Out of date InDesign files

How do I get rid of unwanted InDesign files? I have several similarly named files created as I learned how to use InDesign. I only want to keep the correct one. But I can't seem to get rid of the others. I'm on a trial of Creative Cloud. Thanks for any help!

kpm123, When you open InDesign, open the file that is the Final and The file that you want, Then Choose "Save As.." from "File" and save it to a Different location and rename it to something as "Final_presentation.indd" and move the rest to trash (If windows, Delete them)
and you are Done!
- Nitin

Similar Messages

Could use of an unlicensed font empty out an Adobe InDesign file?

Has anyone ever encountered a situation where the use of an unlicensed font caused an Adobe InDesign CS3-created file to suddenly go empty after a couple of months? Whey I say "empty", I mean that the entire data fork is blank, only leaving the resource fork around. Thanks in advance.

No, it's not the backup system. This particular network was set up to use the portable home directory syncing system to sync all data to a server and only the server gets backed up. *BUT* the sync system was set to "manual" because automatic syncs were slowing the machine down. And the user had not been manually syncing for a couple of weeks. Also, a CD she burned within two hours of creating some of the Adobe files *ALSO* exhibited the same problem (empty data fork, leaving a small resource fork).
As far as I know MacOS doesn't natively allow files to be manipulated like that. Hence the mystery that I'm trying to solve.

How to get rid of blank white page next to cover page when converting an indesign file into a pdf flip book

Hey Everyone,
I created an catalog using indesign and now I want to convert that into a pdf flip book. I have exported it as a SWF then changing the SWF back into a pdf. It works great however, I keep getting a blank white page next too my cover page, and I really don't want this. I find it very distracting and visually unappealing. Is there any way to get rid of this blank white page? Or any other suggestions on how to create a flip book out of an indesign file.

It sounds as if you're not checking the pagination properties of the chapter after the problem within the book file.
The book file settings always trump the component file's settings.
So this would mean that, if Chapter 3 is set in the book file to start on a Right page, the book enforces this by adding a blank page to Chapter 2.
You should be able to fix this by selecting all the component chapters in the book, right-clicking and setting all the pagination properties to start on Next Available page, but I don't have 7 on this system so I can't give you the exact key strokes.
Art

Probelm with InDesign files...

Hi everyone,
We are working in extraction process for InDesign CS3. And we have the script to extract all stories from InDesign file. We got this script from adobe forums. And we added some lines into the script as per the needs. Still we are not found any issues in this script and its working greatly.
But now we have one set of InDesign files for text extraction. In these files when we try to extract texts the script throws an error like "Failed to Import". Refer attached snapshot. We have tried but unable to solve the problem.
Herewith i attached the files for your reference. Please find out the script & InDesign file in the attached zip file.
Can anyone look into this and help me out.
Thanks in advance
Thiyagu

Hey again!
I figured it out. Just made a complete new document and tried again.
This time everything works as it's supposed to.
I assume the problem has something to do with the fact that I overtook the job I am currently working on from a colleague and thus there was some form for corruption or similar.
At least when starting from a fresh it's all working fine again.
But you just gave me the idea to check this possibility so I rated your answer as helpful.
However I have no clue what to do with the old document in order to change that. I guess it's one of those InDesign mysteries that so often occur but I also assume that copying and pasting will be sort of a solution..., well here and now at least.
So unless you know what could be the reason for the corruption I'll thank you very much for your time and kind help.

Multiple indesign files for product brochure one data merge file

I have multiple indesign files for product brochure and there are price changes for various products.
attached is a screen shot of the folder where all the indesign files are located as you can see each one has been laid out as a spread.
Rather than opening each individual indesign file to amend prices can i quickly? or is there a way of compliling all documents into one file and quickly updating the price with the data merge file.
thanks in advance.

Absolutely not.
(1)     PDF/VT-1 files must also be PDF/X-4 files. The “create PDF via distillation of PostScript” method precludes this since PostScript supports neither live transparency nor color management.
(2)     The efficiencies of PDF/VT-1 require use of Forms XOjects and Image XObjects in the PDF file. That requires direct PDF creation that you get from PDF export. This is not available via any route that uses stink'in PostScript as an intermediary.
(3)     Adobe most strongly endorses PDF creation from InDesign via the export function, not printing to PostScript and distilling. Such PostScript is optimized strictly for printing and not for PDF file creation.
          - Dov

My whole document comes out as low res when I export to PDF, even the indesign file also now low res. Tried changing display performance, but that's not helping.

My whole document comes out as low res when I export to PDF, even the indesign file also now low res. Tried changing display performance, but that's not helping.

Are your links up to date? What settings did you use?

Extracting an image data merge field using only an indesign file and not document.dataMergeProperties.dataMergeFields

Hi,
I have kind of a weird requirement but I hope you guys can help out.
I need to extract all the custom fields used in an indesign file without referencing the dataMergeProperties of a document. Sorry if this is a weird request it is just what I've been told (our system needs to not crash when people upload a variety of in design documents to generate high resolution jpg preview documents).
I can already get all the text custom fields by looking for "<<" and ">>" in the text frames of a document but I'm having a really hard time finding the image custom fields.
I tried looking at the rectangles for a given page but that didn't seem to help (but maybe i'm missing some there). I also tried looking at the graphics and images collection of a document but this seemed to return only graphics that are hard coded on the in design document and not the custom image fields.
Any help would be appreciated!

Uggg....
Found the answer after I realized I was looking at the wrong SDK (5.0 instead of 6.0)
I'm using the doc.hyperlinkPageItemSources property to get these images. It also looks like you can get the image data merge fields from DataMergeImagePlaceholder (but rememeber I couldn't access this).

How to create multiple editable PDFs from data merged Indesign file

Hi
This is quite complicated but I'm hoping someone can help me and hoping I can explain it too!
I am working on a project for a client. She wants to send 150 people a 6 page PDF with fields to complete and return to her.
She has an Excel spreadsheet with some of the fields completed already so these will be Data Merged into InDesign CS6.
The short version of the question goes like this:
Can you automate the process so that once all the data is in the InDesign file, it can then create a PDF every 6 pages all in one go?
For those still interested, the long version of the question goes like this:
I have created 3 pages in InDesign with fields to complete and used the 'Data Merge' facility to add the Excel info.
I have created 3 more pages with blank fields to fill in.
Then I have made all fields editable using the 'Buttons and Forms' facility in the Interactive menu.
Then I have created an interactive PDF. Then I have opened that PDF in Adobe Acrobat X Pro and saved it as 'Reader Extended PDF' and 'Enable Additional Features'
I now have an Editable PDF with half the fields filled in and half blank to be filled in and this can be saved and returned.
Now, this would be great if it was only one or two. But I need to create 150 different versions and this is just for the Pilot study. If all goes well, this will go to 5,000 people and I can't be creating 5,000 seperate PDFS!!
At this stage, I am just focussing on the 150. So again, going back to the original question, is there a script that could be written either to break up the 1st PDF every 6 pages into 150 different PDFS? Is there even a way of extending that script to Save as Reader Extended etc? Is there a simple idea that I'm missing? Are there any ways to do this? I can use 'Created Merged Documents' to make 150 x 6 pages in Indesign so can anything be done from there?
Any advice greatly appreciated
Thanks
G

Hi Akash,
1) Pass the three header data in header table. 2) Pass all the item data in item table. here explain where you struck.
Regards,
Madhu.

How do I have to define a regular expression to filter out data from file?

Hi all,
I need to extract parts of lines of a ASCII file and didn't get it done with my low knowledge of regular expressions
The file contains hundreds of lines and I am just interested in a few lines, within that lines I just need a part of the data.
One original line looks like that:
TP3| |TP_SMD|Nicht in Stueckliste|~TP TP_SMD TESTPUNKT|-|0|87.770|157.950|0|top|c| |other|TP_SMD|TP_SMD_60RF-TP
Only the bold and underlined information is of interest, I don't need the rest.
I can open that file, read in each line but then I am struggling to pick out only the lines of interest (starting with TP), taking that TP with its number and the coordinates following later on and then writing these shortened lines to a new text file. So the new line should look like that:
TP3; 87.770;157.950;0 (It doesn't matter if the separator will be ; or |)
I thought of using regular expressions - is that the right way or is there a better approach?
Thanks & regards,
gedi, using LabVIEW 8.5
Regards,
gedi

Hi max,
for finding a specific part of a string you can use the "Match Pattern" VI, it is located in the Strings Palette.
Maybe the Extract Numbers.vi example in the examples browser library can help you.
What I did to filter out my data of interest is first to sort out only the columns which I want to have -
then there are still a lot of lines remaining I don't need (this is the thing described above).
The rest I am going to filter out with a (then easy) regular expression with the "Match Pattern" VI.
Regards,
gedi
Regards,
gedi

PSE file is out of date

Hello!
I am facing with the problem that a PSE file (tcode STRUST) on my SAP NetWeaver system is out of date.
I deleted this PSE file.
Now when I log in onto SAP system the warning/error comes up.
Question:
What are the technical steps to solve this problem?
(create a new PSE file?)
Thank you very much!
regards
Holger

[Creating a Client PSE |http://help.sap.com/saphelp_nwce10/helpdata/en/46/dee8c819c840e0e10000000a1553f7/content.htm]
[Creating the PSEs and Certificate Requests|http://help.sap.com/saphelp_nw04s/helpdata/en/a6/f19a3dc0d82453e10000000a114084/content.htm]
check T code: OAHT (might help)

I loaded my ipad photos from camera and all the pictures sorted by date. Next, I did a sync with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files?

I loaded my ipad photos from camera and all the pictures sorted by date. I later sync my ipad with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files other than reloading all of them from camera?

What version of iPhoto?
Select one and rotate it. Then rotate it back. Does that make it appear?
A much better work flow is the keep the photos after importing. Check the success the import, wait for at least one successful backup cycle then use you camera's format command to reformat the card
LN

How to print out the data from the file ?

hi all,
i have upload my file to here :
[http://www.freefilehosting.net/ft-v052010-05-09 ]
anyone can help me to print out the data from the file ?
the content of the file should be like this :
185.56.83.89 156.110.16.1 17 53037 53 72 1
and for the seven column is
srcIP dstIP prot srcPort dstPort octets packets

hi all,
i have try to do this
public static void Readbinary() throws Exception
          String file = "D:\\05-09.190501+0800";
          DataInputStream dis = new DataInputStream(new FileInputStream(file));
          //but then how to read the content ??????can you give me more hint ?????
i have find the netflow v5 structure by C
struct NFHeaderV5{
uint16_t version; // flow-export version number
uint16_t count; // number of flow entries
uint32_t sysUptime;
uint32_t unix_secs;
uint32_t unix_nsecs;
uint32_t flow_sequence; // sequence number
uint8_t engine_type; // no VIP = 0, VIP2 = 1
uint8_t engine_id; // VIP2 slot number
uint16_t reserved; // reserved1,2
struct NFV5{
ipv4addr_t srcaddr; // source IP address
ipv4addr_t dstaddr; // destination IP address
ipv4addr_t nexthop; // next hop router's IP address
uint16_t input; // input interface index
uint16_t output; // output interface index
uint32_t pkts; // packets sent in duration
uint32_t bytes; // octets sent in duration
uint32_t first; // SysUptime at start of flow
uint32_t last; // and of last packet of flow
uint16_t srcport; // TCP/UDP source port number or equivalent
uint16_t dstport; // TCP/UDP destination port number or equivalent
uint8_t pad;
uint8_t tcp_flags; // bitwise OR of all TCP flags in flow; 0x10
// for non-TCP flows
uint8_t prot; // IP protocol, e.g., 6=TCP, 17=UDP, ...
uint8_t tos; // IP Type-of-Service
uint16_t src_as; // originating AS of source address
uint16_t dst_as; // originating AS of destination address
uint8_t src_mask; // source address prefix mask bits
uint8_t dst_mask; // destination address prefix mask bits
uint16_t reserved;
but how to translate the structure to java,then get the data from the file ?
Edited by: 903893 on Dec 21, 2011 10:52 PM

Receiving an error when trying to commit files using subversion in Dreamweaver: file or directory is out of date

I'm trying to use subversion in dreamweaver. I've followed the setup steps and tested the connection to the svn repository. All good. I've even updated some files before successfully. Now, I'm trying to commit changes made in my local working copy of several files to SVN. I'm receiving Error#160024: Commit Failed. File or directory <subject file name> is out of date; try updating resource out of date" I've tried right click->version control->update. Then commit again. Same error. Any help?

Hi rmcproperties,
Found a discussion thread that could help you http://stackoverflow.com/questions/87950/how-do-you-overcome-the-svn-out-of-date-error
Thanks,
Preran

Remote debugging information file out of date

I am unable to remotely debug a project. I get "The debugging information file for this file is out of date".
This is very strange because the project resides on the remote computer and I am working on it as a network share. I had it working yesterday, but not today.
I assume that I have the 2 system configured properly since I am getting this error on my development system when I launch the program on the remote system. I am connecting remotely with TeamViewer 10.
CVi 2012 SP1.

Mjl,
Have you made changes to what you are trying to debug since yesterday? I would make sure that the application versions match for both computers you are using.
Also, are you following this link to debug your project?
http://www.ni.com/tutorial/3384/en/
Matt J
Professional Googler and Kudo Addict
National Instruments

QuickTime Files Out of Date

Any time I start itunes,use the Apple site or try to use QuickTime, I get a pop up stating "Some of your Quick Time software is out of date. You can fix this by updating to the latest version (then choices of: 'Cancel', 'Do it now')". If I select 'Do it now', I get a second pop up which says "Information received from the Quick Time Server is Invalid. Please try again later."
Itunes seems to work if I select "Cancel". The Apple site keeps giving me the same popups.
I have uninstalled, and reinstalled Itunes/Quicktime with no impact. I've uninstalled the Apple Updater. I've tried the "DO it now" both behind a firewall and on an 'open' home DSL line with the same next pop up.
Thanks for your help.

Not of any help, but misery loves company. I am having the same problem with Windows XP that had some older versions of quicktime on it. I have attempted to all traces of the old software, but whenever I download and attempt to use the current Quicktime download I get an error code like yours where I am instructed that "Some of your quicktime software is out of date.You can fix this problem by updating to the latest version" The box in which the error message appears seems to be of the style seen with older windows programs like Win 98. Anyway, as long as the new Quicktime is installed but not working properly then I can not access the apple store. Also everytime the error code appears windows pops up with its own message stating that Quicktime has encountered a problem and needs to close.
I too found no boxes checked when I looked under compatability as suggested by one poster. I tool have found no viruses.
I have not tried the safe mode installation suggested by one poster.
Do you have any older games installed that used older versions of Quicktime?

Out of date InDesign files

Similar Messages

Maybe you are looking for