Out of Box question

I got my new 80G yesterday. I've had two 30Gs in the past, so I'm not an iPod newbie, but I just want to make sure I'm not missing something.
As far as I know, from the box, you just plug it into your computer via USB and it should start charging and setting up, right?
I've tried several different USB ports, I've tried two different USB cables, and I've tried a wall charger, and I get nothing from the iPod. It's not the computer specs - they are more than adequate.
Is there something I'm missing? I would hate to pack it up and ship it back for exchange if I'm not seeing something right in front of my face. Unfortunately, I don't have an apple store locally to take it by.
Windows XP
Windows XP

You may need to reset it, which Brian mentioned, but a proper reset requires use of the hold switch as well...
Put the hold switch to the OFF/White position. Now toggle it ON/orange then back off again. Then press and hold both the MENU and center buttons on the iPod and hold them for a good 10 seconds or so. Your iPod should reboot starting with the Apple Logo screen.
If it doesn't work the first time, give it a second or third go. Sometimes it takes a few tries.
Patrick

Similar Messages

CC&B-MDM OUBI 2.4 Out of box batch jobs related question?

friends,
I have a Question on CC&B 2.3 Out Of Box BI batch jobs: SP/Meter Extract batch jobs are in MDM OTB but we are not sending a specific SP Type to MDM as it is and Item based SP. How do I extract that info from CC&B without a lot of Custom.
Alekh

Any luck with this?

How to change font size in a call-out tool box?

Hi, the other day i inserted a call-out tool box in a PDF document, however i cannot find anything that can change the font size of the letters i input in that box. could anyone help? Thanks.
Sherman

This is a question for the Acrobat support forums – please post there.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 23 Nov 2011 10:55:07 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: how to change font size in a call-out tool box?
Re: how to change font size in a call-out tool box?
created by danmarch<http://forums.adobe.com/people/danmarch> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/4043425#4043425

Price Difference: Out of box w/ Missing Accessories vs Out of box w/o Missing Accessories?

Hello
Ok, so I need some help.
Last night, I purchased a Samsung 55" TV out of box. When I went home to install my brand new (used) TV. It was missing the power cord! After further examination, it was also missing the IR Extender Cable and the batteries.
On the label, it said it was "no missing accessories" but unfortunately, it was missing some key accessories to run the tv. I talked to the store and they were unable to provide me with the missing accessories and that I had to buy them individually and despite being labeled as "no missing accessories," that's the true cost of the TV.
My question, is that price correct, would there be a price difference if a out of box tv had all the accessories vs not having all the accessories?
I just want to make sure I paid the true value of the TV. As I see it, the TV may have been priced based on all the accessories but since the TV is missing accessories, the price of the TV may be different.
Your thoughts?

Hello ItsJTP,
Open box items are a great way to save on some of your favorite devices! It is sad to hear that this experience may not have met your expectations or been what we hope for our customers purchasing such items. I am sorry for any concern this may have caused you.
Open box items should be marked appropriately for any missing pieces or accessories, and then priced accordingly. With that said, unfortunately I am unable to know whether this was priced correctly, and missing accessories listed incorrectly, or if the missing accessories were listed incorrectly and thus the price was not appropriate.
With the information registered with the forum, I was unable to locate your purchase to review it. I am sending you a private message to gather further information in regards to this inquiry. You may check your private messages by signing into the forum and clicking the envelope icon in the top right corner of the page.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Need solution for sub site when we click on the list item of a list? by using out of out of box feature in share point 2010

Hi all ,I have Task that When click on list item a new sit will open fo
for ex: I created a List (test list) and list items are Project name,Application, Start date ....,when i click on Project name a new sub site will open,
Is there any out of box feature ?
for that Please help any body knows
Thanking You,

This is a forum related to System Center Service Manager. Your question seems to be related to Sharepoint 2010. Maybe it's better to ask in the Sharepoint 2010 forum, for instance: General
Discussions and Questions
Andreas Baumgarten | H&D International Group

Invalid Key after 'out-of-box' recovery. (Satellite A215)

I did a out-of-box recovery with the recovery disc's. It goes through the full process but when you click on 'admin' to start the computer, it asks for a product key. I've entered the on off the computer, but say's invalid. Any ideas why this is happening. I've redone the recovery three times with all the same outcome.

Satellite A215-S7428 (PSAFGU-02E002)
In the Device Manager, these items are listed with a yellow question mark. Base System Devices (x3) Ethernet Controller PCI Device RTL8187B_WLAN_Adapter SM Bus Controller Video Controller (VGA Compatible)
No surprise there. You need to install the correct drivers and utilities for Windows XP.
The site for that model does not have them all (the chipset and display software, in particular). Best to get those for the European models in the same part number family (PSAFGx).
Go to the European download site and select Satellite A210 with Short Model No. PSAFGE. I don't see anything there you wouldn't want to install.
But the order of installation matters. It's important to install the AMD Processor driver and the ATI display driver prior to any other driver. Install the Common Module before any other Toshiba utilities.
-Jerry

Customizing out-of-box query application

Hello!
We are using the out-of-box query application on SES 10.1.8.4.0. We have created an XSLT stylesheet for rendereing search results and configured it in SES.
We have two questions:
1. Our customer would like the SES score to be shown for each hit in the search result.
It seems that the SES score (relevancy) is not provided as part of the result XML that the configured XSLT stylesheet works on.
We know that it is available when using the Java API and when viewing source in the browser it seems to be available as an attribute on <div> tags for each hit.
Is there a way to make it accessible to the XSLT stylesheet?
2. Is there any way to configure the number of search hits to be shown on each page in the search result?
Regards,
Brian Nielsen

I think the answer is "no" to both of these questions. I will attempt to confirm.

Solution manager can be used as repository DB with out-of-box integration?

Solution manager can be used as repository DB with out-of-box integration?
Hi ,
In Our Global SAP Environment, We are looking to use solution manager as a CMDB ( Config management DB) , which is kind of repository DB where it needs to keep track of infrastructure components .
A CMDB about Host consists of elements like
No. of CPUs,
RAM size,
...etc
For example in solman SMSY , you get some information about the SAP Host .
we have multiple CMDB systems , each one for our supplier .
For example Host hardware () CMDB is managed by Vendor1,
Storage CMDB by vendor 2 , and we need to join the both information , in order to get the Full elements of the Host .
A host information spread across the Multiple Vendor CMDBs.
Now we want to use solman as single CMDB, where Solman keeps track of some data , and needs to get some additional data from vendor1 by connecting into
their DB using the username/password ..etc
Does the solman has this Out-of-box functionality?
Thanks
Vasu .

Hi - smilar question
If we setup the system monitoring using solution manager , can we able see the TCodes & their screens from solman .
For example Can I able to control my ECC screens (SCC4, RZ10,SMLG,SALE,SPAD,SM59,.... ) from Solution manager ?
waiting for the reply .
Thanks
Vasu

Monitoring of messages (Out of Box)

Hi Experts,
I have been developing critical interfaces with Legacy systems(MES) with PI7.11. I have question from my team like can we monitor centrally the messages out of box (PI), centrally the messages status in both outbound/inbound scenarios (Asynchronous) with MES using any API functionality. I have refer the BAM functionality, I am not sure how extend it will be fulfill our requirement.
I have searched in SDN and Google, but I am not getting the exact. Please help with your ideas.
Thanks in Advance.
Cheers
Neelagiri's

Hi Florian,
Do you mean Messages sent by HTTP sender?
YOu can monitor messages in SXMB_MONI transaction in the abap stack of the XI system.
Not sure, if you meant anythig else.
Regards,
Ravi

Is "out of box" Planning flawed?

Hi,
I just joined a company that is rolling out Planning v11.1 and noticed the same flaw in design that I found in Planning v9.3.1 over a year ago.
In fact, Pillar was designed right - Take Forecasting of Payroll Taxes for example- Pillar calculates Payroll Tax, but give planners a "Override Payroll Tax" in case the calculation does not work (e.g. for foreign entites).
However, Hyperion Planning does not have "manual Override" build into its "out of box" design. I had to introduce "Manual Override" members to almost all accounts (e.g. Salary, Depreciation, Op Ex accounts). Is it just me or are all other implementations of Hyp Planning customized heavily to all manual overrides to any account that is calculated by Business Rules or seeded?
Thanks in advance

Thanks Jake. Well, I think Pillar had given users a system closer to what most users want.
One more question:
I describe below a couple of ways to implement "override". Which do you prefer or use more often?
Using the example of "Payroll Taxes"
1) in Measures, add two members:
Misc_members
|____ Calculated Payroll Taxes (~)
|____ Manual Override Payroll Taxes (~)
Write a script that loads Calculated Payroll Taxes into Measure "Payroll Taxes", then override that if there there is a value in "Manual Override Payroll Taxes".
2) Add Children to Scenario:
Budget
|_____ Calculated Budget (~)
|_____ Manual Override Budget (~)
This method works for all measures including "Payroll Taxes".
Write a script that loads Calculated Budget into Budget then override that if there there is a value in "Manual Override Budget".
Edited by: user8806264 on Nov 19, 2009 9:36 AM
Edited by: user8806264 on Nov 19, 2009 9:37 AM

What out-of-box actions initiated by HR go through MSS approval?

Hello,
I'm new to HR, and have been asked to find out what out-of-box actions are there that can be initiated by HR (not employees, but HR employees), that will go through a MSS approval process?
For example: Retention Payments are initiated by Comp Analyst; then approved by employee’s Manager, HR Manager, Compensation Manager; then sent to Payroll.
Are there other processes/actions like this that exist? E.g. initiating a spot bonus.
I appreciate that we can build anything we want. What we would like to know is what's seeded?
I also appreciate that this question is a little open ended, but if anyone can point me the right direction that would be a start. There is mountains of documentation that I have to plow through.
Regards
Dave

Hi,
Seems to me the quickest way for you to get this information is to review the AME transactions for SSHR or whichever module you are looking for.
Regards,
Vinayaka

MacBook Pro - New out of Box won't power up - Please help me

I have reformatted this question several times.
Buy 15" rMBP from Apple Store. Take home. Sits sealed in box on shelf in closet. Open sealed box. Won't power up.
Take back. Genius bar has no idea. No signs of damage - water/fall/fire etc. Cord works. They send to Apple to fix since I have Apple Care (3 year)
Apple Cares says Water Damage. This is impossible. Had out of box 5 minutes. Genuis bar vetted that as possibility.
Apple sends pics from Depot of water logged rMBP. Go back to Apple Store. Genius Bar confirms that it wasn't like that, notes system.
Tech support says pay $1200 to fix, or they are sending back.
What can I do?

Apple Customer Relations 1-800-767-2775
That's a higher level of supprt for dispute resolution.

Re: Out-of-box recovery

Hi,
I uninstalled Realtek Ethernet controller driver and then accidentally installed the Realtek all-in-one Windows driver but it wouldn't do the same thing as the other one.
I then tried to uninstall it but it wouldn't let me so I tried to do the out-of-box recovery. It says to hold 0 (zero) down and press the power button so that's what I did and it just froze on the page with the red 'TOSHIBA' on even though the manual said it should come up with a warning page.
I am not an expert at computers and am very stuck on what to do because I have to use the Ethernet cable whenever I want to connect to the internet.
If someone can help then I would be very grateful. :)

Hello
If you check Users Manuals document on page 80 you will notice that there is no word about pressing zero at start up.
HDD recovery installation works as described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm or using recovery USB stick if you have created one.
For more questions you are welcome.

Creating automated email reminders to users every 2 weeks via Workflow 2010 Out of Box approach only

Hi,
I have been asked to automate the email reminders to users (every two weeks) from the SharePoint2010 solution.
I am trying to achieve this via workflow ,but am unable to get the results.
Req :
Twice a month the users should get an automated email reminder for a specific task.
1. On 14th (or last working day in mid month -1) of the month. ( a field "mid month end" captures the date as 15th of the month)
2. On last working day - 1 of the month. ( a field "month end" captures the date as last day of the month)
Please let me know how i can achieve this via Out of box functionality. I donot have exp with workflows so a detailed steps guidlines will be very helpfull.
Regards,
Guru

Although you can start a workflow and then pause it for a number of days, I'd feel uncomfortable with that. If the farm crashes, who guarantees that the paused workflows will pick up where they were left off?
SharePoint does no offer to run a workflow on all items in a list/library -- which I feel is a big draw back.
The good news is that there is a free 3rd party tool that can run a workflow on all (or specific) items in a list or library. It's called the
HarePoint Workflow Scheduler and I love it.
You can create a view that shows the items that you want to run the workflow on.
Or, if you know how to write CAML, you can feed the CAML Query right into the HarePoint Workflow Scheduler task.
At my company we have several sites in production that use the HarePoint Workflow Scheduler with a view.
So, first, create a SharePoint Designer workflow and define it to run manually.
Then use the HarePoint workflow scheduler to define a schedule.
You can define a schedule for the HarePoint tool, like every day, month, week, etc., by just clicking a few boxes.
Since this functionality does not come out of the box with SharePoint 2010, this free tool is a real gem.
cheers, teylyn

Just took my iPod classic 160GB out of box turned it on and accidently hit clickwheel or button and eveything is in language other than english. How do I get it back to english without being able to read symbols.

just took my iPod classic 160GB out of box, turned it on and accidentially hit a button changing the language from english to something else (chinese or japanese). All I see now is symbols. How do I turn it back to english without knowing what any of these symbols mean. I started clicking buttons and click wheel and can't seem to get to any section with various language options. Please some help me get it back to english.

There are two options. The first is to learn whatever language you have it set to, the second is to find someone else with an iPod Classic and read the English menu and follow it in your iPod. I also believe you may be able to set language perfunces from within iTunes while the iPod is docked, providing they are in English.

Out of Box question

Similar Messages

Maybe you are looking for