins but never loads the site. Go to the same site on Safari and there in a second. It is like dial up slow. Have tried all the troubleshooting tips(reset, delete/re-create profiles, uninstall/reinstall, updated flash) nothing works.
Firefox had been working fine until latest update. What gives?'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "Continue in Safe Mode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
since update to 9.3, when I click thumbnails of photos i get an error message that original photo cannot be found. Didn't have this problem prior to upgrade to 9.3 and 9.3.1. Any thoughts?
This is the iPhoto for iOS forum. You should ask in the Mac iPhoto forum. iPhoto for is OS only on version 1.
-
Is it possible to get back 2.0 version coz I've updated it to 3.0...
Is it possible to get back 2.0 version coz I've updated it to 3.0 and I'm not happy with it. The new features are cool and all but the thing is, the battery drains quickly. And who would want that? I'll be satisfied having the older version back if that's the case.
Before updating my iPhone to it's latest version, the battery is not that easy to drain. But ever since I updated it to 3.0 version software, my iPhone does not even last for a day. WELL GETTING TO MY MAIN POINT, IS IT POSSIBLE TO GET THE OLD SOFTWARE VERSION WHICH IS 2.0? Please if you have any idea to answer my question, please do so. And tell me how and what to do. Thanks.
Message was edited by: Alyssabeybeh=))I've experience the EXACT same problem. Apple Support didn't believe the battery draining coincided with the 3.0 upgrade. I've tried evverything. Apple was awesome in that they replaced myt previous iPhone. Problem is, the exact same problem persists. I've turned off all wireless except GSM. I've removed all apps. I've reduced brightness to nearly nothing. Still, the battery drains within 4 hours. I'm on my way back to the Genius bar today.
-
Since updating to Firefox 23.0.1, I am unable to connect to our company servers.
Since updating to Firefox 23.0.1, I am unable to connect to our company servers. The error message is "Certificate type not approved for application.", and it gives me no option to create an exception.
In previous versions, Firefox gave the option of creating a security exception, and then everything worked as expected. The new version does not give this option, and hence I cannot connect to our company servers.
I can connect using Explorer, Opera, Chrome, etc., without any problems. Only Firefox refuses to connect.
Please advice.The issue is not with SSL or TLS. The issue is with Firefox.
Thanks for all the helpful suggestions, but this is clearly a bug in Firefox, where the ability to create a security exception has been disabled in this case.
Other browsers, as well earlier versions of Firefox, allow security exceptions to be created, which completely solves the issue.
How do I go about reporting this bug? -
Since updating to newest version, I can't open g-mail and have to use explorer. How can I fix this?
Since updating to new version of Firefox, I can't open my g-mail-this is sporadically. I have to go to internet explorer and have no problems at all. It is very frustrating and I want to either get it fixed or go back to the old version even though my college I attend does not support the browser.
Yes, I checked for updates and was given a message that my Firefox was updated and my Lion, too. I get no error messages with Firefox. It just won't work. If I click on a video link, nothing happens, yet if I switch to Safari, it works. I went to the Firefox website and follow directions for that--turned off proxy--yet, it still doesn't work.
As for MS Office/Word, I get a message saying it is activated, yet it never opens. When I try to open a document, it just keeps taking me back to the registration page where it says I don't need to register it. It has been maddening. -
Problems syncing iPad since updating to new version of iTunes
Ever since updating to the new version of iTunes yesterday afternoon, my iPad refuses to sync with my iMac. Instead, it simply gives me the message "The iPad cannot be synced. An unknown error occurred (-50)." I have tried completely restarting my iPad, my iMac, and my wireless network, and nothing works. I'm getting more than a little irritated. Anybody have any advice on how to rectify this issue, short of praying that Apple issues a fix in six months?
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503http://support.apple.com/kb/ts1503
Cheers, Tom
Maybe you are looking for
-
I would like to create a multipurpose graph display - how?
Hi all, I would like to create a simple VI, it has multiple sets of information and signal inputs (Signal generators or DAQmx cards), and whilst all the information is important, i don't need to see them all at the same time. instead I would like to
-
I have just purchased Photoshop CS6 extended and though Adobe Bridge is installed, I cannot get it to open within or outside of CS6. I have 64 bit Windows 7 and I can see that the Bridge software is installed and CS6 is working fine. It keeps on sayi
-
HT204088 WRONG PURCHASE HOW CAN I GET MONEY BACK
my son download a game that is suposs to be free but i got charge how can i get my money back
-
MDX Testeditor - How to bring in the Catalog and Cube values??
Hello Experts, Is there a way to create new 'Catalog' and new 'Cube' where in I can add the Multiprovider name in the Catalog section and 5 queries in the multiprovider under Cube section. I have a problem bringing in the new queries un
-
How do I update IOS on this Ipod gen 2
How do I get IOS to update to a newer verson