Out of memory error back in lightroom 1.3

My wife likes to print lots of pictures on one page, like 8 to 16 typically.
lately while printing instead of printing pictures, random frames wil be grey and read out of memory. the monitor displays the photo however. looking at the print jobs the pages with problems typically are very small like several hundred K instead of megs. Im running vista on a athlon64 x2 4400+ to an epson pm4000px (japanese version of the 2200 or 2100) on 2 gigs of ram.
other times I get an error that says job failed to spool.
restarting lightroom temporarily fixes stuff.
please help.
Deacon MacMillan

Can you specify:
Which ID version do you use?
Which OS do you run?
Which computer model?
How much RAM do you have?
How much disk space is left?
What is the size of the document?
What is the size of the linked content? Or did you have it embedded?

Similar Messages

Out of memory error when encoding hd video

I've been using various versions of premiere elements over the past few years. It's been mostly a torturous process. I tried sony vegas but didn't like it. about 3 months ago i got a Rain Venturi, Intel xeon 3.07 Ghz, windows 7 pro 64 bit, and upgraded the memory to 24gb. things got better but Premiere 9 was still crashing!! especially when adding titles. I changed the video card to a quadro 4000 and for the first time elements worked. It was actually enjoyable editing! My movies are hd about 8-14 min. in length some for saving to my computer. ocasionally i may throw one up on you-tube. they have about 25-30 cuts, some transitions and titles. Last week, while saving a video it started out fine until it get down to 99% complete - 5 sec. remaining and it would hang there for an hour or two until done. Today I tried saving a video and I keep getting "Windows media is out of memory. The operation failed" message. I tried restarting Premiere and changing the keyframe interval to 2 sec, but no change. Anyone know what is going on here? How could I be out of memory? I read about out of memory messages in the lightroom forum and it being a bug in the software- is that what's happening here? Last month it worked fine now it doesn't? Am I better off with premiere pro? I'm just about fed up with elements and am thinking of trying edius neo3? Thank you for reading...

Bill and Steve- first off thank you both for taking the time to reply to my problem. Steve I will now render on a regular basis. Bill what you sent me was very informative and I'll admit there were portions of it that i didn't understand and need to look closer but I did do some disk ceanups etc. I tried many different things trying to figure out what was going on here. It just didn't make any sense that I would be out of memory. And things were working fine up till a few days ago. Anyway, there was some multiple titles on video tracks 2 and 3 that I though might be causing the hang-ups so I eliminated that and tried to save again.
I walked away figuring it would take several hours to save this 14 min. video. When I returned I had a new error message- "If writing to a remote page file location make sure the target location is available" What! I checked and sure enough the drive I was saving to was dead ( an external USB2 disk drive, 7200 rpm about 60% free) Anyway I plugged in a new lacie USB3 drive and the video rendered and saved ( faster then ever!) Tried saving another video and everything was smooth again and fast! So it seems that somehow this drive was failing or slowing down over the last few days?? and that was causing the problem? (but the error message - "windows media is out of memory" was deceiving). Now that I think about it maybe the disk cleanup I performed over the weekend pushed the drive over the edge? anyway what a relief - but of course I didn't back the drive up on a regular basis so who knows what I lost! so what I learned is keep the disks clean and back-up often. Thanks again.

Acrobat XI Pro "Out of Memory" error after Office 2010 install

Good Afternoon,
We recently pushed Office 2010 to our users and are now getting reports of previous installs of Adobe Acrobat XI Pro no longer working but throwing "Out of Memory" errors.
We are in a Windows XP environment. All machines are HP 8440p/6930p/6910 with the same Service pack level (3) and all up to date on security patches.
All machines are running Office 2010 SP1.
All machines have 2GB or 4GB of RAM (Only 3.25GB recognized as we are a 32bit OS environment).
All machines have adequate free space (ranging from 50gb to 200gb of free space).
All machines are set to 4096mb initial page file size with 8192mb maximum page file size.
All machines with Acrobat XI Pro *DO NOT* have Reader XI installed alongside. If Reader is installed, it is Reader 10.1 or higher.
The following troubleshooting steps have been taken:
Verify page file size (4096mb - 8192mb).
Deleted local user and Windows temp files (%temp% and c:\WINDOWS\Temp both emptied).
Repair on Adobe Acrobat XI Pro install. No change.
Uninstall Acrobat Pro XI, reboot, re-install. No change.
Uninstall Acrobat Pro XI Pro along with *ALL* other Adobe applications presently installed (Flash Player, Air), delete all Adobe folders and files found in a full search of the C drive, delete all orphaned Registry entries for all Adobe products, re-empty all temp folders, reboot.
Re-install Adobe Acrobat XI Pro. No change.
Disable enhanced security in Acrobat XI Pro. No change.
Renamed Acrobat XI's plug_ins folder to plug_ins.old.
You *can* get Acrobat to open once this is done but when you attempt to edit a file or enter data into a form, you get the message, "The "Updater" plug-in has been removed. Please re-install Acrobat to continue viewing the current file."
A repair on the Office 2010 install and re-installing Office 2010 also had no effect.
At this point, short of re-imaging the machines (which is *not* an option), we are stumped.
We have not yet tried rolling back a user to Office 2007 as the upgrade initiative is enterprise-wide and rolling back would not be considered a solution.
Anyone have any ideas beyond what has been tried so far?

As mentioned, the TEMP folder is typically the problem. MS limits the size of this folder and you have 2 choices: 1. empty it or 2. increase the size limit. I am not positive this is the issue, but it does crop up at times. It does not matter how big your harddrive is, it is a matter of the amount of space that MS has allocated for virtual memory. I am surprised that there is an issue with 64GB of RAM, but MS is real good at letting you know you can't have it all for use because you might want to open up something else. That is why a lot of big packages turn off some of the limits of Windows or use Linux.

E71 keeps giving out of memory error; I can't find...

My Nokia E71 (it's black so it may be an E71x, I guess) keeps giving me out of memory errors. I use my phone for nothing but voice calls, text messages, and emails. I have cleared all call logs, deleted all emails except 5 (they have no attachments) and cleared deleted emails, and deleted all text messages. I went into file manager and made sure there are no images, videos, etc. on the phone. I set up options to use memory card for emails. I've turned the phone off, waited 15 or 20 seconds, and turned it back on.
I did all this a couple weeks ago. Ever since then. every couple days I get these out of memory errors, and the phone memory shows me 119 MB used and something like 300K free. I'm at the point where every few emails that come in, I have to delete all emails, erase all text messages, etc. or the phone is just too low on memory to operate.
What else can I try? I don't have any additional applications installed. I've even tried to delete built-in apps such as RealPlayer but it didn't seem like that was possible.
This is getting really annoying. Please help!

@EricHarmon
Although all user data would be deleted, have you tried resetting device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user)?
Happy to have helped forum with a Support Ratio = 42.5

N97 out of memory errors

The product is N97, you don’t have in you drop down list!!!
I have had my n97 for about 10 days now and everything was going brilliant. It is a stunning piece of kit.
However on day 11. I repowered the n97, it kept on hanging the eventually got to boot after 20 attempts, but it was useless could not look up contacts. So I had taskman installed and killed loads of processes and uninstalled all the apps. It became usable as a very basic phone, but sluggish. Could use browser, maps, photos.
The problem is I keep on experiencing out of memory errors on the phone, when I try to do basic things. I don’t know how to resolve this. I have rebooted, reset the phone to factory settings.
Deleted data, uninstalled more apps and still no joy!! I cannot connect to ovi/pc suite to up grade the phone or roll it back.
Symptoms the phone is sluggish it is still virtually unusable. It just barely make phones and is slow to respond to touch-screen presses and key presses.
The taskman app says the is 47 mb free on C: drive. So I cant see what the problem is!!!
I have always bought nokia for 10 years, never experience this sort of thing before. I am really disappointed with this.
Anybody else experienced this? Any ideas?
Many thanks
Gd
Solved!
Go to Solution.

Copyless thanks for the tip. Kudos added :-)
I had the same problem a friend was trying to bluetooth some videos to me and I was getting Memory problem, How embarasing after a few min of my mates being impressed with the phone, and me praising it and talking about so much space and blah blah blah.
I could not receive videos via bluetooth because they were 5MB. WHY on EARTH can they not default this to the E: drive.
Whoever made that decision in NOKIA should be fired what an idiot.
Also when I finally got to get the pictures on the phone via a computer I could not see them via the "Photos" I had to go via the File Manager and see one by one. AARRRRRRRRGHHH I am getting to the point that I am going to return this phone.
N97 Black unlocked using the 3 Network (UK). Product Code 0586308. Firmware V20.0.019. Made In Finland.Custom version V20.019.235.10.

Out of Memory Errors when Exporting Slideshows

Hi -
I've been using LR for sometime now. Today, for the first time ever, I attempted to export a slideshow as a .pdf file, 90% quality setting, 48 slides total. LR created a 41MB file. However, when I played it back, there were many slides which only showed an empty frame with the message "out of memory error" upside down in the lower left corner of the frame. The same slides displayed the message each time I played it, so I'm sure the problem stemmed from creating the file, not showing it.
I have a core 2 duo machine with 4GB Ram and no other applications running at the time I exported the slideshow.
Any thoughts on this? BTW, I'm running version 1.2
Thanks!
E-

Try restarting and reexporting. OOM errors have little to do with how much memory you have or how much is available.

Out of Memory Error when transcoding

I am using winXP and Encore CS3. I don't have anything else open. My project is complete, but I cannot burn to DVD because I get this Out of Memory error, save and close to avoid loss. I am trying to transcode the audio track for the DVD. I've made 3 different projects. On one of the projects, I just downloaded, it did transcode. All of my menu work is in another program. Is there a way to get this one transcoded file over to the other project. Then I could be finished and burn. I don't understand why this one transcode will not work. the other music I brought in as assets for the menu and submenu transcoded fine. Sometime it will say 'transcode preset error'. I went all the way back to Premiere and changed setting there in hopes. can anyone help please

Thanks, disheartening? I'm distraught.
Everything else works, but not Encore. I tried to reinstall, but it keeps saying it cannot install until I close Bridge.
Bridge is not open.
I restarted. I uninstalled an earlier verion of Bridge.
Nothing doing.
still wants me to close Bridge.
I hate to do the whole thing over because of encore.
Help me think of a workaround!

Out of Memory Error - JBOSS - JRocket

I continue to see my jrocket/jboss/linux servers crash daily in production for out of memory errors. When we trace back the stack to find a query that does not appear to have nearly enough data to bring the server to an out of memory state. Heap useage pattern does not indicate any leak in the application.
Using RedHat Linux ES - rel. 4 - Nahant Update 4
startup with 1536m Xms/x
Any thoughts or previous expereince. This is a Java application servicing a Flex UI

Check your Linux kernel version.
If you have an unpatched Linux kernel, which is not compliant, you will see these errors for all Jrocket.
The 2,6,9-5 kernel is not compliant without patches, see:
http://e-docs.bea.com/jrockit/jrdocs/suppPlat/prodsupp.html#wp999048
excerpt
The JRockit JDK is supported on the default Linux kernel, which varies with the distribution and architecture. See the Notes field in the Summary of Supported Configurations by Release for details. If you require a different kernel, such as the hugemem kernel, contact Oracle Support for current support status.
Also, see references to x_86 64bit?
http://jira.jboss.org/jira/browse/JBPAPP-158
This is a 32bit ES - rel 4 correct?
This link also shows a fairly excellent step by step Out of Memory Troubleshooting session.

Out of Memory Error in ODI

We are working on Siebel to EBiz OIC PIP. This is direct integration using ODI.
When we are trying to move 4 lakh records from Siebel to EBiz OIC for PSR testing, Then the ODI process continue to run for ever and in the back ground (where the agent is started) we saw an out-of-memory error message.
Did any one of you come across such cases

If the issue come from ODI buffer.
You can maybe try to increase the MAX_HEAP_SIZE parameter on the ODIPARAMS.bat (odi_install --> oracledi --> bin).
Then restart your agent.
EDIT:
After taking a look to the documentation, if your agent is a windows Service and after updated the ODIPARams.bat the service
should be un-installed and then re-installed.
Edited by: BriceM on 6 nov. 2009 06:06

Why do I get a Track out of memory error while running open loop frequency response?

MatrixX Build 61mx1411: I get a "Track out of memory" error when I run the Open Loop Frequency Response from the MatrixX pull down tools. What can I do to prevent this? We are running on an HP B1000 with 768 MB of RAM under HP-UX 10.2.

In the old days of Mx say Version 5 and prior the user actually selected the amount of memory that would be allocated. Depending on the size of the model etc. you would have to allocate memory. In version 6.0 and going forward there is no need for the user to manually allocate the memory.
Build {rstack=50000,istack=200000,sstack=50000,cstack=500 000}
If this is a command in a script file that you are running and the error is resulting from that then I would try commenting out everything after the letter d in the word build and then starting it back up.
i.e. only use Build
I don't believe that there is a way to manually allocate the initial SystemBuild Stack size.
I believe initially the stack size is set to 10010.
However, one way
you can manually set the initial SystemBuild stack size,is to create a large StateSpace as soon as you start up SystemBuild. This will prevent piece-meal reallocs while using SystemBuild.
You can created a new SuperBlock in SystemBuild and then drop down a StateSpace Block with 199 inputs and 199 Outputs and 1 State and entered ones(200,200)as the StateSpace Matrix without any problems. This would resize this internal stack to at least 40000.
You really should not have to do this but if that helps then you might think about doing this in your startup.ms file you could use SBA or load the file then you could delete the superblock and begin working.
"Bob" gave me this little tid bit.
Please let me know if any of this is of use.
Garrett
Garrett Thurston
[email protected]
Phone: 781.993.5540

How can I solve out of memory error on excell file in PL/SQL

Hi,
I'm new on PL/SQL. One of the PL/SQL code which is created excell report got out of Memory error. The first reason of this error, excell file not supported more than 65536 data. So I change the excell file separeted sheets. So that the single sheet size cannot exceed 65536 data.
All the data are held on system cach and if many user want to take the report the they would get an out of memory error.
So I want to change the code like that; when out of memory exception raises,
the old excell file save to disk and new excell file is created,
and go on to write the new file without exiting the program.
At the end of the data all the excell file append and show only one file to the user.
I do know how to save the file and create a new file. But I don't know how can PL/SQL program to turn back to loop again when the exception occurs.
Is anyone help me on this issue?
Here is my code
Thank you
dworkbook:=hssfworkbook.new;
dCurrentItem := Get_Block_Property(pCurrentBlock, FIRST_ITEM);
while not (name_in('system.last_record')='TRUE') loop
/* The data would be written to the excell file column order. */
if (dRow=0) then
          /* Create a new sheet */
elsif (dRow <= dMaxWorksheetNum) then
     /* Data of the report are written here. The data are written in column order */
if (dRow > dMaxWorksheetNum) then
     /* give dRow and dColumn intial value */
/* increase worksheet number */
end if; /* End of if (dRow=1) */
if (isWritten) and not name_in('system.last_record')='TRUE'then
     /* if not at the end of the record and the previously read record is written to the file
     , then go to next record */
     next_record;
end if;
/* save excell report */
workbookwriter.save(dworkbook,global.gethome||dFileName);
web.show_document('/users/'||dFileName,'_BLANK');
/* when exceptions occurs */
EXCEPTION
WHEN ORA_JAVA.EXCEPTION_THROWN THEN
begin
     javaException := ORA_JAVA.LAST_EXCEPTION;
     -- Print out the Exception by using the toString()
     -- Method of the exception Object
     javaException2 := Exception_.new(javaException);
     mess(27002,Exception_.getMessage(javaException2));
     -- and clean up
     ORA_JAVA.CLEAR_EXCEPTION;
exception
     WHEN ORA_JAVA.JAVA_ERROR THEN
-- In this case, the error would be
-- Argument 1 can not be null
mess(27002,ORA_JAVA.LAST_ERROR);
--Clean up
ORA_JAVA.CLEAR_ERROR;
end;
WHEN ORA_JAVA.JAVA_ERROR THEN
-- In this case, the error would be
-- Argument 1 can not be null
message(ORA_JAVA.LAST_ERROR);
--Clean up
ORA_JAVA.CLEAR_ERROR;

No need to double-post... most questions are answered pretty quickly...

FCP - Out of Memory Error in 10.6.6

Running a MacBook Pro 17" (A1261) and while I edit, I got a "Out of Memory" Error and an "Invalid Operation". Can't reopen the sequence on my MacBook but it opens with no problem on a Mac Pro.
Gonna re-install the OS and see if that helps.

I just had something very similar happen. A sequence that I've been editing for over a month now no longer opens (since installing the 10.6.6 update) I'm getting the same "out of memory" and I/O error codes.
I'm at a loss what to do. Other editing projects open fine. But so far I haven't been able to open
any of the project files I've vaulted from the last six weeks.
Does anyone have any idea what changes 10.6.6 might have made to cause this and how
it could be rectified. I really need to get back into my project file.

JNI and Out of Memory errors

Hi,
At my job, we seem to have a memory leak related to JNI. We know we
have a memory leak because we keep getting Out of Memory errors even
after increasing the maximum heap size to more than 256 megs. And we
know that this is the application that is eating up all the system
memory.
We are running under Windows 2000, with both JDK 1.3.0 and JDK 1.4.1.
We tried looking at the problem under JProbe, but it shows a stable
Java heap (no problems, except that the Windows task manager shows it
growing and growing...)
I tried a strip down version, where I set the max heap size to 1 Meg,
and print out the total memory, memory used, and maximum memory used at
a 5 sec interval.
Memory used = Runtime.getRuntime().totalMemory() - Runtime.getRuntime().freeMemory().
Well, I let that strip down version running for about a day. The
maximum memory used has stabilized to about 1.1 Meg, and has not
increased. The current memory used increases until it gets to some
threshold, then it decreases again. However, the Windows task manager
shows the memory increasing -- and currently it is at 245 Megs!
In the lab, the behavior we see with the Windows task manager is as
follows:
1. Total memory used in the system increases until some threshold.
2. Then it goes back down by about 100 Megs.
3. This cycle continues, but at each cycle the memory goes back down
less and less, until the app crashes.
Now, our theory is that JNI is consuming all this memory (maybe we are
using JNI wrong). That's the only explanation we can come up with to
explain what we have seen (Java showing an OK heap, but the task
manager showing it growing, until crashing).
Does that make sense? Can the new operator throw an Out of Memory
error if the system does not have enough memory to give it, even if
there is still free heap space as far as the Runtime object is
concerned? Does the Runtime object figures objects allocated through
JNI methods into the heap used space?
Note that I know the task manager is not a reliable indicator.
However, I don't think a Java app is supposed to runaway with system
memory -- the problem is not simply that the Java app is consuming too
much memory, but that it seems to always want more memory. Besides, we
do get the Out of Memory error.
Thanks for your help,
Nicolas Rivera

Hi,
there are two sources of memory leakage in JNI:
- regular leaks in c/c++ code;
- not released local/global references of java objects in JNI.
I think that the first issue in not a problem for you. The second is more complex. In your JNI code you should check
- how many local references alive you keep in your code as their number is restricted (about 16 and can be enlarged). The good style is not to store local references but keep only global.
- any local reference accepted from java call in JNI are released by JVM. You should release local references you created in JNI and also global references.
- do not use a large number of java object references. Each new reference gets new memory in JVM. Try to reuse refences.
I guess that is your problem.
Vitally

Out of Memory error while builng HTML String from a Large HashMap.

Hi,
I am building an HTML string from a large map oject that consits of about 32000 objects using the Transformer class in java. As this HTML string needs to be displayed in the JSP page, the reponse time was too high and also some times it is throwing out of memory error.
Please let me know how i can implement the concept of building the library tree(folder structure) HTML string for the first set of say 1000 entries and then display in the web page and then detect an onScroll event and handle it in java Script functions and come back and build the tree for the next set of entries in the map and append this string to the previous one and accordingly display it.
please let me know whether
1. the suggested solution was the advisable one.
2. how to build tree(HTML String) for a set of entries in the map while iterating over the map.
3. How to detect a onScroll event and handle it.
Note : Handling the events in the JavaScript functions and displaying the tree is now being done using AJAX.
Thanks for help in Advance,
Kartheek

Hi
Sorry,
I haven't seen any error in the browser as this may be Out of memory error which was not handled. I got the the following error from the web logic console
org.apache.struts.actions.DispatchAction">Dispatch[serviceCenterHome] to method 'getUserLibraryTree' returned an exceptionjava.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:276)
     at org.apache.struts.actions.DispatchAction.execute(DispatchAction.java:196)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1164)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:415)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:996)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6452)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3661)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2630)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.OutOfMemoryError
</L_MSG>
<L_MSG MN="ILHD-1109" PID="adminserver" TID="ExecuteThread: '14' for queue: 'weblogic.kernel.Default'" DT="2012/04/18 7:56:17:146" PT="WARN" AP="" DN="" SN="" SR="org.apache.struts.action.RequestProcessor">Unhandled Exception thrown: class javax.servlet.ServletException</L_MSG>
<Apr 18, 2012 7:56:17 AM CDT> <Error> <HTTP> <BEA-101017> <[ServletContext(id=26367546,name=fcsi,context-path=/fcsi)] Root cause of ServletException.
*java.lang.OutOfMemoryError*
Please Advise.
Thanks for your help in advance,
Kartheek

Out of memory error, while using Adobe InDesign

I have been running Adobe inDesign for a couple of years with no problems. This is the first time I got a, "Out of memory" error when attempting to save the document as a PDF.
Windows 7, Dell Studio XPS, 2.80 GHz Processor, Memory: 9 GB Dram, Hard Drive: 1.5 TB, 1.56 MB cache.
Firefox v33.02
What should I do to get back the memory?
Thank you,
Don Schaaf

Hi Don, is this an Adobe site you are using in a Firefox tab, or the stand-alone InDesign application?
If it's in the application, you may want to try Adobe's forum. You also could try closing other open applications to have them release memory and then try creating the PDF again.
Please note that if Firefox has been running for a long time and is using a lot of memory, it may take several minutes to release it all, as various files are (slowly) updated at shutdown. You can monitor its progress in the Windows Task Manager on the Process tab. Press Ctrl+Shift+Esc to open the Task Manager, and then click the processes tab. Firefox will be listed under firefox.exe here. Please allow it to shut down normally instead of using the End Process button, unless it appears to hang (no movement in the amount of memory used for several minutes).

Out of memory error back in lightroom 1.3

Similar Messages

Maybe you are looking for