Out of interest any UK users....

Is there anybody in the UK managed to get iChat 4 to work with Virgin Media or BT total Broadband, any way at all is good either both users using the same ISP or each user using different ISPs.
I'm having major problems connecting to a video chat (like a lot of people). I have VM and my dad has BT and I can't get them to play at all, I've even been to a friends who uses BT and it still wouldn't connect when both users used the same ISP (BT).

Hi
Are you cable or ADSL Virgin media.
A friend and my brother and sister have virgin media cable and connect to me fine using ADSL2+ though BE*.
Has your father got a BThomehub.
Try connecting to me defcom1 .mac account.
Tony

Similar Messages

Is there any way to find out a Tcode used by user in a particular interval.

Hi
Is there any way to find out a Tcode used by user between 10/8/2009 to 31/8/2009, in production?
Satish.

Yes i have been trying SE16N only. But i am unable to pull data based on dates (Aug/8 to Aug 21)... its showing list of users who have accessed the tcodes directly for entire month....
Se16n ->Export mode->month->08/2009
---> Transacction profile -->Standard
I want to find out only users who have used a particular tcode during those dates.....in august..
Satish

Any Papers Users?

Any Papers users out there that wouldn't mind offering some tips and or overview on how they are using this software?
I am trying to get a handle on the pdf's on my hard drive (primarily) but am also interested in seeing and/or organizing other text based documents.
TIA

Hi. Yes.
I am asking if there are any Pages users using the software Papers.
If you use the software can you add anything?
Thanks.

How to find out the list of all user's whose passwords are expired

Hi
i had tried to find out the list of all user's whose passwords are expired.
i had written some jndi code by finding the max age and then find out the current time and subtracted this current time from max age using the following code
"Attributes attbts=ctx.getAttributes("cn=pwdpolicy");
String maxAge=(String)attbts.get("pwdMaxAge").get();
Date Today = new Date();
System.out.println("maxAge"+maxAge);
long curTime=(Today.getTime())-Long.parseLong(maxAge)*1000;"
and then parse it and create a string time as follows
String time=year+month+day+hour+minute+second+"Z";
where "year" "month" etc were parsed from curTime
now i can get the list by using following code
"String filterCriteria="(&(objectclass=person)(pwdChangedTime>="+time+")";
NamingEnumeration results = ctx.search(baseDN,filterCriteria, sc); "
but the current time which i am getting is the time of my system not the time of ldap server
so my questions are following;
1.Can there is any way by which i can get the tivole sever's system time.
2.If there is no way then can you suggest any other way to find out the list of user's whose passwords are expired.
please help me.
Thanks.
Krishan Rathi.

Hi,
Thanx for ur reply..
I got the list from the table...
thanks,
sivagami

Any new user creation gets: unable to log into user account error

Sort of reposting from http://discussions.apple.com/thread.jspa?threadID=2795507&tstart=0 as that initial question was answered.
Anyway, running an xserve managing all network accounts (only local accounts are a local admin on each system). DNS checks out and all current users can log in fine. However, it seems any new user I create keeps getting this wonderfully ambiguous error. I've tried Guest (but figured it probably interfered with the Guest Account), Student (but thought it might be interfering with a group of the same name), Guest Student, and Temp User.

Just making sure, you have selected the home location, and then actually pressed the "Create home" button? I have missed it few times and then wondered why it is not working. Then check the home folder location that it is actually there and created successfully.
Yeah, and then hit Save!
Message was edited by: VincensoXFIN

Wmi script to find out the time when the user was added to local administration group

Hi Friends,
i need a script/query based on wmi/wql that find out the time when the user was added to local administration group on this computer
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

WMI does not keep security information.
Unless you have enabled auditing, this information is not retained in any way.
If auditing is enabled, you can write a powershell script to look for the specific event in the eventlog. More specifically, you should look for all security events with id 4732 containing the group.
this one command does the trick
get-eventlog -logname security -instanceid 4732 -message *administrators*
https://technet.microsoft.com/en-us/library/dd772663(v=ws.10).aspx
MCP/MCSA/MCTS/MCITP

Dvd stoped being recognized by my cumputer macbook pro the last ones made before unibody came out anybody have any suggestions as to what might be wrong?

dvd stoped being recognized by my cumputer macbook pro the last ones made before unibody came out anybody have any suggestions as to what might be wrong?

My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck!

3G Ipod earphones (headphones) died. OUT of warranty. any suggestions?

3G Ipod earphones (headphones) died. OUT of warranty. any suggestions for non-apple brand earphones that are good quality?
thanks.

Thanks everyone for your advice, although i dont think im going to try chucking it off any sofas. unfortunatley there are no apple stores in ireland but im contacting the 3 apple authorised resellers in dublin. so far they have directed me to an ipod repairer in the uk - www.ukipodrepairs.co.uk, if anyone is interested. its gona cost me at least 125 pounds sterling (180 euro, 220 dollars) to get it fixed- i ain't made of money people!
is it common for an ipod to go kaputt after just over a year? i feel very hard done by because i didn't do anything to it to make it stop working. could it be a manufacturing problem?

Any WavePad users?

Hi.
Recently I downloaded WavePad to tidy up a few tracks by giving them a fade out instead of then ending abruptly. However, it seems I can't export them back into iTunes in the native m4a format once they've been edited. By labelling them mp3 everything works okay and iTunes accepts them.
It is then possible to convert the mp3 files back to ACC with the button in the iTunes Advanced menu, but it all seems so cumbersome.
My questions are:
1. Is it me, or is there no way to get iTunes to accept the m4a format directly from WavePad, and
2. Does it matter anyway? Is there any difference in quality between m4a and mp3 quality?
Hope the above makes sense to a fellow WavePad user.

Hi. Yes.
I am asking if there are any Pages users using the software Papers.
If you use the software can you add anything?
Thanks.

How to find out the cost of SAP user for a particular user id

Dear All,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
Raghu

Hello Raghu,
I got one issue like how to find out the cost of SAP user, i mean for a particular user id.
Could you please advice me regarding this.
I think you need to reach out to BASIS consultant to check out the Cost involved for User ID for the SAP application.
Regards,
Sarthak

How to find out the URL of the user coming from?

Hi folks,
From the HttpServletRequest, is there a way to find out the URL of the user coming from?
Thanks in advance!
Billy

It is strange. The link is on a different http site eg. http://www.othersite.com. The link is pointing https://www,mysite.com/index.html. I put the alert(document.referer) on the index.html. Using FireFox will show the alert http://www.othersite.com every time. However, on IE, the first time is empty. The second time I click on the link, it will show http://www.othersite.com. Very consistent.

How to check mass change(vendor) done by any particular user .

Hi,
What is a transaction used to check mass change(vendor) done by any particular user .
Thanks,
Dharmesh

HI
pls try this table CDHDR
Thanks & Regards
Phaneendra

My friend gave his Macbook pro to me a month ago but he forgot his password. I want to log him out and creat a new user account of myself.

my friend gave his Macbook pro to me a month ago but he forgot his password. I want to log him out and creat a new user account of myself.

Did your friend also provided you with the original DVDs that came with the MacBook Pro?

I have an iphone with the app GOOD to read e-mails. I sync to my other PC having first updated itunes. During sync it reported that it had removed GOOD, with out asking. Any ideas?

I have an iphone with the app GOOD to read e-mails. I sync to my other PC having first updated itunes. During sync it reported that it had removed GOOD, with out asking. Any ideas?

With the iPhone, you can sync all iTunes content with only one computer. Trying to sync iTunes content with a second computer will result in iTunes erasing the content from the first computer.

I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts?

I have an iphone5 that is eating up data time and I can't figure out why? Any thoughts? I have closed everyting I can, even took the phone to Verizon and they are not sure what is going on. My company email is active and pushes to the phone....I use Safari regularly to look up stuff for personal and work use. I am on Facebook but have turned it off in notifications. Four phones and a hotspot on the account....we have 6g and have never come close to it, until lately and it's my phone that's eating up the gigs. So what the heck is going on?

Go to Settings/Cellular and you can see how much data each app is using. You can Reset Statistics, then track all of the apps data usage.

Out of interest any UK users....

Similar Messages

Maybe you are looking for