Out of memory on a new project with rushes only

Just started a new project, media is ProRes 1080, prob 2hrs worth of rushes.
When previewing the clips to log them in the browser I get an out of meory error after say 10 clips.
Clips are slow to load into the viewer also.
Anyone know of a remedy

Check drive space, all hard drives should have at least 15% of their space free. I'd use the Log & Transfer with Canon's plugin installed, transcode into ProRes LT (it supports higher quality than the 5D records in, saves drive space, easier to work with in Timelines).

Similar Messages

Cannot Start a new project with a mapped network drive

When I try to start a new project with Encore and save the file to our network cluster (An Isilon Server), I get a file not found error message. When I try to do this to a local drive, it works just fine. None of the other Adobe products (Photoshop, Illustrator, After Effects) have this problem with this network drive.
Greg Glaser

Yes, it worked on the local drive, and also to a Windows Networked Server that was not the Isilon. Even after creating the project and moving it to the Isilon, it was generating error messages after a few minutes of use. The Isilon is using a BSD variant of Linux and Samba. The really strange part is the all other Adobe products from the Production Suite work with this server without any problems at all.

My MacBook Air tells me I'm out of memory. to my knowledge I use only 65 GB for documents, photos, videos, apps, and it tells me that 75 GB is taken by "other" What is in other, and how can I fix it?

my MacBook Air tells me I'm out of memory. to my knowledge I use only 65 GB for documents, photos, videos, apps, and it tells me that 75 GB is taken by "other" What is in other, and how can I fix it?

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

Out of memory error - WLW Schema Project build

hi
Wasn't sure which group (workshop vs xmlbeans) but here goes.
I'm doing a persomal eval of the WLS 8.1.1. platform.
My current focus is on XML Schema support, XML Beans, transformations etc
and in particular how it all copes with large schema.
I'm using Justice XML Data Dictionary (3.0.0.0) as an example of a large
schema
(http://it.ojp.gov/jxdd/)
I am getting an out of memory error when I build this within WLW.
The build appears to be in the javac phase (and occurs when the memory goes
over 256M) so I think it's the ANT task.
WLW doesn't seem to be running out of memory and the build machine is not
running out of resources.
Where do I configure this? The <xmlbean> tag ? Is there any doco?
regards
Jim Nicolson
=============== Build trace below ====================
Build project JXDDSchema started.
BUILD STARTED
build:
check-uptodate:
build-sub:
Updating property file:
C:\data\projects\bea\integration\wlitest\.workshop\.ide\JXDDSchema\build.pro
perties
Deleting directory
C:\DOCUME~1\JIMNIC~1\LOCALS~1\Temp\.wlw-temp\wlw_compile38940\JXDDSchema
Created dir:
C:\DOCUME~1\JIMNIC~1\LOCALS~1\Temp\.wlw-temp\wlw_compile38940\JXDDSchema
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\jxdds_3.0.0.0_full-doc.x
sd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\iso_639-2t_1.0.0.0_full-
doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ut_offender-tracking-mis
c_1.0.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-gun_1.0.0.0_fu
ll-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-other-transact
ions_1.0.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-uniform-offens
e_1.0.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\mn_offense_1.0.0.0_full-
doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\dod_jcs-pub2.0-misc_1.0.
0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\cap_1.0.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\nibrs_misc_1.0.0.0_full-
doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\fips_6-4_1.0.0.0_full-do
c.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\iso_3166_1.0.0.0_full-do
c.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\dod_misc_1.0.0.0_full-do
c.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-misc_1.0.0.0_f
ull-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-boat_1.0.0.0_f
ull-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-securities_1.0
.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-article_1.0.0.
0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\unece_rec20-misc_1.0.0.0
_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-state-country_
1.0.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\iso_4217_1.0.0.0_full-do
c.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\fips_10-4_1.0.0.0_full-d
oc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ansi_d20_1.0.0.0_full-do
c.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\iso_639-2b_1.0.0.0_full-
doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\fips_5-2_1.0.0.0_full-do
c.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-vehicle_1.0.0.
0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\dod_exec-12958_1.0.0.0_f
ull-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\ncic_2000-personal-descr
iptors_1.0.0.0_full-doc.xsd
Loading schema file
C:\data\projects\bea\integration\wlitest\JXDDSchema\usps_states_1.0.0.0_full
-doc.xsd
Time to build schema type system: 6.75 seconds
The system is out of resources.
Consult the following stack trace for details.
java.lang.OutOfMemoryError
BUILD FAILED
BUILD FAILED

hi Kevin
Thanks I'll take a look there.
I think it's a good move to make XMLBeans open source.
(I've been using Castor for the same purpose for the last two years).
I was mainly focussed on XMLBeans as they are used in WLW context and my
testing suggested that I would probably want to know more about the ANT
build/tasks etc. (Just to be able to deal with unexpected issues)
It's not urgent - I'm just doing a personal eval to come up to speed with
WLS 8.1 platform.
thanks
Jim Nicolson
"Kevin Krouse" <[email protected]> wrote in message
news:[email protected]..
Sorry, the first URL should have been:
http://cvs.apache.org/viewcvs.cgi/*checkout*/xml-xmlbeans/v1/xkit/anttask.html?rev=1.2
>
--k
On Tue, 30 Sep 2003 22:35:58 -0700, Kevin Krouse wrote:
Hi Jim,
Well, the XMLBean docs are in a process of moving into the Apache
XMLBeans
project (http://xml.apache.org/xmlbeans), so I can point you to where
they
are in the cvs repository. You can also look at the source if you'dlike!
>>
Here's an html doc for the xmlbean task:
http://cvs.apache.org/viewcvs.cgi/*checkout*/xml-xmlbeans/v1/xkit/anttask.html?rev=1.2http://cvs.apache.org/viewcvs.cgi/*checkout*/xml-xmlbeans/v1/xkit/anttask.html?rev=1.2
>>
Here's the code for the xmlbean task:
http://cvs.apache.org/viewcvs.cgi/xml-xmlbeans/v1/src/xmlcomp/org/apache/xmlbeans/impl/tool/XMLBean.java?rev=HEAD&content-type=text/vnd.viewcvs-markup
>>
>>
As to your second question about WLW becoming unresponsive, after the
Schemas.jar is built, the source for the entire project is re-scanned
which could take several minutes. The performance impact of rescanning
the project is improved in SP2 and will be addressed even more in future
releases. Stay tuned.
--k

General Error and Out of Memory Error - affecting multiple projects

I am running Final Cut Pro 6 on my 1.25 GHz PowerPC G4 iMac, with 1.25 GB RAM. OS X 10.4.11.
I have had this setup for more than a year and used it without any problems.
I have two projects stored on an external LaCie firewire drive with more than 140GB disk space remaining. As of this morning, I cannot work on either of them: both are throwing the "General Error" message, and one of them is also telling me it's "Out of Memory". On project #1, the "Out of Memory" occurs whenever I try to open a clip in the viewer, following a "General Error" message. On project #2, the "General Error" message occurs when I try to open the project; it gets halfway through the process and then throws the error, leaving me unable to open the timeline.
Both projects are short, less than 3 minutes long, and neither project contains any CMYK or grayscale graphics. Project #2 does have a short Motion sequence.
Things I have tried:
~ restarting and hard-rebooting
~ trashing preferences
~ rebuilding permissions
~ trashing render files
~ creating a new project
~ searching this forum and Google for other answers
Help?

Thanks for the support, Jim. I've had terrible experiences with Firewire drives in the past, too; regrettably, there doesn't seem to be an affordable alternative at this point.
I just looked up resetting the PMU, as that's not something I've done before. I really hope it's that simple, as the thought of recreating all these clips makes my head hurt. But I'll definitely try your suggestion of reconnecting individual media files first. I've been through that before.

Apple HDV codec and Out of Memory error on transferred project

Hi,
I recently captured and have been editing fine with HDV footage on my iMac (surprisingly enough). My question is, I transfered the entire project to a collegue to edit on his new Powerbook(much faster than my machine) he gets two errors when he tries to open the sequence. 1. Codec not found. You may be using a compression type without the corresponding hardware card. Then, 2 - Out of Memory. He can play the audio off the QT movies but the display is only white. I looked up the Movie info for the QT movies and mine is reading that it is Apple HDV codec. The exact same clip's Movie info on his Powerbook is reading only HDV? Can anybody help? I'm pretty perplexed on this one.
Thanks!

It really would be useful if you included information like: FCP versions, QT versions, how the footage was captured and what codec was used?
Do you and he have matching versions of FCP? of QT?
If he doesn't have the codec you used to capture, then he t'aint gonna play the file. It is as simple as that.
x

I opened a new project with the same name as an existing project and it deleted my existing

Bad day on my part. I spent all day recording a song with Garageband. As I finished it, I exported it to iTunes (Thank God), closed garage band and listened to the song. Hearing that it had several seconds at the beginning that were silence and not edited out I opened a new Garageband project under the same project name as the previous one and it erased everything the previous project had. Leaving me with no file. No project. No memory of the initial project. Any clues or am I SOL?

SchilbAaron wrote:
I opened a new Garageband project under the same project name as the previous one
the OS should have asked if you wanted to replace the old file with this one. if it did not, perhaps you saved this file in a different folder and the old one still exists? You could try a spotlight search on your entire hard drive to see if both files exist.
if you did replace the old with the new, the only real hope is that you have a backup (perhaps you use Time Machine?)
SchilbAaron wrote:
Hearing that it had several seconds at the beginning that were silence and not edited out[...] am I SOL?
if that's the _only_ issue, not completely out of luck. you could drop the audio file back into a new GB project and export an exact length:
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen)
Note: if you compressed the export (mp3/acc) you'll be double compressing the file and losing a lot of musical information, but it may be better than losing a One-Time piece of work.
an alternate method would be to use an Audio Editor to cut out the silence. i'm not sure that this would save any quality, i think you'll still be double compressing the file, but it's something else to try, and listen to, to make a decision on which is better:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

Creating a new project with media manager

This one should be obvious but I can't quite figure it out: I used media manager to recompress my project into a smaller one. Media manager did a nice job with that and placed all the files into a new folder BUT - where is the actual project file?? If I use the actual fcp project file from the original- the settings are all different and it told me that some media files are missing or too short. Doesn't media manager create a new project file that works with the new recompressed files that it just created??

BUT - where is the actual project file??
When you have decided on the settings in Media Manager and then tell it to do the job, the first thing you see is a dialog asking where to save the project file. Use Spotlight to search for it.
If that doesn't turn anything up, start MM again, it might have remembered the last Save location.

Out of memory when i render HD with many layers

I got a message error ( out of memory ) when i render HD full 1920 X 1080 in final cut pro 5 with many layers ( 6 to 9 layers ). I have 5.5 gig of memory and when is crash....1.5gig of memory is free in my activity monitor. If a buy more ram...my problem will be resolve? Please help me if anybody know about this problem.
thank
Yan

I am having the same problem...(out of memory on renders)
I've been watching my activity monitor and cancelling the render before I run out of memory... but I'm not getting much done and I can't do a big render at night.
I've done all the usuall things... no CMYC files. Trash Prefrences... etc..
Two questions:
I am using Magic Bullet filters and they seem to stack up the inactive RAM. (When the incactive ram fills up that's when I get the "out of memeory") You said you saw a post about that a few days ago...Was there an answer besides changing out the filters? or can you point me towards the posting?
I'm also trying to figure out how to dump or clear the inactive RAM once I'm done with a render. I found that if I do a full restart I can clear my RAM and get a bunch of renders done before I fill up the inactive ram again. This is going to be a long project if I have to do that.
thanks
Mark

RoboHelp 7 crashes when creating new project with files from VSS

RoboHelp crashes when I create a new project and choose to get existing files from Visual Source Safe to load into the project. Does anyone have a solution to this problem or a suggestion as to why this may be happening? I'm attaching the errors associated with the crashing.
Also, we have a very large Help system (985 topics) which compiles into a 46 MB chm file. Is there a maximum suggested topic size (per topic) and a maximum suggested number of topics per project? Could this be part of the reason RoboHelp is crashing? We've always had a large Help system since we started using RoboHelp several years ago but the crashing is a more recent problem.
Thanks,
Carissa

I had the same issue then I found out all you have to do is to set the default view to List before opening any previous or new project and it worked, credit goes to this user below who found the solution.
ahmedMac25
I was able to resolve by workaround:
1. Closed all open applications
2. relaunch Finder
3. run sudo find / -name ".DS_Store" -exec rm {} \;
4. this removes all .DS_Store old files on the computer
5. launch finder and set default view to "LIST VIEW" as shown here:http://macs.about.com/od/usingyourmac/ss/Setting-Finder-Views-For-Folders-And-Su b-Folders_2.htm
5. rerun the offending application and file chooser works

Can I open a new project with 5 or 10 bins already in the browser?

Hi,
I'm wondering if I have to create and name five to ten bins every time I open a new project. Or is there a way to set FCP preferences to have a certain amount of bins and their names open every new project?
Thanks

You could however, create a "template" project. If you new the bins were going to be named the exact same thing for every project.
Just create a project, set up your bins and save as "template.fcp" (or whatever the fcp extension is, I can't remember right off hand.) Keep that somewhere you can find it, and then open it up and save it as a new project name anytime you need a project with that set up.
I do this for my projects because there is another editor that I work with that doesn't keep his browser very organized, so it was hard for me to figure out where he put everything when it was my turn to come in and finish the edit. So I created a template that had bins called "Graphics" "Animations" "Music" "Sound efx" "Sequences" etc.
Helps keeps things orderly.
Hope that helps
Chris

Creating a new project with custom fields using web services

I've been trying unsuccessfully for the last week or so to successfully create a new project from web services and I believe the main problem that I've been running into is that one of the required fields is a custom field. I've tried creating the Project
in a couple of different ways and haven't had any success up to this point, so any help would be appreciated. I've tried creating it with both a REST call to /_api/ProjectServer/Projects and a SOAP call to /_vti_bin/PSI/Project.asmx. Below are the best shots
I've made at the two different calls with the errors I received. If anyone has any leads on the best way to do this the help would be appreciated!
REST POST /_api/ProjectServer/Projects
'odata.type' : 'PS.PublishedProject',
'Name' : 'OData Name',
'Custom_9d77d62aa92e4d40adc8446c90eb7456' : "O&M"
Response
error: {
code: "11713, Microsoft.ProjectServer.PJClientCallableException"
message: {
lang: "en-US"
value: "PJClientCallableException: CustomFieldRequiredValueNotProvided CustomFieldRequiredValueNotProvided mdpropuid = 9d77d62a-a92e-4d40-adc8-446c90eb7456"
SOAP POST /_vti_bin/PSI/Project.asmx
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:proj="http://schemas.microsoft.com/office/project/server/webservices/Project/" xmlns:projds="http://schemas.microsoft.com/office/project/server/webservices/ProjectDataSet/">
<soapenv:Header />
<soapenv:Body>
<proj:QueueCreateProject>
<proj:dataset>
<ProjectDataSet xmlns="http://schemas.microsoft.com/office/project/server/webservices/ProjectDataSet/">
<Project>
<PROJ_UID>e1c2d38b-1529-4128-b707-42a94045e55b</PROJ_UID>
<PROJ_NAME>Proj Dept Test 2</PROJ_NAME>
<PROJ_TYPE>0</PROJ_TYPE>
</Project>
<ProjectCustomFields>
<CUSTOM_FIELD_UID>4802a711-62a0-4f84-8e08-c7d22daadb5b</CUSTOM_FIELD_UID>
<PROJ_UID>e1c2d38b-1529-4128-b707-42a94045e55b</PROJ_UID>
<MD_PROP_UID>9d77d62a-a92e-4d40-adc8-446c90eb7456</MD_PROP_UID>
<FIELD_TYPE_ENUM>21</FIELD_TYPE_ENUM>
<CODE_VALUE>a47930d6-b89d-4f3a-b4e3-522015fe82a1</CODE_VALUE>
</ProjectCustomFields>
</ProjectDataSet>
</proj:dataset>
<proj:validateOnly>true</proj:validateOnly>
</proj:QueueCreateProject>
</soapenv:Body>
</soapenv:Envelope>
Response
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Body>
<s:Fault>
<faultcode>s:Server</faultcode>
<faultstring xml:lang="en-US">ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructor to access all error information</faultstring>
<detail>
<errinfo>
<general>
<class name="General Unhandled Exception in _Project.QueueCreateProject_">
<error id="42" name="GeneralUnhandledException" uid="184feeaf-906a-e411-9b2a-00155d388b02" Exception="System.Data.StrongTypingException: The value for column 'PROJ_TYPE' in table 'Project' is DBNull. ---> System.InvalidCastException: Specified cast is not valid.
at Microsoft.Office.Project.Server.Schema.ProjectDataSet.ProjectRow.get_PROJ_TYPE()
--- End of inner exception stack trace ---
at Microsoft.Office.Project.Server.Schema.ProjectDataSet.ProjectRow.get_PROJ_TYPE()
at Microsoft.Office.Project.Server.BusinessLayer.Project.FixupProjectType(ProjectDataSet projDS)
at Microsoft.Office.Project.Server.BusinessLayer.Project.QueueCreateProject(Guid jobUid, ProjectDataSet dataset, Boolean validateOnly)
at Microsoft.Office.Project.Server.Wcf.Implementation.ProjectImpl.<>c__DisplayClasse.<QueueCreateProject>b__d()
at Microsoft.Office.Project.Server.Wcf.Implementation.WcfMethodInvocation.InvokeBusinessObjectMethod(String businessObjectName, String methodName, IEnumerable`1 actions)"/>
</class>
</general>
</errinfo>
</detail>
</s:Fault>
</s:Body>
</s:Envelope>

Julie,
You can create the fields that are project specifc & you can create fields that apply to all projects but have specific options for projects. Your goal is to create fields that are specific to each project, but right now you get all fields from you old project - is this correct?
From your description below it appears that the fields in your original project are marked as applied to all projects & hence when you create a new project they are inherited. If you mark those fields as applied to certain project & then create a new project those fields will not be inherited.
But you are right in the sense that it is limiting that there is no multi-select for "applies to" field.

Crashing and 'out of memory' issues on new system

having 'out of memory' errors and crashing while rendering on new FCP system. Here are system specs:
Two ATI Radeon HD 5770 video cards
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.4 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per core): 256 KB
L3 Cache (per processor): 12 MB
Memory: 16 GB

Pull one of the video cards.
FCP hates dual card systems.
x

Cannot seem to open a new project with a height less than 100px

Hi
Surely there is not a minimum limit on the size of project I can work with in Captivate. I'm trying to open a new project that is 968 x 30 px but it will not let me and defaults back to 100px height.
Is there a way for me to achieve this or is this a flaw in Captivate? I'd be suprised if theu have set a limit on minimum height!
Cheers
D

Hi there
Not sure if it's a "flaw", but it's been that way for as long as I can recall. Keep in mind that Captivate is really designed for capturing screens and creating things that are substantially larger than 100 px.
If you disagree with this and feel it should change, please consider submitting a Wish Form to ask for a change. (Link is in my sig)
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Out of memory on a new project with rushes only

Similar Messages

Maybe you are looking for