Out of date map
Hi,
I am getting an error out of date map because of an undefined element<fieldx> in my import map.
But this<fieldx> is not holding any value.
What should i do?
Thanks
Simran
Hi Simran,
Apart from the SAP note mentioned by Ankur, please follow the below link:
[Re: Import manager save Vs Save & Update]
This error ususally comes when your importing process is automatic. This problem usually occurs with XML files because the XML source that gives the structural error when importing, contains an element which had not been part of the original XML that was used for generation of the original map. Since this element is not defined as mandatory in the XSD the Import Manager could open it with no schema conflict. But since the source file contains a new element the Save Update option must be applied to add this new element to the map definition.
I hope I am able to help you.
Thanks & Regards
Dilmit Chadha
Similar Messages
-
6210 Navigator out of date maps for South Africa
I have downloaded the newest maps for my 6210 navigator but it's out of date. There's streets that has changed names more than a year ago that still reflects as the old names. Also… If I search for street names or addresses it shows addresses for Europe not SA. Is there any way of getting the newest maps and search capabilities for SA? I contacted Nashua SA and they gave me a link for amAzeGps (no explanation or message – just a link – very unprofessional guys). This app is a misery to use and has hidden costs. I want my standard GPS maps to work the way it should for SA.
@4F
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
YouTube, Facebook, Google Maps doesn't work - says Flash Player is out of date
Hello.
I have MacBook Pro since summer last year. In recent days, strange problem occured. When I want to open either YouTube, Facebook or Google Maps a window pops up saying "WARNING! Your Flash Player may be out of date. Please update to continue." (fig. 1) After clicking on OK, Safari shows page, that looks like Adobe Update page (fig. 2). After clicking anywhere, a setup.exe file is downloaded and thats all. After this, nothing else happens. I still cant view these pages and it is pretty annoying. I tried installing, uninstalling and reinstalling Flash Player but it didn't helped. I also searched the web but couldn't find solution. Any help will be highly appreciated.
Fig 1.
Fig 2The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they're almost certainly the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked, but you should assume that the router is at fault until proven otherwise.
The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Any password that you can remember is weak.
3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
Check the router manufacturer's website for a firmware update.
If you downloaded and installed what you thought was a software update, ask for instructions. -
Out of date Brazil map on Nokia 3710
Hello,
I live in Brasil and I bought a Nokia 3710, which has an internal GPS receiver and came with Nokia Maps 2 pre-installed. I have already checked for both software and maps update on Ovi Suite. There was no software update, but Ovi Suite did update Brazil map.
Nevertheless, even though Ovi Suite has updated the map, it is still pretty out of date! I have also a Nokia 5800 with Ovi Maps 3.04 installed and it has a more recent version of the map of Brazil. The Brazil map in my 5800 is bigger and have recent streets modifications on my town, which the map installed on the 3710 doesn't have.
Does anyone know of an explanation to this? Shouldn't the map data be the same, despite of different software version? I feel a little deceived here, because I bought Nokia 3710 in order to use as a GPS device, and of course I expected to have the more recent version of the maps.
I can't think of an explanation to this, since Nokia currently owns Navteq, which is the map
Best regards,As each new map series comes out with more detail or layers included it is increasingly needing more powerful devices to implement them. If you look at the restricted devices that can currently utilise OVI Maps v3.06 Beta from Nokia Beta Labs you will get a better idea.
Presumably your 5800 is using OVI Maps v3.04 with 00.01.25.114 maps for Brazil, although if you updated to aforementioned Beta version of OVI Maps using maps 00.02.41.123 you would find in some specific regions mapping is currently worse than previous version.
Happy to have helped forum with a Support Ratio = 42.5 -
This is not a PC/PWX problem, but a mainframe security problem. TIDSS01.POS.IBD.DR0100.DAT is not a GDG file name.It might be the base for a GDG. A GDG file name would look something like eitherTIDSS01.POS.IBD.DR0100.DAT(+1)orTIDSS01.POS.IBD.DR0100.DAT.G001V00 So I suspect that you have the wrong file name.Please talk with your mainframe team.
HI Dan, I am very new to using power exchnage please help me through this issue, Below is the details : My data map name :postest.test1_POS
Copy book name which is used to create the power exchange Datamap : TIDSS01.ACTRLP.TEST(POSCPY)
Main frame GDG name : TIDSS01.POS.IBD.DR0100.DAT Below are the Session properties i have set in informatica workflow:Schema Name Override : postest
Map Name Override : test1_POS
PWX Partition Strategy : Overrides driven
Space : CYLINDER
File Name Override :TIDSS01.POS.IBD.DR0100.DAT(+1)
I am getting below error: PWXPC_12190
Message: [ERROR] Transformation [test1_POS]: A permanent error has been encountered in PowerExchange: [
[Informatica][SCLI PWX Driver] PWX-00267 DBAPI Error. DB_INSERT failed for file postest.test1_POS.
[Informatica][SCLI PWX Driver] PWX-01279 DBNTC INSERT failed for file postest.test1_POS. Rcs 1274/2019/268.
[Informatica][SCLI PWX Driver] PWX-01274 DBNTC INSERT Failed for file postest.test1_POS, rcs 260/2019/268.
[Informatica][SCLI PWX Driver] PWX-02019 SQL insert failure. SQLCODE = 268.
[Informatica][SCLI PWX Driver] PWX-00268 DBAPI Error. DB_OPEN failed for file TIDSS01.POS.IBD.DR0100.DAT.
[Informatica][SCLI PWX Driver] PWX-00220 DYNALLOC failed for file TIDSS01.POS.IBD.DR0100.DAT RCs = 9700/0.
[Informatica][SCLI PWX Driver] PWX-00221 DATA SET: TIDSS01.POS.IBD.DR0100.DAT WITH RETURN CODE 08 REASON CODE 00
[Informatica][SCLI PWX Driver] PWX-00221 RACF FUNCTION: RACDEF FOR
[Informatica][SCLI PWX Driver] PWX-00221 IGD308I DATA SET ALLOCATION REQUEST FAILED -
[Informatica][SCLI PWX Driver] PWX-00221 IKJ56893I DATA SET TIDSS01.POS.IBD.DR0100.DAT NOT ALLOCATED+
[Informatica][SCLI PWX Driver] PWX-07404 Permanent error set by Open call on file "TIDSS01.POS.IBD.DR0100.DAT" because dynamic allocation failed. rc=4
[Informatica][SCLI PWX Driver] PWX-07515 Insert call for table postest.test1_POS met a permanent error. Return codes 267 2019 268.
] -
I'm just formatting a second hard drive for backup purposes. I've decided I want to zero out all data to ensure that the drive maps out bad blocks, and then I'm going to create a GUID partition just in case I decide to make it a boot drive in future.
Three questions:
Why doesn't Disk Utility give you the option of Zero Out All Data and GUID partition as a 'one stop shop'?
Is there any disadvantage to having a GUID partition on a backup drive?
Are any remapped bad blocks found during the zeroing process retained after the GUID partition erase?Zeroing and GUID don't always go together. AIUI, GUID is only compulsory for a boot partition for Intel Macs; and it is recommended for volumes used by Time Machine. Otherwise, Apple Partition Map will usually be required since it can be read by both Intel and PowerPC Macs.
The disadvantage to having a GUID partition is that it won't be readable by PowerPC Macs.
Simon -
I bought the Garmin app for $50 as the maps on my garmin in my car are not current. I thought this would avoid the need to travel with 2 devices. However, the maps are hopelessly out of date for where I live with roads and roundabouts that have been there for more than a year not on the maps. I went to the apple store to ask them what to do. they said contact Garmin. I did and they said it was only apple who could give me the refund. So I found the receipt and clicked on "do you have a problem with this app" and was redirected to Garmin. I called them( I was on hold a long time) and they said I would need to get the refund from apple.... but I can't find a way to do this. If the app had been 99 cents that would have been OK.. I've bought a few duds , but $49.99!!!
How can I get to contact apple store/ App store directly to get the refund.. this has been going on for weeks with me getting the run around from Garmin and apple. PS don't buy this app!!!!Garmin is sending you to Apple because it is Apple that would have to give you a refund as the actual point of sale. However, Apple states all sales are final.
Apple is sending you to Garmin because it is Garmin's fault their maps are out of date and Apple doesn't write the software. They may not even be looking that deeply and simply perceiving it as a programming "bug" it is up to Garmin to solve.
Who know whose fault it is that Garmin isn't getting up to date data to put in their maps.
Ultimately I think you stand the best chance in getting a refund from Apple though it isn't guaranteed. Apple is the cashier. You just have to convince them this isn't just a line of code omitted from an application and isn't something that will be soon corrected by Garmin. Make it clear it isn't a problem with the application running on your device, it is a problem with the data it contains. Either that or you have to hope Garmin will feel so bad about it they will delve down into their slush fund and send you a refund. -
How to map between child objects in a Siebel Data Map
Hello. I need to map a field from one child object to another child object using a Siebel Data Map.
Specifically, I have an Integration Object set up for FINS Group Policy with 2 child components (Action and Proposal). I want to map the Proposal's name to the Activity's Description. Here's the structure:
Policy (io)
-Name
-Action (io)
--Description
-Proposal (io)
--PPSLFileName (this is the proposal's file name)
I can map from the parent (Policy) to the child (Action) as follows:
Integration Component Map: Action-to_Action
Source Expression: [FINS Group Policy.Name]
Target Field Name: Description
This will map the Policy's Name to the Activity's Description.
I tried these, but they don't work:
1)
Integration Component Map: Action-to_Action
Source Expression: [FINS Group Policy.Proposal.PPSLFileName]
Target Field Name: Description
2)
Integration Component Map: Action-to_Action
Source Expression: [Proposal.PPSLFileName]
Target Field Name: Description
Thanks for any helpHi,
For your issue,you can use the 2nd point what u hv mentioned :-
Integration Component Map: Action-to_Action
Source Expression: [Proposal.PPSLFileName]
Target Field Name: Description
But it has some limitations,i.e the child's(Proposal) cardinality should be 1 or less than 1 i.e no. of instances of Proposal IC should not exceed 1 or else the data map will error out at runtime.
Regards,
Sambit -
User Rules in Data Mapping in SQL Developer Migration Workbench
Hi
I was trying to add a User Mapping Rule in the Data Mapping, because the options provided where not entirely what I wanted.
Adding a new Rule for instance for SQL Server UniqueIdentifier works fine, but when I try to apply the changes it says that there was a duplicate rule for UniqueIdentifier. The option of removing the standard system rule is grayed out.
How is this supposed to work?
Thanks
KarlBarry
I don't quite understand what you mean by not been the same
If I add a new UserRule, I have the choice among the available source types
I choose for instance UniqueIdentifier and tell it, that I would like to have to option of converting to a VarChar2(36). I close the add new rule form and have the new user rule in the list. If I check the options in my new rule at that point, it shows all options from the system rule for UniqueIdentifier as well. Moreover, if I check the available options in the standard rule for UniqueIdentifier it shows my new VarChar2(36) as well.
When I try to close the mapping form at the point it complains about duplicate entries, which sounds reasonable after what I eplained above. But neither did I tell the system, that I would like to inhert the system rules for UniqueIdentifier in my new user rule, nor was it my intention for my new VarChar2(36) option to show up in the standard rule.
Could you please restate what you tried to explain me in your post.
Karl -
Hi Guys,
I am fairly new to the development side of the collectors for Sentinel,
and have what may be a total beginners question but I've tried the docs
and feel I am getting no where with an answer so hopefully you can help
out
So I am constructing an event from within the collector, I have read
that its best practice to try to use maps where possible so I am trying
to do this. If I hard code for example e.TargetUserID = <the parsed
string that I have>, then that works, but I want to try to make use of
the Rec2Evt.map as most of the data that I am populating at this point
is listed in here.
What I have done is to add into the the following:
Code:
Collector.prototype.initialize = function() {
this.MAPS.Rec2Evt = new DataMap(this.CONFIG.collDir + "/Rec2Evt.map");
Then within parse have the following:
Code:
rec.testIP = "123.4.5.6";
rec.convert(this, instance.MAPS.Rec2Evt);
instance.SEND_EVENT = true;
return true;
Within the Rec2Evt.map file it has the default list of Sentinel Event
Fields and I have appended a record for TargetIP: TargetIP,testIP
Have I missed any obvious steps out? What I was expecting to happen was
when the event is recieved and parsed in Sentinel the TargetIP field
should have the value 123.4.5.6, when I look in either the ESM or the
Sentinel 7 webUI I dont see this field getting set, other fields which I
manually set are being set correctly.
This is the first time that I have tried to use the data maps so I
assume I am doing something wrong and any pointers you guys have would
be great,
Thanks
alanforrest
alanforrest's Profile: http://forums.novell.com/member.php?userid=90508
View this thread: http://forums.novell.com/showthread.php?t=453791Hi Alan,
I'm not quite sure what you mean by "3 or 4 attributes", but here are
some guidelines:
Part of the Collector development process is to make a best-effort
attempt to parse out semantically distinct fields from the input and map
them to the Sentinel schema in a normalized way. Sometimes this is easy
- there's an IP address that's the target of a connection, extract it
and map it to TargetIP (TargetIP should already exist in Rec2Evt.map and
you just need to list the 'rec' attribute into which you parsed that
target IP). Sometimes this requires a little more work, for example
timestamps and whatnot that need normalization. Sometimes this is really
tricky, and you can't find a nice match to a Sentinel schema field.
Let's break this down into the following categories:
1) Simple 1:1 matches, like the IP address example above
2) 1:N matches, where you need to subparse a bit. An example might be a
path like C:\WINDOWS\system32\etc\hosts; this would map to
TargetDataName = 'hosts', TargetDataContainer = '/windows/system32',
TargetDataNamespace = 'c' (note that since Windows is case-insensitive,
everything has been lowercased and the path separators normalized - we
provide some utility flags and methods for this in the latest SDK which
will be out soon.
3) Mapped matches: in this scenario, you have a field maybe that
indicates severity using some arbitrary proprietary scale, and you need
to map this to Sentinel's 0-5 Severity. In this case it's good to use a
KeyMap, put all your possible input values in the LHC, and then map them
to Sentinel Severities in the RHC. Then you can use lookup() to look up
your input and map it to the correct output, put that output in a 'rec'
attribute, and then list that attribute in Rec2Evt.map (in this example
on the RHS after 'Severity,'
4) No schema match, doesn't need to be correlated: An example here
might be "session type", which is something that Windows provides but
that we don't (yet) have a dedicated schema field for (although we are
considering it). Let's say you want to record that information in the
event, but you don't need to correlate on that value. In that case you
can use the 'add2EI()' method to add an JSON NVP to the
ExtendedInformation field, something like 'LoginType: interactive'.
5) No schema match, need to correlate: This is the trickiest case,
where you can't find a place to put your data but you need it in a
separate field so you can correlate on it. For this scenario you can use
one of the many unallocated ReservedVarXX fields. What you need to do is
pick an unused field, add it to Rec2Evt.map, and map your data to it.
The trick is that you can't guarantee that some other Collector is not
using that field for a different purpose, so you have to be a bit more
careful when writing correlation rules etc to filter for your data
only.
In other words, the only attributes you should ever be adding to
Rec2Evt.map are ReservedVar fields. BTW, the event schema is fully
documented here:'Sentinel Event Schema'
(http://www.novell.com/developer/plug...nt_schema.html)
but note that not all fields are present in all platforms.
DCorlette
DCorlette's Profile: http://forums.novell.com/member.php?userid=4437
View this thread: http://forums.novell.com/showthread.php?t=453791 -
Problem I keep seeing messages Foxfire is out of Date BUT I have version 30.0
I go on to Facebook, it says Foxfire (version 30.0) is out of Date. I go to use Hulu or Crackle and again it says Foxfire is out of Date. I go to mozilla Support at the top, left side of the screen it says, "Your Foxfire is out of date and may contain a security risk".
While in Foxfire to check which version is on my Desktop PC by clicking on Help then scroll down to ABOUT Foxfire it says: 30.0 Foxfire IS up to date.
I do use Google Chrome however my TomTom GPS will NOT allow me to upload maps on Chrome but works fine with Foxfire.
Also a problem, Google's GMail will NOT allow me to open any of my E Mails on Foxfire. So am I using the latest version of Foxfire or not.
IF I am NOT using the latest of version of Foxfire please provide the link for the correct download.
Thanks in advance ~ CuriousVirg ~'''I am not 100 % sure if this will fix the issue of Firefox "being out of date or insecure", but I will keep checking over the next few days since like I said my browser of choice is Google Chrome ~ thank you philipp.'' Oh and, the-edmeister problem being the link for Wikipedia was not very useful since I couldn't make heads or tails out of the article.. but I will be double checking using the term, general.useragent in the search bar!! I do appreciate the help! Thank you!
-
Is CS6 capable of 'Data Mapping' from an excel based database?
I have CS6 and want to know if it is capable of data mapping from an excel based database.
Basically i am using inDesign to create new Organisational Charts for my company. i have 23 seperate documents created, all of which conatin; 1 image box and 2 text boxes per each employee in that particular department.
I want each document from inDesign to point at the database and pull in the correct details to each box within that document.
I am aware of the 'place' feature but all this does is allow to you to select a range of cells and dump that in the document randomly.
i have tried ringing adobe and they ponted me to here.
I am a man on the edge with this... someone please help. Even if its to say 'NO' inDesign does not support this feature.
Thanks in advance, Danny.Danity7 wrote:
My companies views, much like my own (something which seems to be frowned upon in this forum 'opinions/views') when we have spent a considerable amount of money on the software, we belived the answer to using certain features or at least the answer to 'know' if the software is capable of doing a particular commend wouldnt come at an extra cost.
Well, without more information on your data, the layout in ID, and how you expect to connect them, as Mike has already said, it's pretty hard to tell you what out of the box capabilities ID has that will work, if any, or where to point you to other commercial add-on products if they exist, or even to suggest a scripted solution, though my current reaction is that you are looking at some sort of XML workflow, which is well outside my own comfort zone.
ID is a very complex program that has many more capabilities than what are "built-in" in the standard release versions. One of it's greatest features is the ability to expand what you can do through scripts or plugins. This forum is full of free advice, but very few participants are willing to to spend more than an hour designing a custom solution that will not be useful to anyone else unless they are compensated. The people who respond here are professionals, like you, who need to make a living. If I were paid for the time I spend here handing out free solutions and advice I wouldn't need my regular design business anymore.
If you feel a feature should be included in the general release at no additional cost, please ask Adobe to do so: Adobe - Feature Request/Bug Report Form
You need to understand, though, that Adobe is a big corporation that budgets the time that developers can spend on new features, and most new things that are added are features that many users have asked for, and usually over the course of several versions (long document users are still waiting for improved footnotes, unchanged since they were introduced), so unless this is a "killer" new idea that will benefit thousands of users you are unlikely to see Adobe add it any time soon, if at all. -
Generate human-readable metadata out of a mapping?
Hi, has anyone figured out a way to generate human-readable metadata out of a mapping? For instance, one of our developers would like to have a legible "lineage" dump that would show each target column, and all the input columns and/or transformations required to get from the source to there.
If so, we'd sure like a chance to talk it over with you!
Thanks,
ScottHi Scott,
Sounds like an enhancement request for the Metadata dependency manager. You can do this for tables already. But you still have to open all mappings from the manager to find out where the data for a particular column is coming from. Not easy, but it can be done if the problem is urgent.
Another possibility would be to use tcl/OMBPlus and start from OMBRETRIEVE MAPPING 'SOME NAME' GET PROPERTIES (TARGET_LOAD_ORDER)
This will give you a list of tables that are the target(s) for the mapping. From there you can retrieve the connections of the individual columns to their predecessor (operator or table) and repeat that all the way back to the beginning of the mapping.
This would be for an individual mapping. You then have to figure out how the mappings are related. And the dependency manager shows that can be done.
I personally don't think I will start developing this right now, though, like you, I would be very interested in the result.
Kind regards,
Eric. -
Did you know that your Internet Explorer is out of date?
Hello there,
when i access this site http://www.sickkids.ca/ , I am getting this error message, please advice.
Did you know that your Internet Explorer is out of date?
To get the best possible experience using our website we recommend that you upgrade to a newer version or other web browser. A list of the most popular web browsers can be found below"It's probably giving you that warning because your Firefox is very out of date. Please read [http://www.getfirefox.com www.getfirefox.com] to see how to update to the latest version of Firefox (14.0.1 right now)
-
I have a macbook pro, and am trying to update my software. I recently bought an iphone 5, and my software is to out of date to sync my phone with itunes. I currently am running 10.5.8 and I need to update to atleast 10.6.8. Just wondering if I need to purchase it from apple or if there is an easy/free way to update it.
you need to purchase it: http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard. It is only on a disk, not in download form.
Maybe you are looking for
-
Some keys stopped responding apparently after latest update
Dear all, all of the sudden, apparently after the latest update, some keys on my native keyboard stop responding from time to time. Mostly I can verify the problem with the a, s, k and l keys. It seems that pressing the combination ctrl+alt solves th
-
Usb not detected in windows 8.1
Hi, First of all thank you. I am happy with your customer support. I had a problem with the unresponsive screen in my HP OMNI 10 which has been solved now. Now i am facing a new problem with the USB. I have tried all the possible methods but i am not
-
I was Installing ML and it came up, 'Install 'failed'. Mac HD is damaged and can't be repaired. I cannot get back to my desktop, this keeps coming up. What do I do, I'm desparate! Urgent.
-
Console Application Stopped Working : Problem Event Name: CLR20r3
When executing the SMSConsoleApplication.exe on my server (via rdp) the process opens and closes within a few seconds by monitoring it via task manager. This happens when I run it as my user or as local admin in the server. When I execute the app on
-
Can I share photos to facebook on the message center (ios6)?
I would post a picture on facebook over the message center.. I can post a text, but a photo..??